diff --git a/docs/HLSD/snapmaker-high-flow.md b/docs/HLSD/snapmaker-high-flow.md new file mode 100644 index 0000000000..63806cbd83 --- /dev/null +++ b/docs/HLSD/snapmaker-high-flow.md @@ -0,0 +1,92 @@ +# Snapmaker U1 high-flow profiles + +The U1 provides separate High Flow printer presets for 0.2, 0.4, 0.6 and +0.8 mm nozzles. Each describes four tools fitted with the same diameter and +high-flow nozzle. They inherit the corresponding standard printer, retaining +its model identity, geometry, motion limits and machine G-code. Existing +standard and mixed-diameter presets retain their settings and names. + +Enable the High Flow variants under Snapmaker U1 in the printer setup, select +the matching printer, and select a filament whose name includes that diameter +and `High Flow nozzle`. PLA SnapSpeed is the default material for these +printers. Dedicated HF process presets preserve diameter-specific extrusion +widths and layer heights while overriding the four print speeds below. +Separate HF filament presets keep higher ceilings out of standard-nozzle +material settings. + +## Process speeds + +All 36 HF process presets, across 0.2, 0.4, 0.6 and 0.8 mm nozzles, +use the same requested speeds from Snorca's 0.4 mm HF Standard process: + +| Setting | Speed (mm/s) | +| --- | ---: | +| Inner walls | 600 | +| Outer walls | 500 | +| Internal solid infill | 600 | +| Sparse infill | 600 | + +Each HF process inherits its standard diameter/layer-height counterpart, +so geometry, accelerations, first-layer speeds, bridges, overhangs and other +settings remain diameter-specific. Standard printers retain their original +process speeds. HF printers default to the corresponding HF process. +Volumetric ceilings and machine motion limits still cap actual speeds. + +## Calibration sources + +Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main` +commit `b1831e5dcb`, under `resources/profiles/Snapmaker/filament/`. That fork +uses `filament_flow_support: ["standard", "high_flow"]` to interpret paired +values. Here the high-flow column is translated into ordinary single-valued +filament overrides; the fork-specific keys and its profile restructuring are +not imported. Companion temperature and pressure-advance enable settings are +included. Machine and filament G-code remain inherited from this branch. + +The 14 materials with upstream HF overrides are ABS, ASA, PETG HF, PETG Translucent, PETG-CF, +PLA Full Spectrum, PLA Glow, PLA Matte, PLA Silk, PLA SnapSpeed, PLA +Translucent, PLA Wood, PLA-CF and PVA. Upstream's renamed Support For PLA is +not assumed equivalent to the local Breakaway formulation. + +## Volumetric ceiling + +All 141 HF filament presets explicitly set maximum volumetric speed to three +times the fully inherited non-HF material value. Diameter-specific parents +are used where available; Generic HF presets inherit the active Orca filament +library's `@System` definitions, which are shared across diameters. The parent +is recorded in `inherits`. This replaces both the upstream 0.4 mm HF ceiling +and the earlier capped estimates. + +The ceiling is a user-selected limit, not a measured hardware capability. +Other process and machine limits still apply. Future changes to a parent +preset's volumetric speed require updating its HF child; the multiplier is +materialized in JSON, not evaluated by the slicer. + +## Other material settings + +The 24 additional HF material presets are **estimated starting points**, not +manufacturer calibrations. They exist only where this branch already has a +matching material and diameter. In particular, this does not make filled +materials available to a 0.2 mm nozzle when no such standard profile exists. + +For each material with a paired 0.4 mm standard/HF value: + +- Flow ratio and pressure advance use the 0.4 mm HF/standard ratio, + rounded to four decimal places. A zero standard value is not divided by. +- Nozzle and initial-layer temperatures use the 0.4 mm HF-minus-standard + difference, added to the diameter's original temperature. +- Pressure advance follows the source's enable setting when its value is + adjusted. Diameter-specific retraction and cooling settings are retained. +- Missing, single-valued or `nil` comparisons leave the diameter's original + setting intact. + +For example, PLA SnapSpeed has standard volumetric limits of 2 mm^3/s at +0.2 mm and 20 mm^3/s at 0.4, 0.6 and 0.8 mm. Its HF ceilings are therefore +6 and 60 mm^3/s respectively. The other 103 HF material presets retain their +standard parent's temperature, retraction, cooling and pressure-advance +settings, changing only the volumetric ceiling and profile metadata. +Each HF preset includes its baseline and ceiling in its filament notes. +Tune the material settings for the actual nozzle, filament and temperature. + +The separate preset design requires no C++ changes or new profile keys. It +does not provide independent standard/HF selection per tool within one printer +preset; a mixed hardware setup needs its own calibrated user preset. diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index 06acef0b0e..d415c7dadd 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.15", + "version": "02.04.00.16", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ @@ -194,6 +194,10 @@ "name": "fdm_process_idex", "sub_path": "process/fdm_process_idex.json" }, + { + "name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json" + }, { "name": "fdm_process_U1_0.06_nozzle_0.2", "sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json" @@ -614,6 +618,146 @@ "name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)", "sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json" }, + { + "name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json" + }, + { + "name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json" + }, + { + "name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json" + }, + { + "name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json" + }, + { + "name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json" + }, + { + "name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json" + }, { "name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)", "sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json" @@ -756,6 +900,66 @@ "name": "fdm_filament_tpu", "sub_path": "filament/fdm_filament_tpu.json" }, + { + "name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json" + }, { "name": "Fiberon PPS-GF20 @Snapmaker U1 base", "sub_path": "filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json" @@ -1448,6 +1652,10 @@ "name": "Snapmaker PETG HF @U1 0.2 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json" }, + { + "name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json" + }, { "name": "Snapmaker PETG HF @U1 0.6 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json" @@ -1760,6 +1968,30 @@ "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", "sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json" }, + { + "name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json" + }, { "name": "Snapmaker PLA-CF", "sub_path": "filament/Snapmaker PLA-CF.json" @@ -1840,6 +2072,30 @@ "name": "Snapmaker J1 TPU