From 3baec9cf2b526f5d53a9bfafb37cf52e3a43c932 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Thu, 17 Sep 2026 07:43:16 -0400
Subject: [PATCH 01/13] Add Snapmaker U1 high-flow nozzle profiles

Add separate HF presets for 0.2, 0.4, 0.6 and 0.8 mm nozzles, preserving
standard printer settings and machine G-code. Provide 141 HF filament
presets with volumetric ceilings 3x their non-HF baseline. Generic presets
inherit active Orca material definitions; remove unregistered Snorca-only
Generic profiles and their obsolete PLA Wood dependent.

Add 36 diameter-specific HF processes, all using Snorca's 0.4 mm HF speeds:
600 mm/s inner walls, 500 mm/s outer walls, and 600 mm/s solid/sparse infill.
Preserve other process settings and keep standard-nozzle speeds unchanged.
No extra-high-flow tier or C++ changes are included.

Native profile validation passed. HF material slicing checks passed, and
all 36 HF processes sliced with verified speed settings and tool changes.
Document calibration sources, flow ceilings and remaining physical tuning.

Generate canonical preset IDs and record the eight new Snapmaker generic
claims in the filament ID snapshot. Regenerate the vendor index.

Co-authored-by: Codex <noreply@openai.com>
---
 docs/HLSD/snapmaker-high-flow.md              |  92 +++
 resources/profiles/Snapmaker.json             | 726 +++++++++++++++++-
 ...ron ASA-CF08 @U1 0.4 High Flow nozzle.json |  17 +
 ...on PA12-CF10 @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PA6-CF20 @U1 0.4 High Flow nozzle.json |  17 +
 ...on PA612-ESD @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PETG-ESD @U1 0.4 High Flow nozzle.json |  17 +
 ...ron PPS-GF20 @U1 0.4 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.2 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.4 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.6 High Flow nozzle.json |  17 +
 ...Generic PETG @U1 0.8 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.2 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.4 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.6 High Flow nozzle.json |  17 +
 ...eric PETG HF @U1 0.8 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.6 High Flow nozzle.json |  17 +
 ...eric PETG-CF @U1 0.8 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.2 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.4 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.6 High Flow nozzle.json |  17 +
 .../Generic PLA @U1 0.8 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.2 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.4 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.6 High Flow nozzle.json |  17 +
 ...A High Speed @U1 0.8 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.2 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.4 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.6 High Flow nozzle.json |  17 +
 ...ric PLA Silk @U1 0.8 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.6 High Flow nozzle.json |  17 +
 ...neric PLA-CF @U1 0.8 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.4 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.6 High Flow nozzle.json |  17 +
 .../Generic TPU @U1 0.8 High Flow nozzle.json |  17 +
 ...nchroma CoPE @U1 0.4 High Flow nozzle.json |  17 +
 ...anchroma PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Celestial @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Glow @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 +
 ...ma PLA Matte @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Neon @U1 0.4 High Flow nozzle.json |  17 +
 ...ma PLA Satin @U1 0.4 High Flow nozzle.json |  17 +
 ...oma PLA Silk @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 +
 ...A Temp Shift @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA UV Shift @U1 0.4 High Flow nozzle.json |  17 +
 ...yLite CosPLA @U1 0.4 High Flow nozzle.json |  17 +
 ...olyLite PETG @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...PolyLite PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...e PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...ite PLA Glow @U1 0.4 High Flow nozzle.json |  17 +
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 +
 ...ite PLA Neon @U1 0.4 High Flow nozzle.json |  17 +
 ...Lite PLA Pro @U1 0.4 High Flow nozzle.json |  17 +
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 +
 ...olyTerra PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 +
 ...lyTerra PLA+ @U1 0.4 High Flow nozzle.json |  17 +
 ...l PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...maker HT-PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...er HT-PLA-GF @U1 0.4 High Flow nozzle.json |  17 +
 ...lymaker PETG @U1 0.4 High Flow nozzle.json |  17 +
 ... PETG Galaxy @U1 0.4 High Flow nozzle.json |  17 +
 ...olymaker PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PLA Pro @U1 0.4 High Flow nozzle.json |  17 +
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 +
 ...k PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...h PLA Family @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker ABS @U1 0.4 High Flow nozzle.json |  50 ++
 ...r ABS Benchy @U1 0.4 High Flow nozzle.json |  20 +
 ...napmaker ASA @U1 0.4 High Flow nozzle.json |  50 ++
 ...port For PLA @U1 0.2 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.6 High Flow nozzle.json |  17 +
 ...port For PLA @U1 0.8 High Flow nozzle.json |  17 +
 ...pmaker PA-CF @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker PET @U1 0.4 High Flow nozzle.json |  17 +
 ...apmaker PETG @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PETG HF @U1 0.2 High Flow nozzle.json |  29 +
 ...aker PETG HF @U1 0.4 High Flow nozzle.json |  68 ++
 ...aker PETG HF @U1 0.6 High Flow nozzle.json |  29 +
 ...aker PETG HF @U1 0.8 High Flow nozzle.json |  29 +
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 +
 ...aker PETG-CF @U1 0.4 High Flow nozzle.json |  65 ++
 ...napmaker PLA @U1 0.4 High Flow nozzle.json |  17 +
 ...er PLA Basic @U1 0.4 High Flow nozzle.json |  17 +
 ...aker PLA Eco @U1 0.4 High Flow nozzle.json |  17 +
 ...ull Spectrum @U1 0.4 High Flow nozzle.json |  32 +
 ...ker PLA Glow @U1 0.4 High Flow nozzle.json |  26 +
 ...ker PLA Lite @U1 0.4 High Flow nozzle.json |  17 +
 ...er PLA Matte @U1 0.2 High Flow nozzle.json |  32 +
 ...er PLA Matte @U1 0.4 High Flow nozzle.json |  44 ++
 ...er PLA Matte @U1 0.6 High Flow nozzle.json |  32 +
 ...er PLA Matte @U1 0.8 High Flow nozzle.json |  32 +
 ...er PLA Metal @U1 0.4 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.2 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.4 High Flow nozzle.json |  23 +
 ...ker PLA Silk @U1 0.6 High Flow nozzle.json |  17 +
 ...ker PLA Silk @U1 0.8 High Flow nozzle.json |  17 +
 ...LA SnapSpeed @U1 0.2 High Flow nozzle.json |  23 +
 ...LA SnapSpeed @U1 0.4 High Flow nozzle.json |  26 +
 ...LA SnapSpeed @U1 0.6 High Flow nozzle.json |  23 +
 ...LA SnapSpeed @U1 0.8 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.4 High Flow nozzle.json |  20 +
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 +
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 +
 ...ker PLA Wood @U1 0.4 High Flow nozzle.json |  26 +
 ...ker PLA Wood @U1 0.6 High Flow nozzle.json |  23 +
 ...ker PLA Wood @U1 0.8 High Flow nozzle.json |  23 +
 ...maker PLA-CF @U1 0.4 High Flow nozzle.json |  38 +
 ...maker PLA-CF @U1 0.6 High Flow nozzle.json |  29 +
 ...maker PLA-CF @U1 0.8 High Flow nozzle.json |  29 +
 ...napmaker PVA @U1 0.4 High Flow nozzle.json |  26 +
 ...napmaker PVA @U1 0.6 High Flow nozzle.json |  20 +
 ...napmaker PVA @U1 0.8 High Flow nozzle.json |  20 +
 ...napmaker TPE @U1 0.4 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.4 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.6 High Flow nozzle.json |  17 +
 ...aker TPU 90A @U1 0.8 High Flow nozzle.json |  17 +
 ...aker TPU 95A @U1 0.4 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.4 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.6 High Flow nozzle.json |  17 +
 ...r TPU 95A HF @U1 0.8 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.4 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.6 High Flow nozzle.json |  17 +
 ...napmaker TPU @U1 0.8 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.4 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.6 High Flow nozzle.json |  17 +
 ...PU High-Flow @U1 0.8 High Flow nozzle.json |  17 +
 .../Snapmaker U1 (0.2 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.4 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.6 High Flow nozzle).json  |  18 +
 .../Snapmaker U1 (0.8 High Flow nozzle).json  |  18 +
 .../Snapmaker/machine/Snapmaker U1.json       |   2 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 +
 184 files changed, 4574 insertions(+), 2 deletions(-)
 create mode 100644 docs/HLSD/snapmaker-high-flow.md
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 create mode 100644 resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json

