Lozalization Update after refactor (#14272)

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -7892,10 +7892,10 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
 msgstr ""
 
 msgid "Network plug-in version"
@@ -8010,6 +8010,9 @@ msgstr ""
 msgid "trace"
 msgstr ""
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -11753,7 +11756,9 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr ""
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
 msgstr ""
 
 msgid "Pressure advance for bridges"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -8268,11 +8268,11 @@ msgstr "Filament i color"
 msgid "Color only"
 msgstr "Només color"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Connector de xarxa"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Habilita el plugin de xarxa"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Versió del connector de xarxa"
@@ -8399,6 +8399,9 @@ msgstr "depurar"
 msgid "trace"
 msgstr "traça"
 
+msgid "Network plug-in"
+msgstr "Connector de xarxa"
+
 msgid "Reload"
 msgstr "Recarrega"
 
@@ -12461,8 +12464,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Habilita l'avanç de pressió adaptativa per als voladissos (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Habiliteu PA adaptatiu per als voladissos, així com quan canvia el flux dins de la mateixa característica. Aquesta és una opció experimental, ja que si el perfil PA no es configura amb precisió, provocarà problemes d'uniformitat a les superfícies externes abans i després dels voladissos.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Avanç de pressió per als ponts"
@@ -19290,6 +19295,12 @@ msgstr ""
 "Evitar la deformació( warping )\n"
 "Sabíeu que quan imprimiu materials propensos a deformar-se, com ara l'ABS, augmentar adequadament la temperatura del llit pot reduir la probabilitat de deformació?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Habilita el plugin de xarxa"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Habiliteu PA adaptatiu per als voladissos, així com quan canvia el flux dins de la mateixa característica. Aquesta és una opció experimental, ja que si el perfil PA no es configura amb precisió, provocarà problemes d'uniformitat a les superfícies externes abans i després dels voladissos.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Realitzar"
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -8268,11 +8268,11 @@ msgstr "Filament a barva"
 msgid "Color only"
 msgstr "Pouze barva"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Síťový plugin"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Povolit síťový plugin"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Verze síťového pluginu"
@@ -8396,6 +8396,9 @@ msgstr "ladění"
 msgid "trace"
 msgstr "trasování"
 
+msgid "Network plug-in"
+msgstr "Síťový plugin"
+
 msgid "Reload"
 msgstr "Znovu načíst"
 
@@ -12470,8 +12473,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Povolit adaptivní pressure advance pro převisy (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Povolit adaptivní PA pro převisy a při změně průtoku v rámci jedné vlastnosti. Tato volba je experimentální – pokud není PA profil přesně nastaven, může způsobit nesrovnalosti na vnějších površích před a po převisu.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Pressure advance pro mosty"
@@ -19328,6 +19333,12 @@ msgstr ""
 "Zamezte kroucení\n"
 "Víte, že při tisku materiálů náchylných ke kroucení, jako je ABS, může vhodné zvýšení teploty vyhřívané desky snížit pravděpodobnost kroucení?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Povolit síťový plugin"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Povolit adaptivní PA pro převisy a při změně průtoku v rámci jedné vlastnosti. Tato volba je experimentální – pokud není PA profil přesně nastaven, může způsobit nesrovnalosti na vnějších površích před a po převisu.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Provést"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -8291,11 +8291,11 @@ msgstr "Filament und Farbe"
 msgid "Color only"
 msgstr "Nur Farbe"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Netzwerk-Plugin"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Netzwerk-Plugin aktivieren"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Netzwerk-Plugin-Version"
@@ -8424,6 +8424,9 @@ msgstr "Fehlersuche"
 msgid "trace"
 msgstr "Spurensuche"
 
+msgid "Network plug-in"
+msgstr "Netzwerk-Plugin"
+
 msgid "Reload"
 msgstr "Neu laden"
 
