From 3baec9cf2b526f5d53a9bfafb37cf52e3a43c932 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Thu, 17 Sep 2026 07:43:16 -0400
Subject: [PATCH] Add Snapmaker U1 high-flow nozzle profiles

Add separate HF presets for 0.2, 0.4, 0.6 and 0.8 mm nozzles, preserving
standard printer settings and machine G-code. Provide 141 HF filament
presets with volumetric ceilings 3x their non-HF baseline. Generic presets
inherit active Orca material definitions; remove unregistered Snorca-only
Generic profiles and their obsolete PLA Wood dependent.

Add 36 diameter-specific HF processes, all using Snorca's 0.4 mm HF speeds:
600 mm/s inner walls, 500 mm/s outer walls, and 600 mm/s solid/sparse infill.
Preserve other process settings and keep standard-nozzle speeds unchanged.
No extra-high-flow tier or C++ changes are included.

Native profile validation passed. HF material slicing checks passed, and
all 36 HF processes sliced with verified speed settings and tool changes.
Document calibration sources, flow ceilings and remaining physical tuning.

Generate canonical preset IDs and record the eight new Snapmaker generic
claims in the filament ID snapshot. Regenerate the vendor index.

Co-authored-by: Codex <noreply@openai.com>
---
 docs/HLSD/snapmaker-high-flow.md              |  92 +++
 resources/profiles/Snapmaker.json             | 726 +++++++++++++++++-
 ...ron ASA-CF08 @U1 0.4 High Flow nozzle.json |  17 +
 ...on PA12-CF10 @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PA6-CF20 @U1 0.4 High Flow nozzle.json |  17 +
 ...on PA612-ESD @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PETG-ESD @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PPS-GF20 @U1 0.4 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.2 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.4 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.6 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.8 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.2 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.4 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.6 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.8 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.6 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.8 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.2 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.4 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.6 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.8 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.2 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.4 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.6 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.8 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.2 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.4 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.6 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.8 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.6 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.8 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.4 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.6 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.8 High Flow nozzle.json |  17 +
 ...nchroma CoPE @U1 0.4 High Flow nozzle.json |  17 +
 ...anchroma PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Celestial @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Glow @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 +
 ...ma PLA Matte @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Neon @U1 0.4 High Flow nozzle.json |  17 +
 ...ma PLA Satin @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Silk @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 +
 ...A Temp Shift @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA UV Shift @U1 0.4 High Flow nozzle.json |  17 +
 ...yLite CosPLA @U1 0.4 High Flow nozzle.json |  17 +
 ...olyLite PETG @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...PolyLite PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...e PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...ite PLA Glow @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 +
 ...ite PLA Neon @U1 0.4 High Flow nozzle.json |  17 +
 ...Lite PLA Pro @U1 0.4 High Flow nozzle.json |  17 +
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...olyTerra PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 +
 ...lyTerra PLA+ @U1 0.4 High Flow nozzle.json |  17 +
 ...l PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...maker HT-PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...er HT-PLA-GF @U1 0.4 High Flow nozzle.json |  17 +
 ...lymaker PETG @U1 0.4 High Flow nozzle.json |  17 +
 ... PETG Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...olymaker PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PLA Pro @U1 0.4 High Flow nozzle.json |  17 +