diff --git a/docs/HLSD/snapmaker-high-flow.md b/docs/HLSD/snapmaker-high-flow.md
new file mode 100644
index 0000000000..63806cbd83
--- /dev/null
+++ b/docs/HLSD/snapmaker-high-flow.md
@@ -0,0 +1,92 @@
+# Snapmaker U1 high-flow profiles
+
+The U1 provides separate High Flow printer presets for 0.2, 0.4, 0.6 and
+0.8 mm nozzles. Each describes four tools fitted with the same diameter and
+high-flow nozzle. They inherit the corresponding standard printer, retaining
+its model identity, geometry, motion limits and machine G-code. Existing
+standard and mixed-diameter presets retain their settings and names.
+
+Enable the High Flow variants under Snapmaker U1 in the printer setup, select
+the matching printer, and select a filament whose name includes that diameter
+and `High Flow nozzle`. PLA SnapSpeed is the default material for these
+printers. Dedicated HF process presets preserve diameter-specific extrusion
+widths and layer heights while overriding the four print speeds below.
+Separate HF filament presets keep higher ceilings out of standard-nozzle
+material settings.
+
+## Process speeds
+
+All 36 HF process presets, across 0.2, 0.4, 0.6 and 0.8 mm nozzles,
+use the same requested speeds from Snorca's 0.4 mm HF Standard process:
+
+| Setting | Speed (mm/s) |
+| --- | ---: |
+| Inner walls | 600 |
+| Outer walls | 500 |
+| Internal solid infill | 600 |
+| Sparse infill | 600 |
+
+Each HF process inherits its standard diameter/layer-height counterpart,
+so geometry, accelerations, first-layer speeds, bridges, overhangs and other
+settings remain diameter-specific. Standard printers retain their original
+process speeds. HF printers default to the corresponding HF process.
+Volumetric ceilings and machine motion limits still cap actual speeds.
+
+## Calibration sources
+
+Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main`
+commit `b1831e5dcb`, under `resources/profiles/Snapmaker/filament/`. That fork
+uses `filament_flow_support: ["standard", "high_flow"]` to interpret paired
+values. Here the high-flow column is translated into ordinary single-valued
+filament overrides; the fork-specific keys and its profile restructuring are
+not imported. Companion temperature and pressure-advance enable settings are
+included. Machine and filament G-code remain inherited from this branch.
+
+The 14 materials with upstream HF overrides are ABS, ASA, PETG HF, PETG Translucent, PETG-CF,
+PLA Full Spectrum, PLA Glow, PLA Matte, PLA Silk, PLA SnapSpeed, PLA
+Translucent, PLA Wood, PLA-CF and PVA. Upstream's renamed Support For PLA is
+not assumed equivalent to the local Breakaway formulation.
+
+## Volumetric ceiling
+
+All 141 HF filament presets explicitly set maximum volumetric speed to three
+times the fully inherited non-HF material value. Diameter-specific parents
+are used where available; Generic HF presets inherit the active Orca filament
+library's `@System` definitions, which are shared across diameters. The parent
+is recorded in `inherits`. This replaces both the upstream 0.4 mm HF ceiling
+and the earlier capped estimates.
+
+The ceiling is a user-selected limit, not a measured hardware capability.
+Other process and machine limits still apply. Future changes to a parent
+preset's volumetric speed require updating its HF child; the multiplier is
+materialized in JSON, not evaluated by the slicer.
+
+## Other material settings
+
+The 24 additional HF material presets are **estimated starting points**, not
+manufacturer calibrations. They exist only where this branch already has a
+matching material and diameter. In particular, this does not make filled
+materials available to a 0.2 mm nozzle when no such standard profile exists.
+
+For each material with a paired 0.4 mm standard/HF value:
+
+- Flow ratio and pressure advance use the 0.4 mm HF/standard ratio,
+  rounded to four decimal places. A zero standard value is not divided by.
+- Nozzle and initial-layer temperatures use the 0.4 mm HF-minus-standard
+  difference, added to the diameter's original temperature.
+- Pressure advance follows the source's enable setting when its value is
+  adjusted. Diameter-specific retraction and cooling settings are retained.
+- Missing, single-valued or `nil` comparisons leave the diameter's original
+  setting intact.
+
+For example, PLA SnapSpeed has standard volumetric limits of 2 mm^3/s at
+0.2 mm and 20 mm^3/s at 0.4, 0.6 and 0.8 mm. Its HF ceilings are therefore
+6 and 60 mm^3/s respectively. The other 103 HF material presets retain their
+standard parent's temperature, retraction, cooling and pressure-advance
+settings, changing only the volumetric ceiling and profile metadata.
+Each HF preset includes its baseline and ceiling in its filament notes.
+Tune the material settings for the actual nozzle, filament and temperature.
+
+The separate preset design requires no C++ changes or new profile keys. It
+does not provide independent standard/HF selection per tool within one printer
+preset; a mixed hardware setup needs its own calibrated user preset.
diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 06acef0b0e..d415c7dadd 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.15",
+	"version": "02.04.00.16",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -194,6 +194,10 @@
 			"name": "fdm_process_idex",
 			"sub_path": "process/fdm_process_idex.json"
 		},
+		{
+			"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
 		{
 			"name": "fdm_process_U1_0.06_nozzle_0.2",
 			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
@@ -614,6 +618,146 @@
 			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
 			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json"
 		},
+		{
+			"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
+		{
+			"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
 		{
 			"name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
 			"sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
@@ -756,6 +900,66 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Fiberon PPS-GF20 @Snapmaker U1 base",
 			"sub_path": "filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json"
@@ -1448,6 +1652,10 @@
 			"name": "Snapmaker PETG HF @U1 0.2 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json"
@@ -1760,6 +1968,30 @@
 			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker PLA-CF",
 			"sub_path": "filament/Snapmaker PLA-CF.json"
@@ -1840,6 +2072,30 @@
 			"name": "Snapmaker J1 TPU High-Flow",
 			"sub_path": "filament/Snapmaker J1 TPU High-Flow.json"
 		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker TPE @U1",
 			"sub_path": "filament/Snapmaker TPE @U1.json"
@@ -1860,6 +2116,174 @@
 			"name": "Snapmaker TPU",
 			"sub_path": "filament/Snapmaker TPU.json"
 		},
+		{
+			"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PET @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "PolyLite Dual PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json"
@@ -1868,6 +2292,114 @@
 			"name": "PolyLite J1 PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json"
 		},
+		{
+			"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker Dual PLA Eco",
 			"sub_path": "filament/Snapmaker Dual PLA Eco.json"
@@ -1904,6 +2436,50 @@
 			"name": "Snapmaker Breakaway Support @base",
 			"sub_path": "filament/Snapmaker Breakaway Support @base.json"
 		},
+		{
+			"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json"
+		},
 		{
 			"name": "Snapmaker Breakaway Support For PLA @U1",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json"
@@ -1920,6 +2496,138 @@
 			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
 		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.4 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.4 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.6 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.6 High Flow nozzle.json"
+		},
+		{
+			"name": "Generic TPU @U1 0.8 High Flow nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.8 High Flow nozzle.json"
+		},
 		{
 			"name": "PolyTerra J1 PLA",
 			"sub_path": "filament/Polymaker/PolyTerra J1 PLA.json"
@@ -2238,6 +2946,22 @@
 			"name": "Snapmaker Artisan (0.8 nozzle)",
 			"sub_path": "machine/Snapmaker Artisan (0.8 nozzle).json"
 		},
+		{
+			"name": "Snapmaker U1 (0.2 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.2 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.4 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.4 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.6 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.6 High Flow nozzle).json"
+		},
+		{
+			"name": "Snapmaker U1 (0.8 High Flow nozzle)",
+			"sub_path": "machine/Snapmaker U1 (0.8 High Flow nozzle).json"
+		},
 		{
 			"name": "Snapmaker A250 Dual BKit (0.2 nozzle)",
 			"sub_path": "machine/Snapmaker A250 Dual BKit (0.2 nozzle).json"
diff --git a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..794206a9ee
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon ASA-CF08 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "b1SjanapSsHClohQ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..40f28ecc21
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA12-CF10 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "NSFnZepHnBOgrNpc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..dd15942c75
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA6-CF20 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "qBf8pKCPs51wZX8h",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..a051be58f7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PA612-ESD @Snapmaker U1",
+	"from": "system",
+	"setting_id": "IE8AoNlftuKceK82",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fe4411ceba
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PETG-ESD @Snapmaker U1",
+	"from": "system",
+	"setting_id": "tBqwA6bzMZxINvhc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..a838e2fecc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
+	"inherits": "Fiberon PPS-GF20 @Snapmaker U1",
+	"from": "system",
+	"setting_id": "262BRaOSZLUidxzi",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..f224a6e5f8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "CyVMh4hZ5TrBb9Hl",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..2dbdd3a6d3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "AB6Lv3KHVfZ3F17I",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..67955d8cdc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "2wjxry91mFaUY5Kv",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..766f30a03f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "M5HDLQjQbdOYUkJc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..be8af80e2d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "hmfOc244iLZRjSxC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c13f72b1ed
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "QaYzwWA21nLkbeTd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..d0fed24d19
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "4FW7HsZg0GOFDyCr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..b0b75d0a17
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "DcwXjRYE21g1s7Gd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9ce1f45d0e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "xiruPdezF8sdAwJC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..6ecdd1894b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "edRC83pnDlkg8SYB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..95c852bdf8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "mwzFh7n5O4sSVbdq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"34.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..fa8f00af48
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "jOJzxhflMDXUSXP1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e564663de8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "u6ZVj3bEGhEScBAn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..e964a2d73c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "3rI0eWUn62OqztwD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..0576e76d5f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "Ca1ysi9BTj3SmRnf",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..2ab997f82f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "H45bzmFIJs2jcRxK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4a30c36707
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "rNAH84Cth3UXfID4",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..c26c6d1d75
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "1fXum9hyhX2CXp84",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..8350a79674
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "DEHdvXmDRZ4klSfG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..66e30d591e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "rgP9xBiJi6jtTGe6",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..960fbb7ae4
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "wKeFBUbXAh371HJc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..4749f73903
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "PoZUUozGNqKXDY6j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..ae13436c89
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "lSxapFINSYnT0jU5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4ea4fa5854
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "LumAEUgsSqWvQcnD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..6489d4c06e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "cbQkQEdl7ZZySWyb",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..d8a21dc0ff
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "w2R1GQrrewIaFigA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..af86177bce
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.4 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "a1T45jY9dw7cvXT9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..3bb797471f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.6 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "bHQSXsU5JQW91pkB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..88d4a980f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.8 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "FnByDNEkW6W6FR63",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e9de9fd91a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma CoPE @Snapmaker U1",
+	"from": "system",
+	"setting_id": "nBvDgnN3J4k3Uytq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b57e11d9ae
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "U5ss8ZIjm3fIz1Nq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..23888f197d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Celestial @Snapmaker U1",
+	"from": "system",
+	"setting_id": "R81OCOp3l7L8B8fJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7f77834c25
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "fS50UtV6RhVtB4uP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6becd42d5e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Glow @Snapmaker U1",
+	"from": "system",
+	"setting_id": "JCgz8jS9LuwdaBl1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e7c1666d92
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Luminous @Snapmaker U1",
+	"from": "system",
+	"setting_id": "K5a28HOfNIVohTxH",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7ed7b808a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Marble @Snapmaker U1",
+	"from": "system",
+	"setting_id": "iXtNnANcE9HjT8nn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..42fb688f20
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Matte @Snapmaker U1",
+	"from": "system",
+	"setting_id": "c9CmXJsBkThq39c6",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fb1c10a2bc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "KQ2nKfjxSAroQBJq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fa9087b701
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Neon @Snapmaker U1",
+	"from": "system",
+	"setting_id": "9fYw7eMrJBaA00at",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..970adef497
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Satin @Snapmaker U1",
+	"from": "system",
+	"setting_id": "PRlG1wqgh0KI7fuT",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..47f12bcfd8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Silk @Snapmaker U1",
+	"from": "system",
+	"setting_id": "EXLntLMjWCfwg2Wc",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d0a4cdee65
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Starlight @Snapmaker U1",
+	"from": "system",
+	"setting_id": "4QxRxMj60hcFxdJL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..fca32afa7b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Temp Shift @Snapmaker U1",
+	"from": "system",
+	"setting_id": "HDp1DlQLCfSKhaNx",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f6a4f0bfc3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "4ZTw1XHqwI7QjEfR",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..295bee1ea0
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
+	"inherits": "Panchroma PLA UV Shift @Snapmaker U1",
+	"from": "system",
+	"setting_id": "0pFMgeH7aowERZoU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6ed9b9543d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite CosPLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "iZqJvDu4xfgIBrpm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..0616e2fba3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PETG @Snapmaker U1",
+	"from": "system",
+	"setting_id": "fCNkJQO5skF4ZJcJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b7dee44938
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PETG Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "polhiSJb82UYZObE",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b337a5abc3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "AUKAVbKch9zjmuKG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d2669f41a3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "hncpZTWfBmfoUaCq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..748fe5e2c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Glow @Snapmaker U1",
+	"from": "system",
+	"setting_id": "DUuZDzjm3bmNBKSA",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..7c7c661948
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Luminous @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Mv5E1GpGrdHVF2Vs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..8aee23d539
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Neon @Snapmaker U1",
+	"from": "system",
+	"setting_id": "3HWUcpQIJsnxWDp7",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..0320f700c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Pro @Snapmaker U1",
+	"from": "system",
+	"setting_id": "mOax5GeAHVzqs4zL",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f3a964bebb
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Pro Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Vm5ydb09RSgfd1a8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..efcfd1518e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Starlight @Snapmaker U1",
+	"from": "system",
+	"setting_id": "urJVmseOC2Px1qIW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..06e0a310c7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "PolyLite PLA Translucent @Snapmaker U1",
+	"from": "system",
+	"setting_id": "jCgyYlatUD3jfQXS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e2c1f0aa26
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "MTZ6N0HHdSwkoysG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e9bf977e66
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA Marble @Snapmaker U1",
+	"from": "system",
+	"setting_id": "uQFqbcqaSTrlM52u",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..274caf962e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
+	"inherits": "PolyTerra PLA+ @Snapmaker U1",
+	"from": "system",
+	"setting_id": "ckmc2jbEBO6kAfXn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c36940b325
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker General PLA Family @U1",
+	"from": "system",
+	"setting_id": "lTLCaycZyEv7ATPu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..1bd1c95108
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker HT-PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "YB5Tzz4hghtQ6Iha",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..844fc2e463
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker HT-PLA-GF @Snapmaker U1",
+	"from": "system",
+	"setting_id": "XTfLaJ4pTpmfYOHK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d15778711a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PETG @Snapmaker U1",
+	"from": "system",
+	"setting_id": "7RmkAZ1MMkUK4UFe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..99eae4584a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PETG Galaxy @Snapmaker U1",
+	"from": "system",
+	"setting_id": "cBNSP4FfKq94BuWn",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..066c4e5d48
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA @Snapmaker U1",
+	"from": "system",
+	"setting_id": "N99CwtkZbVeE9ZoP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d1c63bc805
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA Pro @Snapmaker U1",
+	"from": "system",
+	"setting_id": "Npw7PdfMi3qIDuIY",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c7e944ea35
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker PLA Pro Metallic @Snapmaker U1",
+	"from": "system",
+	"setting_id": "YBy6gtPvOWIYchuS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c60d41257c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker Silk PLA Family @U1",
+	"from": "system",
+	"setting_id": "diMNPKgSPiNmv0EG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4a539098ca
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
+	"inherits": "Polymaker Tough PLA Family @U1",
+	"from": "system",
+	"setting_id": "tFHtV4suxKdRifWW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e3b53f36f3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,50 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ABS @U1",
+	"from": "system",
+	"setting_id": "23BA0fe1OoCgoHAe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_multitool_ramming_volume": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..244351878e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ABS Benchy @U1",
+	"from": "system",
+	"setting_id": "TI7PLhJrI5VSiYtg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"93"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 31 x 3 = 93 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"compatible_prints": [
+		"0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c5199df011
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,50 @@
+{
+	"type": "filament",
+	"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker ASA @U1",
+	"from": "system",
+	"setting_id": "UlxZs1Ey16Ic8TO8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"fan_max_speed": [
+		"25"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"20"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"280"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..3fff84663e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "Bzmt5I0LmEGEyWq3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"1.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 0.5 x 3 = 1.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..871d785016
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1",
+	"from": "system",
+	"setting_id": "2Wa2yfYIeZ0NfnD0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..77717f535a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "YRUG55NCp7gQtahJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..5db74011a3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "vtGhXaMJKZrd1kgP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..f6981095b8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PA-CF @U1",
+	"from": "system",
+	"setting_id": "SRbkfUJ8K9LunPYq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"24"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..854a02c1d1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PET @U1",
+	"from": "system",
+	"setting_id": "q0JpO9zk404c3d3B",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"20.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.8 x 3 = 20.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..780f8fee71
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG @U1",
+	"from": "system",
+	"setting_id": "T604QL6Utgbj4kLh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..91b263df44
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "ILQ3IFpogGbjluIN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..085debf589
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,68 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 base2",
+	"from": "system",
+	"setting_id": "dYZPyzUTqIxCaWMZ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"50"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_multitool_ramming_volume": [
+		"8"
+	],
+	"filament_retract_length_toolchange": [
+		"8"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ca27f67555
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "A4AAbNDIaCgXqiIk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..051bb8fbac
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PETG HF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "vDLX4xfsJUq4aWd8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.955"
+	],
+	"pressure_advance": [
+		"0.0525"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..44f49f7b2d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "jWQZ4FpmKof6eKP5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.2875"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"3"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..265b504a53
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "SSb1PYKLfJmn0RaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..aea3ffda1c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "8teECJZmuiAx3xzK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..7e66c59a2c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "jFuSDlP3daCftYGd",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4fb22fd2a5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,65 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PETG-CF @U1",
+	"from": "system",
+	"setting_id": "kTtK6gmRn2LVCgPv",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"20"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_flow_ratio": [
+		"1.01"
+	],
+	"filament_max_volumetric_speed": [
+		"19.2"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"30"
+	],
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"13"
+	],
+	"filament_multitool_ramming_volume": [
+		"0.5"
+	],
+	"filament_retract_length_toolchange": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"nozzle_temperature": [
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"pressure_advance": [
+		"0.028"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.4 x 3 = 19.2 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9e52e8d145
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA @U1",
+	"from": "system",
+	"setting_id": "Iw2vC9RsmNnXlyFC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"42"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 14 x 3 = 42 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..5b690deccc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Basic @U1",
+	"from": "system",
+	"setting_id": "6pP9yn7QPVxPrKlp",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..1fc7f3e6e5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Eco @U1",
+	"from": "system",
+	"setting_id": "yBXvtWTUvseiCC6p",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d9b39fcdb2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "Si1HKTz9ZSM8dIaU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_retract_length_toolchange": [
+		"5"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d6423ff5ff
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Glow @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "z33Hc87sYPmwPL5J",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"pressure_advance": [
+		"0.023"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..6f7f024b4c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Lite @U1",
+	"from": "system",
+	"setting_id": "siahKp21MtWd5vha",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..a0e558096c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "uJJlKJE6cP1VqAhi",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_flow_ratio": [
+		"1.0395"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..b4021aea6a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,44 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1",
+	"from": "system",
+	"setting_id": "a0eQeSmYLKJpPxo9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_flow_ratio": [
+		"0.99"
+	],
+	"filament_max_volumetric_speed": [
+		"66"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 22 x 3 = 66 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..daef1b37d5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "DfrCVTFg0FD7XVkf",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.9801"
+	],
+	"pressure_advance": [
+		"0.018"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..7f36cee705
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,32 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "jMrzguz4b18qMWem",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.9702"
+	],
+	"pressure_advance": [
+		"0.018"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c5c4b829a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Metal @U1",
+	"from": "system",
+	"setting_id": "01UP0AVB1B7TBi78",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..d110009d58
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "3YXcTZZ99lTaxy3j",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e05d313038
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1",
+	"from": "system",
+	"setting_id": "rpTq4sJFpmbdl0dy",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"80"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ad19b1abf3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "SYJSv3f1LWPnWTo1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..3856c5e5a2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Silk @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "GpTeZsC8ST8UvkKe",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"30"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..ef43a62cc1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "75HoJsG7nurT9m8o",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"6"
+	],
+	"pressure_advance": [
+		"0.24"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..9ab350a7ba
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1",
+	"from": "system",
+	"setting_id": "2S7b7VwKFkZuXTHB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"filament_multitool_ramming_flow": [
+		"40"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..ab657264ad
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "e3hivxxVP4MEauB0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..5e9be868b6
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "0ZOycCmSyLf9Zr3f",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	],
+	"pressure_advance": [
+		"0.0216"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
new file mode 100644
index 0000000000..b7b8357798
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+	"from": "system",
+	"setting_id": "atEZp48A9Ajefn5P",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.18"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1.6 x 3 = 4.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..67a5c77f4a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "OhPRQfEeCCBos1Xk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..29767b5045
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "UkjutA0LDsne1Kr4",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..6790f2a521
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "IEcagoFA1np00DZq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..95ef69bb13
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "7IGP2hVMK7ajiLuk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"filament_retract_length_toolchange": [
+		"6"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"pressure_advance": [
+		"0.024"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..71e3f69b98
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "8tH46AUyW4uua5QB",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.0134"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9bcde49fd5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA Wood @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "LW5RkXBTM4eE3eRK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"pressure_advance": [
+		"0.0067"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"60"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..c61a287426
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,38 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.4 nozzle",
+	"from": "system",
+	"setting_id": "ork4mVEyJBzXs2Xj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"additional_cooling_fan_speed": [
+		"100"
+	],
+	"filament_max_volumetric_speed": [
+		"45"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_retract_length_toolchange": [
+		"15"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..825567e128
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "c982QxKnlzVRADnm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..52100f6bbe
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,29 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PLA-CF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "4qXeMrTt9pZNCwEr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"54"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..e96baac97a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,26 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1",
+	"from": "system",
+	"setting_id": "NZwDYFscSMlZJusK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_notes": [
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 5 x 3 = 15 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..1fb7bc978a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "AO1DsQ9uGg1ivN8b",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.9506"
+	],
+	"filament_notes": [
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..cfdd941bc8
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker PVA @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "xy6MMfFlgvgrP0Xj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_flow_ratio": [
+		"0.9312"
+	],
+	"filament_notes": [
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..4b03c0e63d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPE @U1",
+	"from": "system",
+	"setting_id": "wLR0Jg5KEPd18zik",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"21.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.2 x 3 = 21.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..130bba2045
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1",
+	"from": "system",
+	"setting_id": "xAMUl2DDEuMrrzAs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..d999f651f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "URpA1Br6ZxbbV0IF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..b49d1d3a09
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU 90A @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "nECpLUQc8O9JE4em",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"10.5"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.5 x 3 = 10.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..55ba8da2db
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A @U1",
+	"from": "system",
+	"setting_id": "Ywz3Y08u16nlPSuD",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"9.6"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..461dcf6e69
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1",
+	"from": "system",
+	"setting_id": "hVOeZYtFdD5f9n8N",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"27"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 9 x 3 = 27 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..416cfe0097
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+	"from": "system",
+	"setting_id": "gkRhqrvJIZh1o3wJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"36"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9971dabbf2
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+	"from": "system",
+	"setting_id": "ILlLnES7BQLAKxnH",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"48"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..48d709b12d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "fzFdqg3bAFNCOB7S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..8af4584d0a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "qABR1pUxRSY6jSAk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..6009f90585
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU @U1",
+	"from": "system",
+	"setting_id": "fgWdX41gAzkDoAW5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"8.4"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
new file mode 100644
index 0000000000..d34d28c7b5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "UFqQnkKICuivJWiW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
new file mode 100644
index 0000000000..34cf3796f5
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "E5Y9PFB8elCm2yGh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
new file mode 100644
index 0000000000..9453bf939b
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json	
@@ -0,0 +1,17 @@
+{
+	"type": "filament",
+	"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
+	"inherits": "Snapmaker TPU High-Flow @U1",
+	"from": "system",
+	"setting_id": "FXqeu1WlfeqwdbrM",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_max_volumetric_speed": [
+		"22.8"
+	],
+	"filament_notes": [
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..9afb250476
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "rypfKOLmPmXpR3Z9",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.2 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle"
+	],
+	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..f8b8d44e10
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "YVXcn9a2pyGfl8wo",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.4 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle"
+	],
+	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..53c0d682cd
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "7Nqiw8MQIWaQqB1R",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.6 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle"
+	],
+	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..ded207ffbf
--- /dev/null
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,18 @@
+{
+	"type": "machine",
+	"name": "Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "aTs5dXyBbXItUEeS",
+	"instantiation": "true",
+	"printer_model": "Snapmaker U1",
+	"printer_variant": "0.8 High Flow",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle"
+	],
+	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)"
+}
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
index 96eb53f81a..0b5f8c8a93 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -8,5 +8,5 @@
 	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
 	"bed_model": "Snapmaker U1_bed.stl",
 	"bed_texture": "Snapmaker U1_texture.svg",
-	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8"
+	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow"
 }
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..3deab05cdd
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "LFjXyYMCx6Oy12PQ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..f48dfa5c3b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "nMJ1UXr4uyWr62Nx",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..8fd4c1cbe7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "iyzOhKe7WcJvxmQu",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..b9e42b5d79
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "CaOHxJpx23e32eZm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..a7141e48f1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "3Jsj1rKIzF9dhszS",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..c81c177341
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "Dk5x3oI8wrO1SYDF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..ab2f3430c6
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "AEdUWWIQuuIvPX48",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..9dbcbb12da
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "k5ltb2fjXfHavuJl",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..77bb9d98a9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "68ArVT2y9MR8cLZ1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..e052a9e517
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "m9GIExQJEdmIA0t2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..dc46dd6014
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "VYRDtZXoZWqcHBJP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
new file mode 100644
index 0000000000..08451b8fa7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"inherits": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
+	"from": "system",
+	"setting_id": "NPQCD2bScfCwZAGP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..cbf3b13b75
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "Wkl0CFo4qXv79E1W",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..9ed96478f2
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "xGaLQMk52ZD5ZqJh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..9410d42ef5
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "aW5X8f9lb5haKlWj",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..1a680858b1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "g8JVHkdQOCWRZZf5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..de45cf42f9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "5EHp34T55kiTtt68",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..dbaa4cac78
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "l3KpKbqxUGKTjO0t",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..cc1c08848c
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "jTYxPrkfNAXXeElO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..d305323789
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "o2uNeeRv8JNXAuD0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..6bbd70ca8b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "rLdRXBKLSDdjsSs9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..ea99859bc7
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "cZfx1x9K6oYUG6nK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..1072a08efa
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "PvF43C7HiDhd7BKg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..7844a38bf1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "FAVs0dNRa86OWdzy",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..bc50c410c5
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "21Yht5aHJVG0XebG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
new file mode 100644
index 0000000000..bd58038ed9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
+	"inherits": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
+	"from": "system",
+	"setting_id": "ofB4cQcZJ2Lkze83",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..00494a3516
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "K3aD6VMSmWStekaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..46de759eb1
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "G8jjRPwut6AkuW7w",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..40e31b320f
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "4S1DO4sXQX2RXSjC",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..c74cf8b309
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "6k3IeQoysYKUxTxG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..aab911513d
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "4c5vbxTAK6TVyTpg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..3d3a341e2b
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "vWhACedmOjulskG0",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..1981348438
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "YEOmDIj6IFBHwvTr",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
new file mode 100644
index 0000000000..cca40610a9
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"inherits": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
+	"from": "system",
+	"setting_id": "kXJPwKEtZ6kSTvcm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..b976586099
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "BTuUnaHxKcjQlOv9",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
new file mode 100644
index 0000000000..091c301acf
--- /dev/null
+++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -0,0 +1,23 @@
+{
+	"type": "process",
+	"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"inherits": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
+	"from": "system",
+	"setting_id": "VrtVj7ZWFPegxXaW",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"inner_wall_speed": [
+		"600"
+	],
+	"outer_wall_speed": [
+		"500"
+	],
+	"internal_solid_infill_speed": [
+		"600"
+	],
+	"sparse_infill_speed": [
+		"600"
+	]
+}

From e9b9a79815bc94fd7aaba506f2de73f000d14f6c Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Thu, 17 Sep 2026 08:46:06 -0400
Subject: [PATCH 02/13] Configure Snapmaker U1 purifier from filament softening
 temperature

Select purifier mode in U1 start G-code using the existing min_vitrification_temperature placeholder. Cover standard, high-flow and mixed-nozzle profiles without new slicer settings or C++ changes. Document the thresholds; retain the branch-wide Snapmaker version bump.

