QIDI: Disable Reduce infill retraction (#13267)

* 关掉减小填充回抽功能 * 关掉减小填充回抽功能 * Update Qidi X-Max 4 0.4 nozzle.json Optimize the starting code of MAX4
2026-05-19 19:33:47 +00:00 · 2026-04-23 00:00:18 +08:00
parent 1cc38cda06
commit 3611903b8d
37 changed files with 37 additions and 37 deletions
--- a/resources/profiles/Qidi/machine/Qidi
+++ b/resources/profiles/Qidi/machine/Qidi
@@ -57,7 +57,7 @@
 	"machine_max_speed_y": [
 		"800"
 	],
-	"machine_start_gcode": "INIT_MAPPING_VALUE\n;===== PRINT_PHASE_INIT =====\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nSET_PRINT_MAIN_STATUS MAIN_STATUS=print_start\nM220 S100\nM221 S100\nSET_INPUT_SHAPER SHAPER_TYPE_X=mzv\nSET_INPUT_SHAPER SHAPER_TYPE_Y=mzv\nDISABLE_ALL_SENSOR\nM1002 R1\nM107\nCLEAR_PAUSE\nM140 S[bed_temperature_initial_layer_single]\nM141 S[chamber_temperature]\nG29.0\nG28\n\n;===== BOX_PREPAR =====\nBOX_PRINT_START EXTRUDER=[initial_no_support_extruder] HOTENDTEMP={nozzle_temperature_range_high[initial_tool]}\nM400\nEXTRUSION_AND_FLUSH HOTEND=[nozzle_temperature_initial_layer]\n\n;===== CLEAR_NOZZLE =====\nG1 Z20 F480\nMOVE_TO_TRASH\nG1 Y403.5 F2000\n{if chamber_temperature[0] == 0}\nM106 P3 S[during_print_exhaust_fan_speed]\n{else}\nM106 P3 S0\n{endif}\nM1004\nM106 S0\nM109 S[nozzle_temperature_initial_layer]\nG92 E0\nM83\nG1 E5 F80\nG1 E250 F300\nM400\nM106 S255\nG1 E-3 F1000\nM104 S140\nM109.1 S{nozzle_temperature_initial_layer[0]-30}\nM204 S10000\nG1 Y403 F2000\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 Y395 F6000\nG1 X188\nG1 Z-0.2 F480\nM106 S255\nM109.1 S150\nG91\nG1 X15 F200\nG1 Y2\nG1 X-15\nG1 Y-2\nG1 X15\nG90\nG2 I0.5 J0.5 F480\nG2 I0.5 J0.5\nG2 I0.5 J0.5\nG1 Z10\nG1 Y383 F12000\nG1 X116\nG1 Y403\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 X195 Y195\nM106 S0\nM190 S[bed_temperature_initial_layer_single]\nM191 S[chamber_temperature]\nM400\nSET_OPERATING_CURRENT STEPPER=x VALUE=1500\nG4 P400\nSET_OPERATING_CURRENT STEPPER=y VALUE=1500\nG4 P400\nG1 Y0 F15000\nG1 X15\nG1 X3 F5000\nG4 P1000\nG1 X4 F1000\nG1 X3 F5000\nG4 P1000\nG1 E-4 F1800\nG1 X15 F3000\n\nM400\nSET_OPERATING_CURRENT STEPPER=x VALUE=1200\nG4 P400\nSET_OPERATING_CURRENT STEPPER=y VALUE=1200\nG4 P2000\nG1 X20 Y20 F15000\nZ_TILT_ADJUST\nG29\nM1002 A1\nG1 X195 Y195 Z10 F20000\nG92_ Z{10 - ((nozzle_temperature_initial_layer[initial_tool] - 130) / 14 - 5.0) / 100}\nG0 Y1\nM109 S[nozzle_temperature_initial_layer]\nENABLE_ALL_SENSOR\n\n;===== PRINT_START =====\n; LAYER_HEIGHT: 0.2\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nprobe samples=1\nG91\nG0 Z0.6 F480\nG90\nG1 X175 Y1 F20000\nG1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 X215 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 Z1 F480\nSET_PRINT_MAIN_STATUS MAIN_STATUS=printing",
+    "machine_start_gcode": ";===== PRINT_PHASE_INIT =====\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nSET_PRINT_MAIN_STATUS MAIN_STATUS=print_start\nM220 S100\nM221 S100\nSET_INPUT_SHAPER SHAPER_TYPE_X=mzv\nSET_INPUT_SHAPER SHAPER_TYPE_Y=mzv\nDISABLE_ALL_SENSOR\nM1002 R1\nM107\nCLEAR_PAUSE\nM140 S[bed_temperature_initial_layer_single]\nM141 S[chamber_temperature]\nG29.0\nSET_PRINT_SUB_STATUS SUB_STATUS=tool_head_reset\nG28\n\n;===== BOX_PREPAR =====\nSET_PRINT_SUB_STATUS SUB_STATUS=change_filament\nBOX_PRINT_START EXTRUDER=[initial_no_support_extruder] HOTENDTEMP={nozzle_temperature_range_high[initial_tool]}\nM400\nEXTRUSION_AND_FLUSH HOTEND=[nozzle_temperature_initial_layer]\n\n;===== CLEAR_NOZZLE =====\nSET_PRINT_SUB_STATUS SUB_STATUS=flush_filament\nG1 Z20 F480\nMOVE_TO_TRASH\nG1 Y403.5 F2000\n{if chamber_temperature[0] == 0}\nM106 P3 S[during_print_exhaust_fan_speed]\n{else}\nM106 P3 S0\n{endif}\nM1004\nM106 S0\nM109 S[nozzle_temperature_initial_layer]\nG92 E0\nM83\nG1 E5 F80\nG1 E250 F300\nM400\nM106 S255\nG1 E-3 F1000\nM104 S140\nSET_PRINT_SUB_STATUS SUB_STATUS=clear_nozzle\nM109.1 S{nozzle_temperature_initial_layer[0]-30}\nM204 S10000\nG1 Y403 