Optimised for the Artillery M1 Pro printer (#12885)

* Optimised for the Artillery M1 Pro printer

* tidy up

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

resources/profiles/Artillery/process/0.06mm High Quality @Artillery M1 Pro 0.2 nozzle.json

@@ -5,8 +5,6 @@
     "from": "system",
     "instantiation": "true",
     "initial_layer_speed": "30",
-    "is_custom_defined": "0",
     "layer_height": "0.06",
-    "print_settings_id": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
-}
+    "print_settings_id": "0.06mm High Quality @Artillery M1 Pro 0.2 nozzle"
+}

resources/profiles/Artillery/process/0.06mm Standard @Artillery M1 Pro 0.2 nozzle.json

@@ -6,10 +6,8 @@
     "instantiation": "true",
     "default_acceleration": "10000",
     "initial_layer_speed": "30",
-    "is_custom_defined": "0",
     "layer_height": "0.06",
     "outer_wall_acceleration": "5000",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.06mm Standard @Artillery M1 Pro 0.2 nozzle"
 }

resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json

@@ -9,7 +9,6 @@
     "gap_infill_speed": "350",
     "initial_layer_infill_speed": "80",
     "inner_wall_speed": "350",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
@@ -19,7 +18,6 @@
     "top_surface_pattern": "monotonicline",
     "travel_speed": "500",
     "tree_support_branch_diameter_double_wall": "1",
-    "version": "2.1.2.2",
     "wall_generator": "classic",
     "initial_layer_print_height": "0.2",
     "internal_solid_infill_line_width": "0.42",
@@ -60,7 +58,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -142,7 +140,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "25",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -169,7 +167,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle.json

@@ -10,6 +10,5 @@
     "outer_wall_line_width": "0.42",
     "print_settings_id": "0.08mm Extra Fine @Artillery X4Plus 0.4 nozzle",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle.json

@@ -10,6 +10,5 @@
     "outer_wall_line_width": "0.42",
     "print_settings_id": "0.08mm Extra Fine @Artillery X4Pro 0.4 nozzle",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json

@@ -99,7 +99,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.08",
     "line_width": "0.22",
@@ -264,7 +263,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.1.1.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -8,12 +8,10 @@
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode",
     "gap_infill_speed": "210",
     "initial_layer_infill_speed": "80",
-    "is_custom_defined": "0",
     "print_settings_id": "0.08mm High Quality @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
     "top_shell_layers": "9",
     "travel_speed": "500",
-    "version": "2.1.1.0",
     "initial_layer_print_height": "0.2",
     "inner_wall_speed": "120",
     "internal_solid_infill_line_width": "0.42",
@@ -58,7 +56,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -138,7 +136,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "25",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Plus 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.08mm High Quality @Artillery X4Plus 0.4 nozzle",
     "sparse_infill_speed": "150",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.08mm High Quality @Artillery X4Pro 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.08mm High Quality @Artillery X4Pro 0.4 nozzle",
     "sparse_infill_speed": "150",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.08mm Standard @Artillery M1 Pro 0.2 nozzle.json

@@ -7,6 +7,5 @@
     "default_acceleration": "10000",
     "outer_wall_acceleration": "5000",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.08mm Standard @Artillery M1 Pro 0.2 nozzle"
 }

resources/profiles/Artillery/process/0.10mm High Quality @Artillery M1 Pro 0.2 nozzle.json

@@ -5,6 +5,5 @@
     "from": "system",
     "instantiation": "true",
     "layer_height": "0.1",
-    "print_settings_id": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.10mm High Quality @Artillery M1 Pro 0.2 nozzle"
 }

resources/profiles/Artillery/process/0.10mm Standard @Artillery M1 Pro 0.2 nozzle.json