Co-authored-by: Codex <noreply@openai.com>
---
 docs/HLSD/snapmaker-high-flow.md                 | 16 ++++++++++++++++
 .../machine/Snapmaker U1 (0.2 nozzle).json       |  2 +-
 .../machine/Snapmaker U1 (0.4 nozzle).json       |  2 +-
 .../machine/Snapmaker U1 (0.6 nozzle).json       |  2 +-
 .../machine/Snapmaker U1 (0.8 nozzle).json       |  2 +-
 resources/profiles/Snapmaker/machine/fdm_U1.json |  2 +-
 6 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/docs/HLSD/snapmaker-high-flow.md b/docs/HLSD/snapmaker-high-flow.md
index 63806cbd83..61da074e97 100644
--- a/docs/HLSD/snapmaker-high-flow.md
+++ b/docs/HLSD/snapmaker-high-flow.md
@@ -32,6 +32,22 @@ settings remain diameter-specific. Standard printers retain their original
 process speeds. HF printers default to the corresponding HF process.
 Volumetric ceilings and machine motion limits still cap actual speeds.
 
+## Chamber and purifier control
+
+All U1 start sequences, including the mixed-diameter and inherited HF
+profiles, issue `SET_PURIFIER_MODE` automatically. The start G-code checks the existing
+`min_vitrification_temperature` placeholder, the lowest Softening temperature
+(`temperature_vitrification`) among the filaments actually used on the plate:
+at or below 50 C selects strong cooling, above 50 C through 70 C selects weak
+cooling, and above 70 C selects keep-warm mode. Unused materials do not affect
+the result. There is no extra filament flag or enable setting.
+
+The firmware parameters match Snorca: strong cooling uses mode 1, target
+42 C, alarm 45 C, fan 0.6 and no delayed shutdown; weak cooling uses mode 3,
+target 0 C, fan 0.6 and a 600-second delay; keep-warm uses mode 3, target
+45 C, fan 0.6 and a 600-second delay. Mode selection happens once at print
+start and depends on the accuracy of each filament's softening temperature.
+
 ## Calibration sources
 
 Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main`
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json
index 183e125c73..0eb1746895 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
@@ -47,7 +47,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.14",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json
index 6d2ec2cfe6..f30fbe9813 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
@@ -47,7 +47,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.32",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json
index a6cb0d0bd3..0067f3d087 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
@@ -47,7 +47,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.42",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json
index ef4da1a516..390cc54281 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
@@ -47,7 +47,7 @@
 		"20",
 		"12"
 	],
-	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+	"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else}                                                                                                                                                                                                               \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
 	"machine_tool_change_time": "5",
 	"max_layer_height": [
 		"0.56",
diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json
index 0b3d89a303..85a94df1d8 100644
--- a/resources/profiles/Snapmaker/machine/fdm_U1.json
+++ b/resources/profiles/Snapmaker/machine/fdm_U1.json
@@ -179,7 +179,7 @@
 	"purge_in_prime_tower": "0",
 	"machine_pause_gcode": "M601",
 	"change_filament_gcode": "",
-	"machine_start_gcode": "PRINT_START  TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n",
+	"machine_start_gcode": "PRINT_START  TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n",
 	"scan_first_layer": "0",
 	"nozzle_type": "undefine",
 	"auxiliary_fan": "0",

From 19277f44ad8d01d8a81a36940791ed9bb1425dd6 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Thu, 17 Sep 2026 09:08:16 -0400
Subject: [PATCH 03/13] HLSD seems too official for this

---
 docs/HLSD/snapmaker-high-flow.md              | 108 ------------------
 ...ron ASA-CF08 @U1 0.4 High Flow nozzle.json |   4 +-
 ...on PA12-CF10 @U1 0.4 High Flow nozzle.json |   4 +-
 ...ron PA6-CF20 @U1 0.4 High Flow nozzle.json |   4 +-
 ...on PA612-ESD @U1 0.4 High Flow nozzle.json |   4 +-
 ...ron PETG-ESD @U1 0.4 High Flow nozzle.json |   4 +-
 ...ron PPS-GF20 @U1 0.4 High Flow nozzle.json |   4 +-
 ...Generic PETG @U1 0.2 High Flow nozzle.json |   4 +-
 ...Generic PETG @U1 0.4 High Flow nozzle.json |   4 +-
 ...Generic PETG @U1 0.6 High Flow nozzle.json |   4 +-
 ...Generic PETG @U1 0.8 High Flow nozzle.json |   4 +-
 ...eric PETG HF @U1 0.2 High Flow nozzle.json |   4 +-
 ...eric PETG HF @U1 0.4 High Flow nozzle.json |   4 +-
 ...eric PETG HF @U1 0.6 High Flow nozzle.json |   4 +-
 ...eric PETG HF @U1 0.8 High Flow nozzle.json |   4 +-
 ...eric PETG-CF @U1 0.4 High Flow nozzle.json |   4 +-
 ...eric PETG-CF @U1 0.6 High Flow nozzle.json |   4 +-
 ...eric PETG-CF @U1 0.8 High Flow nozzle.json |   4 +-
 .../Generic PLA @U1 0.2 High Flow nozzle.json |   4 +-
 .../Generic PLA @U1 0.4 High Flow nozzle.json |   4 +-
 .../Generic PLA @U1 0.6 High Flow nozzle.json |   4 +-
 .../Generic PLA @U1 0.8 High Flow nozzle.json |   4 +-
 ...A High Speed @U1 0.2 High Flow nozzle.json |   4 +-
 ...A High Speed @U1 0.4 High Flow nozzle.json |   4 +-
 ...A High Speed @U1 0.6 High Flow nozzle.json |   4 +-
 ...A High Speed @U1 0.8 High Flow nozzle.json |   4 +-
 ...ric PLA Silk @U1 0.2 High Flow nozzle.json |   4 +-
 ...ric PLA Silk @U1 0.4 High Flow nozzle.json |   4 +-
 ...ric PLA Silk @U1 0.6 High Flow nozzle.json |   4 +-
 ...ric PLA Silk @U1 0.8 High Flow nozzle.json |   4 +-
 ...neric PLA-CF @U1 0.4 High Flow nozzle.json |   4 +-
 ...neric PLA-CF @U1 0.6 High Flow nozzle.json |   4 +-
 ...neric PLA-CF @U1 0.8 High Flow nozzle.json |   4 +-
 .../Generic TPU @U1 0.4 High Flow nozzle.json |   4 +-
 .../Generic TPU @U1 0.6 High Flow nozzle.json |   4 +-
 .../Generic TPU @U1 0.8 High Flow nozzle.json |   4 +-
 ...nchroma CoPE @U1 0.4 High Flow nozzle.json |   4 +-
 ...anchroma PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...LA Celestial @U1 0.4 High Flow nozzle.json |   4 +-
 ...a PLA Galaxy @U1 0.4 High Flow nozzle.json |   4 +-
 ...oma PLA Glow @U1 0.4 High Flow nozzle.json |   4 +-
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |   4 +-
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |   4 +-
 ...ma PLA Matte @U1 0.4 High Flow nozzle.json |   4 +-
 ...PLA Metallic @U1 0.4 High Flow nozzle.json |   4 +-
 ...oma PLA Neon @U1 0.4 High Flow nozzle.json |   4 +-
 ...ma PLA Satin @U1 0.4 High Flow nozzle.json |   4 +-
 ...oma PLA Silk @U1 0.4 High Flow nozzle.json |   4 +-
 ...LA Starlight @U1 0.4 High Flow nozzle.json |   4 +-
 ...A Temp Shift @U1 0.4 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |   4 +-
 ...PLA UV Shift @U1 0.4 High Flow nozzle.json |   4 +-
 ...yLite CosPLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...olyLite PETG @U1 0.4 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |   4 +-
 ...PolyLite PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...e PLA Galaxy @U1 0.4 High Flow nozzle.json |   4 +-
 ...ite PLA Glow @U1 0.4 High Flow nozzle.json |   4 +-
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |   4 +-
 ...ite PLA Neon @U1 0.4 High Flow nozzle.json |   4 +-
 ...Lite PLA Pro @U1 0.4 High Flow nozzle.json |   4 +-
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |   4 +-
 ...LA Starlight @U1 0.4 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |   4 +-
 ...olyTerra PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |   4 +-
 ...lyTerra PLA+ @U1 0.4 High Flow nozzle.json |   4 +-
 ...l PLA Family @U1 0.4 High Flow nozzle.json |   4 +-
 ...maker HT-PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...er HT-PLA-GF @U1 0.4 High Flow nozzle.json |   4 +-
 ...lymaker PETG @U1 0.4 High Flow nozzle.json |   4 +-
 ... PETG Galaxy @U1 0.4 High Flow nozzle.json |   4 +-
 ...olymaker PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker PLA Pro @U1 0.4 High Flow nozzle.json |   4 +-
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |   4 +-
 ...k PLA Family @U1 0.4 High Flow nozzle.json |   4 +-
 ...h PLA Family @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker ABS @U1 0.4 High Flow nozzle.json |   4 +-
 ...r ABS Benchy @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker ASA @U1 0.4 High Flow nozzle.json |   4 +-
 ...port For PLA @U1 0.2 High Flow nozzle.json |   4 +-
 ...port For PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...port For PLA @U1 0.6 High Flow nozzle.json |   4 +-
 ...port For PLA @U1 0.8 High Flow nozzle.json |   4 +-
 ...pmaker PA-CF @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker PET @U1 0.4 High Flow nozzle.json |   4 +-
 ...apmaker PETG @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker PETG HF @U1 0.2 High Flow nozzle.json |   4 +-
 ...aker PETG HF @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker PETG HF @U1 0.6 High Flow nozzle.json |   4 +-
 ...aker PETG HF @U1 0.8 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.2 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.6 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.8 High Flow nozzle.json |   4 +-
 ...aker PETG-CF @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker PLA @U1 0.4 High Flow nozzle.json |   4 +-
 ...er PLA Basic @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker PLA Eco @U1 0.4 High Flow nozzle.json |   4 +-
 ...ull Spectrum @U1 0.4 High Flow nozzle.json |   4 +-
 ...ker PLA Glow @U1 0.4 High Flow nozzle.json |   4 +-
 ...ker PLA Lite @U1 0.4 High Flow nozzle.json |   4 +-
 ...er PLA Matte @U1 0.2 High Flow nozzle.json |   4 +-
 ...er PLA Matte @U1 0.4 High Flow nozzle.json |   4 +-
 ...er PLA Matte @U1 0.6 High Flow nozzle.json |   4 +-
 ...er PLA Matte @U1 0.8 High Flow nozzle.json |   4 +-
 ...er PLA Metal @U1 0.4 High Flow nozzle.json |   4 +-
 ...ker PLA Silk @U1 0.2 High Flow nozzle.json |   4 +-
 ...ker PLA Silk @U1 0.4 High Flow nozzle.json |   4 +-
 ...ker PLA Silk @U1 0.6 High Flow nozzle.json |   4 +-
 ...ker PLA Silk @U1 0.8 High Flow nozzle.json |   4 +-
 ...LA SnapSpeed @U1 0.2 High Flow nozzle.json |   4 +-
 ...LA SnapSpeed @U1 0.4 High Flow nozzle.json |   4 +-
 ...LA SnapSpeed @U1 0.6 High Flow nozzle.json |   4 +-
 ...LA SnapSpeed @U1 0.8 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.2 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.6 High Flow nozzle.json |   4 +-
 ... Translucent @U1 0.8 High Flow nozzle.json |   4 +-
 ...ker PLA Wood @U1 0.4 High Flow nozzle.json |   4 +-
 ...ker PLA Wood @U1 0.6 High Flow nozzle.json |   4 +-
 ...ker PLA Wood @U1 0.8 High Flow nozzle.json |   4 +-
 ...maker PLA-CF @U1 0.4 High Flow nozzle.json |   4 +-
 ...maker PLA-CF @U1 0.6 High Flow nozzle.json |   4 +-
 ...maker PLA-CF @U1 0.8 High Flow nozzle.json |   4 +-
 ...napmaker PVA @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker PVA @U1 0.6 High Flow nozzle.json |   4 +-
 ...napmaker PVA @U1 0.8 High Flow nozzle.json |   4 +-
 ...napmaker TPE @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker TPU 90A @U1 0.4 High Flow nozzle.json |   4 +-
 ...aker TPU 90A @U1 0.6 High Flow nozzle.json |   4 +-
 ...aker TPU 90A @U1 0.8 High Flow nozzle.json |   4 +-
 ...aker TPU 95A @U1 0.4 High Flow nozzle.json |   4 +-
 ...r TPU 95A HF @U1 0.4 High Flow nozzle.json |   4 +-
 ...r TPU 95A HF @U1 0.6 High Flow nozzle.json |   4 +-
 ...r TPU 95A HF @U1 0.8 High Flow nozzle.json |   4 +-
 ...napmaker TPU @U1 0.4 High Flow nozzle.json |   4 +-
 ...napmaker TPU @U1 0.6 High Flow nozzle.json |   4 +-
 ...napmaker TPU @U1 0.8 High Flow nozzle.json |   4 +-
 ...PU High-Flow @U1 0.4 High Flow nozzle.json |   4 +-
 ...PU High-Flow @U1 0.6 High Flow nozzle.json |   4 +-
 ...PU High-Flow @U1 0.8 High Flow nozzle.json |   4 +-
 142 files changed, 282 insertions(+), 390 deletions(-)
 delete mode 100644 docs/HLSD/snapmaker-high-flow.md