High-Flow", "sub_path": "filament/Snapmaker J1 TPU High-Flow.json" }, + { + "name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json" + }, { "name": "Snapmaker TPE @U1", "sub_path": "filament/Snapmaker TPE @U1.json" @@ -1860,6 +2116,174 @@ "name": "Snapmaker TPU", "sub_path": "filament/Snapmaker TPU.json" }, + { + "name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker ABS @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker ASA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PET @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PET @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle", + "sub_path": "filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PETG @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PETG @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker PETG @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker PETG @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma CoPE @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle", + "sub_path": "filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite CosPLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA @U1 0.4 High Flow nozzle.json" + }, { "name": "PolyLite Dual PLA @0.2 nozzle", "sub_path": "filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json" @@ -1868,6 +2292,114 @@ "name": "PolyLite J1 PLA @0.2 nozzle", "sub_path": "filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json" }, + { + "name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyTerra PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json" + }, + { + "name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle", + "sub_path": "filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle", + "sub_path": "filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json" + }, { "name": "Snapmaker Dual PLA Eco", "sub_path": "filament/Snapmaker Dual PLA Eco.json" @@ -1904,6 +2436,50 @@ "name": "Snapmaker Breakaway Support @base", "sub_path": "filament/Snapmaker Breakaway Support @base.json" }, + { + "name": "Snapmaker PVA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPE @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json" + }, { "name": "Snapmaker Breakaway Support For PLA @U1", "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json" @@ -1920,6 +2496,138 @@ "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json" }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PETG @U1 0.2 High Flow nozzle", + "sub_path": "filament/Generic PETG @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Generic PETG @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PETG @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PETG @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PETG @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PETG @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PETG @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.2 High Flow nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PETG HF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PETG HF @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PETG-CF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PLA @U1 0.2 High Flow nozzle", + "sub_path": "filament/Generic PLA @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Generic PLA @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PLA @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PLA @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PLA @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PLA @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PLA @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.2 High Flow nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PLA High Speed @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.2 High Flow nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PLA Silk @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic PLA-CF @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json" + }, + { + "name": "Generic TPU @U1 0.4 High Flow nozzle", + "sub_path": "filament/Generic TPU @U1 0.4 High Flow nozzle.json" + }, + { + "name": "Generic TPU @U1 0.6 High Flow nozzle", + "sub_path": "filament/Generic TPU @U1 0.6 High Flow nozzle.json" + }, + { + "name": "Generic TPU @U1 0.8 High Flow nozzle", + "sub_path": "filament/Generic TPU @U1 0.8 High Flow nozzle.json" + }, { "name": "PolyTerra J1 PLA", "sub_path": "filament/Polymaker/PolyTerra J1 PLA.json" @@ -2238,6 +2946,22 @@ "name": "Snapmaker Artisan (0.8 nozzle)", "sub_path": "machine/Snapmaker Artisan (0.8 nozzle).json" }, + { + "name": "Snapmaker U1 (0.2 High Flow nozzle)", + "sub_path": "machine/Snapmaker U1 (0.2 High Flow nozzle).json" + }, + { + "name": "Snapmaker U1 (0.4 High Flow nozzle)", + "sub_path": "machine/Snapmaker U1 (0.4 High Flow nozzle).json" + }, + { + "name": "Snapmaker U1 (0.6 High Flow nozzle)", + "sub_path": "machine/Snapmaker U1 (0.6 High Flow nozzle).json" + }, + { + "name": "Snapmaker U1 (0.8 High Flow nozzle)", + "sub_path": "machine/Snapmaker U1 (0.8 High Flow nozzle).json" + }, { "name": "Snapmaker A250 Dual BKit (0.2 nozzle)", "sub_path": "machine/Snapmaker A250 Dual BKit (0.2 nozzle).json" diff --git a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..794206a9ee --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle", + "inherits": "Fiberon ASA-CF08 @Snapmaker U1", + "from": "system", + "setting_id": "b1SjanapSsHClohQ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..40f28ecc21 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle", + "inherits": "Fiberon PA12-CF10 @Snapmaker U1", + "from": "system", + "setting_id": "NSFnZepHnBOgrNpc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..dd15942c75 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle", + "inherits": "Fiberon PA6-CF20 @Snapmaker U1", + "from": "system", + "setting_id": "qBf8pKCPs51wZX8h", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..a051be58f7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle", + "inherits": "Fiberon PA612-ESD @Snapmaker U1", + "from": "system", + "setting_id": "IE8AoNlftuKceK82", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..fe4411ceba --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle", + "inherits": "Fiberon PETG-ESD @Snapmaker U1", + "from": "system", + "setting_id": "tBqwA6bzMZxINvhc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..a838e2fecc --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle", + "inherits": "Fiberon PPS-GF20 @Snapmaker U1", + "from": "system", + "setting_id": "262BRaOSZLUidxzi", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..f224a6e5f8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.2 High Flow nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "CyVMh4hZ5TrBb9Hl", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..2dbdd3a6d3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.4 High Flow nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "AB6Lv3KHVfZ3F17I", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..67955d8cdc --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.6 High Flow nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "2wjxry91mFaUY5Kv", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..766f30a03f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG @U1 0.8 High Flow nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "M5HDLQjQbdOYUkJc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..be8af80e2d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.2 High Flow nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "hmfOc244iLZRjSxC", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c13f72b1ed --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.4 High Flow nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "QaYzwWA21nLkbeTd", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..d0fed24d19 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.6 High Flow nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "4FW7HsZg0GOFDyCr", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..b0b75d0a17 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG HF @U1 0.8 High Flow nozzle", + "inherits": "Generic PETG HF @System", + "from": "system", + "setting_id": "DcwXjRYE21g1s7Gd", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..9ce1f45d0e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.4 High Flow nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "xiruPdezF8sdAwJC", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "34.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..6ecdd1894b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.6 High Flow nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "edRC83pnDlkg8SYB", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "34.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..95c852bdf8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @U1 0.8 High Flow nozzle", + "inherits": "Generic PETG-CF @System", + "from": "system", + "setting_id": "mwzFh7n5O4sSVbdq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "34.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..fa8f00af48 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.2 High Flow nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "jOJzxhflMDXUSXP1", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e564663de8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.4 High Flow nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "u6ZVj3bEGhEScBAn", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..e964a2d73c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.6 High Flow nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "3rI0eWUn62OqztwD", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..0576e76d5f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA @U1 0.8 High Flow nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "Ca1ysi9BTj3SmRnf", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..2ab997f82f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.2 High Flow nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "H45bzmFIJs2jcRxK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..4a30c36707 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.4 High Flow nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "rNAH84Cth3UXfID4", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..c26c6d1d75 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.6 High Flow nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "1fXum9hyhX2CXp84", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..8350a79674 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @U1 0.8 High Flow nozzle", + "inherits": "Generic PLA High Speed @System", + "from": "system", + "setting_id": "DEHdvXmDRZ4klSfG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..66e30d591e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.2 High Flow nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "rgP9xBiJi6jtTGe6", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..960fbb7ae4 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.4 High Flow nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "wKeFBUbXAh371HJc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..4749f73903 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.6 High Flow nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "PoZUUozGNqKXDY6j", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..ae13436c89 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @U1 0.8 High Flow nozzle", + "inherits": "Generic PLA Silk @System", + "from": "system", + "setting_id": "lSxapFINSYnT0jU5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..4ea4fa5854 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.4 High Flow nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "LumAEUgsSqWvQcnD", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..6489d4c06e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.6 High Flow nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "cbQkQEdl7ZZySWyb", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..d8a21dc0ff --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @U1 0.8 High Flow nozzle", + "inherits": "Generic PLA-CF @System", + "from": "system", + "setting_id": "w2R1GQrrewIaFigA", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..af86177bce --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.4 High Flow nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "a1T45jY9dw7cvXT9", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..3bb797471f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.6 High Flow nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "bHQSXsU5JQW91pkB", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..88d4a980f1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Generic TPU @U1 0.8 High Flow nozzle", + "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "FnByDNEkW6W6FR63", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e9de9fd91a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma CoPE @U1 0.4 High Flow nozzle", + "inherits": "Panchroma CoPE @Snapmaker U1", + "from": "system", + "setting_id": "nBvDgnN3J4k3Uytq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..b57e11d9ae --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA @Snapmaker U1", + "from": "system", + "setting_id": "U5ss8ZIjm3fIz1Nq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..23888f197d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Celestial @Snapmaker U1", + "from": "system", + "setting_id": "R81OCOp3l7L8B8fJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..7f77834c25 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Galaxy @Snapmaker U1", + "from": "system", + "setting_id": "fS50UtV6RhVtB4uP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..6becd42d5e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Glow @Snapmaker U1", + "from": "system", + "setting_id": "JCgz8jS9LuwdaBl1", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e7c1666d92 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Luminous @Snapmaker U1", + "from": "system", + "setting_id": "K5a28HOfNIVohTxH", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..7ed7b808a2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Marble @Snapmaker U1", + "from": "system", + "setting_id": "iXtNnANcE9HjT8nn", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..42fb688f20 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Matte @Snapmaker