@@ -12571,8 +12574,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Adaptives PA für Überhänge aktivieren (experimentell)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Adaptives PA für Überhänge aktivieren, sowie wenn der Fluss innerhalb der gleichen Funktion geändert wird. Dies ist eine experimentelle Option, da bei einer ungenauen Einstellung des PA-Profils Gleichmäßigkeitsprobleme auf den externen Oberflächen vor und nach Überhängen verursacht werden.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Pressure Advance für Brücken"
@@ -19461,6 +19466,12 @@ msgstr ""
 "Verwerfungen vermeiden\n"
 "Wussten Sie, dass beim Drucken von Materialien, die zu Verwerfungen neigen, wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die Wahrscheinlichkeit von Verwerfungen verringert werden kann?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Netzwerk-Plugin aktivieren"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Adaptives PA für Überhänge aktivieren, sowie wenn der Fluss innerhalb der gleichen Funktion geändert wird. Dies ist eine experimentelle Option, da bei einer ungenauen Einstellung des PA-Profils Gleichmäßigkeitsprobleme auf den externen Oberflächen vor und nach Überhängen verursacht werden.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Ausführen"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -7888,10 +7888,10 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
 msgstr ""
 
 msgid "Network plug-in version"
@@ -8006,6 +8006,9 @@ msgstr ""
 msgid "trace"
 msgstr ""
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -11749,7 +11752,9 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr ""
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
 msgstr ""
 
 msgid "Pressure advance for bridges"

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -8291,11 +8291,11 @@ msgstr "Filamento y color"
 msgid "Color only"
 msgstr "Solo color"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Plugin de red"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Activar el plugin de red"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Versión del plugin de red"
@@ -8421,6 +8421,9 @@ msgstr "depurar"
 msgid "trace"
 msgstr "traza"
 
+msgid "Network plug-in"
+msgstr "Plugin de red"
+
 msgid "Reload"
 msgstr "Recargar"
 
@@ -12577,8 +12580,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Activación del Avance de Presión Adaptativo para Voladizos (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Habilitar PA adaptable para voladizos, así como cuando el flujo cambia dentro de una misma característica. Se trata de una opción experimental, ya que si el perfil PA no se ajusta con precisión, causará problemas de uniformidad en las superficies externas antes y después de los voladizos.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Pressure advance para puentes"
@@ -19377,7 +19382,8 @@ msgstr ""
 "Divide tus impresiones en camas\n"
 "¿Sabías que puedes dividir un modelo con muchas piezas en camas individuales listas para imprimir? Esto simplificará el proceso de seguimiento de todas las piezas."
 
-#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height]
+#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer
+#: Height]
 #, fuzzy
 msgid ""
 "Speed up your print with Adaptive Layer Height\n"
@@ -19454,7 +19460,8 @@ msgstr ""
 "Mejorar la resistencia\n"
 "¿Sabías que puedes utilizar más bucles de perímetro y mayor densidad de relleno de baja densidad para mejorar la resistencia del modelo?"
 
-#: resources/data/hints.ini: [hint:When do you need to print with the printer door opened]
+#: resources/data/hints.ini: [hint:When do you need to print with the printer
+#: door opened]
 #, fuzzy
 msgid ""
 "When do you need to print with the printer door opened?\n"
@@ -19472,6 +19479,12 @@ msgstr ""
 "Evita la deformación\n"
 "¿Sabías que al imprimir materiales propensos a la deformación como el ABS, aumentar adecuadamente la temperatura de la cama térmica puede reducir la probabilidad de deformaciones?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Activar el plugin de red"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Habilitar PA adaptable para voladizos, así como cuando el flujo cambia dentro de una misma característica. Se trata de una opción experimental, ya que si el perfil PA no se ajusta con precisión, causará problemas de uniformidad en las superficies externas antes y después de los voladizos.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Realizar"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -8287,11 +8287,11 @@ msgstr "Filament et couleur"
 msgid "Color only"
 msgstr "Couleur uniquement"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Plug-in réseau"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Activer le plug-in réseau"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Version du plug-in réseau"
@@ -8417,6 +8417,9 @@ msgstr "déboguer"
 msgid "trace"
 msgstr "tracé"
 