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...k PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...h PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker ABS @U1 0.4 High Flow nozzle.json |  50 ++
 ...r ABS Benchy @U1 0.4 High Flow nozzle.json |  20 +
 ...napmaker ASA @U1 0.4 High Flow nozzle.json |  50 ++
 ...port For PLA @U1 0.2 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.6 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.8 High Flow nozzle.json |  17 +
 ...pmaker PA-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker PET @U1 0.4 High Flow nozzle.json |  17 +
 ...apmaker PETG @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PETG HF @U1 0.2 High Flow nozzle.json |  29 +
 ...aker PETG HF @U1 0.4 High Flow nozzle.json |  68 ++
 ...aker PETG HF @U1 0.6 High Flow nozzle.json |  29 +
 ...aker PETG HF @U1 0.8 High Flow nozzle.json |  29 +
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 +
 ...aker PETG-CF @U1 0.4 High Flow nozzle.json |  65 ++
 ...napmaker PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...er PLA Basic @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PLA Eco @U1 0.4 High Flow nozzle.json |  17 +
 ...ull Spectrum @U1 0.4 High Flow nozzle.json |  32 +
 ...ker PLA Glow @U1 0.4 High Flow nozzle.json |  26 +
 ...ker PLA Lite @U1 0.4 High Flow nozzle.json |  17 +
 ...er PLA Matte @U1 0.2 High Flow nozzle.json |  32 +
 ...er PLA Matte @U1 0.4 High Flow nozzle.json |  44 ++
 ...er PLA Matte @U1 0.6 High Flow nozzle.json |  32 +
 ...er PLA Matte @U1 0.8 High Flow nozzle.json |  32 +
 ...er PLA Metal @U1 0.4 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.2 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.4 High Flow nozzle.json |  23 +
 ...ker PLA Silk @U1 0.6 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.8 High Flow nozzle.json |  17 +
 ...LA SnapSpeed @U1 0.2 High Flow nozzle.json |  23 +
 ...LA SnapSpeed @U1 0.4 High Flow nozzle.json |  26 +
 ...LA SnapSpeed @U1 0.6 High Flow nozzle.json |  23 +
 ...LA SnapSpeed @U1 0.8 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  20 +
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 +
 ...ker PLA Wood @U1 0.4 High Flow nozzle.json |  26 +
 ...ker PLA Wood @U1 0.6 High Flow nozzle.json |  23 +
 ...ker PLA Wood @U1 0.8 High Flow nozzle.json |  23 +
 ...maker PLA-CF @U1 0.4 High Flow nozzle.json |  38 +
 ...maker PLA-CF @U1 0.6 High Flow nozzle.json |  29 +
 ...maker PLA-CF @U1 0.8 High Flow nozzle.json |  29 +
 ...napmaker PVA @U1 0.4 High Flow nozzle.json |  26 +
 ...napmaker PVA @U1 0.6 High Flow nozzle.json |  20 +
 ...napmaker PVA @U1 0.8 High Flow nozzle.json |  20 +
 ...napmaker TPE @U1 0.4 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.4 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.6 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.8 High Flow nozzle.json |  17 +
 ...aker TPU 95A @U1 0.4 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.4 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.6 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.8 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.6 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.8 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.4 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.6 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.8 High Flow nozzle.json |  17 +
 .../Snapmaker U1 (0.2 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.4 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.6 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.8 High Flow nozzle).json  |  18 +
 .../Snapmaker/machine/Snapmaker U1.json       |   2 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 184 files changed, 4574 insertions(+), 2 deletions(-)
 create mode 100644 docs/HLSD/snapmaker-high-flow.md
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json

diff --git a/docs/HLSD/snapmaker-high-flow.md b/docs/HLSD/snapmaker-high-flow.md
new file mode 100644
index 0000000000..63806cbd83
--- /dev/null
+++ b/docs/HLSD/snapmaker-high-flow.md
@@ -0,0 +1,92 @@
+# Snapmaker U1 high-flow profiles
+
+The U1 provides separate High Flow printer presets for 0.2, 0.4, 0.6 and
+0.8 mm nozzles. Each describes four tools fitted with the same diameter and
+high-flow nozzle. They inherit the corresponding standard printer, retaining
+its model identity, geometry, motion limits and machine G-code. Existing
+standard and mixed-diameter presets retain their settings and names.
+
+Enable the High Flow variants under Snapmaker U1 in the printer setup, select
+the matching printer, and select a filament whose name includes that diameter
+and `High Flow nozzle`. PLA SnapSpeed is the default material for these
+printers. Dedicated HF process presets preserve diameter-specific extrusion
+widths and layer heights while overriding the four print speeds below.