diff --git a/docs/HLSD/snapmaker-high-flow.md b/docs/HLSD/snapmaker-high-flow.md
deleted file mode 100644
index 61da074e97..0000000000
--- a/docs/HLSD/snapmaker-high-flow.md
+++ /dev/null
@@ -1,108 +0,0 @@
-# Snapmaker U1 high-flow profiles
-
-The U1 provides separate High Flow printer presets for 0.2, 0.4, 0.6 and
-0.8 mm nozzles. Each describes four tools fitted with the same diameter and
-high-flow nozzle. They inherit the corresponding standard printer, retaining
-its model identity, geometry, motion limits and machine G-code. Existing
-standard and mixed-diameter presets retain their settings and names.
-
-Enable the High Flow variants under Snapmaker U1 in the printer setup, select
-the matching printer, and select a filament whose name includes that diameter
-and `High Flow nozzle`. PLA SnapSpeed is the default material for these
-printers. Dedicated HF process presets preserve diameter-specific extrusion
-widths and layer heights while overriding the four print speeds below.
-Separate HF filament presets keep higher ceilings out of standard-nozzle
-material settings.
-
-## Process speeds
-
-All 36 HF process presets, across 0.2, 0.4, 0.6 and 0.8 mm nozzles,
-use the same requested speeds from Snorca's 0.4 mm HF Standard process:
-
-| Setting | Speed (mm/s) |
-| --- | ---: |
-| Inner walls | 600 |
-| Outer walls | 500 |
-| Internal solid infill | 600 |
-| Sparse infill | 600 |
-
-Each HF process inherits its standard diameter/layer-height counterpart,
-so geometry, accelerations, first-layer speeds, bridges, overhangs and other
-settings remain diameter-specific. Standard printers retain their original
-process speeds. HF printers default to the corresponding HF process.
-Volumetric ceilings and machine motion limits still cap actual speeds.
-
-## Chamber and purifier control
-
-All U1 start sequences, including the mixed-diameter and inherited HF
-profiles, issue `SET_PURIFIER_MODE` automatically. The start G-code checks the existing
-`min_vitrification_temperature` placeholder, the lowest Softening temperature
-(`temperature_vitrification`) among the filaments actually used on the plate:
-at or below 50 C selects strong cooling, above 50 C through 70 C selects weak
-cooling, and above 70 C selects keep-warm mode. Unused materials do not affect
-the result. There is no extra filament flag or enable setting.
-
-The firmware parameters match Snorca: strong cooling uses mode 1, target
-42 C, alarm 45 C, fan 0.6 and no delayed shutdown; weak cooling uses mode 3,
-target 0 C, fan 0.6 and a 600-second delay; keep-warm uses mode 3, target
-45 C, fan 0.6 and a 600-second delay. Mode selection happens once at print
-start and depends on the accuracy of each filament's softening temperature.
-
-## Calibration sources
-
-Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main`
-commit `b1831e5dcb`, under `resources/profiles/Snapmaker/filament/`. That fork
-uses `filament_flow_support: ["standard", "high_flow"]` to interpret paired
-values. Here the high-flow column is translated into ordinary single-valued
-filament overrides; the fork-specific keys and its profile restructuring are
-not imported. Companion temperature and pressure-advance enable settings are
-included. Machine and filament G-code remain inherited from this branch.
-
-The 14 materials with upstream HF overrides are ABS, ASA, PETG HF, PETG Translucent, PETG-CF,
-PLA Full Spectrum, PLA Glow, PLA Matte, PLA Silk, PLA SnapSpeed, PLA
-Translucent, PLA Wood, PLA-CF and PVA. Upstream's renamed Support For PLA is
-not assumed equivalent to the local Breakaway formulation.
-
-## Volumetric ceiling
-
-All 141 HF filament presets explicitly set maximum volumetric speed to three
-times the fully inherited non-HF material value. Diameter-specific parents
-are used where available; Generic HF presets inherit the active Orca filament
-library's `@System` definitions, which are shared across diameters. The parent
-is recorded in `inherits`. This replaces both the upstream 0.4 mm HF ceiling
-and the earlier capped estimates.
-
-The ceiling is a user-selected limit, not a measured hardware capability.
-Other process and machine limits still apply. Future changes to a parent
-preset's volumetric speed require updating its HF child; the multiplier is
-materialized in JSON, not evaluated by the slicer.
-
-## Other material settings
-
-The 24 additional HF material presets are **estimated starting points**, not
-manufacturer calibrations. They exist only where this branch already has a
-matching material and diameter. In particular, this does not make filled
-materials available to a 0.2 mm nozzle when no such standard profile exists.
-
-For each material with a paired 0.4 mm standard/HF value:
-
-- Flow ratio and pressure advance use the 0.4 mm HF/standard ratio,
-  rounded to four decimal places. A zero standard value is not divided by.
-- Nozzle and initial-layer temperatures use the 0.4 mm HF-minus-standard
-  difference, added to the diameter's original temperature.
-- Pressure advance follows the source's enable setting when its value is
-  adjusted. Diameter-specific retraction and cooling settings are retained.
-- Missing, single-valued or `nil` comparisons leave the diameter's original
-  setting intact.
-
-For example, PLA SnapSpeed has standard volumetric limits of 2 mm^3/s at
-0.2 mm and 20 mm^3/s at 0.4, 0.6 and 0.8 mm. Its HF ceilings are therefore
-6 and 60 mm^3/s respectively. The other 103 HF material presets retain their
-standard parent's temperature, retraction, cooling and pressure-advance
-settings, changing only the volumetric ceiling and profile metadata.
-Each HF preset includes its baseline and ceiling in its filament notes.
-Tune the material settings for the actual nozzle, filament and temperature.
-
-The separate preset design requires no C++ changes or new profile keys. It
-does not provide independent standard/HF selection per tool within one printer
-preset; a mixed hardware setup needs its own calibrated user preset.
diff --git a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
index 794206a9ee..dc60a89080 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon ASA-CF08 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
index 40f28ecc21..ca3a3615ec 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA12-CF10 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
index dd15942c75..fdad376102 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA6-CF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
index a051be58f7..bfb433d9d8 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA612-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
index fe4411ceba..0712b95763 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Fiberon PETG-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
index a838e2fecc..ae976bbde1 100644
--- a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PPS-GF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
index f224a6e5f8..0f3180747b 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"1"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
index 2dbdd3a6d3..dc29505cd2 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
index 67955d8cdc..7f48563c75 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
index 766f30a03f..e614e63e6b 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
index be8af80e2d..838c6f27c8 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"1"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
index c13f72b1ed..15d0b70f30 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
index d0fed24d19..23977d0239 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
index b0b75d0a17..3a4c3ba6ad 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
index 9ce1f45d0e..55dd20fa73 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"34.5"
+		"11"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
index 6ecdd1894b..98a3e9f0ca 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"34.5"
+		"11.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
index 95c852bdf8..c9fb8439ec 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"34.5"
+		"11.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
index fa8f00af48..f4c562111c 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"1.6"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
index e564663de8..3042cc6942 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
index e964a2d73c..05b104ad69 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
index 0576e76d5f..b4962c3d93 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
index 2ab997f82f..b092b41fd8 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
index 4a30c36707..3cc254811a 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
index c26c6d1d75..68520dfb6e 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
index 8350a79674..7941e63d2c 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
index 66e30d591e..7103c2aebe 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
index 960fbb7ae4..cca504c6d5 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
index 4749f73903..3ba3f5e0b5 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
index ae13436c89..dcc0bc8007 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
index 4ea4fa5854..acb4001897 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
index 6489d4c06e..e0b91c6b08 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
index d8a21dc0ff..5e33595604 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
index af86177bce..0e28741d4b 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
index 3bb797471f..8a1e5c04ff 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
index 88d4a980f1..34adb046aa 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
index e9de9fd91a..d0bccc66e1 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma CoPE @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
index b57e11d9ae..783dea1078 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
index 23888f197d..9b0df8dd59 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Celestial @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
index 7f77834c25..4eb0005363 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
index 6becd42d5e..57f7e80c9c 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
index e7c1666d92..e892c5c2f7 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
index 7ed7b808a2..d9f9f9c419 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
index 42fb688f20..145f766ce9 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Matte @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
index fb1c10a2bc..b54b291bdd 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
index fa9087b701..da0389bdc7 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
index 970adef497..2f705909e8 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Satin @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
index 47f12bcfd8..9553afb7e3 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Panchroma PLA Silk @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
index d0a4cdee65..4d8310a6c3 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
index fca32afa7b..5cefff25f1 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Temp Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
index f6a4f0bfc3..45102a7a19 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
index 295bee1ea0..d252f70921 100644
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA UV Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
index 6ed9b9543d..7af0ba9b3a 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite CosPLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
index 0616e2fba3..cc4623a7cd 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"7.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
index b7dee44938..f0b3f91f49 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.5"
+		"7.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
index b337a5abc3..3d3a9bef72 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
index d2669f41a3..3836e62d5e 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
index 748fe5e2c6..f73ede7b25 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
index 7c7c661948..2ab15e9fd2 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
index 8aee23d539..51d1010112 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
index 0320f700c6..9b250dfb98 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
index f3a964bebb..fbfb23ac4b 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
index efcfd1518e..e1502b10de 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
index 06e0a310c7..c44e1bb633 100644
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
index e2c1f0aa26..454b86d711 100644
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
index e9bf977e66..4bfbd99b94 100644
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
index 274caf962e..20cb320ec8 100644
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA+ @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
index c36940b325..2c0f8a6936 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
index 1bd1c95108..d6d336c3e0 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
index 844fc2e463..0d76705426 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA-GF @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
index d15778711a..f2b8f17ca2 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
index 99eae4584a..afc5f6a361 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
index 066c4e5d48..b411e8960a 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Polymaker PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
index d1c63bc805..0c98d9a7ee 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
index c7e944ea35..b027a554b2 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
index c60d41257c..c51dce398d 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
index 4a539098ca..724ab002c2 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
index e3b53f36f3..0de983e448 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
@@ -18,7 +18,7 @@
 		"10"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"22"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -45,6 +45,6 @@
 		"280"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
index 244351878e..f8c91285b6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json	
@@ -9,10 +9,10 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"93"
+		"31"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 31 x 3 = 93 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 31 mm^3/s, from local standard fallback preset Snapmaker ABS Benchy @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"compatible_prints": [
 		"0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
index c5199df011..212e9b1044 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
@@ -18,7 +18,7 @@
 		"10"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"22"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -45,6 +45,6 @@
 		"0.02"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
index 3fff84663e..9fa11d6101 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"1.5"
+		"0.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 0.5 x 3 = 1.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 0.5 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.2 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
index 871d785016..9d8922829a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
index 77717f535a..63e218c554 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.6 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
index 5db74011a3..dce415fefe 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.8 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
index f6981095b8..c097954185 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"24"
+		"8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Snapmaker PA-CF @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
index 854a02c1d1..a7c30b3000 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"20.4"
+		"6.8"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.8 x 3 = 20.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 6.8 mm^3/s, from local standard fallback preset Snapmaker PET @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
index 780f8fee71..bf18d6fb9d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"10"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10 mm^3/s, from local standard fallback preset Snapmaker PETG @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
index 91b263df44..6fded62f26 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"3"
+		"2"
 	],
 	"filament_flow_ratio": [
 		"0.955"
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
index 085debf589..5b562ef932 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
@@ -21,7 +21,7 @@
 		"0.955"
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"30"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"50"
@@ -63,6 +63,6 @@
 		"0.035"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
index ca27f67555..1bb8fca6dd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_flow_ratio": [
 		"0.955"
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
index 051bb8fbac..b95ecd4911 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_flow_ratio": [
 		"0.955"
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
index 44f49f7b2d..eec95f80bf 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"3"
+		"1"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
index 265b504a53..1a17739f69 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"0.05"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"10"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
index aea3ffda1c..0fceb6ef5a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"16"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
index 7e66c59a2c..26749c6ecf 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"16"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
index 4fb22fd2a5..6c06c1c4bf 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -24,7 +24,7 @@
 		"1.01"
 	],
 	"filament_max_volumetric_speed": [
-		"19.2"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"30"
@@ -60,6 +60,6 @@
 		"0.028"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.4 x 3 = 19.2 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
index 9e52e8d145..b0e13a4f79 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"42"
+		"14"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 14 x 3 = 42 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 14 mm^3/s, from local standard fallback preset Snapmaker PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
index 5b690deccc..3d2e16dc7f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
index 1fc7f3e6e5..100d225a88 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker PLA Eco @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
index d9b39fcdb2..1a63ff75cc 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
@@ -24,9 +24,9 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
index d6423ff5ff..b2f4efcfb1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -15,12 +15,12 @@
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"18"
 	],
 	"pressure_advance": [
 		"0.023"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
index 6f7f024b4c..f281f8795b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Snapmaker PLA Lite @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
index a0e558096c..3b2e3541c4 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"6"
+		"2"
 	],
 	"filament_flow_ratio": [
 		"1.0395"
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
index b4021aea6a..45bf88f8b5 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -18,7 +18,7 @@
 		"0.99"
 	],
 	"filament_max_volumetric_speed": [
-		"66"
+		"40"
 	],
 	"filament_retraction_length": [
 		"1"
@@ -39,6 +39,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 22 x 3 = 66 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
index daef1b37d5..2430b54a9d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_flow_ratio": [
 		"0.9801"
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
index 7f36cee705..38aed6438a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"filament_flow_ratio": [
 		"0.9702"
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
index c5c4b829a2..f26eeb2114 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"16"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from local standard fallback preset Snapmaker PLA Metal @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
index d110009d58..d8eba5a227 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"6"
+		"2"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
index e05d313038..96869e7af9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -12,12 +12,12 @@
 		"80"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"12"
 	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
index ad19b1abf3..e71fc44138 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"10"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
index 3856c5e5a2..4b8d8be438 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"30"
+		"10"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
index ef43a62cc1..dd492516fb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"6"
+		"2"
 	],
 	"pressure_advance": [
 		"0.24"
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2 x 3 = 6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
index 9ab350a7ba..03be272261 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"1"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"40"
 	],
 	"filament_multitool_ramming_flow": [
 		"40"
@@ -21,6 +21,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
index ab657264ad..8bb018713c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"pressure_advance": [
 		"0.024"
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
index 5e9be868b6..6af5875213 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	],
 	"pressure_advance": [
 		"0.0216"
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
index b7b8357798..66ea29ff0c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1.6 x 3 = 4.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"4.8"
+		"1.6"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
index 67a5c77f4a..dd3134ef2b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -12,9 +12,9 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
index 29767b5045..647971457c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
index 6790f2a521..ef2bcbe096 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
index 95ef69bb13..5f3d8d6cc7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"20"
 	],
 	"filament_retract_length_toolchange": [
 		"6"
@@ -21,6 +21,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
index 71e3f69b98..b30036af55 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"pressure_advance": [
 		"0.0134"
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
index 9bcde49fd5..9bbf33e51b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
@@ -15,9 +15,9 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"60"
+		"20"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
index c61a287426..310efaefe2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"100"
 	],
 	"filament_max_volumetric_speed": [
-		"45"
+		"20"
 	],
 	"filament_multitool_ramming_flow": [
 		"30"
@@ -33,6 +33,6 @@
 		"0.02"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
index 825567e128..3fecd0e77c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"pressure_advance": [
 		"0.03"
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
index 52100f6bbe..0f5a73930a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -9,7 +9,7 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"54"
+		"18"
 	],
 	"pressure_advance": [
 		"0.03"
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
index e96baac97a..ca38fd6675 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"0.97"
 	],
 	"filament_max_volumetric_speed": [
-		"15"
+		"6"
 	],
 	"filament_multitool_ramming_flow": [
 		"10"
@@ -21,6 +21,6 @@
 		"0.6"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 5 x 3 = 15 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
index 1fb7bc978a..e5ef681dc3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
@@ -12,9 +12,9 @@
 		"0.9506"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"6"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
index cfdd941bc8..693f9a4c27 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
@@ -12,9 +12,9 @@
 		"0.9312"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6 x 3 = 18 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"6"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
index 4b03c0e63d..441562c8d7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"21.6"
+		"7.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.2 x 3 = 21.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.2 mm^3/s, from local standard fallback preset Snapmaker TPE @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
index 130bba2045..1accbf432d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
index d999f651f1..51edd1e01f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
index b49d1d3a09..847f0ed8d5 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"10.5"
+		"3.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.5 x 3 = 10.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
index 55ba8da2db..391cec907f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"9.6"
+		"3.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from local standard fallback preset Snapmaker TPU 95A @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
index 461dcf6e69..0b0d178f90 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"27"
+		"9"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 9 x 3 = 27 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
index 416cfe0097..887c94ee7b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"36"
+		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
index 9971dabbf2..cb976d3246 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"48"
+		"16"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
index 48d709b12d..afaefa2460 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"8.4"
+		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
index 8af4584d0a..00dd85f773 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"8.4"
+		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
index 6009f90585..cb7d2fa74f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"8.4"
+		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 2.8 x 3 = 8.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
index d34d28c7b5..3118864459 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.8"
+		"7.6"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
index 34cf3796f5..0c0a988c82 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.8"
+		"7.6"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
index 9453bf939b..ed24acdd57 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"22.8"
+		"7.6"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.6 x 3 = 22.8 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }

From 30b3666c4759661c85f6e28219887ef8c0ce44ad Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Fri, 18 Sep 2026 07:24:32 -0400
Subject: [PATCH 04/13] U1 HF: Resolve nozzle mismatch on-screen warning

Emit U1 nozzle flow metadata through profile end G-code

Append filament_volume_type footer comments through the standard and High Flow U1 machine profiles. Generate one comma-separated value per logical filament using existing placeholder expressions, preserving the existing end commands. Mixed-diameter standard profiles inherit the standard footer.

Bump the Snapmaker bundle to 02.04.00.17. No C++ or filament-schema changes. Validation intentionally not run at user request.

Co-authored-by: Codex <codex@openai.com>
---
 resources/profiles/Snapmaker.json                              | 2 +-
 .../Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json | 3 ++-
 .../profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json  | 2 +-
 .../Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json | 3 ++-
 .../profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json  | 2 +-
 .../Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json | 3 ++-
 .../profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json  | 2 +-
 .../Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json | 3 ++-
 .../profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json  | 2 +-
 9 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index d415c7dadd..7f2aaa2881 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.16",
+	"version": "02.04.00.17",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
index 9afb250476..6c3a2ff7ae 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -14,5 +14,6 @@
 		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle"
 	],
-	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)"
+	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json
index 0eb1746895..46273a7f44 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
@@ -34,7 +34,7 @@
 		"0",
 		"0"
 	],
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n",
 	"machine_max_jerk_z": [
 		"3",
 		"0.4"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
index f8b8d44e10..cd54aae644 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -14,5 +14,6 @@
 		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle"
 	],
-	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)"
+	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json
index f30fbe9813..d65d549d77 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
@@ -34,7 +34,7 @@
 		"0",
 		"0"
 	],
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n",
 	"machine_max_jerk_z": [
 		"3",
 		"0.4"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
index 53c0d682cd..12f91c71cd 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -14,5 +14,6 @@
 		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle"
 	],
-	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)"
+	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json
index 0067f3d087..b48d528074 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
@@ -34,7 +34,7 @@
 		"0",
 		"0"
 	],
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n",
 	"machine_max_jerk_z": [
 		"3",
 		"0.4"
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
index ded207ffbf..2f9ecca19e 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -14,5 +14,6 @@
 		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle"
 	],
-	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)"
+	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json
index 390cc54281..e3ffac2bb8 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
@@ -34,7 +34,7 @@
 		"0",
 		"0"
 	],
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n",
 	"machine_max_jerk_z": [
 		"3",
 		"0.4"

From 734dc1f9ac5567b66b65813c41e133ff939278fb Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Fri, 18 Sep 2026 09:03:20 -0400
Subject: [PATCH 05/13] Disambiguate nozzles by the variant too

---
 src/slic3r/GUI/Plater.cpp | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp
index 30e1ae1313..f7b22eddc5 100644
--- a/src/slic3r/GUI/Plater.cpp
+++ b/src/slic3r/GUI/Plater.cpp
@@ -1572,8 +1572,10 @@ bool Sidebar::priv::switch_diameter(bool single)
     auto* nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(printer_preset.config.option("nozzle_diameter"));
     if (nozzle_diameter && nozzle_diameter->size() > 0) {
         auto current_nozzle_dia = get_diameter_string(nozzle_diameter->values[0]);
-        // If the selected diameter is the same as current nozzle, don't switch profiles
-        if (current_nozzle_dia == diameter.ToStdString()) {
+        // A named variant can share this diameter; selecting the plain diameter
+        // must still switch back to the standard profile.
+        if (current_nozzle_dia == diameter.ToStdString() &&
+            printer_preset.config.opt_string("printer_variant") == diameter.ToStdString()) {
             return true;
         }
     }
@@ -3677,11 +3679,16 @@ void Sidebar::update_presets(Preset::Type preset_type)
             extruder.combo_flow->SetSelection(select);
         };
 
-        auto update_extruder_diameter = [&diameters, &nozzle_diameter](int extruder_index,ExtruderGroup & extruder) {
+        auto update_extruder_diameter = [&diameters, &nozzle_diameter, &diameter](int extruder_index,ExtruderGroup & extruder) {
             extruder.combo_diameter->Clear();
             int select = -1;
             // ORCA get the actual nozzle diameter from printer config
             auto nozzle_dia = get_diameter_string(nozzle_diameter->values[extruder_index]);
+            // Named variants such as "0.4 High Flow" share a physical diameter.
+            // Retain the variant selection unless the diameter was customized.
+            const auto selected_variant =
+                (diameter == nozzle_dia || boost::algorithm::starts_with(diameter, nozzle_dia + " ")) &&
+                std::find(diameters.begin(), diameters.end(), diameter) != diameters.end() ? diameter : nozzle_dia;
             // ORCA try to add nozzle diameter from config if list is empty. fixes blank nozzle combo box when preset has no alias
             if(diameters[0].empty() && !nozzle_dia.empty()){
                 diameters[0] = nozzle_dia;
@@ -3691,7 +3698,7 @@ void Sidebar::update_presets(Preset::Type preset_type)
                 diameters.push_back(nozzle_dia);
             }
             for (size_t i = 0; i < diameters.size(); ++i) {
-                if (diameters[i] == nozzle_dia)
+                if (diameters[i] == selected_variant)
                     select = extruder.combo_diameter->GetCount();
                 extruder.combo_diameter->Append(diameters[i], {});
             }

From 2f05dbf577dd27e0d74b8c63451fcc56fa4ab1a5 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Tue, 22 Sep 2026 09:39:11 -0400
Subject: [PATCH 06/13] Fix Snapmaker U1 profile defaults and extruder vectors

Register high-flow filament defaults for every U1 nozzle variant in the
wizard, and select compatible filaments for the standard and mixed-nozzle
printers. Size the shared U1 extruder vectors to its four physical tools.
Replace stale 3x flow claims with the source-specific filament guidance.
Bump the Snapmaker bundle version.