@@ -5,13 +5,11 @@
     "from": "system",
     "instantiation": "true",
     "default_acceleration": "10000",
-    "is_custom_defined": "0",
     "layer_height": "0.1",
     "outer_wall_acceleration": "5000",
     "outer_wall_speed": "120",
     "print_settings_id": "0.10mm Standard @Artillery M1 Pro 0.2 nozzle",
     "sparse_infill_pattern": "zig-zag",
     "support_style": "default",
-    "support_type": "tree(auto)",
-    "version": "2.1.1.0"
+    "support_type": "tree(auto)"
 }

resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json

@@ -10,7 +10,6 @@
     "gap_infill_speed": "350",
     "initial_layer_infill_speed": "80",
     "inner_wall_speed": "350",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.12mm Fine @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
@@ -19,7 +18,6 @@
     "top_shell_thickness": "0.6",
     "top_surface_pattern": "monotonicline",
     "travel_speed": "700",
-    "version": "2.1.2.2",
     "initial_layer_print_height": "0.2",
     "internal_solid_infill_line_width": "0.42",
     "layer_height": "0.12",
@@ -58,7 +56,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -140,7 +138,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "20",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -167,7 +165,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-	"top_bottom_infill_wall_overlap":"15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Plus 0.4 nozzle.json

@@ -10,6 +10,5 @@
     "outer_wall_line_width": "0.42",
     "print_settings_id": "0.12mm Fine @Artillery X4Plus 0.4 nozzle",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.12mm Fine @Artillery X4Pro 0.4 nozzle.json

@@ -10,6 +10,5 @@
     "outer_wall_line_width": "0.42",
     "print_settings_id": "0.12mm Fine @Artillery X4Pro 0.4 nozzle",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -9,13 +9,11 @@
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode",
     "gap_infill_speed": "230",
     "inner_wall_speed": "150",
-    "is_custom_defined": "0",
     "print_settings_id": "0.12mm High Quality @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
     "top_shell_thickness": "0.6",
     "top_surface_pattern": "monotonicline",
     "travel_speed": "500",
-    "version": "2.1.2.2",
     "initial_layer_print_height": "0.2",
     "internal_solid_infill_line_width": "0.42",
     "internal_solid_infill_speed": "180",
@@ -58,7 +56,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -139,7 +137,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "20",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -166,7 +164,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Plus 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.12mm High Quality @Artillery X4Plus 0.4 nozzle",
     "sparse_infill_speed": "180",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.12mm High Quality @Artillery X4Pro 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.12mm High Quality @Artillery X4Pro 0.4 nozzle",
     "sparse_infill_speed": "150",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.12mm Standard @Artillery M1 Pro 0.2 nozzle.json

@@ -8,6 +8,5 @@
     "layer_height": "0.12",
     "outer_wall_acceleration": "5000",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.12mm Standard @Artillery M1 Pro 0.2 nozzle"
 }

resources/profiles/Artillery/process/0.14mm Standard @Artillery M1 Pro 0.2 nozzle.json

@@ -5,10 +5,8 @@
     "from": "system",
     "instantiation": "true",
     "default_acceleration": "10000",
-    "is_custom_defined": "0",
     "layer_height": "0.14",
     "outer_wall_acceleration": "5000",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.14mm Standard @Artillery M1 Pro 0.2 nozzle"
 }

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.15mm Optimal @Artillery Genius Pro",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.15",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0.15",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "2",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.15",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius Pro 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.15mm Optimal @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.15",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.15mm Optimal @Artillery Genius",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.15",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.15",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.15mm Optimal @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.15",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.15",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json

@@ -10,7 +10,6 @@
     "gap_infill_speed": "200",
     "initial_layer_infill_speed": "80",
     "internal_solid_infill_speed": "200",
-    "is_custom_defined": "0",
     "print_settings_id": "0.16mm High Quality @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
     "sparse_infill_speed": "200",
@@ -18,7 +17,6 @@
     "top_shell_thickness": "1",
     "top_surface_pattern": "monotonicline",
     "travel_speed": "500",
-    "version": "2.1.2.2",
     "initial_layer_print_height": "0.2",
     "inner_wall_speed": "150",
     "internal_solid_infill_line_width": "0.42",
@@ -60,7 +58,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -101,7 +99,7 @@
     "internal_bridge_flow": "1",
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
-    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_pattern": "zig-zag",
     "ironing_angle": "-1",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
@@ -140,7 +138,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "20",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -167,7 +165,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Plus 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.16mm High Quality @Artillery X4Plus 0.4 nozzle",
     "sparse_infill_speed": "180",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.16mm High Quality @Artillery X4Pro 0.4 nozzle.json