+Separate HF filament presets keep higher ceilings out of standard-nozzle
+material settings.
+
+## Process speeds
+
+All 36 HF process presets, across 0.2, 0.4, 0.6 and 0.8 mm nozzles,
+use the same requested speeds from Snorca's 0.4 mm HF Standard process:
+
+| Setting | Speed (mm/s) |
+| --- | ---: |
+| Inner walls | 600 |
+| Outer walls | 500 |
+| Internal solid infill | 600 |
+| Sparse infill | 600 |
+
+Each HF process inherits its standard diameter/layer-height counterpart,
+so geometry, accelerations, first-layer speeds, bridges, overhangs and other
+settings remain diameter-specific. Standard printers retain their original
+process speeds. HF printers default to the corresponding HF process.
+Volumetric ceilings and machine motion limits still cap actual speeds.
+
+## Calibration sources
+
+Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main`
+commit `b1831e5dcb`, under `resources/profiles/Snapmaker/filament/`. That fork
+uses `filament_flow_support: ["standard", "high_flow"]` to interpret paired
+values. Here the high-flow column is translated into ordinary single-valued
+filament overrides; the fork-specific keys and its profile restructuring are
+not imported. Companion temperature and pressure-advance enable settings are
+included. Machine and filament G-code remain inherited from this branch.
+
+The 14 materials with upstream HF overrides are ABS, ASA, PETG HF, PETG Translucent, PETG-CF,
+PLA Full Spectrum, PLA Glow, PLA Matte, PLA Silk, PLA SnapSpeed, PLA
+Translucent, PLA Wood, PLA-CF and PVA. Upstream's renamed Support For PLA is
+not assumed equivalent to the local Breakaway formulation.
+
+## Volumetric ceiling
+
+All 141 HF filament presets explicitly set maximum volumetric speed to three
+times the fully inherited non-HF material value. Diameter-specific parents
+are used where available; Generic HF presets inherit the active Orca filament
+library's `@System` definitions, which are shared across diameters. The parent
+is recorded in `inherits`. This replaces both the upstream 0.4 mm HF ceiling
+and the earlier capped estimates.
+
+The ceiling is a user-selected limit, not a measured hardware capability.
+Other process and machine limits still apply. Future changes to a parent
+preset's volumetric speed require updating its HF child; the multiplier is
+materialized in JSON, not evaluated by the slicer.
+
+## Other material settings
+
+The 24 additional HF material presets are **estimated starting points**, not
+manufacturer calibrations. They exist only where this branch already has a
+matching material and diameter. In particular, this does not make filled
+materials available to a 0.2 mm nozzle when no such standard profile exists.
+
+For each material with a paired 0.4 mm standard/HF value:
+
+- Flow ratio and pressure advance use the 0.4 mm HF/standard ratio,
+  rounded to four decimal places. A zero standard value is not divided by.
+- Nozzle and initial-layer temperatures use the 0.4 mm HF-minus-standard
+  difference, added to the diameter's original temperature.
+- Pressure advance follows the source's enable setting when its value is
+  adjusted. Diameter-specific retraction and cooling settings are retained.
+- Missing, single-valued or `nil` comparisons leave the diameter's original
+  setting intact.
+
+For example, PLA SnapSpeed has standard volumetric limits of 2 mm^3/s at
+0.2 mm and 20 mm^3/s at 0.4, 0.6 and 0.8 mm. Its HF ceilings are therefore
+6 and 60 mm^3/s respectively. The other 103 HF material presets retain their
+standard parent's temperature, retraction, cooling and pressure-advance
+settings, changing only the volumetric ceiling and profile metadata.
+Each HF preset includes its baseline and ceiling in its filament notes.
+Tune the material settings for the actual nozzle, filament and temperature.
