diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json
index 8e3b8b6b27..a430575b6e 100644
--- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json	
@@ -24,9 +24,9 @@
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.05",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "105%",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.42",
+	"line_width": "105%",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
@@ -34,10 +34,10 @@
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
 	"outer_wall_acceleration": "4000",
-	"initial_layer_line_width": "0.5",
+	"initial_layer_line_width": "125%",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "112.5%",
 	"infill_wall_overlap": "25%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -51,7 +51,7 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "35",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "112.5%",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_line_width": "112.5%",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -70,7 +70,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.16",
 	"support_filament": "0",
-	"support_line_width": "0.42",
+	"support_line_width": "105%",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "4",
@@ -87,7 +87,7 @@
 	"tree_support_wall_count": "0",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonicline",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "105%",
 	"top_shell_layers": "5",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json
index d0357c0246..1c9b2e4ba2 100644
--- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json	
@@ -24,9 +24,9 @@
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.05",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "105%",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.42",
+	"line_width": "105%",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
@@ -34,10 +34,10 @@
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
 	"outer_wall_acceleration": "4000",
-	"initial_layer_line_width": "0.5",
+	"initial_layer_line_width": "125%",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "112.5%",
 	"infill_wall_overlap": "25%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -51,7 +51,7 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "35",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "112.5%",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_line_width": "112.5%",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -70,7 +70,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.16",
 	"support_filament": "0",
-	"support_line_width": "0.42",
+	"support_line_width": "105%",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "3",
@@ -87,7 +87,7 @@
 	"tree_support_wall_count": "0",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonicline",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "105%",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json
index 6321b57e8b..cd537ebbdf 100644
--- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json	
@@ -25,9 +25,9 @@
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.05",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "105%",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.42",
+	"line_width": "105%",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
@@ -35,10 +35,10 @@
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
 	"outer_wall_acceleration": "4000",
-	"initial_layer_line_width": "0.5",
+	"initial_layer_line_width": "125%",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "112.5%",
 	"infill_wall_overlap": "25%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -52,7 +52,7 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "35",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "112.5%",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_line_width": "112.5%",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -71,7 +71,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.16",
 	"support_filament": "0",
-	"support_line_width": "0.42",
+	"support_line_width": "105%",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -88,7 +88,7 @@
 	"tree_support_wall_count": "0",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonicline",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "105%",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",
diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json
index 12a55c48b3..0322897130 100644
--- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
+++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json	
@@ -24,9 +24,9 @@
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.05",
-	"outer_wall_line_width": "0.42",
+	"outer_wall_line_width": "105%",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.42",
+	"line_width": "105%",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
@@ -34,10 +34,10 @@
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
 	"outer_wall_acceleration": "4000",
-	"initial_layer_line_width": "0.5",
+	"initial_layer_line_width": "125%",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "112.5%",
 	"infill_wall_overlap": "25%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -51,7 +51,7 @@
 	"overhang_2_4_speed": "50",
 	"overhang_3_4_speed": "35",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "112.5%",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_line_width": "112.5%",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -70,7 +70,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.16",
 	"support_filament": "0",
-	"support_line_width": "0.42",
+	"support_line_width": "105%",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "2",
@@ -87,7 +87,7 @@
 	"tree_support_wall_count": "0",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonicline",
-	"top_surface_line_width": "0.42",
+	"top_surface_line_width": "105%",
 	"top_shell_layers": "4",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "50",