@@ -16,6 +16,5 @@
     "print_settings_id": "0.16mm High Quality @Artillery X4Pro 0.4 nozzle",
     "sparse_infill_speed": "180",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.16mm Optimal @Artillery Hornet",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.16",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.16",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Hornet 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json

@@ -10,7 +10,6 @@
     "initial_layer_infill_speed": "80",
     "inner_wall_speed": "300",
     "internal_solid_infill_speed": "300",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.16mm Optimal @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
@@ -22,7 +21,6 @@
     "top_surface_pattern": "monotonicline",
     "travel_speed": "500",
     "tree_support_branch_diameter_double_wall": "1",
-    "version": "2.1.2.2",
     "initial_layer_print_height": "0.2",
     "internal_solid_infill_line_width": "0.42",
     "layer_height": "0.16",
@@ -62,7 +60,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -103,7 +101,7 @@
     "internal_bridge_flow": "1",
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
-    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_pattern": "zig-zag",
     "ironing_angle": "-1",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
@@ -143,7 +141,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "20",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -170,7 +168,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-	"top_bottom_infill_wall_overlap":"15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.16mm Optimal @Artillery X1",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.16",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.16",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Sidewinder X1 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.16mm Optimal @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.16",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.16",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.16mm Optimal @Artillery X4Pro 0.4 nozzle.json

@@ -12,6 +12,5 @@
     "print_settings_id": "0.16mm Optimal @Artillery X4Pro 0.4 nozzle",
     "sparse_infill_speed": "180",
     "support_line_width": "0.42",
-    "top_surface_line_width": "0.42",
-    "version": "2.0.2.0"
+    "top_surface_line_width": "0.42"
 }

resources/profiles/Artillery/process/0.18mm Standard @Artillery M1 Pro 0.6 nozzle.json

@@ -2,10 +2,9 @@
     "type": "process",
     "name": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle",
     "inherits": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle",
+    "from": "system",
     "instantiation": "true",
-    "is_custom_defined": "0",
     "layer_height": "0.18",
     "print_settings_id": "0.18mm Standard @Artillery M1 Pro 0.6 nozzle",
-    "slow_down_layers": "3",
-    "version": "2.1.1.0"
+    "slow_down_layers": "3"
 }

resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Artillery Genius Pro",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.2",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0.15",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "2",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "2",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "3",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius Pro 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Artillery Genius",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.2",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Artillery Hornet",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.2",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Hornet 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json

@@ -11,7 +11,6 @@
     "gap_infill_speed": "250",
     "initial_layer_infill_speed": "80",
     "inner_wall_speed": "300",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.20mm Standard @Artillery M1 Pro 0.4 nozzle",
     "reduce_crossing_wall": "0",
@@ -27,7 +26,6 @@
     "travel_speed": "700",
     "tree_support_branch_diameter_angle": "5",
     "tree_support_branch_diameter_double_wall": "0",
-    "version": "2.1.2.2",
     "wall_generator": "arachne",
     "accel_to_decel_enable": "1",
     "accel_to_decel_factor": "50%",
@@ -103,7 +101,7 @@
     "internal_bridge_speed": "150",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_line_width": "0.42",
-    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_pattern": "zig-zag",
     "internal_solid_infill_speed": "250",
     "ironing_angle": "-1",
     "ironing_flow": "15%",
@@ -146,7 +144,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "35",
+    "prime_tower_width": "17",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -172,7 +170,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_height": "1",
     "skirt_loops": "0",
     "skirt_speed": "50",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "25%"
+    "top_bottom_infill_wall_overlap": "25%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Artillery X1",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.2",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "4",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Sidewinder X1 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Artillery X2",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.2",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "4",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Sidewinder X2 0.4 nozzle"
-    ]
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.20mm Standard @Artillery X2",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.2",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.2",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X2 0.4 nozzle"
+	]
 }

resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json

@@ -93,7 +93,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.2",
     "line_width": "0.42",
@@ -249,7 +248,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.0.2.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json