+
+The separate preset design requires no C++ changes or new profile keys. It
+does not provide independent standard/HF selection per tool within one printer
+preset; a mixed hardware setup needs its own calibrated user preset.
diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 06acef0b0e..d415c7dadd 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.15",
+	"version": "02.04.00.16",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -194,6 +194,10 @@
 			"name": "fdm_process_idex",
 			"sub_path": "process/fdm_process_idex.json"
 		},
+		{
+			"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
 		{
 			"name": "fdm_process_U1_0.06_nozzle_0.2",
 			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
@@ -614,6 +618,146 @@
 			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
 			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json"
 		},
+		{
+			"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
 		{
 			"name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
 			"sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
@@ -756,6 +900,66 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Fiberon PPS-GF20 @Snapmaker U1 base",
 			"sub_path": "filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json"
@@ -1448,6 +1652,10 @@
 			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
@@ -1760,6 +1968,30 @@
 			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA-CF",
 			"sub_path": "filament/Snapmaker PLA-CF.json"
@@ -1840,6 +2072,30 @@
 			"name": "Snapmaker J1 TPU High-Flow",
 			"sub_path": "filament/Snapmaker J1 TPU High-Flow.json"
 		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker TPE @U1",
 			"sub_path": "filament/Snapmaker TPE @U1.json"
@@ -1860,6 +2116,174 @@
 			"name": "Snapmaker TPU",
 			"sub_path": "filament/Snapmaker TPU.json"
 		},
+		{
+			"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PET @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "PolyLite Dual PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json"
@@ -1868,6 +2292,114 @@
 			"name": "PolyLite J1 PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json"
 		},
+		{
+			"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker Dual PLA Eco",
 			"sub_path": "filament/Snapmaker Dual PLA Eco.json"
@@ -1904,6 +2436,50 @@
 			"name": "Snapmaker Breakaway Support @base",
 			"sub_path": "filament/Snapmaker Breakaway Support @base.json"
 		},
+		{
+			"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker Breakaway Support For PLA @U1",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json"
@@ -1920,6 +2496,138 @@
 			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
 		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "PolyTerra J1 PLA",
 			"sub_path": "filament/Polymaker/PolyTerra J1 PLA.json"
@@ -2238,6 +2946,22 @@
 			"name": "Snapmaker Artisan (0.8 nozzle)",
 			"sub_path": "machine/Snapmaker Artisan (0.8 nozzle).json"
 		},
+		{
+			"name": "Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
 		{
 			"name": "Snapmaker A250 Dual BKit (0.2 nozzle)",
 			"sub_path": "machine/Snapmaker A250 Dual BKit (0.2 nozzle).json"
diff --git a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..794206a9ee
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon ASA-CF08 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "b1SjanapSsHClohQ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..40f28ecc21
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA12-CF10 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "NSFnZepHnBOgrNpc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..dd15942c75
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA6-CF20 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "qBf8pKCPs51wZX8h",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..a051be58f7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA612-ESD @Snapmaker U1",
+	"from": "system",
+	"setting_id": "IE8AoNlftuKceK82",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fe4411ceba
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PETG-ESD @Snapmaker U1",
+	"from": "system",
+	"setting_id": "tBqwA6bzMZxINvhc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..a838e2fecc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PPS-GF20 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "262BRaOSZLUidxzi",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..f224a6e5f8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "CyVMh4hZ5TrBb9Hl",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..2dbdd3a6d3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "AB6Lv3KHVfZ3F17I",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..67955d8cdc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "2wjxry91mFaUY5Kv",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..766f30a03f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "M5HDLQjQbdOYUkJc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..be8af80e2d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "hmfOc244iLZRjSxC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c13f72b1ed
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "QaYzwWA21nLkbeTd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..d0fed24d19
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "4FW7HsZg0GOFDyCr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..b0b75d0a17
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "DcwXjRYE21g1s7Gd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9ce1f45d0e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "xiruPdezF8sdAwJC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..6ecdd1894b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "edRC83pnDlkg8SYB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..95c852bdf8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "mwzFh7n5O4sSVbdq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..fa8f00af48
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "jOJzxhflMDXUSXP1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e564663de8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "u6ZVj3bEGhEScBAn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..e964a2d73c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "3rI0eWUn62OqztwD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..0576e76d5f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "Ca1ysi9BTj3SmRnf",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..2ab997f82f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "H45bzmFIJs2jcRxK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4a30c36707
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "rNAH84Cth3UXfID4",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..c26c6d1d75
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "1fXum9hyhX2CXp84",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..8350a79674
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "DEHdvXmDRZ4klSfG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..66e30d591e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "rgP9xBiJi6jtTGe6",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..960fbb7ae4