+msgid "Network plug-in"
+msgstr "Plug-in réseau"
+
 msgid "Reload"
 msgstr "Recharger"
 
@@ -12584,8 +12587,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Activation de l’avance de pression adaptative pour les surplombs (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Activer le PA adaptatif pour les surplombs ainsi que pour les changements de débit au sein d’un même élément. Il s’agit d’une option expérimentale, car si le profil PA n’est pas défini avec précision, il entraînera des problèmes d’uniformité sur les surfaces externes avant et après les surplombs.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Avance de pression pour les ponts"
@@ -19480,6 +19485,12 @@ msgstr ""
 "Éviter la déformation\n"
 "Saviez-vous que lors de l’impression de matériaux susceptibles de se déformer, tels que l’ABS, une augmentation appropriée de la température du plateau chauffant peut réduire la probabilité de déformation?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Activer le plug-in réseau"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Activer le PA adaptatif pour les surplombs ainsi que pour les changements de débit au sein d’un même élément. Il s’agit d’une option expérimentale, car si le profil PA n’est pas défini avec précision, il entraînera des problèmes d’uniformité sur les surfaces externes avant et après les surplombs.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Exécuter"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -8267,11 +8267,11 @@ msgstr "Filament és szín"
 msgid "Color only"
 msgstr "Csak szín"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Hálózati bővítmény"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Hálózati bővítmény engedélyezése"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Hálózati bővítmény verzió"
@@ -8400,6 +8400,9 @@ msgstr ""
 msgid "trace"
 msgstr "követés"
 
+msgid "Network plug-in"
+msgstr "Hálózati bővítmény"
+
 msgid "Reload"
 msgstr "Újratöltés"
 
@@ -12487,8 +12490,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Adaptív nyomáselőtolás engedélyezése túlnyúlásokhoz (béta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Adaptív PA engedélyezése túlnyúlásokhoz, valamint akkor is, amikor az áramlás ugyanazon jellemzőn belül változik. Ez egy kísérleti opció; ha a PA profil nincs pontosan beállítva, egyenletességi problémákat okozhat a külső felületeken a túlnyúlások előtt és után.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Nyomáselőtolás hidakhoz"
@@ -19359,6 +19364,12 @@ msgstr ""
 "Kunkorodás elkerülése\n"
 "Tudtad, hogy a kunkorodásra hajlamos anyagok (például ABS) nyomtatásakor a tárgyasztal hőmérsékletének növelése csökkentheti a kunkorodás valószínűségét?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Hálózati bővítmény engedélyezése"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Adaptív PA engedélyezése túlnyúlásokhoz, valamint akkor is, amikor az áramlás ugyanazon jellemzőn belül változik. Ez egy kísérleti opció; ha a PA profil nincs pontosan beállítva, egyenletességi problémákat okozhat a külső felületeken a túlnyúlások előtt és után.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Alkalmaz"
 

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -8260,11 +8260,11 @@ msgstr "Filamento e colore"
 msgid "Color only"
 msgstr "Solo colore"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Modulo di rete"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Abilita modulo di rete"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Versione modulo di rete"
@@ -8388,6 +8388,9 @@ msgstr ""
 msgid "trace"
 msgstr "traccia"
 
+msgid "Network plug-in"
+msgstr "Modulo di rete"
+
 msgid "Reload"
 msgstr "Ricarica"
 