Co-authored-by: Codex <noreply@openai.com>
---
 resources/profiles/Snapmaker.json             |  2 +-
 .../Snapmaker U1 (0.2 High Flow nozzle).json  |  2 +-
 .../machine/Snapmaker U1 (0.2 nozzle).json    |  8 ++++++-
 .../Snapmaker U1 (0.4 High Flow nozzle).json  |  2 +-
 .../machine/Snapmaker U1 (0.4 nozzle).json    |  8 ++++++-
 .../Snapmaker U1 (0.4+0.6 nozzle).json        |  8 ++++++-
 .../Snapmaker U1 (0.6 High Flow nozzle).json  |  2 +-
 .../machine/Snapmaker U1 (0.6 nozzle).json    |  8 ++++++-
 .../Snapmaker U1 (0.8 High Flow nozzle).json  |  2 +-
 .../machine/Snapmaker U1 (0.8 nozzle).json    |  8 ++++++-
 .../Snapmaker/machine/Snapmaker U1.json       |  2 +-
 .../profiles/Snapmaker/machine/fdm_U1.json    | 24 -------------------
 12 files changed, 41 insertions(+), 35 deletions(-)

diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 7f2aaa2881..655e322af1 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.17",
+	"version": "02.04.00.18",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
index 6c3a2ff7ae..692b06c904 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.2 High Flow",
-	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
 		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json
index 46273a7f44..c492f67401 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json	
@@ -187,5 +187,11 @@
 	"machine_pause_gcode": "M600",
 	"nozzle_volume": "143",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
-	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)"
+	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
index cd54aae644..92bb62362b 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.4 High Flow",
-	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
 		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json
index d65d549d77..0092b268c3 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json	
@@ -190,5 +190,11 @@
 	"nozzle_volume": "143",
 	"resonance_avoidance": "1",
 	"min_resonance_avoidance_speed": "40",
-	"max_resonance_avoidance_speed": "90"
+	"max_resonance_avoidance_speed": "90",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json
index c9866329bd..3568305ce9 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json	
@@ -26,5 +26,11 @@
 		"0.6",
 		"0.6"
 	],
-	"nozzle_type": "stainless_steel"
+	"nozzle_type": "stainless_steel",
+	"default_filament_profile": [
+		"Generic PLA @System",
+		"Generic PLA @System",
+		"Generic PLA @System",
+		"Generic PLA @System"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
index 12f91c71cd..81844e4a64 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.6 High Flow",
-	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
 		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json
index b48d528074..1a528a6ff2 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json	
@@ -187,5 +187,11 @@
 	"machine_pause_gcode": "M600",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
 	"nozzle_volume": "143",
-	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)"
+	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
index 2f9ecca19e..2b357df990 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.8 High Flow",
-	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets set the volumetric speed ceiling to 3x the matching non-HF filament at this diameter. This ceiling is not a measured flow capability. Calibrate for your nozzle and filament.",
+	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
 		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
 		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json
index e3ffac2bb8..d80a52ca48 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json	
@@ -187,5 +187,11 @@
 	"machine_pause_gcode": "M600",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
 	"nozzle_volume": "143",
-	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)"
+	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+	"default_filament_profile": [
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
index 0b5f8c8a93..532e3a22bf 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -5,7 +5,7 @@
 	"family": "Snapmaker",
 	"url": "",
 	"model_id": "797581801",
-	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1;Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
 	"bed_model": "Snapmaker U1_bed.stl",
 	"bed_texture": "Snapmaker U1_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow"
diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json
index 85a94df1d8..bec96fc2c1 100644
--- a/resources/profiles/Snapmaker/machine/fdm_U1.json
+++ b/resources/profiles/Snapmaker/machine/fdm_U1.json
@@ -12,168 +12,144 @@
 		"0.32",
 		"0.32",
 		"0.32",
-		"0.32",
 		"0.32"
 	],
 	"min_layer_height": [
 		"0.08",
 		"0.08",
 		"0.08",
-		"0.08",
 		"0.08"
 	],
 	"deretraction_speed": [
 		"30",
 		"30",
 		"30",
-		"30",
 		"30"
 	],
 	"extruder_colour": [
 		"#FCE94F",
 		"#FCE94F",
 		"#FCE94F",
-		"#FCE94F",
 		"#FCE94F"
 	],
 	"extruder_offset": [
 		"0x0",
 		"0x0",
 		"0x0",
-		"0x0",
 		"0x0"
 	],
 	"long_retractions_when_cut": [
 		"0",
 		"0",
 		"0",
-		"0",
 		"0"
 	],
 	"nozzle_diameter": [
 		"0.4",
 		"0.4",
 		"0.4",
-		"0.4",
 		"0.4"
 	],
 	"retract_before_wipe": [
 		"70%",
 		"70%",
 		"70%",
-		"70%",
 		"70%"
 	],
 	"retract_length_toolchange": [
 		"2",
 		"2",
 		"2",
-		"2",
 		"2"
 	],
 	"retract_lift_above": [
 		"0",
 		"0",
 		"0",
-		"0",
 		"0"
 	],
 	"retract_lift_below": [
 		"0",
 		"0",
 		"0",
-		"0",
 		"0"
 	],
 	"retract_lift_enforce": [
 		"All Surfaces",
 		"All Surfaces",
 		"All Surfaces",
-		"All Surfaces",
 		"All Surfaces"
 	],
 	"retract_restart_extra": [
 		"0",
 		"0",
 		"0",
-		"0",
 		"0"
 	],
 	"retract_restart_extra_toolchange": [
 		"0",
 		"0",
 		"0",
-		"0",
 		"0"
 	],
 	"retract_when_changing_layer": [
 		"1",
 		"1",
 		"1",
-		"1",
 		"1"
 	],
 	"retraction_distances_when_cut": [
 		"18",
 		"18",
 		"18",
-		"18",
 		"18"
 	],
 	"retraction_length": [
 		"0.8",
 		"0.8",
 		"0.8",
-		"0.8",
 		"0.8"
 	],
 	"retraction_minimum_travel": [
 		"1",
 		"1",
 		"1",
-		"1",
 		"1"
 	],
 	"retraction_speed": [
 		"30",
 		"30",
 		"30",
-		"30",
 		"30"
 	],
 	"travel_slope": [
 		"3",
 		"3",
 		"3",
-		"3",
 		"3"
 	],
 	"wipe": [
 		"1",
 		"1",
 		"1",
-		"1",
 		"1"
 	],
 	"wipe_distance": [
 		"1",
 		"1",
 		"1",
-		"1",
 		"1"
 	],
 	"z_hop": [
 		"0.4",
 		"0.4",
 		"0.4",
-		"0.4",
 		"0.4"
 	],
 	"z_hop_types": [
 		"Normal Lift",
 		"Normal Lift",
 		"Normal Lift",
-		"Normal Lift",
 		"Normal Lift"
 	],
 	"purge_in_prime_tower": "0",

From 517286c93d93088dd53e5866021d5e720be7dc98 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Thu, 24 Sep 2026 08:50:54 -0400
Subject: [PATCH 07/13] Apply consistent output filenames to all Snapmaker U1
 presets

Extend the existing U1 filename format to the base process preset and let Benchy presets inherit it. Bump the Snapmaker catalog version.

Co-authored-by: Codex <codex@openai.com>
---
 resources/profiles/Snapmaker.json                               | 2 +-
 .../process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json         | 1 -
 resources/profiles/Snapmaker/process/fdm_process_U1.json        | 2 +-
 3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index 655e322af1..8abdc0287b 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.18",
+	"version": "02.04.00.19",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json
index 2dcf03d540..c7d7abf58a 100644
--- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
@@ -29,7 +29,6 @@
 	"detect_overhang_wall": "0",
 	"reduce_crossing_wall": "0",
 	"ensure_vertical_shell_thickness": "none",
-	"filename_format": "testBenchy_{print_time}.gcode",
 	"sparse_infill_density": "10%",
 	"sparse_infill_pattern": "alignedrectilinear",
 	"wall_generator": "classic",
diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json
index 4e0d7bf6e6..c05db3013a 100644
--- a/resources/profiles/Snapmaker/process/fdm_process_U1.json
+++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json
@@ -28,7 +28,7 @@
 	"interface_shells": "0",
 	"detect_overhang_wall": "0",
 	"reduce_infill_retraction": "0",
-	"filename_format": "{input_filename_base}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_no_support_extruder]}_{int(total_weight*10) / 10.0}g_{print_time}.gcode",
 	"wall_loops": "2",
 	"inner_wall_line_width": "0.45",
 	"inner_wall_speed": "40",

From 2fcf2222b6d899f05ac2448e00293583f0110046 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Sun, 27 Sep 2026 14:14:28 -0400
Subject: [PATCH 08/13] Refresh filament controls after loading printer presets

Synchronize the plater filament controls after preset loading, even when the internal filament list already matches the nozzle count.

Co-authored-by: Codex <codex@openai.com>
---
 src/slic3r/GUI/GUI_App.cpp | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index a41001f9e0..0cac129e78 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -8874,6 +8874,11 @@ void GUI_App::load_current_presets(bool active_preset_combox/*= false*/, bool ch
 			if (active_preset_combox)
 				tab->reactive_preset_combo_box();
 		}
+    // Preset loading can resize the filament list without an extruder-count change event.
+    // Refresh the controls even when the list already matches the printer's nozzle count.
+    if (printer_technology == ptFFF)
+        this->plater()->on_filament_count_change(preset_bundle->filament_presets.size());
+
     // BBS: model config
     for (Tab *tab : model_tabs_list)
 		if (tab->supports_printer_technology(printer_technology)) {

From ea49b4851e2c2f96ac101af60194725408373548 Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Tue, 29 Sep 2026 07:26:38 -0400
Subject: [PATCH 09/13] Make U1 filament notes readable without commit
 references

Co-authored-by: Codex <codex@openai.com>
---
 .../filament/Generic PETG @U1 0.2 High Flow nozzle.json         | 2 +-
 .../filament/Generic PETG @U1 0.4 High Flow nozzle.json         | 2 +-
 .../filament/Generic PETG @U1 0.6 High Flow nozzle.json         | 2 +-
 .../filament/Generic PETG @U1 0.8 High Flow nozzle.json         | 2 +-
 .../filament/Generic PETG HF @U1 0.2 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG HF @U1 0.4 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG HF @U1 0.6 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG HF @U1 0.8 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json      | 2 +-
 .../filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json      | 2 +-
 .../filament/Generic PLA @U1 0.2 High Flow nozzle.json          | 2 +-
 .../filament/Generic PLA @U1 0.4 High Flow nozzle.json          | 2 +-
 .../filament/Generic PLA @U1 0.6 High Flow nozzle.json          | 2 +-
 .../filament/Generic PLA @U1 0.8 High Flow nozzle.json          | 2 +-
 .../Generic PLA High Speed @U1 0.2 High Flow nozzle.json        | 2 +-
 .../Generic PLA High Speed @U1 0.4 High Flow nozzle.json        | 2 +-
 .../Generic PLA High Speed @U1 0.6 High Flow nozzle.json        | 2 +-
 .../Generic PLA High Speed @U1 0.8 High Flow nozzle.json        | 2 +-
 .../filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json     | 2 +-
 .../filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json     | 2 +-
 .../filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json     | 2 +-
 .../filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json     | 2 +-
 .../filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json       | 2 +-
 .../filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json       | 2 +-
 .../filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json       | 2 +-
 .../filament/Generic TPU @U1 0.4 High Flow nozzle.json          | 2 +-
 .../filament/Generic TPU @U1 0.6 High Flow nozzle.json          | 2 +-
 .../filament/Generic TPU @U1 0.8 High Flow nozzle.json          | 2 +-
 .../Polymaker General PLA Family @U1 0.4 High Flow nozzle.json  | 2 +-
 .../Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json     | 2 +-
 .../Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json    | 2 +-
 .../Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json    | 2 +-
 .../Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json    | 2 +-
 .../Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json    | 2 +-
 .../Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json  | 2 +-
 .../Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json  | 2 +-
 .../filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json  | 2 +-
 .../filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json  | 2 +-
 .../filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json  | 2 +-
 .../filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json   | 2 +-
 .../Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json       | 2 +-
 .../Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json       | 2 +-
 .../Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json       | 2 +-
 .../Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json       | 2 +-
 .../Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json     | 2 +-
 .../Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json     | 2 +-
 .../Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json     | 2 +-
 .../Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json     | 2 +-
 .../filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json   | 2 +-
 .../filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json     | 2 +-
 .../filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json     | 2 +-
 .../filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json     | 2 +-
 .../filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json    | 2 +-
 .../filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json | 2 +-
 .../filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json | 2 +-
 .../filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json | 2 +-
 .../filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json        | 2 +-
 .../filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json        | 2 +-
 80 files changed, 80 insertions(+), 80 deletions(-)

diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
index 69a948e993..b3774299ab 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
index c0ea593f87..3d2d110ab8 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
index dbb184c629..4c39a6b53f 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
index f34b489862..7700ec94a9 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
index bf10c3f60a..7afbd3ad2f 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
index f6c8c07549..6e79495a5d 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
index a9a0fad842..e2734fdbe7 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
index ec6e6fb489..21c39efbb2 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"16"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
index 541068fb5a..e1ebd81f1c 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"11"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
index 5533276d17..0bc1021008 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"11.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
index e351a4ca4e..acdb9f92c9 100644
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"11.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
index 68231acfb7..4c60340703 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"1.6"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
index 2baa380948..04f5b81b65 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
index 10c26c9d84..e9cd941ccb 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
index e718fafcf4..0df240dcd0 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
index 86932032b6..228901f1cf 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
index af222bcf59..e016e53d1a 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
index 69d900ad3f..348db5014d 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
index 7aab3575f0..f377e30f7b 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"18"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
index edcf2ba1b4..53fc87bb9b 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
index c3670ffc51..980840da51 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
index 9bb5ac2b2e..d3e0aced6d 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
index cf4f4fc493..450b030227 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"7.5"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
index 85ca08b766..07af2d1a24 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
index af044f19ea..aa2ae79dc5 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
index 3aba0b6dc9..ddeec0f5bd 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
index 665559b2f7..83ff889f31 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
index 475ad1725c..cd745b81b6 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
index 3e5a21716f..589302d895 100644
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
@@ -17,6 +17,6 @@
 		"3.2"
 	],
 	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
index 2c0f8a6936..22401d9ca5 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
index c51dce398d..0c9dfe4271 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
index 724ab002c2..2eac1cc0c2 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
index 0de983e448..fb361728c6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
@@ -45,6 +45,6 @@
 		"280"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
index 212e9b1044..b5609dc056 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
@@ -45,6 +45,6 @@
 		"0.02"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
index 6fded62f26..c86ce97a3a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
index 5b562ef932..232d346113 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
@@ -63,6 +63,6 @@
 		"0.035"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
index 1bb8fca6dd..80eb645ad2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
index b95ecd4911..10321dcf95 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
index eec95f80bf..6c67be5752 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"1"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
index 1a17739f69..c25ea01897 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"0.05"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"10"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
index 0fceb6ef5a..675e07357b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"16"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
index 26749c6ecf..d8771ee472 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"16"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
index 6c06c1c4bf..c5473497d8 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
@@ -60,6 +60,6 @@
 		"0.028"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
index 3d2e16dc7f..86cd96747b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"15"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
index 1a63ff75cc..f408b23651 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
@@ -24,7 +24,7 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"15"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
index b2f4efcfb1..70c4b76b98 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
@@ -21,6 +21,6 @@
 		"0.023"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
index 3b2e3541c4..f9f65c0f64 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
index 45bf88f8b5..6a39076a6f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
@@ -39,6 +39,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
index 2430b54a9d..6c471d4f08 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
index 38aed6438a..d076c056a5 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
@@ -27,6 +27,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
index d8eba5a227..a3715598dd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"2"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
index 96869e7af9..23626faf6a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
@@ -18,6 +18,6 @@
 		"Slope Lift"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
index e71fc44138..b4f510bfec 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"10"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
index 4b8d8be438..4919383540 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"10"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
index dd492516fb..4b3e1405bb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
index 03be272261..48a4044180 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
@@ -21,6 +21,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
index 8bb018713c..92c7b1388d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
index 6af5875213..20db16271a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
index 66ea29ff0c..30c289604f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"1.6"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
index dd3134ef2b..d8ab413ff1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"12"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
index 647971457c..08ef19a9cb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"12"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
index ef2bcbe096..a2e1b4dc16 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"12"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
index 5f3d8d6cc7..47fa100cd1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
@@ -21,6 +21,6 @@
 		"0.024"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
index b30036af55..9fc8c36369 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
@@ -18,6 +18,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
index 9bbf33e51b..5300cdbb96 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
@@ -15,7 +15,7 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"20"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
index 310efaefe2..b156c65012 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
@@ -33,6 +33,6 @@
 		"0.02"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
index 3fecd0e77c..28e15cb5eb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
index 0f5a73930a..7c62ffd8ed 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
@@ -24,6 +24,6 @@
 		"1"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
index ca38fd6675..ab3a76e43d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
@@ -21,6 +21,6 @@
 		"0.6"
 	],
 	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
index e5ef681dc3..b3f8c6db87 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"0.9506"
 	],
 	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"6"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
index 693f9a4c27..b18972c81f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
@@ -12,7 +12,7 @@
 		"0.9312"
 	],
 	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
 		"6"
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
index 1accbf432d..61b7ca0026 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"3.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
index 51edd1e01f..0e85a008d6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"3.2"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
index 847f0ed8d5..bd3a88d1cd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"3.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
index 0b0d178f90..f0b49ea018 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"9"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
index 887c94ee7b..198b8de558 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"12"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
index cb976d3246..28374dc75a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"16"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
index afaefa2460..c976fd3bc9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
index 00dd85f773..98b3b6a564 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
index cb7d2fa74f..8f49d839c3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
@@ -12,6 +12,6 @@
 		"10.5"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }

From a46e29c21e3e561cea9ba0c8a7e2a36e1b50438f Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Tue, 29 Sep 2026 07:31:37 -0400
Subject: [PATCH 10/13] Update breakaway support flow for HF 0.4

---
 ...er Breakaway Support For PLA @U1 0.4 High Flow nozzle.json | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
index 9d8922829a..32fd557a65 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
@@ -9,9 +9,9 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker Support For PLA @U1 0.4 nozzle. Its base identifies the material as Snapmaker Breakaway Support. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }

From 7cbea5f454c2fb7493bf76ae12aa14d56f557afa Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Tue, 29 Sep 2026 08:24:37 -0400
Subject: [PATCH 11/13] Consolidate U1 nozzle variants while preserving
 filament tuning

Support variant-specific cooling, pressure advance, purge, ramming and temperature ranges. Keep shared U1 values as singletons and verify element-zero fallback for missing variant entries. Preserve preset migration aliases and validate high-flow selections using their declared nozzle volumes.