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "wKeFBUbXAh371HJc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..4749f73903
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "PoZUUozGNqKXDY6j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..ae13436c89
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "lSxapFINSYnT0jU5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4ea4fa5854
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "LumAEUgsSqWvQcnD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..6489d4c06e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "cbQkQEdl7ZZySWyb",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..d8a21dc0ff
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "w2R1GQrrewIaFigA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..af86177bce
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.4 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "a1T45jY9dw7cvXT9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..3bb797471f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.6 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "bHQSXsU5JQW91pkB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..88d4a980f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.8 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "FnByDNEkW6W6FR63",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e9de9fd91a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma CoPE @Snapmaker U1",
+	"from": "system",
+	"setting_id": "nBvDgnN3J4k3Uytq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b57e11d9ae
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "U5ss8ZIjm3fIz1Nq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..23888f197d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Celestial @Snapmaker U1",
+	"from": "system",
+	"setting_id": "R81OCOp3l7L8B8fJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7f77834c25
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "fS50UtV6RhVtB4uP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6becd42d5e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Glow @Snapmaker U1",
+	"from": "system",
+	"setting_id": "JCgz8jS9LuwdaBl1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e7c1666d92
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Luminous @Snapmaker U1",
+	"from": "system",
+	"setting_id": "K5a28HOfNIVohTxH",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7ed7b808a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Marble @Snapmaker U1",
+	"from": "system",
+	"setting_id": "iXtNnANcE9HjT8nn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..42fb688f20
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Matte @Snapmaker U1",
+	"from": "system",
+	"setting_id": "c9CmXJsBkThq39c6",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fb1c10a2bc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "KQ2nKfjxSAroQBJq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fa9087b701
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Neon @Snapmaker U1",
+	"from": "system",
+	"setting_id": "9fYw7eMrJBaA00at",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..970adef497
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Satin @Snapmaker U1",
+	"from": "system",
+	"setting_id": "PRlG1wqgh0KI7fuT",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..47f12bcfd8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Silk @Snapmaker U1",
+	"from": "system",
+	"setting_id": "EXLntLMjWCfwg2Wc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d0a4cdee65
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Starlight @Snapmaker U1",
+	"from": "system",
+	"setting_id": "4QxRxMj60hcFxdJL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fca32afa7b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Temp Shift @Snapmaker U1",
+	"from": "system",
+	"setting_id": "HDp1DlQLCfSKhaNx",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f6a4f0bfc3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "4ZTw1XHqwI7QjEfR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..295bee1ea0
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA UV Shift @Snapmaker U1",
+	"from": "system",
+	"setting_id": "0pFMgeH7aowERZoU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6ed9b9543d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite CosPLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "iZqJvDu4xfgIBrpm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..0616e2fba3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PETG @Snapmaker U1",
+	"from": "system",
+	"setting_id": "fCNkJQO5skF4ZJcJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b7dee44938
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PETG Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "polhiSJb82UYZObE",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b337a5abc3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "AUKAVbKch9zjmuKG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d2669f41a3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "hncpZTWfBmfoUaCq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..748fe5e2c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Glow @Snapmaker U1",
+	"from": "system",
+	"setting_id": "DUuZDzjm3bmNBKSA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7c7c661948
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Luminous @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Mv5E1GpGrdHVF2Vs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..8aee23d539
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Neon @Snapmaker U1",
+	"from": "system",
+	"setting_id": "3HWUcpQIJsnxWDp7",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..0320f700c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Pro @Snapmaker U1",
+	"from": "system",
+	"setting_id": "mOax5GeAHVzqs4zL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f3a964bebb
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Pro Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Vm5ydb09RSgfd1a8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..efcfd1518e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Starlight @Snapmaker U1",
+	"from": "system",
+	"setting_id": "urJVmseOC2Px1qIW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..06e0a310c7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "jCgyYlatUD3jfQXS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e2c1f0aa26
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "MTZ6N0HHdSwkoysG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e9bf977e66
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA Marble @Snapmaker U1",
+	"from": "system",
+	"setting_id": "uQFqbcqaSTrlM52u",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..274caf962e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA+ @Snapmaker U1",
+	"from": "system",
+	"setting_id": "ckmc2jbEBO6kAfXn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c36940b325
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker General PLA Family @U1",
+	"from": "system",