@@ -93,7 +93,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.2",
     "line_width": "0.42",
@@ -249,7 +248,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.0.2.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json

@@ -93,7 +93,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.2",
     "line_width": "0.42",
@@ -249,7 +248,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.0.2.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json

@@ -93,7 +93,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.2",
     "line_width": "0.42",
@@ -249,7 +248,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.0.2.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json

@@ -8,7 +8,6 @@
     "default_acceleration": "10000",
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode",
     "gap_infill_speed": "250",
-    "is_custom_defined": "0",
     "print_settings_id": "0.20mm Strength @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
     "support_style": "default",
@@ -18,7 +17,6 @@
     "travel_speed": "500",
     "tree_support_branch_diameter_angle": "15",
     "tree_support_branch_diameter_double_wall": "1",
-    "version": "2.1.2.2",
     "outer_wall_speed": "60",
     "wall_loops": "6",
     "accel_to_decel_enable": "1",
@@ -53,7 +51,7 @@
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -141,7 +139,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "17",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -168,7 +166,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "25%"
+    "top_bottom_infill_wall_overlap": "25%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Plus 0.4 nozzle.json

@@ -6,6 +6,5 @@
     "instantiation": "true",
     "outer_wall_speed": "60",
     "print_settings_id": "0.20mm Strength @Artillery X4Plus 0.4 nozzle",
-    "version": "2.0.2.0",
     "wall_loops": "6"
 }

resources/profiles/Artillery/process/0.20mm Strength @Artillery X4Pro 0.4 nozzle.json

@@ -6,6 +6,5 @@
     "instantiation": "true",
     "outer_wall_speed": "60",
     "print_settings_id": "0.20mm Strength @Artillery X4Pro 0.4 nozzle",
-    "version": "2.0.2.0",
     "wall_loops": "6"
 }

resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.24mm Draft @Artillery Hornet",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.24",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.24",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Hornet 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Artillery Hornet",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.24",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Hornet 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json

@@ -8,7 +8,6 @@
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode",
     "gap_infill_speed": "200",
     "inner_wall_speed": "300",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.24mm Draft @Artillery M1 Pro 0.4 nozzle",
     "slow_down_layers": "3",
@@ -17,7 +16,6 @@
     "top_shell_thickness": "1",
     "tree_support_branch_diameter_angle": "15",
     "tree_support_branch_diameter_double_wall": "1",
-    "version": "2.1.1.0",
     "initial_layer_print_height": "0.2",
     "layer_height": "0.24",
     "accel_to_decel_enable": "1",
@@ -31,7 +29,7 @@
     "bridge_density": "100%",
     "bridge_flow": "1",
     "bridge_no_support": "0",
-    "bridge_speed": "70",
+    "bridge_speed": "50",
     "brim_ears_detection_length": "1",
     "brim_ears_max_angle": "125",
     "brim_object_gap": "0",
@@ -42,18 +40,18 @@
     ],
     "compatible_printers_condition": "",
     "counterbore_hole_bridging": "none",
-    "default_acceleration": "5000",
+    "default_acceleration": "10000",
     "default_jerk": "0",
     "detect_narrow_internal_solid_infill": "1",
     "detect_overhang_wall": "1",
     "detect_thin_wall": "1",
     "dont_filter_internal_bridges": "disabled",
     "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation": "0.15",
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -96,8 +94,8 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_line_width": "0.42",
-    "internal_solid_infill_pattern": "monotonic",
-    "internal_solid_infill_speed": "300",
+    "internal_solid_infill_pattern": "zig-zag",
+    "internal_solid_infill_speed": "230",
     "ironing_angle": "-1",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
@@ -117,7 +115,7 @@
     "min_feature_size": "25%",
     "min_length_factor": "0.5",
     "min_width_top_surface": "300%",
-    "minimum_sparse_infill_area": "10",
+    "minimum_sparse_infill_area": "15",
     "mmu_segmented_region_interlocking_depth": "0",
     "mmu_segmented_region_max_width": "0",
     "notes": "",
@@ -128,8 +126,8 @@
     "outer_wall_jerk": "9",
     "outer_wall_line_width": "0.42",
     "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "overhang_reverse": "0",
     "overhang_reverse_internal_only": "0",
@@ -138,7 +136,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "16",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -165,7 +163,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -194,7 +192,7 @@
     "sparse_infill_filament": "1",
     "sparse_infill_line_width": "0.45",
     "sparse_infill_pattern": "grid",
-    "sparse_infill_speed": "200",
+    "sparse_infill_speed": "230",
     "spiral_mode": "0",
     "spiral_mode_max_xy_smoothing": "200%",
     "spiral_mode_smooth": "0",
@@ -228,14 +226,14 @@
     "timelapse_type": "0",
     "top_shell_layers": "4",
     "top_solid_infill_flow_ratio": "1",
-    "top_surface_acceleration": "0",
+    "top_surface_acceleration": "2000",
     "top_surface_jerk": "9",
     "top_surface_line_width": "0.42",
-    "top_surface_pattern": "monotonic",
-    "top_surface_speed": "100",
-    "travel_acceleration": "0",
+    "top_surface_pattern": "monotonicline",
+    "top_surface_speed": "200",
+    "travel_acceleration": "10000",
     "travel_jerk": "12",
-    "travel_speed": "300",
+    "travel_speed": "500",
     "travel_speed_z": "0",
     "tree_support_adaptive_layer_height": "1",
     "tree_support_angle_slow": "25",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json

