From 31aa149a1e87f3c074d38c039fee51df6fdcc3b9 Mon Sep 17 00:00:00 2001 From: innovatiQ Date: Sat, 9 Aug 2025 05:07:36 +0200 Subject: [PATCH] InnovatiQ additional material (#10295) * Added InnovatiQ Vendor Files * Cover image corrected * Corrected Texture Image * Support Interface Pattern modified * Fix file name casing * Added new filament(PETG) --------- Co-authored-by: MohanS Co-authored-by: Noisyfox Co-authored-by: Ashidsha Jaleel Co-authored-by: SoftFever --- resources/profiles/iQ.json | 8 + ... Polymax black P1 @iQ TiQ2 0.4 Nozzle.json | 309 ++++++++++++++++++ ...- PETG Polymax Polymaker (0.4 Nozzle).json | 73 +++++ 3 files changed, 390 insertions(+) create mode 100644 resources/profiles/iQ/filament/Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle.json create mode 100644 resources/profiles/iQ/process/0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle).json diff --git a/resources/profiles/iQ.json b/resources/profiles/iQ.json index 21b32db5bb..4b86dddb6a 100644 --- a/resources/profiles/iQ.json +++ b/resources/profiles/iQ.json @@ -43,6 +43,10 @@ { "name": "0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle)", "sub_path": "process/0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle).json" + }, + { + "name": "0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle)", + "sub_path": "process/0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle).json" } ], @@ -58,6 +62,10 @@ { "name": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle", "sub_path": "filament/Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle.json" + }, + { + "name": "Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle", + "sub_path": "filament/Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle.json" } ] diff --git a/resources/profiles/iQ/filament/Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle.json b/resources/profiles/iQ/filament/Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle.json new file mode 100644 index 0000000000..f60be61f75 --- /dev/null +++ b/resources/profiles/iQ/filament/Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle.json @@ -0,0 +1,309 @@ +{ + "type": "filament", + "name": "Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_common", + "filament_id": "IQM3", + "settings_id": "IQS3", + + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "compatible_printers": [ + "iQ TiQ2 0.4 Nozzle" + ], + "compatible_printers_condition": "", + "compatible_prints": [ + "0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle)" + ], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "default_filament_colour": [ + "#000000" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "0" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \nG1 Z{layer_z+2} F900 ; safe distance for T0 while tool change\nG1 X-17 Y1 F9000\nG1 X-17 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000" + ], + "filament_flow_ratio": [ + "0.9405" + ], + + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_settings_id": [ + "Polymaker PETG Polymax black P1 @iQ TiQ2 0.4 Nozzle" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\nG1 X-17 Y1 F9000\nG1 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000\n{if layer_z==0}G1 Z{first_layer_height + 2.0}{endif}\n{if layer_z==0}G1 X[first_layer_print_min_0] Y[first_layer_print_min_1]{endif}\n{if layer_z==0}G1 Z{layer_z}{endif}" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PETG Polymax" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "iQ Materials" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "idle_temperature": [ + "210" + ], + + "internal_bridge_fan_speed": [ + "-1" + ], + "ironing_fan_speed": [ + "-1" + ], + "is_custom_defined": "0", + + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "76" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "version": "2.3.0.4" +} diff --git a/resources/profiles/iQ/process/0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle).json b/resources/profiles/iQ/process/0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle).json new file mode 100644 index 0000000000..570fef2884 --- /dev/null +++ b/resources/profiles/iQ/process/0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle).json @@ -0,0 +1,73 @@ +{ + "type": "process", + "exclude_object": "0", + "from": "system", + "gcode_label_objects": "0", + "instantiation": "true", + "enable_support": "1", + "support_type": "tree(auto)", + "support_filament": "1", + "support_interface_filament": "1", + "compatible_printers": ["iQ TiQ2 0.4 Nozzle"], + "inherits": "fdm_process_tiq_common", + "bottom_shell_layers": "4", + "bridge_flow": "1", + "bridge_speed": "50", + "default_acceleration": "1500", + "enable_overhang_speed": "0", + "enable_prime_tower": "0", + "gap_infill_speed": "50", + "initial_layer_infill_speed": "25", + "initial_layer_speed": "25", + "initial_layer_travel_speed": "50%", + "inner_wall_acceleration": "1500", + "inner_wall_speed": "50", + "internal_bridge_speed": "150%", + "internal_solid_infill_speed": "50", + "is_custom_defined": "0", + "name": "0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle)", + "notes": "Deutsch P1 Polymaker Polymax PETG Readme\n1.\tÜberprüfen Sie, dass sich das Polymaker Polymax PETG im linken Extruder befindet. Halten Sie das Filament trocken! Detailierte Trocknungsanleitung, siehe unten.\n2.\tÜberprüfen Sie, dass sich eine 0,4 mm Wolfram-Kupfer Düse im linken Extruder befindet.\n3.\tVerwenden Sie Magigoo Kleber auf der PET-Folie, um eine bessere Haftung zu gewährleisten. ( im Singledruck in der Regel auf PET-Folie nicht erforderlich)\n4.\tReinigen Sie ggf. die Düse mit einer Messing-Drahtbürste.\nNun sind sie bereit, um Ihren Druck zu starten.\n\nAnleitung zum Trocknen von PETG:\nPETG-ESD ist hydrophil. Wenn Sie Stringing und Oozing an Ihrem Bauteil beobachten, ist dies ein Indiz dafür, dass das Filament zu feucht ist. Um das Filament zu trocknen, belassen Sie die Spule in einem industriellen Ofen bei 70°C für 8 Stunden.\n\nEnglish P1 Polymaker Polymax PETG\n1.\tCheck Left extruder filament: Polymaker Polymax PETG - Keep the filament dry!! Detailed drying instruction below.\n2.\tCheck left extruder nozzle: 0.4mm Wolfram\n3.\tCheck bed: PET with Magigoo glue (not realy needed in a singelprint)\n4.\tCheck nozzle: Clean it with brush\nWELLDONE! YOU ARE READY NOW TO START YOUR PRINT JOB!\n\nFILAMENT DRYING INSTRUCTION\nPETG-ESD material is hydroscopic. If you feel you have stringing and oozing in your printed part, the filament have moisture in it.\nTo dry the filament, keep the spool in a industrial oven for 8 hours at 70°C.\n", + "ooze_prevention": "0", + "outer_wall_acceleration": "1500", + "outer_wall_speed": "50", + "print_settings_id": "0.20mm Standard @iQ TiQ2 P1 - PETG Polymax Polymaker (0.4 Nozzle)", + "raft_first_layer_density": "100%", + "raft_first_layer_expansion": "6", + "reduce_crossing_wall": "0", + "skirt_loops": "3", + "slow_down_layers": "1", + "small_perimeter_threshold": "0", + "sparse_infill_density": "30%", + "sparse_infill_pattern": "rectilinear", + "sparse_infill_speed": "50", + "support_angle": "0", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_expansion": "0", + "support_interface_top_layers": "3", + "support_line_width": "100%", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_speed": "50", + "support_top_z_distance": "0.27", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "1500", + "top_surface_speed": "50", + "travel_acceleration": "1500", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "8", + "tree_support_tip_diameter": "0.8", + "tree_support_wall_count": "2", + "version": "2.3.0.2", + "wall_direction": "ccw", + "wall_loops": "3", + "wall_sequence": "inner-outer-inner wall", + "support_base_pattern": "rectilinear-grid", + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": "0", + "small_perimeter_speed": "30%", + "brim_type": "no_brim" + +}