+	"setting_id": "lTLCaycZyEv7ATPu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..1bd1c95108
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker HT-PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "YB5Tzz4hghtQ6Iha",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..844fc2e463
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker HT-PLA-GF @Snapmaker U1",
+	"from": "system",
+	"setting_id": "XTfLaJ4pTpmfYOHK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d15778711a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PETG @Snapmaker U1",
+	"from": "system",
+	"setting_id": "7RmkAZ1MMkUK4UFe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..99eae4584a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PETG Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "cBNSP4FfKq94BuWn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..066c4e5d48
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "N99CwtkZbVeE9ZoP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d1c63bc805
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA Pro @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Npw7PdfMi3qIDuIY",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c7e944ea35
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA Pro Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "YBy6gtPvOWIYchuS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c60d41257c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker Silk PLA Family @U1",
+	"from": "system",
+	"setting_id": "diMNPKgSPiNmv0EG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4a539098ca
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker Tough PLA Family @U1",
+	"from": "system",
+	"setting_id": "tFHtV4suxKdRifWW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e3b53f36f3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,50 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ABS @U1",
+	"from": "system",
+	"setting_id": "23BA0fe1OoCgoHAe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..244351878e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ABS Benchy @U1",
+	"from": "system",
+	"setting_id": "TI7PLhJrI5VSiYtg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"93"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 31 x 3 = 93 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"compatible_prints": [
+		"0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c5199df011
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,50 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ASA @U1",
+	"from": "system",
+	"setting_id": "UlxZs1Ey16Ic8TO8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..3fff84663e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "Bzmt5I0LmEGEyWq3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"1.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 0.5 x 3 = 1.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..871d785016
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1",
+	"from": "system",
+	"setting_id": "2Wa2yfYIeZ0NfnD0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..77717f535a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "YRUG55NCp7gQtahJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..5db74011a3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "vtGhXaMJKZrd1kgP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f6981095b8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PA-CF @U1",
+	"from": "system",
+	"setting_id": "SRbkfUJ8K9LunPYq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..854a02c1d1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PET @U1",
+	"from": "system",
+	"setting_id": "q0JpO9zk404c3d3B",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"20.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.8 x 3 = 20.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..780f8fee71
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG @U1",
+	"from": "system",
+	"setting_id": "T604QL6Utgbj4kLh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..91b263df44
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "ILQ3IFpogGbjluIN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..085debf589
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,68 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "dYZPyzUTqIxCaWMZ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"50"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_multitool_ramming_volume": [
+		"8"
+	],
+	"filament_retract_length_toolchange": [
+		"8"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ca27f67555
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "A4AAbNDIaCgXqiIk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..051bb8fbac
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "vDLX4xfsJUq4aWd8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..44f49f7b2d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "jWQZ4FpmKof6eKP5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.2875"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..265b504a53
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "SSb1PYKLfJmn0RaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..aea3ffda1c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "8teECJZmuiAx3xzK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..7e66c59a2c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "jFuSDlP3daCftYGd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4fb22fd2a5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,65 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG-CF @U1",
+	"from": "system",
+	"setting_id": "kTtK6gmRn2LVCgPv",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"20"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_flow_ratio": [
+		"1.01"
+	],
+	"filament_max_volumetric_speed": [
+		"19.2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"30"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"13"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.5"
+	],
+	"filament_retract_length_toolchange": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"pressure_advance": [
+		"0.028"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.4 x 3 = 19.2 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9e52e8d145
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA @U1",
+	"from": "system",
+	"setting_id": "Iw2vC9RsmNnXlyFC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"42"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 14 x 3 = 42 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..5b690deccc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Basic @U1",
+	"from": "system",
+	"setting_id": "6pP9yn7QPVxPrKlp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..1fc7f3e6e5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Eco @U1",
+	"from": "system",
+	"setting_id": "yBXvtWTUvseiCC6p",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d9b39fcdb2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "Si1HKTz9ZSM8dIaU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d6423ff5ff
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Glow @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "z33Hc87sYPmwPL5J",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"pressure_advance": [