Co-authored-by: Codex <codex@openai.com>
---
 resources/profiles/Snapmaker.json             | 710 ++----------------
 ...ron ASA-CF08 @U1 0.4 High Flow nozzle.json |  17 -
 ...on PA12-CF10 @U1 0.4 High Flow nozzle.json |  17 -
 ...ron PA6-CF20 @U1 0.4 High Flow nozzle.json |  17 -
 ...on PA612-ESD @U1 0.4 High Flow nozzle.json |  17 -
 ...ron PETG-ESD @U1 0.4 High Flow nozzle.json |  17 -
 ...ron PPS-GF20 @U1 0.4 High Flow nozzle.json |  17 -
 ...Generic PETG @U1 0.2 High Flow nozzle.json |  22 -
 .../filament/Generic PETG @U1 0.2 nozzle.json |  24 +
 ...Generic PETG @U1 0.4 High Flow nozzle.json |  22 -
 .../filament/Generic PETG @U1 0.4 nozzle.json |  24 +
 ...Generic PETG @U1 0.6 High Flow nozzle.json |  22 -
 .../filament/Generic PETG @U1 0.6 nozzle.json |  24 +
 ...Generic PETG @U1 0.8 High Flow nozzle.json |  22 -
 .../filament/Generic PETG @U1 0.8 nozzle.json |  24 +
 ...eric PETG HF @U1 0.2 High Flow nozzle.json |  22 -
 .../Generic PETG HF @U1 0.2 nozzle.json       |  24 +
 ...eric PETG HF @U1 0.4 High Flow nozzle.json |  22 -
 .../Generic PETG HF @U1 0.4 nozzle.json       |  24 +
 ...eric PETG HF @U1 0.6 High Flow nozzle.json |  22 -
 .../Generic PETG HF @U1 0.6 nozzle.json       |  24 +
 ...eric PETG HF @U1 0.8 High Flow nozzle.json |  22 -
 .../Generic PETG HF @U1 0.8 nozzle.json       |  24 +
 ...eric PETG-CF @U1 0.4 High Flow nozzle.json |  22 -
 .../Generic PETG-CF @U1 0.4 nozzle.json       |  24 +
 ...eric PETG-CF @U1 0.6 High Flow nozzle.json |  22 -
 .../Generic PETG-CF @U1 0.6 nozzle.json       |  20 +
 ...eric PETG-CF @U1 0.8 High Flow nozzle.json |  22 -
 .../Generic PETG-CF @U1 0.8 nozzle.json       |  20 +
 .../Generic PLA @U1 0.2 High Flow nozzle.json |  22 -
 .../filament/Generic PLA @U1 0.2 nozzle.json  |  24 +
 .../Generic PLA @U1 0.4 High Flow nozzle.json |  22 -
 .../filament/Generic PLA @U1 0.4 nozzle.json  |  23 +
 .../Generic PLA @U1 0.6 High Flow nozzle.json |  22 -
 .../filament/Generic PLA @U1 0.6 nozzle.json  |  23 +
 .../Generic PLA @U1 0.8 High Flow nozzle.json |  22 -
 .../filament/Generic PLA @U1 0.8 nozzle.json  |  23 +
 ...A High Speed @U1 0.2 High Flow nozzle.json |  22 -
 ...Generic PLA High Speed @U1 0.2 nozzle.json |  24 +
 ...A High Speed @U1 0.4 High Flow nozzle.json |  22 -
 ...Generic PLA High Speed @U1 0.4 nozzle.json |  23 +
 ...A High Speed @U1 0.6 High Flow nozzle.json |  22 -
 ...Generic PLA High Speed @U1 0.6 nozzle.json |  23 +
 ...A High Speed @U1 0.8 High Flow nozzle.json |  22 -
 ...Generic PLA High Speed @U1 0.8 nozzle.json |  23 +
 ...ric PLA Silk @U1 0.2 High Flow nozzle.json |  22 -
 .../Generic PLA Silk @U1 0.2 nozzle.json      |  24 +
 ...ric PLA Silk @U1 0.4 High Flow nozzle.json |  22 -
 .../Generic PLA Silk @U1 0.4 nozzle.json      |  20 +
 ...ric PLA Silk @U1 0.6 High Flow nozzle.json |  22 -
 .../Generic PLA Silk @U1 0.6 nozzle.json      |  20 +
 ...ric PLA Silk @U1 0.8 High Flow nozzle.json |  22 -
 .../Generic PLA Silk @U1 0.8 nozzle.json      |  20 +
 ...neric PLA-CF @U1 0.4 High Flow nozzle.json |  22 -
 .../Generic PLA-CF @U1 0.4 nozzle.json        |  23 +
 ...neric PLA-CF @U1 0.6 High Flow nozzle.json |  22 -
 .../Generic PLA-CF @U1 0.6 nozzle.json        |  23 +
 ...neric PLA-CF @U1 0.8 High Flow nozzle.json |  22 -
 .../Generic PLA-CF @U1 0.8 nozzle.json        |  23 +
 .../Generic TPU @U1 0.4 High Flow nozzle.json |  22 -
 .../filament/Generic TPU @U1 0.4 nozzle.json  |  20 +
 .../Generic TPU @U1 0.6 High Flow nozzle.json |  22 -
 .../filament/Generic TPU @U1 0.6 nozzle.json  |  20 +
 .../Generic TPU @U1 0.8 High Flow nozzle.json |  22 -
 .../filament/Generic TPU @U1 0.8 nozzle.json  |  20 +
 ...nchroma CoPE @U1 0.4 High Flow nozzle.json |  17 -
 ...anchroma PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...LA Celestial @U1 0.4 High Flow nozzle.json |  17 -
 ...a PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 -
 ...oma PLA Glow @U1 0.4 High Flow nozzle.json |  17 -
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 -
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 -
 ...ma PLA Matte @U1 0.4 High Flow nozzle.json |  17 -
 ...PLA Metallic @U1 0.4 High Flow nozzle.json |  17 -
 ...oma PLA Neon @U1 0.4 High Flow nozzle.json |  17 -
 ...ma PLA Satin @U1 0.4 High Flow nozzle.json |  17 -
 ...oma PLA Silk @U1 0.4 High Flow nozzle.json |  17 -
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 -
 ...A Temp Shift @U1 0.4 High Flow nozzle.json |  17 -
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 -
 ...PLA UV Shift @U1 0.4 High Flow nozzle.json |  17 -
 ...yLite CosPLA @U1 0.4 High Flow nozzle.json |  17 -
 ...olyLite PETG @U1 0.4 High Flow nozzle.json |  17 -
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 -
 ...PolyLite PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...e PLA Galaxy @U1 0.4 High Flow nozzle.json |  17 -
 ...ite PLA Glow @U1 0.4 High Flow nozzle.json |  17 -
 ...PLA Luminous @U1 0.4 High Flow nozzle.json |  17 -
 ...ite PLA Neon @U1 0.4 High Flow nozzle.json |  17 -
 ...Lite PLA Pro @U1 0.4 High Flow nozzle.json |  17 -
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 -
 ...LA Starlight @U1 0.4 High Flow nozzle.json |  17 -
 ... Translucent @U1 0.4 High Flow nozzle.json |  17 -
 ...olyTerra PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...a PLA Marble @U1 0.4 High Flow nozzle.json |  17 -
 ...lyTerra PLA+ @U1 0.4 High Flow nozzle.json |  17 -
 ...l PLA Family @U1 0.4 High Flow nozzle.json |  17 -
 .../Polymaker General PLA Family @U1.json     |  11 +-
 ...maker HT-PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...er HT-PLA-GF @U1 0.4 High Flow nozzle.json |  17 -
 ...lymaker PETG @U1 0.4 High Flow nozzle.json |  17 -
 ... PETG Galaxy @U1 0.4 High Flow nozzle.json |  17 -
 ...olymaker PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...aker PLA Pro @U1 0.4 High Flow nozzle.json |  17 -
 ...Pro Metallic @U1 0.4 High Flow nozzle.json |  17 -
 ...k PLA Family @U1 0.4 High Flow nozzle.json |  17 -
 .../Polymaker Silk PLA Family @U1.json        |  11 +-
 ...h PLA Family @U1 0.4 High Flow nozzle.json |  17 -
 .../Polymaker Tough PLA Family @U1.json       |  11 +-
 .../Fiberon ASA-CF08 @Snapmaker U1.json       |  11 +-
 .../Fiberon PA12-CF10 @Snapmaker U1.json      |  11 +-
 .../Fiberon PA6-CF20 @Snapmaker U1.json       |  11 +-
 .../Fiberon PA612-ESD @Snapmaker U1.json      |  11 +-
 .../Fiberon PETG-ESD @Snapmaker U1.json       |  11 +-
 .../Fiberon PPS-GF20 @Snapmaker U1.json       |  13 +-
 .../Panchroma CoPE @Snapmaker U1.json         |  12 +-
 .../Panchroma PLA @Snapmaker U1.json          |  12 +-
 ...Panchroma PLA Celestial @Snapmaker U1.json |  12 +-
 .../Panchroma PLA Galaxy @Snapmaker U1.json   |  12 +-
 .../Panchroma PLA Glow @Snapmaker U1.json     |  12 +-
 .../Panchroma PLA Luminous @Snapmaker U1.json |  12 +-
 .../Panchroma PLA Marble @Snapmaker U1.json   |  12 +-
 .../Panchroma PLA Matte @Snapmaker U1.json    |  12 +-
 .../Panchroma PLA Metallic @Snapmaker U1.json |  12 +-
 .../Panchroma PLA Neon @Snapmaker U1.json     |  12 +-
 .../Panchroma PLA Satin @Snapmaker U1.json    |  12 +-
 .../Panchroma PLA Silk @Snapmaker U1.json     |  12 +-
 ...Panchroma PLA Starlight @Snapmaker U1.json |  12 +-
 ...anchroma PLA Temp Shift @Snapmaker U1.json |  24 +-
 ...nchroma PLA Translucent @Snapmaker U1.json |  12 +-
 .../Panchroma PLA UV Shift @Snapmaker U1.json |  12 +-
 .../PolyLite CosPLA @Snapmaker U1.json        |  11 +-
 .../PolyLite PETG @Snapmaker U1.json          |  11 +-
 ...lyLite PETG Translucent @Snapmaker U1.json |  11 +-
 .../Polymaker/PolyLite PLA @Snapmaker U1.json |  12 +-
 .../PolyLite PLA Galaxy @Snapmaker U1.json    |  11 +-
 .../PolyLite PLA Glow @Snapmaker U1.json      |  11 +-
 .../PolyLite PLA Luminous @Snapmaker U1.json  |  11 +-
 .../PolyLite PLA Neon @Snapmaker U1.json      |  11 +-
 .../PolyLite PLA Pro @Snapmaker U1.json       |  24 +-
 ...lyLite PLA Pro Metallic @Snapmaker U1.json |  11 +-
 .../PolyLite PLA Starlight @Snapmaker U1.json |  11 +-
 ...olyLite PLA Translucent @Snapmaker U1.json |  11 +-
 .../PolyTerra PLA @Snapmaker U1.json          |  12 +-
 .../PolyTerra PLA Marble @Snapmaker U1.json   |  11 +-
 .../PolyTerra PLA+ @Snapmaker U1.json         |  11 +-
 .../Polymaker HT-PLA @Snapmaker U1.json       |  12 +-
 .../Polymaker HT-PLA-GF @Snapmaker U1.json    |  12 +-
 .../Polymaker PETG @Snapmaker U1.json         |  11 +-
 .../Polymaker PETG Galaxy @Snapmaker U1.json  |  11 +-
 .../Polymaker PLA @Snapmaker U1.json          |  10 +-
 .../Polymaker PLA Pro @Snapmaker U1.json      |  11 +-
 ...ymaker PLA Pro Metallic @Snapmaker U1.json |  11 +-
 ...napmaker ABS @U1 0.4 High Flow nozzle.json |  50 --
 .../Snapmaker/filament/Snapmaker ABS @U1.json |  58 +-
 ...r ABS Benchy @U1 0.4 High Flow nozzle.json |  20 -
 .../filament/Snapmaker ABS Benchy @U1.json    |  11 +-
 ...napmaker ASA @U1 0.4 High Flow nozzle.json |  50 --
 .../Snapmaker/filament/Snapmaker ASA @U1.json |  58 +-
 ...port For PLA @U1 0.2 High Flow nozzle.json |  17 -
 ...akaway Support For PLA @U1 0.2 nozzle.json |  14 +-
 ...port For PLA @U1 0.4 High Flow nozzle.json |  17 -
 ...port For PLA @U1 0.6 High Flow nozzle.json |  17 -
 ...akaway Support For PLA @U1 0.6 nozzle.json |  14 +-
 ...port For PLA @U1 0.8 High Flow nozzle.json |  17 -
 ...akaway Support For PLA @U1 0.8 nozzle.json |  14 +-
 ...apmaker Breakaway Support For PLA @U1.json |  15 +-
 ...pmaker PA-CF @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PA-CF @U1.json         |  11 +-
 ...napmaker PET @U1 0.4 High Flow nozzle.json |  17 -
 .../Snapmaker/filament/Snapmaker PET @U1.json |  11 +-
 ...apmaker PETG @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PETG @U1.json          |  11 +-
 ...aker PETG HF @U1 0.2 High Flow nozzle.json |  29 -
 .../Snapmaker PETG HF @U1 0.2 nozzle.json     |  33 +-
 ... => Snapmaker PETG HF @U1 0.4 nozzle.json} |  98 ++-
 ...aker PETG HF @U1 0.6 High Flow nozzle.json |  29 -
 .../Snapmaker PETG HF @U1 0.6 nozzle.json     |  30 +-
 ...aker PETG HF @U1 0.8 High Flow nozzle.json |  29 -
 .../Snapmaker PETG HF @U1 0.8 nozzle.json     |  30 +-
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 -
 ...maker PETG Translucent @U1 0.2 nozzle.json |  20 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |  23 -
 ...maker PETG Translucent @U1 0.4 nozzle.json |  17 +-
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 -
 ...maker PETG Translucent @U1 0.6 nozzle.json |  20 +-
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 -
 ...maker PETG Translucent @U1 0.8 nozzle.json |  20 +-
 ...aker PETG-CF @U1 0.4 High Flow nozzle.json |  65 --
 .../filament/Snapmaker PETG-CF @U1.json       |  78 +-
 ...napmaker PLA @U1 0.4 High Flow nozzle.json |  17 -
 .../Snapmaker/filament/Snapmaker PLA @U1.json |  11 +-
 ...er PLA Basic @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PLA Basic @U1.json     |  31 +-
 ...aker PLA Eco @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PLA Eco @U1.json       |  11 +-
 ...ull Spectrum @U1 0.4 High Flow nozzle.json |  32 -
 ...aker PLA Full Spectrum @U1 0.4 nozzle.json |  43 +-
 ...ker PLA Glow @U1 0.4 High Flow nozzle.json |  26 -
 .../Snapmaker PLA Glow @U1 0.4 nozzle.json    |  24 +-
 ...ker PLA Lite @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PLA Lite @U1.json      |  31 +-
 ...er PLA Matte @U1 0.2 High Flow nozzle.json |  32 -
 .../Snapmaker PLA Matte @U1 0.2 nozzle.json   |  37 +-
 ...er PLA Matte @U1 0.4 High Flow nozzle.json |  44 --
 ...er PLA Matte @U1 0.6 High Flow nozzle.json |  32 -
 .../Snapmaker PLA Matte @U1 0.6 nozzle.json   |  34 +-
 ...er PLA Matte @U1 0.8 High Flow nozzle.json |  32 -
 .../Snapmaker PLA Matte @U1 0.8 nozzle.json   |  34 +-
 .../filament/Snapmaker PLA Matte @U1.json     |  73 +-
 ...er PLA Metal @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker PLA Metal @U1.json     |  11 +-
 ...ker PLA Silk @U1 0.2 High Flow nozzle.json |  17 -
 .../Snapmaker PLA Silk @U1 0.2 nozzle.json    |  19 +-
 ...ker PLA Silk @U1 0.4 High Flow nozzle.json |  23 -
 ...ker PLA Silk @U1 0.6 High Flow nozzle.json |  17 -
 .../Snapmaker PLA Silk @U1 0.6 nozzle.json    |  19 +-
 ...ker PLA Silk @U1 0.8 High Flow nozzle.json |  17 -
 .../Snapmaker PLA Silk @U1 0.8 nozzle.json    |  19 +-
 .../filament/Snapmaker PLA Silk @U1.json      |  28 +-
 ...LA SnapSpeed @U1 0.2 High Flow nozzle.json |  23 -
 ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json |  17 +-
 ...LA SnapSpeed @U1 0.4 High Flow nozzle.json |  26 -
 ...LA SnapSpeed @U1 0.6 High Flow nozzle.json |  23 -
 ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json |  18 +-
 ...LA SnapSpeed @U1 0.8 High Flow nozzle.json |  23 -
 ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json |  17 +-
 .../filament/Snapmaker PLA SnapSpeed @U1.json |  40 +-
 ... Translucent @U1 0.2 High Flow nozzle.json |  23 -
 ...pmaker PLA Translucent @U1 0.2 nozzle.json |  46 +-
 ... Translucent @U1 0.4 High Flow nozzle.json |  20 -
 ...pmaker PLA Translucent @U1 0.4 nozzle.json |  58 +-
 ... Translucent @U1 0.6 High Flow nozzle.json |  23 -
 ...pmaker PLA Translucent @U1 0.6 nozzle.json |  55 +-
 ... Translucent @U1 0.8 High Flow nozzle.json |  23 -
 ...pmaker PLA Translucent @U1 0.8 nozzle.json |  52 +-
 ...ker PLA Wood @U1 0.4 High Flow nozzle.json |  26 -
 .../Snapmaker PLA Wood @U1 0.4 nozzle.json    |  27 +-
 ...ker PLA Wood @U1 0.6 High Flow nozzle.json |  23 -
 .../Snapmaker PLA Wood @U1 0.6 nozzle.json    |  20 +-
 ...ker PLA Wood @U1 0.8 High Flow nozzle.json |  23 -
 .../Snapmaker PLA Wood @U1 0.8 nozzle.json    |  17 +-
 ...maker PLA-CF @U1 0.4 High Flow nozzle.json |  38 -
 .../Snapmaker PLA-CF @U1 0.4 nozzle.json      |  42 +-
 ...maker PLA-CF @U1 0.6 High Flow nozzle.json |  29 -
 .../Snapmaker PLA-CF @U1 0.6 nozzle.json      |  29 +-
 ...maker PLA-CF @U1 0.8 High Flow nozzle.json |  29 -
 .../Snapmaker PLA-CF @U1 0.8 nozzle.json      |  29 +-
 ...napmaker PVA @U1 0.4 High Flow nozzle.json |  26 -
 ...napmaker PVA @U1 0.6 High Flow nozzle.json |  20 -
 .../Snapmaker PVA @U1 0.6 nozzle.json         |  17 +-
 ...napmaker PVA @U1 0.8 High Flow nozzle.json |  20 -
 .../Snapmaker PVA @U1 0.8 nozzle.json         |  17 +-
 .../Snapmaker/filament/Snapmaker PVA @U1.json |  24 +-
 ...napmaker TPE @U1 0.4 High Flow nozzle.json |  17 -
 .../Snapmaker/filament/Snapmaker TPE @U1.json |  10 +-
 ...aker TPU 90A @U1 0.4 High Flow nozzle.json |  17 -
 ...aker TPU 90A @U1 0.6 High Flow nozzle.json |  17 -
 .../Snapmaker TPU 90A @U1 0.6 nozzle.json     |  14 +-
 ...aker TPU 90A @U1 0.8 High Flow nozzle.json |  17 -
 .../Snapmaker TPU 90A @U1 0.8 nozzle.json     |  17 +-
 .../filament/Snapmaker TPU 90A @U1.json       |  17 +-
 ...aker TPU 95A @U1 0.4 High Flow nozzle.json |  17 -
 .../filament/Snapmaker TPU 95A @U1.json       |  43 +-
 ...r TPU 95A HF @U1 0.4 High Flow nozzle.json |  17 -
 ...r TPU 95A HF @U1 0.6 High Flow nozzle.json |  17 -
 .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json  |  14 +-
 ...r TPU 95A HF @U1 0.8 High Flow nozzle.json |  17 -
 .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json  |  14 +-
 .../filament/Snapmaker TPU 95A HF @U1.json    |  17 +-
 ...napmaker TPU @U1 0.4 High Flow nozzle.json |  17 -
 ...napmaker TPU @U1 0.6 High Flow nozzle.json |  17 -
 ...napmaker TPU @U1 0.8 High Flow nozzle.json |  17 -
 .../Snapmaker/filament/Snapmaker TPU @U1.json |  17 +-
 ...PU High-Flow @U1 0.4 High Flow nozzle.json |  17 -
 ...PU High-Flow @U1 0.6 High Flow nozzle.json |  17 -
 ...PU High-Flow @U1 0.8 High Flow nozzle.json |  17 -
 .../filament/Snapmaker TPU High-Flow @U1.json |  12 +-
 .../Snapmaker U1 (0.2 High Flow nozzle).json  |  42 +-
 .../Snapmaker U1 (0.4 High Flow nozzle).json  |  42 +-
 .../Snapmaker U1 (0.6 High Flow nozzle).json  |  42 +-
 .../Snapmaker U1 (0.8 High Flow nozzle).json  |  42 +-
 .../Snapmaker/machine/Snapmaker U1.json       |   2 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  79 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...6 Standard @Snapmaker U1 (0.2 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...Extra Fine @Snapmaker U1 (0.4 nozzle).json |  71 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  79 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  90 ++-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...8 Standard @Snapmaker U1 (0.2 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  79 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...0 Standard @Snapmaker U1 (0.2 nozzle).json |  68 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  90 ++-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...2 Standard @Snapmaker U1 (0.2 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.2 High Flow nozzle).json |  23 -
 ...4 Standard @Snapmaker U1 (0.2 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  90 ++-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...16 Optimal @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...8 Standard @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...20 Quality @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...0 Standard @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...0 Standard @Snapmaker U1 (0.6 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...0 Strength @Snapmaker U1 (0.4 nozzle).json |  71 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...20 Support @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ... Support W @Snapmaker U1 (0.4 nozzle).json |  71 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...4 Standard @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 -
 ...4 Standard @Snapmaker U1 (0.8 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ....25 Benchy @Snapmaker U1 (0.4 nozzle).json | 144 +++-
 ... @Snapmaker U1 (0.4 High Flow nozzle).json |  23 -
 ...xtra Draft @Snapmaker U1 (0.4 nozzle).json |  70 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json |  72 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...0 Standard @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...0 Strength @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 -
 ...2 Standard @Snapmaker U1 (0.8 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...6 Standard @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...xtra Draft @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 -
 ...0 Standard @Snapmaker U1 (0.8 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.6 High Flow nozzle).json |  23 -
 ...2 Standard @Snapmaker U1 (0.6 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 -
 ...8 Standard @Snapmaker U1 (0.8 nozzle).json |  74 +-
 ... @Snapmaker U1 (0.8 High Flow nozzle).json |  23 -
 ...6 Standard @Snapmaker U1 (0.8 nozzle).json |  70 +-
 scripts/orca_profile_tool.py                  |  16 +-
 scripts/tests/test_profile_tool.py            |  26 +-
 .../OrcaSlicer_profile_validator.cpp          |   7 +
 src/libslic3r/PrintConfig.cpp                 |  13 +
 src/slic3r/GUI/ConfigManipulation.cpp         |  24 +-
 src/slic3r/GUI/ConfigManipulation.hpp         |   8 +-
 src/slic3r/GUI/Tab.cpp                        |  49 +-
 .../test_config_variant_expansion.cpp         |  90 +++
 363 files changed, 5067 insertions(+), 5441 deletions(-)
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
 create mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
 rename resources/profiles/Snapmaker/filament/{Snapmaker PETG HF @U1 0.4 High Flow nozzle.json => Snapmaker PETG HF @U1 0.4 nozzle.json} (54%)
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
 delete mode 100644 resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
 delete mode 100644 resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json

diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index c8e5b1dcc3..afe302529b 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.20",
+	"version": "02.04.00.21",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
@@ -194,10 +194,6 @@
 			"name": "fdm_process_idex",
 			"sub_path": "process/fdm_process_idex.json"
 		},
-		{
-			"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
 		{
 			"name": "fdm_process_U1_0.06_nozzle_0.2",
 			"sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json"
@@ -618,146 +614,6 @@
 			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
 			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json"
 		},
-		{
-			"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-			"sub_path": "process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json"
-		},
-		{
-			"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-			"sub_path": "process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
-		},
-		{
-			"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
-			"sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json"
-		},
-		{
-			"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-			"sub_path": "process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
-		},
-		{
-			"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-			"sub_path": "process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
-		},
-		{
-			"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-			"sub_path": "process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
-		},
-		{
-			"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-			"sub_path": "process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json"
-		},
-		{
-			"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
-		{
-			"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
-			"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json"
-		},
 		{
 			"name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
 			"sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
@@ -900,66 +756,6 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
-		{
-			"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json"
-		},
 		{
 			"name": "Fiberon PPS-GF20 @Snapmaker U1 base",
 			"sub_path": "filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1 base.json"
@@ -1653,8 +1449,8 @@
 			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json"
+			"name": "Snapmaker PETG HF @U1 0.4 nozzle",
+			"sub_path": "filament/Snapmaker PETG HF @U1 0.4 nozzle.json"
 		},
 		{
 			"name": "Snapmaker PETG HF @U1 0.6 nozzle",
@@ -1968,30 +1764,6 @@
 			"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
 			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json"
 		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json"
-		},
 		{
 			"name": "Snapmaker PLA-CF",
 			"sub_path": "filament/Snapmaker PLA-CF.json"
@@ -2072,30 +1844,6 @@
 			"name": "Snapmaker J1 TPU High-Flow",
 			"sub_path": "filament/Snapmaker J1 TPU High-Flow.json"
 		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json"
-		},
 		{
 			"name": "Snapmaker TPE @U1",
 			"sub_path": "filament/Snapmaker TPE @U1.json"
@@ -2116,174 +1864,6 @@
 			"name": "Snapmaker TPU",
 			"sub_path": "filament/Snapmaker TPU.json"
 		},
-		{
-			"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PET @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PETG @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker PETG @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA @U1 0.4 High Flow nozzle.json"
-		},
 		{
 			"name": "PolyLite Dual PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json"
@@ -2292,114 +1872,6 @@
 			"name": "PolyLite J1 PLA @0.2 nozzle",
 			"sub_path": "filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json"
 		},
-		{
-			"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker PLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json"
-		},
 		{
 			"name": "Snapmaker Dual PLA Eco",
 			"sub_path": "filament/Snapmaker Dual PLA Eco.json"
@@ -2436,50 +1908,6 @@
 			"name": "Snapmaker Breakaway Support @base",
 			"sub_path": "filament/Snapmaker Breakaway Support @base.json"
 		},
-		{
-			"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json"
-		},
 		{
 			"name": "Snapmaker Breakaway Support For PLA @U1",
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1.json"
@@ -2497,136 +1925,120 @@
 			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PETG @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PETG @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PETG @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PETG @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PETG @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Generic PETG @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PETG HF @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Generic PETG @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PETG @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PETG HF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PETG @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PETG @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PETG HF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PETG @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PETG @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PETG HF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG HF @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Generic PETG HF @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PETG-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PETG HF @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PETG-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PETG HF @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PETG-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PETG-CF @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PETG HF @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PLA @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PLA @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PLA @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PLA @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PLA @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Generic PLA @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PLA High Speed @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Generic PLA @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PLA @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PLA High Speed @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PLA @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PLA @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PLA High Speed @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PLA @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PLA @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PLA High Speed @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PLA Silk @U1 0.2 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.2 nozzle.json"
 		},
 		{
-			"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PLA Silk @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PLA Silk @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json"
+			"name": "Generic PLA Silk @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA Silk @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
-			"sub_path": "filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json"
+			"name": "Generic PLA-CF @U1 0.4 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json"
+			"name": "Generic PLA-CF @U1 0.6 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json"
+			"name": "Generic PLA-CF @U1 0.8 nozzle",
+			"sub_path": "filament/Generic PLA-CF @U1 0.8 nozzle.json"
 		},
 		{
-			"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json"
+			"name": "Generic TPU @U1 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.4 nozzle.json"
 		},
 		{
-			"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json"
+			"name": "Generic TPU @U1 0.6 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.6 nozzle.json"
 		},
 		{
-			"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json"
-		},
-		{
-			"name": "Generic TPU @U1 0.4 High Flow nozzle",
-			"sub_path": "filament/Generic TPU @U1 0.4 High Flow nozzle.json"
-		},
-		{
-			"name": "Generic TPU @U1 0.6 High Flow nozzle",
-			"sub_path": "filament/Generic TPU @U1 0.6 High Flow nozzle.json"
-		},
-		{
-			"name": "Generic TPU @U1 0.8 High Flow nozzle",
-			"sub_path": "filament/Generic TPU @U1 0.8 High Flow nozzle.json"
+			"name": "Generic TPU @U1 0.8 nozzle",
+			"sub_path": "filament/Generic TPU @U1 0.8 nozzle.json"
 		},
 		{
 			"name": "PolyTerra J1 PLA",
diff --git a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index dc60a89080..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon ASA-CF08 @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon ASA-CF08 @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon ASA-CF08 @Snapmaker U1",
-	"from": "system",
-	"setting_id": "b1SjanapSsHClohQ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon ASA-CF08 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index ca3a3615ec..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon PA12-CF10 @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon PA12-CF10 @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon PA12-CF10 @Snapmaker U1",
-	"from": "system",
-	"setting_id": "NSFnZepHnBOgrNpc",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA12-CF10 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index fdad376102..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon PA6-CF20 @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon PA6-CF20 @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon PA6-CF20 @Snapmaker U1",
-	"from": "system",
-	"setting_id": "qBf8pKCPs51wZX8h",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA6-CF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index bfb433d9d8..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon PA612-ESD @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon PA612-ESD @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon PA612-ESD @Snapmaker U1",
-	"from": "system",
-	"setting_id": "IE8AoNlftuKceK82",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA612-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 0712b95763..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon PETG-ESD @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon PETG-ESD @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon PETG-ESD @Snapmaker U1",
-	"from": "system",
-	"setting_id": "tBqwA6bzMZxINvhc",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Fiberon PETG-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index ae976bbde1..0000000000
--- a/resources/profiles/Snapmaker/filament/Fiberon PPS-GF20 @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Fiberon PPS-GF20 @U1 0.4 High Flow nozzle",
-	"inherits": "Fiberon PPS-GF20 @Snapmaker U1",
-	"from": "system",
-	"setting_id": "262BRaOSZLUidxzi",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PPS-GF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index b3774299ab..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @U1 0.2 High Flow nozzle",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "CyVMh4hZ5TrBb9Hl",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"1",
-		"1",
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json
new file mode 100644
index 0000000000..f993f4bbf7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.2 nozzle",
+	"renamed_from": "Generic PETG U1 0.2 nozzle;Generic PETG @U1 0.2 High Flow nozzle;Generic PETG U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "Iw7T4qqDf1fbSAa1",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"1"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 3d2d110ab8..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "AB6Lv3KHVfZ3F17I",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..4a04d39f7f
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.4 nozzle",
+	"renamed_from": "Generic PETG U1 0.4 nozzle;Generic PETG @U1 0.4 High Flow nozzle;Generic PETG U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "VHRa4TXU7HPz7Fld",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 4c39a6b53f..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "2wjxry91mFaUY5Kv",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..e1d6d82c6d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.6 nozzle",
+	"renamed_from": "Generic PETG U1 0.6 nozzle;Generic PETG @U1 0.6 High Flow nozzle;Generic PETG U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "Ubr8v7BTxiQMntVk",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 7700ec94a9..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "M5HDLQjQbdOYUkJc",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..368f9f4beb
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @U1 0.8 nozzle",
+	"renamed_from": "Generic PETG U1 0.8 nozzle;Generic PETG @U1 0.8 High Flow nozzle;Generic PETG U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG @System",
+	"from": "system",
+	"setting_id": "ro0mXCLzC5rY95oX",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"10",
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 7afbd3ad2f..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG HF @U1 0.2 High Flow nozzle",
-	"inherits": "Generic PETG HF @System",
-	"from": "system",
-	"setting_id": "hmfOc244iLZRjSxC",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"1",
-		"1",
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json
new file mode 100644
index 0000000000..7ef983ddb7
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.2 nozzle",
+	"renamed_from": "Generic PETG HF U1 0.2 nozzle;Generic PETG HF @U1 0.2 High Flow nozzle;Generic PETG HF U1 0.2 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "7yjLWAdcQe4ndo1z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"1"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 6e79495a5d..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG HF @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PETG HF @System",
-	"from": "system",
-	"setting_id": "QaYzwWA21nLkbeTd",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"16",
-		"16",
-		"16",
-		"16",
-		"16"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..1818f8dc9d
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.4 nozzle",
+	"renamed_from": "Generic PETG HF U1 0.4 nozzle;Generic PETG HF @U1 0.4 High Flow nozzle;Generic PETG HF U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "XWWLYZWkD9ZNRPeO",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index e2734fdbe7..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG HF @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PETG HF @System",
-	"from": "system",
-	"setting_id": "4FW7HsZg0GOFDyCr",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"16",
-		"16",
-		"16",
-		"16",
-		"16"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..d2f3c0a3af
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.6 nozzle",
+	"renamed_from": "Generic PETG HF U1 0.6 nozzle;Generic PETG HF @U1 0.6 High Flow nozzle;Generic PETG HF U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "1dj4JdFabSql3cEg",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 21c39efbb2..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG HF @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PETG HF @System",
-	"from": "system",
-	"setting_id": "DcwXjRYE21g1s7Gd",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"16",
-		"16",
-		"16",
-		"16",
-		"16"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..80c670da92
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG HF @U1 0.8 nozzle",
+	"renamed_from": "Generic PETG HF U1 0.8 nozzle;Generic PETG HF @U1 0.8 High Flow nozzle;Generic PETG HF U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG HF @System",
+	"from": "system",
+	"setting_id": "1LYZ0KG5kQtaOOKt",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"20",
+		"16"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index e1ebd81f1c..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG-CF @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PETG-CF @System",
-	"from": "system",
-	"setting_id": "xiruPdezF8sdAwJC",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"11",
-		"11",
-		"11",
-		"11",
-		"11",
-		"11"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..16d2301a0a
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.4 nozzle",
+	"renamed_from": "Generic PETG-CF U1 0.4 nozzle;Generic PETG-CF @U1 0.4 High Flow nozzle;Generic PETG-CF U1 0.4 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "wIKcBM1qLgzLEUJP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"11.5",
+		"11"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 0bc1021008..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG-CF @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PETG-CF @System",
-	"from": "system",
-	"setting_id": "edRC83pnDlkg8SYB",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..9cb77c98fd
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.6 nozzle",
+	"renamed_from": "Generic PETG-CF U1 0.6 nozzle;Generic PETG-CF @U1 0.6 High Flow nozzle;Generic PETG-CF U1 0.6 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "FvrnBiPbjSvIF3kN",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index acdb9f92c9..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG-CF @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PETG-CF @System",
-	"from": "system",
-	"setting_id": "mwzFh7n5O4sSVbdq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5",
-		"11.5"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..a18aca19e4
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic PETG-CF @U1 0.8 nozzle",
+	"renamed_from": "Generic PETG-CF U1 0.8 nozzle;Generic PETG-CF @U1 0.8 High Flow nozzle;Generic PETG-CF U1 0.8 High Flow nozzle",
+	"inherits": "Generic PETG-CF @System",
+	"from": "system",
+	"setting_id": "SCfvzDgUWkFHmbtP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 4c60340703..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @U1 0.2 High Flow nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "jOJzxhflMDXUSXP1",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"1.6",
-		"1.6",
-		"1.6",
-		"1.6",
-		"1.6",
-		"1.6"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json
new file mode 100644
index 0000000000..334be2020e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.2 nozzle",
+	"renamed_from": "Generic PLA U1 0.2 nozzle;Generic PLA @U1 0.2 High Flow nozzle;Generic PLA U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "8pb3tert1D4w0SKP",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"1.6"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 04f5b81b65..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "u6ZVj3bEGhEScBAn",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..e37b2d5a25
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.4 nozzle",
+	"renamed_from": "Generic PLA U1 0.4 nozzle;Generic PLA @U1 0.4 High Flow nozzle;Generic PLA U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "Uilm8oVmZzyxE3ba",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index e9cd941ccb..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "3rI0eWUn62OqztwD",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..8524f17c21
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.6 nozzle",
+	"renamed_from": "Generic PLA U1 0.6 nozzle;Generic PLA @U1 0.6 High Flow nozzle;Generic PLA U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "aj4G9OSdgtQPqpkI",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 0df240dcd0..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "Ca1ysi9BTj3SmRnf",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..f4887a84ca
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @U1 0.8 nozzle",
+	"renamed_from": "Generic PLA U1 0.8 nozzle;Generic PLA @U1 0.8 High Flow nozzle;Generic PLA U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA @System",
+	"from": "system",
+	"setting_id": "zom29gBgIZmvjFmh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 228901f1cf..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA High Speed @U1 0.2 High Flow nozzle",
-	"inherits": "Generic PLA High Speed @System",
-	"from": "system",
-	"setting_id": "H45bzmFIJs2jcRxK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json
new file mode 100644
index 0000000000..fe3a8c5886
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.2 nozzle",
+	"renamed_from": "Generic PLA High Speed U1 0.2 nozzle;Generic PLA High Speed @U1 0.2 High Flow nozzle;Generic PLA High Speed U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "rT8e5f81vwUpwPuq",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"2"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index e016e53d1a..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA High Speed @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PLA High Speed @System",
-	"from": "system",
-	"setting_id": "rNAH84Cth3UXfID4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18",
-		"18",
-		"18",
-		"18",
-		"18"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..31fbc7174c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.4 nozzle",
+	"renamed_from": "Generic PLA High Speed U1 0.4 nozzle;Generic PLA High Speed @U1 0.4 High Flow nozzle;Generic PLA High Speed U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "ZUetX0WveqW8fy6f",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 348db5014d..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA High Speed @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PLA High Speed @System",
-	"from": "system",
-	"setting_id": "1fXum9hyhX2CXp84",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18",
-		"18",
-		"18",
-		"18",
-		"18"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..bb910121f9
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.6 nozzle",
+	"renamed_from": "Generic PLA High Speed U1 0.6 nozzle;Generic PLA High Speed @U1 0.6 High Flow nozzle;Generic PLA High Speed U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "y2WY6qLA3xKZM1Mm",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index f377e30f7b..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA High Speed @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PLA High Speed @System",
-	"from": "system",
-	"setting_id": "DEHdvXmDRZ4klSfG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18",
-		"18",
-		"18",
-		"18",
-		"18"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..45c7bbda54
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA High Speed @U1 0.8 nozzle",
+	"renamed_from": "Generic PLA High Speed U1 0.8 nozzle;Generic PLA High Speed @U1 0.8 High Flow nozzle;Generic PLA High Speed U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA High Speed @System",
+	"from": "system",
+	"setting_id": "VwXJrdwxvzjlIGal",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 53fc87bb9b..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA Silk @U1 0.2 High Flow nozzle",
-	"inherits": "Generic PLA Silk @System",
-	"from": "system",
-	"setting_id": "rgP9xBiJi6jtTGe6",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json
new file mode 100644