U1", + "from": "system", + "setting_id": "c9CmXJsBkThq39c6", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..fb1c10a2bc --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Metallic @Snapmaker U1", + "from": "system", + "setting_id": "KQ2nKfjxSAroQBJq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..fa9087b701 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Neon @Snapmaker U1", + "from": "system", + "setting_id": "9fYw7eMrJBaA00at", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..970adef497 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Satin @Snapmaker U1", + "from": "system", + "setting_id": "PRlG1wqgh0KI7fuT", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..47f12bcfd8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Silk @Snapmaker U1", + "from": "system", + "setting_id": "EXLntLMjWCfwg2Wc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d0a4cdee65 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Starlight @Snapmaker U1", + "from": "system", + "setting_id": "4QxRxMj60hcFxdJL", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..fca32afa7b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Temp Shift @Snapmaker U1", + "from": "system", + "setting_id": "HDp1DlQLCfSKhaNx", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..f6a4f0bfc3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA Translucent @Snapmaker U1", + "from": "system", + "setting_id": "4ZTw1XHqwI7QjEfR", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..295bee1ea0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle", + "inherits": "Panchroma PLA UV Shift @Snapmaker U1", + "from": "system", + "setting_id": "0pFMgeH7aowERZoU", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..6ed9b9543d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite CosPLA @U1 0.4 High Flow nozzle", + "inherits": "PolyLite CosPLA @Snapmaker U1", + "from": "system", + "setting_id": "iZqJvDu4xfgIBrpm", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..0616e2fba3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PETG @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PETG @Snapmaker U1", + "from": "system", + "setting_id": "fCNkJQO5skF4ZJcJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..b7dee44938 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PETG Translucent @Snapmaker U1", + "from": "system", + "setting_id": "polhiSJb82UYZObE", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.5" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..b337a5abc3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA @Snapmaker U1", + "from": "system", + "setting_id": "AUKAVbKch9zjmuKG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d2669f41a3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Galaxy @Snapmaker U1", + "from": "system", + "setting_id": "hncpZTWfBmfoUaCq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..748fe5e2c6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Glow @Snapmaker U1", + "from": "system", + "setting_id": "DUuZDzjm3bmNBKSA", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..7c7c661948 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Luminous @Snapmaker U1", + "from": "system", + "setting_id": "Mv5E1GpGrdHVF2Vs", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..8aee23d539 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Neon @Snapmaker U1", + "from": "system", + "setting_id": "3HWUcpQIJsnxWDp7", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..0320f700c6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Pro @Snapmaker U1", + "from": "system", + "setting_id": "mOax5GeAHVzqs4zL", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..f3a964bebb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Pro Metallic @Snapmaker U1", + "from": "system", + "setting_id": "Vm5ydb09RSgfd1a8", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..efcfd1518e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Starlight @Snapmaker U1", + "from": "system", + "setting_id": "urJVmseOC2Px1qIW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..06e0a310c7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle", + "inherits": "PolyLite PLA Translucent @Snapmaker U1", + "from": "system", + "setting_id": "jCgyYlatUD3jfQXS", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e2c1f0aa26 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @U1 0.4 High Flow nozzle", + "inherits": "PolyTerra PLA @Snapmaker U1", + "from": "system", + "setting_id": "MTZ6N0HHdSwkoysG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e9bf977e66 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle", + "inherits": "PolyTerra PLA Marble @Snapmaker U1", + "from": "system", + "setting_id": "uQFqbcqaSTrlM52u", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..274caf962e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle", + "inherits": "PolyTerra PLA+ @Snapmaker U1", + "from": "system", + "setting_id": "ckmc2jbEBO6kAfXn", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c36940b325 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle", + "inherits": "Polymaker General PLA Family @U1", + "from": "system", + "setting_id": "lTLCaycZyEv7ATPu", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..1bd1c95108 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle", + "inherits": "Polymaker HT-PLA @Snapmaker U1", + "from": "system", + "setting_id": "YB5Tzz4hghtQ6Iha", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..844fc2e463 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle", + "inherits": "Polymaker HT-PLA-GF @Snapmaker U1", + "from": "system", + "setting_id": "XTfLaJ4pTpmfYOHK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d15778711a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker PETG @U1 0.4 High Flow nozzle", + "inherits": "Polymaker PETG @Snapmaker U1", + "from": "system", + "setting_id": "7RmkAZ1MMkUK4UFe", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..99eae4584a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle", + "inherits": "Polymaker PETG Galaxy @Snapmaker U1", + "from": "system", + "setting_id": "cBNSP4FfKq94BuWn", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..066c4e5d48 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker PLA @U1 0.4 High Flow nozzle", + "inherits": "Polymaker PLA @Snapmaker U1", + "from": "system", + "setting_id": "N99CwtkZbVeE9ZoP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d1c63bc805 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle", + "inherits": "Polymaker PLA Pro @Snapmaker U1", + "from": "system", + "setting_id": "Npw7PdfMi3qIDuIY", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c7e944ea35 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle", + "inherits": "Polymaker PLA Pro Metallic @Snapmaker U1", + "from": "system", + "setting_id": "YBy6gtPvOWIYchuS", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c60d41257c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle", + "inherits": "Polymaker Silk PLA Family @U1", + "from": "system", + "setting_id": "diMNPKgSPiNmv0EG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..4a539098ca --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle", + "inherits": "Polymaker Tough PLA Family @U1", + "from": "system", + "setting_id": "tFHtV4suxKdRifWW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e3b53f36f3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Snapmaker ABS @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker ABS @U1", + "from": "system", + "setting_id": "23BA0fe1OoCgoHAe", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..244351878e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker ABS Benchy @U1", + "from": "system", + "setting_id": "TI7PLhJrI5VSiYtg", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "93" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 31 x 3 = 93 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "compatible_prints": [ + "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c5199df011 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Snapmaker ASA @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker ASA @U1", + "from": "system", + "setting_id": "UlxZs1Ey16Ic8TO8", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "fan_max_speed": [ + "25" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "pressure_advance": [ + "0.02" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..3fff84663e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", + "from": "system", + "setting_id": "Bzmt5I0LmEGEyWq3", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "1.5" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 0.5 x 3 = 1.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..871d785016 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker Breakaway Support For PLA @U1", + "from": "system", + "setting_id": "2Wa2yfYIeZ0NfnD0", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..77717f535a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", + "from": "system", + "setting_id": "YRUG55NCp7gQtahJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..5db74011a3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", + "from": "system", + "setting_id": "vtGhXaMJKZrd1kgP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..f6981095b8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PA-CF @U1", + "from": "system", + "setting_id": "SRbkfUJ8K9LunPYq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..854a02c1d1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PET @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PET @U1", + "from": "system", + "setting_id": "q0JpO9zk404c3d3B", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "20.4" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.8 x 3 = 20.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..780f8fee71 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PETG @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PETG @U1", + "from": "system", + "setting_id": "T604QL6Utgbj4kLh", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..91b263df44 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PETG HF @U1 0.2 nozzle", + "from": "system", + "setting_id": "ILQ3IFpogGbjluIN", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_flow_ratio": [ + "0.955" + ], + "pressure_advance": [ + "0.0525" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..085debf589 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "dYZPyzUTqIxCaWMZ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.955" + ], + "filament_max_volumetric_speed": [ + "48" + ], + "filament_minimal_purge_on_wipe_tower": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_multitool_ramming_volume": [ + "8" + ], + "filament_retract_length_toolchange": [ + "8" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "pressure_advance": [ + "0.035" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..ca27f67555 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PETG HF @U1 0.6 nozzle", + "from": "system", + "setting_id": "A4AAbNDIaCgXqiIk", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.955" + ], + "pressure_advance": [ + "0.0525" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..051bb8fbac --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PETG HF @U1 0.8 nozzle", + "from": "system", + "setting_id": "vDLX4xfsJUq4aWd8", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.955" + ], + "pressure_advance": [ + "0.0525" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..44f49f7b2d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PETG Translucent @U1 0.2 nozzle", + "from": "system", + "setting_id": "jWQZ4FpmKof6eKP5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "pressure_advance": [ + "0.2875" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "3" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..265b504a53 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PETG Translucent @U1 0.4 nozzle", + "from": "system", + "setting_id": "SSb1PYKLfJmn0RaW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "pressure_advance": [ + "0.05" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "30" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..aea3ffda1c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PETG Translucent @U1 0.6 nozzle", + "from": "system", + "setting_id": "8teECJZmuiAx3xzK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "pressure_advance": [ + "0.025" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "48" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..7e66c59a2c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PETG Translucent @U1 0.8 nozzle", + "from": "system", + "setting_id": "jFuSDlP3daCftYGd", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "pressure_advance": [ + "0.025" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "48" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..4fb22fd2a5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PETG-CF @U1", + "from": "system", + "setting_id": "kTtK6gmRn2LVCgPv", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "20" + ], + "enable_pressure_advance": [ + "1" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_flow_ratio": [ + "1.01" + ], + "filament_max_volumetric_speed": [ + "19.2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "30" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "13" + ], + "filament_multitool_ramming_volume": [ + "0.5" + ], + "filament_retract_length_toolchange": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "pressure_advance": [ + "0.028" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.4 x 3 = 19.2 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..9e52e8d145 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA @U1", + "from": "system", + "setting_id": "Iw2vC9RsmNnXlyFC", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "42" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 14 x 3 = 42 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..5b690deccc --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Basic @U1", + "from": "system", + "setting_id": "6pP9yn7QPVxPrKlp", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..1fc7f3e6e5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Eco @U1", + "from": "system", + "setting_id": "yBXvtWTUvseiCC6p", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d9b39fcdb2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", + "from": "system", + "setting_id": "Si1HKTz9ZSM8dIaU", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "pressure_advance": [ + "0.024" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d6423ff5ff --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Glow @U1 0.4 nozzle", + "from": "system", + "setting_id": "z33Hc87sYPmwPL5J", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "48" + ], + "pressure_advance": [ + "0.023" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..6f7f024b4c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Lite @U1", + "from": "system", + "setting_id": "siahKp21MtWd5vha", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..a0e558096c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PLA Matte @U1 0.2 nozzle", + "from": "system", + "setting_id": "uJJlKJE6cP1VqAhi", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_flow_ratio": [ + "1.0395" + ], + "pressure_advance": [ + "0.03" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..b4021aea6a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Matte @U1", + "from": "system", + "setting_id": "a0eQeSmYLKJpPxo9", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "66" + ], + "filament_retraction_length": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "pressure_advance": [ + "0.024" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 22 x 3 = 66 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..daef1b37d5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA Matte @U1 0.6 nozzle", + "from": "system", + "setting_id": "DfrCVTFg0FD7XVkf", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.9801" + ], + "pressure_advance": [ + "0.018" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..7f36cee705 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA Matte @U1 0.8 nozzle", + "from": "system", + "setting_id": "jMrzguz4b18qMWem", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.9702" + ], + "pressure_advance": [ + "0.018" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c5c4b829a2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Metal @U1", + "from": "system", + "setting_id": "01UP0AVB1B7TBi78", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "48" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..d110009d58 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PLA Silk @U1 0.2 nozzle", + "from": "system", + "setting_id": "3YXcTZZ99lTaxy3j", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e05d313038 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Silk @U1", + "from": "system", + "setting_id": "rpTq4sJFpmbdl0dy", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..ad19b1abf3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA Silk @U1 0.6 nozzle", + "from": "system", + "setting_id": "SYJSv3f1LWPnWTo1", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..3856c5e5a2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA Silk @U1 0.8 nozzle", + "from": "system", + "setting_id": "GpTeZsC8ST8UvkKe", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "30" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..ef43a62cc1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", + "from": "system", + "setting_id": "75HoJsG7nurT9m8o", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "pressure_advance": [ + "0.24" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..9ab350a7ba --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1", + "from": "system", + "setting_id": "2S7b7VwKFkZuXTHB", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "pressure_advance": [ + "0.024" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..ab657264ad --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", + "from": "system", + "setting_id": "e3hivxxVP4MEauB0", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "pressure_advance": [ + "0.024" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..5e9be868b6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "from": "system", + "setting_id": "0ZOycCmSyLf9Zr3f", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "60" + ], + "pressure_advance": [ + "0.0216" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json new file mode 100644 index 0000000000..b7b8357798 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle", + "inherits": "Snapmaker PLA Translucent @U1 0.2 nozzle", + "from": "system", + "setting_id": "atEZp48A9Ajefn5P", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "pressure_advance": [ + "0.18" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1.6 x 3 = 4.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "4.8" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..67a5c77f4a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Translucent @U1 0.4 nozzle", + "from": "system", + "setting_id": "OhPRQfEeCCBos1Xk", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "pressure_advance": [ + "0.024" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "36" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..29767b5045 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA Translucent @U1 0.6 nozzle", + "from": "system", + "setting_id": "UkjutA0LDsne1Kr4", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "pressure_advance": [ + "0.024" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "36" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..6790f2a521 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA Translucent @U1 0.8 nozzle", + "from": "system", + "setting_id": "IEcagoFA1np00DZq", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "pressure_advance": [ + "0.024" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "36" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..95ef69bb13 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA Wood @U1 0.4 nozzle", + "from": "system", + "setting_id": "7IGP2hVMK7ajiLuk", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "filament_retract_length_toolchange": [ + "6" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "pressure_advance": [ + "0.024" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..71e3f69b98 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA Wood @U1 0.6 nozzle", + "from": "system", + "setting_id": "8tH46AUyW4uua5QB", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "pressure_advance": [ + "0.0134" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..9bcde49fd5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA Wood @U1 0.8 nozzle", + "from": "system", + "setting_id": "LW5RkXBTM4eE3eRK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "pressure_advance": [ + "0.0067" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "60" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..c61a287426 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PLA-CF @U1 0.4 nozzle", + "from": "system", + "setting_id": "ork4mVEyJBzXs2Xj", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_max_volumetric_speed": [ + "45" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retract_length_toolchange": [ + "15" + ], + "filament_retraction_length": [ + "0.8" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.02" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..825567e128 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PLA-CF @U1 0.6 