@@ -12468,8 +12471,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Abilita anticipo di pressione adattiva per sporgenze (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Abilita l'anticipo di pressione adattiva per le sporgenze e per quando il flusso varia all'interno dello stesso elemento. Questa è un'opzione sperimentale, poiché se il profilo AP non è impostato in modo accurato, causerà problemi di uniformità sulle superfici esterne prima e dopo le sporgenze.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Anticipo di pressione per ponti"
@@ -19337,6 +19342,12 @@ msgstr ""
 "Evita le deformazioni\n"
 "Sapevi che quando si stampano materiali soggetti a deformazioni come l'ABS, aumentare in modo appropriato la temperatura del piano riscaldato può ridurre la probabilità di deformazione?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Abilita modulo di rete"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Abilita l'anticipo di pressione adattiva per le sporgenze e per quando il flusso varia all'interno dello stesso elemento. Questa è un'opzione sperimentale, poiché se il profilo AP non è impostato in modo accurato, causerà problemi di uniformità sulle superfici esterne prima e dopo le sporgenze.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Esegui"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -8216,11 +8216,11 @@ msgstr "フィラメントと色"
 msgid "Color only"
 msgstr "色のみ"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "ネットワークプラグイン"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "ネットワークプラグインを有効にする"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "ネットワークプラグインのバージョン"
@@ -8347,6 +8347,9 @@ msgstr "デバッグ"
 msgid "trace"
 msgstr "トレース"
 
+msgid "Network plug-in"
+msgstr "ネットワークプラグイン"
+
 msgid "Reload"
 msgstr "再読み込み"
 
@@ -12240,7 +12243,9 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr ""
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
 msgstr ""
 
 msgid "Pressure advance for bridges"
@@ -18802,6 +18807,9 @@ msgstr ""
 "反りを避ける\n"
 "ABSのような反りやすい素材を印刷する場合、ヒートベッドの温度を適切に上げることで、反りが発生する確率を下げることができることをご存知ですか？"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "ネットワークプラグインを有効にする"
+
 #~ msgid "Perform"
 #~ msgstr "適用"
 

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -8245,11 +8245,11 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "네트워크 플러그인 사용"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8369,6 +8369,9 @@ msgstr "디버그"
 msgid "trace"
 msgstr "추적"
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -12391,8 +12394,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "오버행에 대한 적응형 PA 활성화(베타)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "오버행뿐만 아니라 동일한 기능 내에서 흐름이 변경되는 경우 적응형 PA를 활성화합니다. 이는 실험적인 옵션입니다. PA 프로파일이 정확하게 설정되지 않으면 오버행 전후의 외부 표면에 균일성 문제가 발생할 수 있습니다.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "브릿지를 위한 PA"
@@ -19169,6 +19174,12 @@ msgstr ""
 "뒤틀림 방지\n"
 "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "네트워크 플러그인 사용"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "오버행뿐만 아니라 동일한 기능 내에서 흐름이 변경되는 경우 적응형 PA를 활성화합니다. 이는 실험적인 옵션입니다. PA 프로파일이 정확하게 설정되지 않으면 오버행 전후의 외부 표면에 균일성 문제가 발생할 수 있습니다.\n"
+
 #~ msgid "Perform"
 #~ msgstr "수행"
 

localization/i18n/lt/OrcaSlicer_lt.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-10-25 23:01+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -8237,11 +8237,11 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Tinklo įskiepis"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Įjungti tinklo papildinį"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8361,6 +8361,9 @@ msgstr "testavimas"
 msgid "trace"
 msgstr "sekimas"
 
+msgid "Network plug-in"
+msgstr "Tinklo įskiepis"
+
 msgid "Reload"
 msgstr ""
 
@@ -12377,8 +12380,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Įjungti prisitaikantį išankstinį slėgį iškyšoms (beta versija)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Įjunkite prisitaikantį IS iškyšoms, taip pat kai srautas keičiasi toje pačioje vietoje. Tai eksperimentinė parinktis, nes jei IS profilis nustatomas netiksliai, gali kilti išorinių paviršių vienodumo problemų prieš ir už iškyšų.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Tiltų išankstinis slėgis"
@@ -19163,6 +19168,12 @@ msgstr ""
 "Išvengti deformacijos\n"
 "Ar žinojote, kad spausdinant medžiagas, kurios linkusios deformuotis, pavyzdžiui, ABS, tinkamai padidinus kaitinimo pagrindo temperatūrą galima sumažinti deformavimosi tikimybę."
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Įjungti tinklo papildinį"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Įjunkite prisitaikantį IS iškyšoms, taip pat kai srautas keičiasi toje pačioje vietoje. Tai eksperimentinė parinktis, nes jei IS profilis nustatomas netiksliai, gali kilti išorinių paviršių vienodumo problemų prieš ir už iškyšų.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Atlikti"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -8165,11 +8165,11 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Netwerkplug-in inschakelen"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8289,6 +8289,9 @@ msgstr ""
 msgid "trace"
 msgstr ""
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr "Herladen"
 
