mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 20:03:47 +00:00
Wiki Update 8 - Lorita (#10094)
* Wiki Home Fix process-others VFA test * Add wall GIFs and update documentation * Quality Overhangs Wiki Basic Update README.md Update Home.md * Better only one wall * Add infill ghosting image and update wall order * Updates process options * Fix calibration step numbering in documentation Corrected the step numbers in the calibration order list to maintain sequential order. * Update Calibration.md * Update wall and surface quality docs with images and details * Revise Linux build instructions and restructure sections Co-Authored-By: cefiar <cefiar@gmail.com> * APA Clarify compatibility notes Co-Authored-By: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com> * Removed Tolerance test from calibration guide. Keeped as note Co-Authored-By: Noisyfox <timemanager.rick@gmail.com> * Copilot Review --------- Co-authored-by: cefiar <cefiar@gmail.com> Co-authored-by: dewi-ny-je <2866139+dewi-ny-je@users.noreply.github.com> Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
This commit is contained in:
Ian Bassi
@@ -21,41 +21,43 @@ The recommended order for calibration is as follows:
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/Flow-Rate/flowrate-6.jpg?raw=true" alt="flowrate-6" height="200">
|
||||
|
||||
1. **[Pressure Advance](pressure-advance-calib):** Calibrate the pressure advance settings to improve print quality and reduce artifacts caused by pressure fluctuations in the nozzle.
|
||||
3. **[Pressure Advance](pressure-advance-calib):** Calibrate the pressure advance settings to improve print quality and reduce artifacts caused by pressure fluctuations in the nozzle.
|
||||
|
||||
- **[Adaptive Pressure Advance](adaptive-pressure-advance-calib):** This is an advanced calibration technique that can be used to further optimize the pressure advance settings for different print speeds and geometries.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/pa/pa-tower.jpg?raw=true" alt="pa-tower" height="200">
|
||||
|
||||
2. **[Retraction](retraction-calib):** Calibrate the retraction settings to minimize stringing and improve print quality. Doing this after Flow and Pressure Advance calibration is recommended, as it ensures that the printer is already set up for optimal extrusion.
|
||||
4. **[Retraction](retraction-calib):** Calibrate the retraction settings to minimize stringing and improve print quality. Doing this after Flow and Pressure Advance calibration is recommended, as it ensures that the printer is already set up for optimal extrusion.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/retraction/retraction_test_print.jpg?raw=true" alt="Retraction" height="200">
|
||||
|
||||
3. **[Tolerance](tolerance-calib):** Calibrate the tolerances of your printer to ensure that it can accurately reproduce the dimensions of the model being printed. This is important for achieving a good fit between parts and for ensuring that the final print meets the desired specifications.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/Tolerance/OrcaToleranceTes_m6.jpg?raw=true" alt="Tolerance" height="200">
|
||||
|
||||
4. **[Max Volumetric Speed](volumetric-speed-calib):** Calibrate the maximum volumetric speed of the filament. This is important for ensuring that the printer can handle the flow rate of the filament without causing issues such as under-extrusion or over-extrusion.
|
||||
5. **[Max Volumetric Speed](volumetric-speed-calib):** Calibrate the maximum volumetric speed of the filament. This is important for ensuring that the printer can handle the flow rate of the filament without causing issues such as under-extrusion or over-extrusion.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/MVF/mvf_measurement_point.jpg?raw=true" alt="Max_Volumetric_Speed" height="200">
|
||||
|
||||
5. **[Cornering](cornering-calib):** Calibrate the Jerk/Junction Deviation settings to improve print quality and reduce artifacts caused by sharp corners and changes in direction.
|
||||
6. **[Cornering](cornering-calib):** Calibrate the Jerk/Junction Deviation settings to improve print quality and reduce artifacts caused by sharp corners and changes in direction.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/JunctionDeviation/jd_second_print_measure.jpg?raw=true" alt="Cornering" height="200">
|
||||
|
||||
6. **[Input Shaping](input-shaping-calib):** This is an advanced calibration technique that can be used to reduce ringing and improve print quality by compensating for mechanical vibrations in the printer.
|
||||
7. **[Input Shaping](input-shaping-calib):** This is an advanced calibration technique that can be used to reduce ringing and improve print quality by compensating for mechanical vibrations in the printer.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/InputShaping/IS_damp_marlin_print_measure.jpg?raw=true" alt="Input_Shaping" height="200">
|
||||
|
||||
7. **[VFA](vfa-calib):** A VFA speed test is available to find resonance speeds.
|
||||
8. **[VFA](vfa-calib):** A VFA speed test is available to find resonance speeds.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/vfa/vfa_test_print.jpg?raw=true" alt="vfa_test_print" height="200">
|
||||
|
||||
---
|
||||
|
||||
**[Tolerance](tolerance-calib):** Calibrate the tolerances of your printer to ensure that it can accurately reproduce the dimensions of the model being printed. This is important for achieving a good fit between parts and for ensuring that the final print meets the desired specifications.
|
||||
|
||||
<img src="https://github.com/SoftFever/OrcaSlicer/blob/main/doc/images/Tolerance/OrcaToleranceTes_m6.jpg?raw=true" alt="Tolerance" height="200">
|
||||
|
||||
---
|
||||
|
||||
_Credits:_
|
||||
|
||||
- _The Flowrate test and retraction test is inspired by [SuperSlicer](https://github.com/supermerill/SuperSlicer)._
|
||||
- _The Flow test and retraction test is inspired by [SuperSlicer](https://github.com/supermerill/SuperSlicer)._
|
||||
- _The PA Line method is inspired by [K-factor Calibration Pattern](https://marlinfw.org/tools/lin_advance/k-factor.html)._
|
||||
- _The PA Tower method is inspired by [Klipper](https://www.klipper3d.org/Pressure_Advance.html)._
|
||||
- _The temp tower model is remixed from [Smart compact temperature calibration tower](https://www.thingiverse.com/thing:2729076)._
|
||||
|
||||
Reference in New Issue
Block a user