nozzle", + "from": "system", + "setting_id": "c982QxKnlzVRADnm", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "pressure_advance": [ + "0.03" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..52100f6bbe --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PLA-CF @U1 0.8 nozzle", + "from": "system", + "setting_id": "4qXeMrTt9pZNCwEr", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "54" + ], + "pressure_advance": [ + "0.03" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..e96baac97a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Snapmaker PVA @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker PVA @U1", + "from": "system", + "setting_id": "NZwDYFscSMlZJusK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_notes": [ + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 5 x 3 = 15 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..1fb7bc978a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Snapmaker PVA @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker PVA @U1 0.6 nozzle", + "from": "system", + "setting_id": "AO1DsQ9uGg1ivN8b", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_flow_ratio": [ + "0.9506" + ], + "filament_notes": [ + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "18" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..cfdd941bc8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Snapmaker PVA @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker PVA @U1 0.8 nozzle", + "from": "system", + "setting_id": "xy6MMfFlgvgrP0Xj", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_flow_ratio": [ + "0.9312" + ], + "filament_notes": [ + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ], + "filament_max_volumetric_speed": [ + "18" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..4b03c0e63d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPE @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPE @U1", + "from": "system", + "setting_id": "wLR0Jg5KEPd18zik", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "21.6" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.2 x 3 = 21.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..130bba2045 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPU 90A @U1", + "from": "system", + "setting_id": "xAMUl2DDEuMrrzAs", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..d999f651f1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker TPU 90A @U1 0.6 nozzle", + "from": "system", + "setting_id": "URpA1Br6ZxbbV0IF", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..b49d1d3a09 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker TPU 90A @U1 0.8 nozzle", + "from": "system", + "setting_id": "nECpLUQc8O9JE4em", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "10.5" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.5 x 3 = 10.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..55ba8da2db --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPU 95A @U1", + "from": "system", + "setting_id": "Ywz3Y08u16nlPSuD", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "9.6" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..461dcf6e69 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPU 95A HF @U1", + "from": "system", + "setting_id": "hVOeZYtFdD5f9n8N", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "27" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 9 x 3 = 27 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..416cfe0097 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker TPU 95A HF @U1 0.6 nozzle", + "from": "system", + "setting_id": "gkRhqrvJIZh1o3wJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "36" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..9971dabbf2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker TPU 95A HF @U1 0.8 nozzle", + "from": "system", + "setting_id": "ILlLnES7BQLAKxnH", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "48" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..48d709b12d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPU @U1", + "from": "system", + "setting_id": "fzFdqg3bAFNCOB7S", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "8.4" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..8af4584d0a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker TPU @U1", + "from": "system", + "setting_id": "qABR1pUxRSY6jSAk", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "8.4" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..6009f90585 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker TPU @U1", + "from": "system", + "setting_id": "fgWdX41gAzkDoAW5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "8.4" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json new file mode 100644 index 0000000000..d34d28c7b5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle", + "inherits": "Snapmaker TPU High-Flow @U1", + "from": "system", + "setting_id": "UFqQnkKICuivJWiW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.8" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json new file mode 100644 index 0000000000..34cf3796f5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle", + "inherits": "Snapmaker TPU High-Flow @U1", + "from": "system", + "setting_id": "E5Y9PFB8elCm2yGh", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.8" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json new file mode 100644 index 0000000000..9453bf939b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle", + "inherits": "Snapmaker TPU High-Flow @U1", + "from": "system", + "setting_id": "FXqeu1WlfeqwdbrM", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "filament_max_volumetric_speed": [ + "22.8" + ], + "filament_notes": [ + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament." + ] +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..9afb250476 --- /dev/null +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "rypfKOLmPmXpR3Z9", + "instantiation": "true", + "printer_model": "Snapmaker U1", + "printer_variant": "0.2 High Flow", + "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.", + "default_filament_profile": [ + "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle" + ], + "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)" +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..f8b8d44e10 --- /dev/null +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "YVXcn9a2pyGfl8wo", + "instantiation": "true", + "printer_model": "Snapmaker U1", + "printer_variant": "0.4 High Flow", + "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.", + "default_filament_profile": [ + "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle" + ], + "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)" +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..53c0d682cd --- /dev/null +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "7Nqiw8MQIWaQqB1R", + "instantiation": "true", + "printer_model": "Snapmaker U1", + "printer_variant": "0.6 High Flow", + "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.", + "default_filament_profile": [ + "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle" + ], + "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)" +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..ded207ffbf --- /dev/null +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "aTs5dXyBbXItUEeS", + "instantiation": "true", + "printer_model": "Snapmaker