@@ -12175,7 +12178,9 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr ""
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
 msgstr ""
 
 msgid "Pressure advance for bridges"
@@ -18759,6 +18764,9 @@ msgstr ""
 "Kromtrekken voorkomen\n"
 "Wist je dat bij het printen van materialen die gevoelig zijn voor kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Netwerkplug-in inschakelen"
+
 #~ msgid "Perform"
 #~ msgstr "Uitvoeren"
 

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -8258,11 +8258,11 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Włączenie wtyczki sieciowej"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8379,6 +8379,9 @@ msgstr "debugowanie"
 msgid "trace"
 msgstr "śledzenie"
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -12410,8 +12413,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Włącz adaptacyjny wzrost ciśnienia dla nawisów (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Włącz adaptacyjne PA zarówno dla nawisów, jak i gdy zmienia się przepływ w obrębie tego samego elementu. Jest to opcja eksperymentalna, ponieważ jeśli profil PA nie jest ustawiony dokładnie, spowoduje to problemy z jednorodnością na zewnętrznych powierzchniach przed i po nawisach.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Wzrost ciśnienia (PA) dla mostów"
@@ -19188,6 +19193,12 @@ msgstr ""
 "Unikaj odkształceń\n"
 "Czy wiesz, że podczas drukowania filamentami podatnymi na odkształcenia, takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może zmniejszyć prawdopodobieństwo odkształceń?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Włączenie wtyczki sieciowej"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Włącz adaptacyjne PA zarówno dla nawisów, jak i gdy zmienia się przepływ w obrębie tego samego elementu. Jest to opcja eksperymentalna, ponieważ jeśli profil PA nie jest ustawiony dokładnie, spowoduje to problemy z jednorodnością na zewnętrznych powierzchniach przed i po nawisach.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Wykonaj"
 

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-06-17 10:29-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -8281,11 +8281,11 @@ msgstr "Filamento e Cor"
 msgid "Color only"
 msgstr "Apenas Cor"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Plug-in de rede"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Ativar plug-in de rede"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Versão do plug-in de rede"
@@ -8409,6 +8409,9 @@ msgstr "depurar"
 msgid "trace"
 msgstr "traço"
 
+msgid "Network plug-in"
+msgstr "Plug-in de rede"
+
 msgid "Reload"
 msgstr "Recarregar"
 
@@ -12499,8 +12502,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Habilitar avanço de pressão adaptável para saliências (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Habilite o PA adaptável para saliências, bem como quando o fluxo muda dentro do mesmo recurso. Esta é uma opção experimental, pois se o perfil do PA não for definido com precisão, ele causará problemas de uniformidade nas superfícies externas antes e depois das saliências.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Avanço de pressão para pontes"
@@ -19390,6 +19395,12 @@ msgstr ""
 "Evitar empenamento\n"
 "Você sabia que ao imprimir materiais propensos ao empenamento, como ABS, aumentar adequadamente a temperatura da mesa aquecida pode reduzir a probabilidade de empenamento?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Ativar plug-in de rede"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Habilite o PA adaptável para saliências, bem como quando o fluxo muda dentro do mesmo recurso. Esta é uma opção experimental, pois se o perfil do PA não for definido com precisão, ele causará problemas de uniformidade nas superfícies externas antes e depois das saliências.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Executar"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.3.2 beta2\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -8525,11 +8525,11 @@ msgstr "Цвет и материал"
 msgid "Color only"
 msgstr "Цвет"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Сетевой плагин"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Включить сетевой плагин"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Версия сетевого плагина"
@@ -8651,6 +8651,9 @@ msgstr "отладка"
 msgid "trace"
 msgstr "трассировка"
 