@@ -99,7 +99,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.24",
     "line_width": "0.62",
@@ -264,7 +263,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.1.1.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json

@@ -99,7 +99,6 @@
     "ironing_spacing": "0.1",
     "ironing_speed": "15",
     "ironing_type": "no ironing",
-    "is_custom_defined": "0",
     "is_infill_first": "0",
     "layer_height": "0.24",
     "line_width": "0.82",
@@ -264,7 +263,6 @@
     "tree_support_tip_diameter": "0.8",
     "tree_support_top_rate": "30%",
     "tree_support_wall_count": "0",
-    "version": "2.1.1.0",
     "wall_direction": "auto",
     "wall_distribution_count": "1",
     "wall_filament": "1",

resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.24mm Draft @Artillery X1",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.24",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.24",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "40",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Sidewinder X1 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.24mm Draft @Artillery X1",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.24",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "500",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.24",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "40",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "150",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Sidewinder X1 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Plus 0.4 nozzle.json

@@ -7,6 +7,5 @@
     "initial_layer_print_height": "0.2",
     "layer_height": "0.24",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle",
-    "version": "2.0.2.0"
+    "print_settings_id": "0.24mm Draft @Artillery X4Plus 0.4 nozzle"
 }

resources/profiles/Artillery/process/0.24mm Draft @Artillery X4Pro 0.4 nozzle.json

@@ -6,6 +6,5 @@
     "instantiation": "true",
     "initial_layer_print_height": "0.2",
     "layer_height": "0.24",
-    "print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle",
-    "version": "2.0.2.0"
+    "print_settings_id": "0.24mm Draft @Artillery X4Pro 0.4 nozzle"
 }

resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.6 nozzle.json

@@ -5,7 +5,5 @@
     "from": "system",
     "instantiation": "true",
     "detect_thin_wall": "0",
-    "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.6 nozzle"
 }

resources/profiles/Artillery/process/0.24mm Standard @Artillery M1 Pro 0.8 nozzle.json

@@ -5,7 +5,5 @@
     "from": "system",
     "instantiation": "true",
     "bottom_shell_layers": "3",
-    "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.24mm Standard @Artillery M1 Pro 0.8 nozzle"
 }

resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.25mm Draft @Artillery Genius Pro",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.25",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "2",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0.15",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "2",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.25",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "2",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius Pro 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.25mm Draft @Artillery Genius Pro",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.25",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "2",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "2",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius Pro 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json