+		"0.023"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6f7f024b4c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Lite @U1",
+	"from": "system",
+	"setting_id": "siahKp21MtWd5vha",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..a0e558096c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "uJJlKJE6cP1VqAhi",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_flow_ratio": [
+		"1.0395"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b4021aea6a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,44 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1",
+	"from": "system",
+	"setting_id": "a0eQeSmYLKJpPxo9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_max_volumetric_speed": [
+		"66"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 22 x 3 = 66 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..daef1b37d5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "DfrCVTFg0FD7XVkf",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.9801"
+	],
+	"pressure_advance": [
+		"0.018"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..7f36cee705
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "jMrzguz4b18qMWem",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.9702"
+	],
+	"pressure_advance": [
+		"0.018"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c5c4b829a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Metal @U1",
+	"from": "system",
+	"setting_id": "01UP0AVB1B7TBi78",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..d110009d58
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "3YXcTZZ99lTaxy3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e05d313038
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1",
+	"from": "system",
+	"setting_id": "rpTq4sJFpmbdl0dy",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ad19b1abf3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "SYJSv3f1LWPnWTo1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..3856c5e5a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "GpTeZsC8ST8UvkKe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..ef43a62cc1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "75HoJsG7nurT9m8o",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"pressure_advance": [
+		"0.24"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9ab350a7ba
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1",
+	"from": "system",
+	"setting_id": "2S7b7VwKFkZuXTHB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ab657264ad
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "e3hivxxVP4MEauB0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..5e9be868b6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "0ZOycCmSyLf9Zr3f",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"pressure_advance": [
+		"0.0216"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..b7b8357798
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "atEZp48A9Ajefn5P",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.18"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1.6 x 3 = 4.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..67a5c77f4a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "OhPRQfEeCCBos1Xk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..29767b5045
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "UkjutA0LDsne1Kr4",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..6790f2a521
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "IEcagoFA1np00DZq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..95ef69bb13
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "7IGP2hVMK7ajiLuk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_retract_length_toolchange": [
+		"6"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..71e3f69b98
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "8tH46AUyW4uua5QB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.0134"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9bcde49fd5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "LW5RkXBTM4eE3eRK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.0067"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c61a287426
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,38 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "ork4mVEyJBzXs2Xj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_retract_length_toolchange": [
+		"15"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..825567e128
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "c982QxKnlzVRADnm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..52100f6bbe
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "4qXeMrTt9pZNCwEr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e96baac97a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1",
+	"from": "system",
+	"setting_id": "NZwDYFscSMlZJusK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 5 x 3 = 15 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..1fb7bc978a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "AO1DsQ9uGg1ivN8b",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.9506"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..cfdd941bc8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "xy6MMfFlgvgrP0Xj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.9312"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4b03c0e63d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPE @U1",
+	"from": "system",
+	"setting_id": "wLR0Jg5KEPd18zik",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"21.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.2 x 3 = 21.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..130bba2045
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1",
+	"from": "system",
+	"setting_id": "xAMUl2DDEuMrrzAs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..d999f651f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "URpA1Br6ZxbbV0IF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..b49d1d3a09
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "nECpLUQc8O9JE4em",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"10.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.5 x 3 = 10.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..55ba8da2db
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A @U1",
+	"from": "system",
+	"setting_id": "Ywz3Y08u16nlPSuD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..461dcf6e69
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1",
+	"from": "system",
+	"setting_id": "hVOeZYtFdD5f9n8N",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"27"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 9 x 3 = 27 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..416cfe0097
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "gkRhqrvJIZh1o3wJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9971dabbf2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "ILlLnES7BQLAKxnH",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..48d709b12d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "fzFdqg3bAFNCOB7S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..8af4584d0a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "qABR1pUxRSY6jSAk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..6009f90585