F2000\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 Y395 F6000\nG1 X188\nG1 Z-0.2 F480\nM106 S255\nM109.1 S150\nG91\nG1 X15 F200\nG1 Y2\nG1 X-15\nG1 Y-2\nG1 X15\nG90\nG2 I0.5 J0.5 F480\nG2 I0.5 J0.5\nG2 I0.5 J0.5\nG1 Z10\nG1 Y383 F12000\nG1 X116\nG1 Y403\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 X195 Y195\nM106 S0\nSET_PRINT_SUB_STATUS SUB_STATUS=wait_bed_temp\nM190 S[bed_temperature_initial_layer_single]\nSET_PRINT_SUB_STATUS SUB_STATUS=wait_chamber_temp\nM191 S[chamber_temperature]\nG1 Y0 F15000\nG1 X15\nG1 X3 F5000\nG4 P1000\nG1 X4 F1000\nG1 X3 F5000\nG4 P1000\nG1 E-4 F1800\nG1 X15 F3000\nG1 X20 Y20 F15000\nSET_PRINT_SUB_STATUS SUB_STATUS=z_tilt_adjust\nZ_TILT_ADJUST\nSET_PRINT_SUB_STATUS SUB_STATUS=auto_bed_adjust\nG29\nM1002 A1\nG1 X195 Y195 Z10 F20000\nG92_ Z{10 - ((nozzle_temperature_initial_layer[initial_tool] - 130) / 14 - 5.0) / 100}\nG0 Y1\nM109 S[nozzle_temperature_initial_layer]\nENABLE_ALL_SENSOR\n\n;===== PRINT_START =====\n; LAYER_HEIGHT: 0.2\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nprobe samples=1\nG91\nG0 Z0.6 F480\nG90\nG1 X175 Y1 F20000\nG1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 X215 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 Z1 F480\nSET_PRINT_MAIN_STATUS MAIN_STATUS=printing",
 	"nozzle_diameter": [
 		"0.4"
 	],
--- a/resources/profiles/Qidi/process/0.12mm
+++ b/resources/profiles/Qidi/process/0.12mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.12mm
+++ b/resources/profiles/Qidi/process/0.12mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.12mm
+++ b/resources/profiles/Qidi/process/0.12mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.12mm
+++ b/resources/profiles/Qidi/process/0.12mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.16mm
+++ b/resources/profiles/Qidi/process/0.16mm
@@ -32,7 +32,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.16mm
+++ b/resources/profiles/Qidi/process/0.16mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.16mm
+++ b/resources/profiles/Qidi/process/0.16mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.16mm
+++ b/resources/profiles/Qidi/process/0.16mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.20mm
+++ b/resources/profiles/Qidi/process/0.20mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.20mm
+++ b/resources/profiles/Qidi/process/0.20mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.20mm
+++ b/resources/profiles/Qidi/process/0.20mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.24mm
+++ b/resources/profiles/Qidi/process/0.24mm
@@ -30,7 +30,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.25mm
+++ b/resources/profiles/Qidi/process/0.25mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.28mm
+++ b/resources/profiles/Qidi/process/0.28mm
@@ -30,7 +30,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -43,7 +43,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -36,7 +36,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/0.30mm
+++ b/resources/profiles/Qidi/process/0.30mm
@@ -35,7 +35,7 @@
 	"ironing_flow": "15%",
 	"ironing_spacing": "0.1",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"inner_wall_line_width": "0.45",
--- a/resources/profiles/Qidi/process/fdm_process_n_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_n_common.json
@@ -116,7 +116,7 @@
 	"print_settings_id": "",
 	"raft_layers": "0",
 	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"resolution": "0.012",
 	"seam_position": "aligned",
 	"seam_placement_away_from_overhangs": "0",
--- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json
@@ -41,7 +41,7 @@
 	"ironing_spacing": "0.1",
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
--- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
@@ -62,7 +62,7 @@
 	"ironing_speed": "30",
 	"ironing_type": "no ironing",
 	"layer_height": "0.2",
-	"reduce_infill_retraction": "1",
+	"reduce_infill_retraction": "0",
 	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",