@@ -1,108 +1,108 @@
 {
-    "type": "process",
-    "name": "0.25mm Draft @Artillery Genius",
-    "inherits": "fdm_process_common",
-    "from": "system",
-    "setting_id": "GP004",
-    "instantiation": "true",
-    "adaptive_layer_height": "1",
-    "reduce_crossing_wall": "0",
-    "layer_height": "0.25",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "7",
-    "bottom_shell_thickness": "0",
-    "bridge_flow": "1",
-    "bridge_speed": "70",
-    "brim_width": "0",
-    "brim_object_gap": "0",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "0",
-    "top_surface_acceleration": "0",
-    "bridge_no_support": "0",
-    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
-    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.5",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "crosshatch",
-    "initial_layer_acceleration": "0",
-    "travel_acceleration": "0",
-    "inner_wall_acceleration": "0",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.25",
-    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
-    "infill_wall_overlap": "15%",
-    "interface_shells": "0",
-    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
-    "ironing_speed": "15",
-    "ironing_type": "no ironing",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
-    "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
-    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "4",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "3",
-    "minimum_sparse_infill_area": "10",
-    "internal_solid_infill_line_width": "0",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "grid",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.25",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "1",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "3",
-    "support_interface_bottom_layers": "-1",
-    "support_interface_spacing": "1",
-    "support_interface_speed": "100%",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "60",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "50%",
-    "tree_support_branch_angle": "40",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "1",
-    "top_surface_pattern": "monotonicline",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "4",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "35%",
-    "initial_layer_infill_speed": "35%",
-    "outer_wall_speed": "60",
-    "inner_wall_speed": "60",
-    "internal_solid_infill_speed": "30",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "60",
-    "travel_speed": "110",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
-    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0",
-    "compatible_printers": [
-        "Artillery Genius 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"setting_id": "GP004",
+	"name": "0.25mm Draft @Artillery Genius",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_common",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.25",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"bridge_speed": "70",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"default_acceleration": "0",
+	"top_surface_acceleration": "0",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0",
+	"enable_arc_fitting": "0",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.5",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "crosshatch",
+	"initial_layer_acceleration": "0",
+	"travel_acceleration": "0",
+	"inner_wall_acceleration": "0",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "4",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "3",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_filament": "0",
+	"support_line_width": "0.4",
+	"support_interface_loop_pattern": "1",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "1",
+	"support_interface_speed": "100%",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_speed": "60",
+	"support_threshold_angle": "30",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_line_width": "0.4",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"initial_layer_speed": "35%",
+	"initial_layer_infill_speed": "35%",
+	"outer_wall_speed": "60",
+	"inner_wall_speed": "60",
+	"internal_solid_infill_speed": "30",
+	"top_surface_speed": "30",
+	"gap_infill_speed": "30",
+	"sparse_infill_speed": "60",
+	"travel_speed": "110",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Artillery Genius 0.4 nozzle"
+	]
+}

resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json

@@ -9,7 +9,6 @@
     "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_M1Pro.gcode",
     "gap_infill_speed": "200",
     "initial_layer_infill_speed": "80",
-    "is_custom_defined": "0",
     "outer_wall_speed": "200",
     "print_settings_id": "0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle",
     "reduce_crossing_wall": "1",
@@ -21,7 +20,6 @@
     "travel_speed": "500",
     "tree_support_branch_diameter_angle": "15",
     "tree_support_branch_diameter_double_wall": "1",
-    "version": "2.1.1.0",
     "initial_layer_print_height": "0.2",
     "layer_height": "0.28",
     "accel_to_decel_enable": "1",
@@ -35,7 +33,7 @@
     "bridge_density": "100%",
     "bridge_flow": "1",
     "bridge_no_support": "0",
-    "bridge_speed": "70",
+    "bridge_speed": "50",
     "brim_ears_detection_length": "1",
     "brim_ears_max_angle": "125",
     "brim_object_gap": "0",
@@ -52,11 +50,11 @@
     "detect_thin_wall": "1",
     "dont_filter_internal_bridges": "disabled",
     "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation": "0.15",
     "elefant_foot_compensation_layers": "1",
     "enable_arc_fitting": "0",
     "enable_overhang_speed": "1",
-    "enable_prime_tower": "0",
+    "enable_prime_tower": "1",
     "enable_support": "0",
     "enforce_support_layers": "0",
     "ensure_vertical_shell_thickness": "ensure_all",
@@ -84,7 +82,7 @@
     "infill_direction": "45",
     "infill_jerk": "9",
     "infill_wall_overlap": "15%",
-    "initial_layer_acceleration": "0",
+    "initial_layer_acceleration": "500",
     "initial_layer_jerk": "9",
     "initial_layer_line_width": "0.5",
     "initial_layer_min_bead_width": "85%",
@@ -99,8 +97,8 @@
     "internal_bridge_speed": "150%",
     "internal_solid_infill_acceleration": "100%",
     "internal_solid_infill_line_width": "0.42",
-    "internal_solid_infill_pattern": "monotonic",
-    "internal_solid_infill_speed": "300",
+    "internal_solid_infill_pattern": "zig-zag",
+    "internal_solid_infill_speed": "200",
     "ironing_angle": "-1",
     "ironing_flow": "15%",
     "ironing_pattern": "zig-zag",
@@ -131,8 +129,8 @@
     "outer_wall_jerk": "9",
     "outer_wall_line_width": "0.42",
     "overhang_1_4_speed": "0",
-    "overhang_2_4_speed": "20",
-    "overhang_3_4_speed": "15",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "overhang_reverse": "0",
     "overhang_reverse_internal_only": "0",
@@ -141,7 +139,7 @@
     "post_process": [],
     "precise_outer_wall": "0",
     "prime_tower_brim_width": "3",
-    "prime_tower_width": "60",
+    "prime_tower_width": "15",
     "prime_volume": "45",
     "print_flow_ratio": "1",
     "print_order": "default",
@@ -167,7 +165,7 @@
     "seam_slope_start_height": "0",
     "seam_slope_steps": "10",
     "seam_slope_type": "none",
-    "single_extruder_multi_material_priming": "1",
+    "single_extruder_multi_material_priming": "0",
     "skirt_distance": "2",
     "skirt_height": "1",
     "skirt_loops": "0",
@@ -230,11 +228,11 @@
     "timelapse_type": "0",
     "top_shell_layers": "4",
     "top_solid_infill_flow_ratio": "1",
-    "top_surface_acceleration": "0",
+    "top_surface_acceleration": "2000",
     "top_surface_jerk": "9",
     "top_surface_line_width": "0.42",
-    "top_surface_speed": "100",
-    "travel_acceleration": "0",
+    "top_surface_speed": "200",
+    "travel_acceleration": "10000",
     "travel_jerk": "12",
     "travel_speed_z": "0",
     "tree_support_adaptive_layer_height": "1",
@@ -264,7 +262,7 @@
     "wipe_speed": "80%",
     "wipe_tower_bridging": "10",
     "wipe_tower_cone_angle": "0",
-    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extra_spacing": "110%",
     "wipe_tower_extruder": "0",
     "wipe_tower_no_sparse_layers": "0",
     "wipe_tower_rotation_angle": "0",
@@ -282,5 +280,6 @@
     ],
     "xy_contour_compensation": "0",
     "xy_hole_compensation": "0",
-    "top_bottom_infill_wall_overlap": "15%"
+    "top_bottom_infill_wall_overlap": "15%",
+    "wipe_tower_wall_type": "rib"
 }

resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle.json

@@ -7,6 +7,5 @@
     "initial_layer_print_height": "0.2",
     "layer_height": "0.28",
     "outer_wall_speed": "120",
-    "print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle",
-    "version": "2.0.2.0"
+    "print_settings_id": "0.28mm Extra Draft @Artillery X4Plus 0.4 nozzle"
 }

resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle.json

@@ -6,6 +6,5 @@
     "instantiation": "true",
     "initial_layer_print_height": "0.2",
     "layer_height": "0.28",
-    "print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle",
-    "version": "2.0.2.0"
+    "print_settings_id": "0.28mm Extra Draft @Artillery X4Pro 0.4 nozzle"
 }

resources/profiles/Artillery/process/0.30mm Standard @Artillery M1 Pro 0.6 nozzle.json