U1", + "printer_variant": "0.8 High Flow", + "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.", + "default_filament_profile": [ + "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle", + "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle" + ], + "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)" +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json index 96eb53f81a..0b5f8c8a93 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json @@ -8,5 +8,5 @@ "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle", "bed_model": "Snapmaker U1_bed.stl", "bed_texture": "Snapmaker U1_texture.svg", - "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8" + "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow" } diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..3deab05cdd --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "LFjXyYMCx6Oy12PQ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..f48dfa5c3b --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "nMJ1UXr4uyWr62Nx", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..8fd4c1cbe7 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "iyzOhKe7WcJvxmQu", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..b9e42b5d79 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "CaOHxJpx23e32eZm", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..a7141e48f1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "3Jsj1rKIzF9dhszS", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..c81c177341 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "Dk5x3oI8wrO1SYDF", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..ab2f3430c6 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "AEdUWWIQuuIvPX48", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..9dbcbb12da --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "k5ltb2fjXfHavuJl", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..77bb9d98a9 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.12 Fine @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "68ArVT2y9MR8cLZ1", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..e052a9e517 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "m9GIExQJEdmIA0t2", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..dc46dd6014 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "VYRDtZXoZWqcHBJP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json new file mode 100644 index 0000000000..08451b8fa7 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)", + "inherits": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", + "from": "system", + "setting_id": "NPQCD2bScfCwZAGP", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..cbf3b13b75 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "Wkl0CFo4qXv79E1W", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..9ed96478f2 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "xGaLQMk52ZD5ZqJh", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..9410d42ef5 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "aW5X8f9lb5haKlWj", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..1a680858b1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.20 Quality @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "g8JVHkdQOCWRZZf5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..de45cf42f9 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "5EHp34T55kiTtt68", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..dbaa4cac78 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.20 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "l3KpKbqxUGKTjO0t", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..cc1c08848c --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.20 Strength @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "jTYxPrkfNAXXeElO", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..d305323789 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.20 Support @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "o2uNeeRv8JNXAuD0", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..6bbd70ca8b --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.20 Support W @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "rLdRXBKLSDdjsSs9", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..ea99859bc7 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.24 Draft @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "cZfx1x9K6oYUG6nK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..1072a08efa --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "PvF43C7HiDhd7BKg", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..7844a38bf1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "FAVs0dNRa86OWdzy", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..bc50c410c5 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "21Yht5aHJVG0XebG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json new file mode 100644 index 0000000000..bd58038ed9 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)", + "inherits": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)", + "from": "system", + "setting_id": "ofB4cQcZJ2Lkze83", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..00494a3516 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.30 Draft @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "K3aD6VMSmWStekaW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..46de759eb1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "G8jjRPwut6AkuW7w", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..40e31b320f --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "4S1DO4sXQX2RXSjC", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..c74cf8b309 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "6k3IeQoysYKUxTxG", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..aab911513d --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "4c5vbxTAK6TVyTpg", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..3d3a341e2b --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "vWhACedmOjulskG0", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..1981348438 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "YEOmDIj6IFBHwvTr", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json new file mode 100644 index 0000000000..cca40610a9 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)", + "inherits": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", + "from": "system", + "setting_id": "kXJPwKEtZ6kSTvcm", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..b976586099 --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "BTuUnaHxKcjQlOv9", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +} diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json new file mode 100644 index 0000000000..091c301acf --- /dev/null +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)", + "inherits": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", + "from": "system", + "setting_id": "VrtVj7ZWFPegxXaW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 High Flow nozzle)" + ], + "inner_wall_speed": [ + "600" + ], + "outer_wall_speed": [ + "500" + ], + "internal_solid_infill_speed": [ + "600" + ], + "sparse_infill_speed": [ + "600" + ] +}