+msgid "Network plug-in"
+msgstr "Сетевой плагин"
+
 msgid "Reload"
 msgstr "Перезагрузить"
 
@@ -12902,8 +12905,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Адаптивный PA на нависаниях (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Включить адаптивный Pressure Advance на нависаниях, а также при изменении потока в пределах одного и того же элемента. Это экспериментальная опция, так как неточно заданное значение PA может привести к проблемам с однородностью на внешних поверхностях до и после нависаний.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Коэффициент PA на мостах"
@@ -20196,6 +20201,12 @@ msgstr ""
 "Предотвращение коробления материала\n"
 "Знаете ли вы, что при печати материалами, склонными к короблению, таких как ABS, повышение температуры подогреваемого стола может снизить эту вероятность?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Включить сетевой плагин"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Включить адаптивный Pressure Advance на нависаниях, а также при изменении потока в пределах одного и того же элемента. Это экспериментальная опция, так как неточно заданное значение PA может привести к проблемам с однородностью на внешних поверхностях до и после нависаний.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Выполнить"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -8150,10 +8150,10 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
 msgstr ""
 
 msgid "Network plug-in version"
@@ -8272,6 +8272,9 @@ msgstr "felsök"
 msgid "trace"
 msgstr "spåra"
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr "Ladda om"
 
@@ -12148,7 +12151,9 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr ""
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
 msgstr ""
 
 msgid "Pressure advance for bridges"

localization/i18n/th/OrcaSlicer_th.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-06-04 12:39+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -8262,11 +8262,11 @@ msgstr "เส้นพลาสติกและสี"
 msgid "Color only"
 msgstr "สีเท่านั้น"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "ปลั๊กอินเครือข่าย"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "เปิดใช้งานปลั๊กอินเครือข่าย"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "เวอร์ชันปลั๊กอินเครือข่าย"
@@ -8392,6 +8392,9 @@ msgstr "แก้ปัญหา"
 msgid "trace"
 msgstr "ติดตาม"
 
+msgid "Network plug-in"
+msgstr "ปลั๊กอินเครือข่าย"
+
 msgid "Reload"
 msgstr "โหลดใหม่"
 
@@ -12469,8 +12472,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "เปิดใช้งานการปรับPressure Advanceสำหรับระยะยื่น (เบต้า)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "เปิดใช้งาน PA แบบปรับได้สำหรับส่วนยื่นและเมื่อโฟลว์เปลี่ยนแปลงภายในฟีเจอร์เดียวกัน นี่เป็นตัวเลือกทดลอง ราวกับว่าโปรไฟล์ PA ไม่ได้ตั้งค่าอย่างถูกต้อง ก็จะทำให้เกิดปัญหาความสม่ำเสมอบนพื้นผิวภายนอกก่อนและหลังระยะยื่น\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "แรงดันล่วงหน้า (Pressure Advance)สำหรับสะพาน"
@@ -19344,6 +19349,12 @@ msgstr ""
 "หลีกเลี่ยงการบิดเบี้ยว\n"
 "คุณรู้หรือไม่ว่าเมื่อพิมพ์วัสดุที่มีแนวโน้มที่จะเกิดการบิดเบี้ยว เช่น ABS การเพิ่มอุณหภูมิฐานพิมพ์อย่างเหมาะสมสามารถลดความน่าจะเป็นของการบิดเบี้ยวได้"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "เปิดใช้งานปลั๊กอินเครือข่าย"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "เปิดใช้งาน PA แบบปรับได้สำหรับส่วนยื่นและเมื่อโฟลว์เปลี่ยนแปลงภายในฟีเจอร์เดียวกัน นี่เป็นตัวเลือกทดลอง ราวกับว่าโปรไฟล์ PA ไม่ได้ตั้งค่าอย่างถูกต้อง ก็จะทำให้เกิดปัญหาความสม่ำเสมอบนพื้นผิวภายนอกก่อนและหลังระยะยื่น\n"
+
 #~ msgid "Perform"
 #~ msgstr "ดำเนินการ"
 