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "fgWdX41gAzkDoAW5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d34d28c7b5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "UFqQnkKICuivJWiW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..34cf3796f5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "E5Y9PFB8elCm2yGh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9453bf939b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "FXqeu1WlfeqwdbrM",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..9afb250476
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "rypfKOLmPmXpR3Z9",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.2 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle"
+	],
+	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..f8b8d44e10
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "YVXcn9a2pyGfl8wo",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.4 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle"
+	],
+	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..53c0d682cd
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "7Nqiw8MQIWaQqB1R",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.6 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle"
+	],
+	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..ded207ffbf
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "aTs5dXyBbXItUEeS",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.8 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle"
+	],
+	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
index 96eb53f81a..0b5f8c8a93 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -8,5 +8,5 @@
 	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
 	"bed_model": "Snapmaker U1_bed.stl",
 	"bed_texture": "Snapmaker U1_texture.svg",
-	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8"
+	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow"
 }
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..3deab05cdd
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "LFjXyYMCx6Oy12PQ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..f48dfa5c3b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "nMJ1UXr4uyWr62Nx",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..8fd4c1cbe7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "iyzOhKe7WcJvxmQu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..b9e42b5d79
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "CaOHxJpx23e32eZm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..a7141e48f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "3Jsj1rKIzF9dhszS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..c81c177341
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "Dk5x3oI8wrO1SYDF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..ab2f3430c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "AEdUWWIQuuIvPX48",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..9dbcbb12da
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "k5ltb2fjXfHavuJl",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..77bb9d98a9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "68ArVT2y9MR8cLZ1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..e052a9e517
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "m9GIExQJEdmIA0t2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..dc46dd6014
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "VYRDtZXoZWqcHBJP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..08451b8fa7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "NPQCD2bScfCwZAGP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..cbf3b13b75
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "Wkl0CFo4qXv79E1W",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..9ed96478f2
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "xGaLQMk52ZD5ZqJh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..9410d42ef5
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "aW5X8f9lb5haKlWj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..1a680858b1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "g8JVHkdQOCWRZZf5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..de45cf42f9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "5EHp34T55kiTtt68",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..dbaa4cac78
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "l3KpKbqxUGKTjO0t",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..cc1c08848c
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "jTYxPrkfNAXXeElO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..d305323789
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "o2uNeeRv8JNXAuD0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..6bbd70ca8b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "rLdRXBKLSDdjsSs9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..ea99859bc7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "cZfx1x9K6oYUG6nK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..1072a08efa
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "PvF43C7HiDhd7BKg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..7844a38bf1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "FAVs0dNRa86OWdzy",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..bc50c410c5
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "21Yht5aHJVG0XebG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..bd58038ed9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "ofB4cQcZJ2Lkze83",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..00494a3516
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "K3aD6VMSmWStekaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..46de759eb1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "G8jjRPwut6AkuW7w",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..40e31b320f
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "4S1DO4sXQX2RXSjC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..c74cf8b309
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "6k3IeQoysYKUxTxG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..aab911513d
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "4c5vbxTAK6TVyTpg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..3d3a341e2b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "vWhACedmOjulskG0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..1981348438
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "YEOmDIj6IFBHwvTr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..cca40610a9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "kXJPwKEtZ6kSTvcm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..b976586099
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "BTuUnaHxKcjQlOv9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..091c301acf
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "VrtVj7ZWFPegxXaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}