@@ -6,7 +6,5 @@
     "instantiation": "true",
     "detect_thin_wall": "0",
     "layer_height": "0.3",
-    "print_settings_id": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.30mm Standard @Artillery M1 Pro 0.6 nozzle"
 }

resources/profiles/Artillery/process/0.30mm Strength @Artillery M1 Pro 0.6 nozzle.json

@@ -6,10 +6,8 @@
     "instantiation": "true",
     "initial_layer_infill_speed": "55",
     "initial_layer_speed": "35",
-    "is_custom_defined": "0",
     "layer_height": "0.3",
     "print_settings_id": "0.30mm Strength @Artillery M1 Pro 0.6 nozzle",
     "sparse_infill_density": "25%",
-    "version": "2.1.1.0",
     "wall_loops": "4"
 }

resources/profiles/Artillery/process/0.32mm Standard @Artillery M1 Pro 0.8 nozzle.json

@@ -5,8 +5,6 @@
     "from": "system",
     "instantiation": "true",
     "bottom_shell_layers": "3",
-    "is_custom_defined": "0",
     "layer_height": "0.32",
-    "print_settings_id": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.32mm Standard @Artillery M1 Pro 0.8 nozzle"
 }

resources/profiles/Artillery/process/0.36mm Standard @Artillery M1 Pro 0.6 nozzle.json

@@ -2,9 +2,8 @@
     "type": "process",
     "name": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle",
     "inherits": "0.24mm Draft @Artillery M1 Pro 0.6 nozzle",
+    "from": "system",
     "instantiation": "true",
-    "is_custom_defined": "0",
     "layer_height": "0.36",
-    "print_settings_id": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.36mm Standard @Artillery M1 Pro 0.6 nozzle"
 }

resources/profiles/Artillery/process/0.40mm Standard @Artillery M1 Pro 0.8 nozzle.json

@@ -5,8 +5,6 @@
     "from": "system",
     "instantiation": "true",
     "bottom_shell_layers": "3",
-    "is_custom_defined": "0",
     "layer_height": "0.4",
-    "print_settings_id": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.40mm Standard @Artillery M1 Pro 0.8 nozzle"
 }

resources/profiles/Artillery/process/0.42mm Standard @Artillery M1 Pro 0.6 nozzle.json

@@ -5,7 +5,5 @@
     "from": "system",
     "instantiation": "true",
     "layer_height": "0.42",
-    "print_settings_id": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "print_settings_id": "0.42mm Standard @Artillery M1 Pro 0.6 nozzle"
 }

resources/profiles/Artillery/process/0.48mm Standard @Artillery M1 Pro 0.8 nozzle.json

@@ -7,7 +7,5 @@
     "bottom_shell_layers": "3",
     "layer_height": "0.48",
     "print_settings_id": "0.48mm Standard @Artillery M1 Pro 0.8 nozzle",
-    "slow_down_layers": "3",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "slow_down_layers": "3"
 }

resources/profiles/Artillery/process/0.56mm Standard @Artillery M1 Pro 0.8 nozzle.json

@@ -10,7 +10,5 @@
     "support_style": "default",
     "support_type": "tree(auto)",
     "tree_support_branch_diameter_angle": "15",
-    "tree_support_branch_diameter_double_wall": "1",
-    "is_custom_defined": "0",
-    "version": "2.1.1.0"
+    "tree_support_branch_diameter_double_wall": "1"
 }

resources/profiles/Artillery/process/fdm_process_common.json

@@ -23,6 +23,7 @@
     "bridge_no_support": "0",
     "draft_shield": "disabled",
     "elefant_foot_compensation": "0.15",
+    
     "outer_wall_line_width": "0.4",
     "wall_infill_order": "inner wall/outer wall/infill",
     "line_width": "0.4",
@@ -102,4 +103,5 @@
     "gap_infill_speed": "30",
     "travel_speed": "200",
     "enable_arc_fitting": "0"
-}
+
+}