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-04-08 23:59+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -8252,11 +8252,11 @@ msgstr "Filament ve Renk"
 msgid "Color only"
 msgstr "Yalnızca renk"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "Ağ eklentisi"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Ağ eklentisini etkinleştir"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "Ağ eklentisi sürümü"
@@ -8380,6 +8380,9 @@ msgstr "hata ayıklama"
 msgid "trace"
 msgstr "iz"
 
+msgid "Network plug-in"
+msgstr "Ağ eklentisi"
+
 msgid "Reload"
 msgstr "Yeniden yükle"
 
@@ -12433,8 +12436,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Çıkıntılar için uyarlanabilir basınç ilerlemesini etkinleştirin (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Aynı özellik içinde akış değiştiğinde ve çıkıntılar için uyarlanabilir PA’yı etkinleştirin. Bu deneysel bir seçenektir, sanki basınç profili doğru ayarlanmazsa, çıkma öncesi ve sonrası dış yüzeylerde yeknesaklık sorunlarına neden olacaktır.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Köprüler için basınç ilerlemesi"
@@ -19253,6 +19258,12 @@ msgstr ""
 "Eğilmeyi önleyin\n"
 "ABS gibi bükülmeye yatkın malzemelere baskı yaparken, ısıtma yatağı sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını azaltabileceğini biliyor muydunuz?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Ağ eklentisini etkinleştir"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Aynı özellik içinde akış değiştiğinde ve çıkıntılar için uyarlanabilir PA’yı etkinleştirin. Bu deneysel bir seçenektir, sanki basınç profili doğru ayarlanmazsa, çıkma öncesi ve sonrası dış yüzeylerde yeknesaklık sorunlarına neden olacaktır.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Uygula"
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-03-07 09:30+0200\n"
 "Last-Translator: \n"
 "Language-Team: Ukrainian\n"
@@ -8267,11 +8267,11 @@ msgstr ""
 msgid "Color only"
 msgstr ""
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Увімкнути мережевий плагін"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8391,6 +8391,9 @@ msgstr "налагодження"
 msgid "trace"
 msgstr "слід"
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -12421,8 +12424,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Увімкнути адаптивне випередження тиску для нависань (бета)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Увімкнути адаптивний PA для нависань, а також у випадках зміни подачі матеріалу в межах однієї деталі. Це експериментальний параметр, оскільки, якщо профіль PA налаштований неточно, це може спричинити проблеми з рівномірністю зовнішніх поверхонь до і після нависань.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Випередження тиску для мостів"
@@ -19197,6 +19202,12 @@ msgstr ""
 "Уникнення деформації\n"
 "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як ABS, відповідне підвищення температури гарячого ліжка може зменшити ймовірність деформації?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Увімкнути мережевий плагін"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Увімкнути адаптивний PA для нависань, а також у випадках зміни подачі матеріалу в межах однієї деталі. Це експериментальний параметр, оскільки, якщо профіль PA налаштований неточно, це може спричинити проблеми з рівномірністю зовнішніх поверхонь до і після нависань.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Виконати"
 

localization/i18n/vi/OrcaSlicer_vi.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -8205,11 +8205,11 @@ msgstr "Sợi và Màu sắc"
 msgid "Color only"
 msgstr "Chỉ màu"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
 msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "Bật plugin mạng"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr ""
@@ -8326,6 +8326,9 @@ msgstr "gỡ lỗi"
 msgid "trace"
 msgstr "theo dõi"
 
+msgid "Network plug-in"
+msgstr ""
+
 msgid "Reload"
 msgstr ""
 
@@ -12329,8 +12332,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "Bật áp suất nâng cao thích ứng cho phần nhô (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "Bật PA thích ứng cho phần nhô cũng như khi lưu lượng thay đổi trong cùng tính năng. Đây là tùy chọn thử nghiệm, vì nếu hồ sơ PA không được đặt chính xác, nó sẽ gây ra vấn đề đồng đều trên bề mặt ngoài trước và sau phần nhô.\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "Áp suất nâng cao cho cầu"
@@ -19118,6 +19123,12 @@ msgstr ""
 "Tránh cong vênh\n"
 "Bạn có biết rằng khi in vật liệu dễ cong vênh như ABS, tăng nhiệt độ bàn nóng một cách thích hợp có thể giảm xác suất cong vênh không?"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "Bật plugin mạng"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "Bật PA thích ứng cho phần nhô cũng như khi lưu lượng thay đổi trong cùng tính năng. Đây là tùy chọn thử nghiệm, vì nếu hồ sơ PA không được đặt chính xác, nó sẽ gây ra vấn đề đồng đều trên bề mặt ngoài trước và sau phần nhô.\n"
+
 #~ msgid "Perform"
 #~ msgstr "Thực hiện"
 

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -8245,11 +8245,11 @@ msgstr "耗材丝及颜色"
 msgid "Color only"
 msgstr "仅颜色"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "网络插件"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "启用网络插件"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "网络插件版本"
@@ -8370,6 +8370,9 @@ msgstr "调试"
 msgid "trace"
 msgstr "跟踪"
 
+msgid "Network plug-in"
+msgstr "网络插件"
+
 msgid "Reload"
 msgstr "重新加载"
 
@@ -12485,8 +12488,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "为悬垂启用自适应压力提前（试验）"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "针对悬垂以及同一特征内的流量变化启用自适应 PA。这是一个实验性选项，如果 PA 轮廓设置不准确，则会导致悬垂前后外表面的均匀性问题。\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "为搭桥启用压力提前"
@@ -19379,6 +19384,12 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "启用网络插件"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "针对悬垂以及同一特征内的流量变化启用自适应 PA。这是一个实验性选项，如果 PA 轮廓设置不准确，则会导致悬垂前后外表面的均匀性问题。\n"
+
 #~ msgid "Perform"
 #~ msgstr "执行"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-06-17 14:21-0300\n"
+"POT-Creation-Date: 2026-06-18 09:16-0300\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -8302,11 +8302,11 @@ msgstr "線材與顏色"
 msgid "Color only"
 msgstr "僅顏色"
 
-msgid "Network plug-in"
+msgid "Bambu network plug-in"
-msgstr "網路外掛程式"
+msgstr ""
 
-msgid "Enable network plug-in"
+msgid "Enable Bambu network plug-in"
-msgstr "啟用網路外掛程式"
+msgstr ""
 
 msgid "Network plug-in version"
 msgstr "網路外掛程式版本"
@@ -8432,6 +8432,9 @@ msgstr "除錯"
 msgid "trace"
 msgstr "跟蹤"
 
+msgid "Network plug-in"
+msgstr "網路外掛程式"
+
 msgid "Reload"
 msgstr "重新載入"
 
@@ -12557,8 +12560,10 @@ msgstr ""
 msgid "Enable adaptive pressure advance for overhangs (beta)"
 msgstr "啟用懸挑自適應壓力補償 (beta)"
 
-msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+msgid ""
-msgstr "啟用自適應壓力補償 (PA) 功能，用於懸空部分及同一特徵的流量變化。此功能屬於實驗性選項，若 PA 設定檔不夠精確，可能會導致懸空前後外表面出現不均勻現象。\n"
+"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
+msgstr ""
 
 msgid "Pressure advance for bridges"
 msgstr "橋接的壓力補償"
@@ -19449,6 +19454,12 @@ msgstr ""
 "您知道嗎？當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度\n"
 "可以降低翹曲的機率。"
 
+#~ msgid "Enable network plug-in"
+#~ msgstr "啟用網路外掛程式"
+
+#~ msgid "Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
+#~ msgstr "啟用自適應壓力補償 (PA) 功能，用於懸空部分及同一特徵的流量變化。此功能屬於實驗性選項，若 PA 設定檔不夠精確，可能會導致懸空前後外表面出現不均勻現象。\n"
+
 #~ msgid "Perform"
 #~ msgstr "套用"