index 0000000000..4f8a43e43e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.2 nozzle",
+	"renamed_from": "Generic PLA Silk U1 0.2 nozzle;Generic PLA Silk @U1 0.2 High Flow nozzle;Generic PLA Silk U1 0.2 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "381SJIDBre8HxHy2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"7.5",
+		"2"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 980840da51..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA Silk @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PLA Silk @System",
-	"from": "system",
-	"setting_id": "wKeFBUbXAh371HJc",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..36bb9d7b4e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.4 nozzle",
+	"renamed_from": "Generic PLA Silk U1 0.4 nozzle;Generic PLA Silk @U1 0.4 High Flow nozzle;Generic PLA Silk U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "Fd1g9OdeM3pUx8f5",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index d3e0aced6d..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA Silk @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PLA Silk @System",
-	"from": "system",
-	"setting_id": "PoZUUozGNqKXDY6j",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..8981c44ce1
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.6 nozzle",
+	"renamed_from": "Generic PLA Silk U1 0.6 nozzle;Generic PLA Silk @U1 0.6 High Flow nozzle;Generic PLA Silk U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "8rhmpBFmMj9vVZwG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 450b030227..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA Silk @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PLA Silk @System",
-	"from": "system",
-	"setting_id": "lSxapFINSYnT0jU5",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5",
-		"7.5"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..ec2669e3ff
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic PLA Silk @U1 0.8 nozzle",
+	"renamed_from": "Generic PLA Silk U1 0.8 nozzle;Generic PLA Silk @U1 0.8 High Flow nozzle;Generic PLA Silk U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA Silk @System",
+	"from": "system",
+	"setting_id": "Fo7U7GYHZh1aZPLs",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 07af2d1a24..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA-CF @U1 0.4 High Flow nozzle",
-	"inherits": "Generic PLA-CF @System",
-	"from": "system",
-	"setting_id": "LumAEUgsSqWvQcnD",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..6fcd474adc
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.4 nozzle",
+	"renamed_from": "Generic PLA-CF U1 0.4 nozzle;Generic PLA-CF @U1 0.4 High Flow nozzle;Generic PLA-CF U1 0.4 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "6AWubtDE4PqrKVNJ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index aa2ae79dc5..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA-CF @U1 0.6 High Flow nozzle",
-	"inherits": "Generic PLA-CF @System",
-	"from": "system",
-	"setting_id": "cbQkQEdl7ZZySWyb",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..13a94cd20c
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.6 nozzle",
+	"renamed_from": "Generic PLA-CF U1 0.6 nozzle;Generic PLA-CF @U1 0.6 High Flow nozzle;Generic PLA-CF U1 0.6 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "AvM44HgMCkOCnmzY",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index ddeec0f5bd..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA-CF @U1 0.8 High Flow nozzle",
-	"inherits": "Generic PLA-CF @System",
-	"from": "system",
-	"setting_id": "w2R1GQrrewIaFigA",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..f763ce696e
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json	
@@ -0,0 +1,23 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @U1 0.8 nozzle",
+	"renamed_from": "Generic PLA-CF U1 0.8 nozzle;Generic PLA-CF @U1 0.8 High Flow nozzle;Generic PLA-CF U1 0.8 High Flow nozzle",
+	"inherits": "Generic PLA-CF @System",
+	"from": "system",
+	"setting_id": "tvYAUvQEbbdBCIg2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 83ff889f31..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic TPU @U1 0.4 High Flow nozzle",
-	"inherits": "Generic TPU @System",
-	"from": "system",
-	"setting_id": "a1T45jY9dw7cvXT9",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json
new file mode 100644
index 0000000000..b840b579cd
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.4 nozzle",
+	"renamed_from": "Generic TPU U1 0.4 nozzle;Generic TPU @U1 0.4 High Flow nozzle;Generic TPU U1 0.4 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "9d0jRdMgkPMahYL7",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index cd745b81b6..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic TPU @U1 0.6 High Flow nozzle",
-	"inherits": "Generic TPU @System",
-	"from": "system",
-	"setting_id": "bHQSXsU5JQW91pkB",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json
new file mode 100644
index 0000000000..de956528f3
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.6 nozzle",
+	"renamed_from": "Generic TPU U1 0.6 nozzle;Generic TPU @U1 0.6 High Flow nozzle;Generic TPU U1 0.6 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "LLjEPSU4l09N3Zb8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 589302d895..0000000000
--- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,22 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic TPU @U1 0.8 High Flow nozzle",
-	"inherits": "Generic TPU @System",
-	"from": "system",
-	"setting_id": "FnByDNEkW6W6FR63",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2",
-		"3.2"
-	],
-	"filament_notes": [
-		"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json
new file mode 100644
index 0000000000..4d1b48e333
--- /dev/null
+++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+	"type": "filament",
+	"name": "Generic TPU @U1 0.8 nozzle",
+	"renamed_from": "Generic TPU U1 0.8 nozzle;Generic TPU @U1 0.8 High Flow nozzle;Generic TPU U1 0.8 High Flow nozzle",
+	"inherits": "Generic TPU @System",
+	"from": "system",
+	"setting_id": "Wfhd3jLEjSKzCeHE",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
+}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index d0bccc66e1..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma CoPE @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma CoPE @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma CoPE @Snapmaker U1",
-	"from": "system",
-	"setting_id": "nBvDgnN3J4k3Uytq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma CoPE @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 783dea1078..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "U5ss8ZIjm3fIz1Nq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 9b0df8dd59..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Celestial @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Celestial @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Celestial @Snapmaker U1",
-	"from": "system",
-	"setting_id": "R81OCOp3l7L8B8fJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Celestial @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 4eb0005363..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Galaxy @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Galaxy @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Galaxy @Snapmaker U1",
-	"from": "system",
-	"setting_id": "fS50UtV6RhVtB4uP",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 57f7e80c9c..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Glow @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Glow @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Glow @Snapmaker U1",
-	"from": "system",
-	"setting_id": "JCgz8jS9LuwdaBl1",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index e892c5c2f7..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Luminous @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Luminous @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Luminous @Snapmaker U1",
-	"from": "system",
-	"setting_id": "K5a28HOfNIVohTxH",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index d9f9f9c419..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Marble @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Marble @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Marble @Snapmaker U1",
-	"from": "system",
-	"setting_id": "iXtNnANcE9HjT8nn",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 145f766ce9..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Matte @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Matte @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Matte @Snapmaker U1",
-	"from": "system",
-	"setting_id": "c9CmXJsBkThq39c6",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Matte @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b54b291bdd..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Metallic @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Metallic @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Metallic @Snapmaker U1",
-	"from": "system",
-	"setting_id": "KQ2nKfjxSAroQBJq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index da0389bdc7..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Neon @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Neon @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Neon @Snapmaker U1",
-	"from": "system",
-	"setting_id": "9fYw7eMrJBaA00at",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 2f705909e8..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Satin @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Satin @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Satin @Snapmaker U1",
-	"from": "system",
-	"setting_id": "PRlG1wqgh0KI7fuT",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Satin @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 9553afb7e3..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Silk @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Silk @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Silk @Snapmaker U1",
-	"from": "system",
-	"setting_id": "EXLntLMjWCfwg2Wc",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Panchroma PLA Silk @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 4d8310a6c3..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Starlight @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Starlight @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Starlight @Snapmaker U1",
-	"from": "system",
-	"setting_id": "4QxRxMj60hcFxdJL",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 5cefff25f1..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Temp Shift @Snapmaker U1",
-	"from": "system",
-	"setting_id": "HDp1DlQLCfSKhaNx",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Temp Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 45102a7a19..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA Translucent @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA Translucent @Snapmaker U1",
-	"from": "system",
-	"setting_id": "4ZTw1XHqwI7QjEfR",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index d252f70921..0000000000
--- a/resources/profiles/Snapmaker/filament/Panchroma PLA UV Shift @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Panchroma PLA UV Shift @U1 0.4 High Flow nozzle",
-	"inherits": "Panchroma PLA UV Shift @Snapmaker U1",
-	"from": "system",
-	"setting_id": "0pFMgeH7aowERZoU",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA UV Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 7af0ba9b3a..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite CosPLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite CosPLA @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite CosPLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "iZqJvDu4xfgIBrpm",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite CosPLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index cc4623a7cd..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PETG @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PETG @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PETG @Snapmaker U1",
-	"from": "system",
-	"setting_id": "fCNkJQO5skF4ZJcJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f0b3f91f49..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PETG Translucent @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PETG Translucent @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PETG Translucent @Snapmaker U1",
-	"from": "system",
-	"setting_id": "polhiSJb82UYZObE",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 3d3a9bef72..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "AUKAVbKch9zjmuKG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 3836e62d5e..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Galaxy @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Galaxy @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Galaxy @Snapmaker U1",
-	"from": "system",
-	"setting_id": "hncpZTWfBmfoUaCq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f73ede7b25..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Glow @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Glow @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Glow @Snapmaker U1",
-	"from": "system",
-	"setting_id": "DUuZDzjm3bmNBKSA",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 2ab15e9fd2..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Luminous @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Luminous @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Luminous @Snapmaker U1",
-	"from": "system",
-	"setting_id": "Mv5E1GpGrdHVF2Vs",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 51d1010112..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Neon @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Neon @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Neon @Snapmaker U1",
-	"from": "system",
-	"setting_id": "3HWUcpQIJsnxWDp7",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 9b250dfb98..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Pro @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Pro @Snapmaker U1",
-	"from": "system",
-	"setting_id": "mOax5GeAHVzqs4zL",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index fbfb23ac4b..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Pro Metallic @Snapmaker U1",
-	"from": "system",
-	"setting_id": "Vm5ydb09RSgfd1a8",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index e1502b10de..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Starlight @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Starlight @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Starlight @Snapmaker U1",
-	"from": "system",
-	"setting_id": "urJVmseOC2Px1qIW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index c44e1bb633..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyLite PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyLite PLA Translucent @U1 0.4 High Flow nozzle",
-	"inherits": "PolyLite PLA Translucent @Snapmaker U1",
-	"from": "system",
-	"setting_id": "jCgyYlatUD3jfQXS",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 454b86d711..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyTerra PLA @U1 0.4 High Flow nozzle",
-	"inherits": "PolyTerra PLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "MTZ6N0HHdSwkoysG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 4bfbd99b94..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA Marble @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyTerra PLA Marble @U1 0.4 High Flow nozzle",
-	"inherits": "PolyTerra PLA Marble @Snapmaker U1",
-	"from": "system",
-	"setting_id": "uQFqbcqaSTrlM52u",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 20cb320ec8..0000000000
--- a/resources/profiles/Snapmaker/filament/PolyTerra PLA+ @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "PolyTerra PLA+ @U1 0.4 High Flow nozzle",
-	"inherits": "PolyTerra PLA+ @Snapmaker U1",
-	"from": "system",
-	"setting_id": "ckmc2jbEBO6kAfXn",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA+ @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 22401d9ca5..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker General PLA Family @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker General PLA Family @U1",
-	"from": "system",
-	"setting_id": "lTLCaycZyEv7ATPu",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json
index 0e743d7aee..171523998a 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Polymaker General PLA Family @U1",
+	"renamed_from": "Polymaker General PLA Family U1;Polymaker General PLA Family @U1 0.4 High Flow nozzle;Polymaker General PLA Family U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "thXfSaUkOAKJ50ey",
 	"filament_id": "OF44ERDr",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
 		"0"
@@ -29,5 +31,12 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index d6d336c3e0..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker HT-PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker HT-PLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "YB5Tzz4hghtQ6Iha",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 0d76705426..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker HT-PLA-GF @Snapmaker U1",
-	"from": "system",
-	"setting_id": "XTfLaJ4pTpmfYOHK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA-GF @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f2b8f17ca2..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker PETG @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PETG @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker PETG @Snapmaker U1",
-	"from": "system",
-	"setting_id": "7RmkAZ1MMkUK4UFe",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index afc5f6a361..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker PETG Galaxy @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PETG Galaxy @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker PETG Galaxy @Snapmaker U1",
-	"from": "system",
-	"setting_id": "cBNSP4FfKq94BuWn",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b411e8960a..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker PLA @Snapmaker U1",
-	"from": "system",
-	"setting_id": "N99CwtkZbVeE9ZoP",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Polymaker PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 0c98d9a7ee..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PLA Pro @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker PLA Pro @Snapmaker U1",
-	"from": "system",
-	"setting_id": "Npw7PdfMi3qIDuIY",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b027a554b2..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker PLA Pro Metallic @Snapmaker U1",
-	"from": "system",
-	"setting_id": "YBy6gtPvOWIYchuS",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 0c9dfe4271..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker Silk PLA Family @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker Silk PLA Family @U1",
-	"from": "system",
-	"setting_id": "diMNPKgSPiNmv0EG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json
index 990cc483f3..aa8d9de628 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Polymaker Silk PLA Family @U1",
+	"renamed_from": "Polymaker Silk PLA Family U1;Polymaker Silk PLA Family @U1 0.4 High Flow nozzle;Polymaker Silk PLA Family U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "h8vIYpXbxFtHPV6e",
 	"filament_id": "OFH57ibH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_density": [
 		"1.34"
@@ -29,5 +31,12 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 2eac1cc0c2..0000000000
--- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Polymaker Tough PLA Family @U1 0.4 High Flow nozzle",
-	"inherits": "Polymaker Tough PLA Family @U1",
-	"from": "system",
-	"setting_id": "tFHtV4suxKdRifWW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json
index 1dad000fb2..b3ce7b53ea 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Polymaker Tough PLA Family @U1",
+	"renamed_from": "Polymaker Tough PLA Family U1;Polymaker Tough PLA Family @U1 0.4 High Flow nozzle;Polymaker Tough PLA Family U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "d6CC81Es2hp46bto",
 	"filament_id": "OFgdaBOt",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_density": [
 		"1.23"
@@ -29,5 +31,12 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json
index b38925e01b..7117c25419 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json	
@@ -1,17 +1,26 @@
 {
 	"type": "filament",
 	"name": "Fiberon ASA-CF08 @Snapmaker U1",
+	"renamed_from": "Fiberon ASA-CF08 Snapmaker U1;Fiberon ASA-CF08 @U1 0.4 High Flow nozzle;Fiberon ASA-CF08 U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon ASA-CF08 @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "CdgDze2g0J4T7FEP",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"pressure_advance": [
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon ASA-CF08 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json
index 1bb569c291..326c972bcb 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Fiberon PA12-CF10 @Snapmaker U1",
+	"renamed_from": "Fiberon PA12-CF10 Snapmaker U1;Fiberon PA12-CF10 @U1 0.4 High Flow nozzle;Fiberon PA12-CF10 U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon PA12-CF10 @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "x3irDyMqwMgklHKg",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -22,5 +24,12 @@
 	],
 	"pressure_advance": [
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA12-CF10 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json
index d6106faa50..3a825179b0 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Fiberon PA6-CF20 @Snapmaker U1",
+	"renamed_from": "Fiberon PA6-CF20 Snapmaker U1;Fiberon PA6-CF20 @U1 0.4 High Flow nozzle;Fiberon PA6-CF20 U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon PA6-CF20 @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "AMQyOXYNdWpVXmvK",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -22,5 +24,12 @@
 	],
 	"pressure_advance": [
 		"0.08"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA6-CF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json
index 660f4e9ef2..444a3ca35e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Fiberon PA612-ESD @Snapmaker U1",
+	"renamed_from": "Fiberon PA612-ESD Snapmaker U1;Fiberon PA612-ESD @U1 0.4 High Flow nozzle;Fiberon PA612-ESD U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon PA612-ESD @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "hUvnA3XmuC3bGLsi",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -20,5 +22,12 @@
 	"description": " ",
 	"enable_pressure_advance": [
 		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA612-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json
index 6e1797904c..91a8ccb00f 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Fiberon PETG-ESD @Snapmaker U1",
+	"renamed_from": "Fiberon PETG-ESD Snapmaker U1;Fiberon PETG-ESD @U1 0.4 High Flow nozzle;Fiberon PETG-ESD U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon PETG-ESD @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "AUr4Bm6UMW8S9TBh",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -19,5 +21,12 @@
 	],
 	"pressure_advance": [
 		"0.04"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Fiberon PETG-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json
index 4f1a9fdc10..f67bf3a3eb 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json	
@@ -1,15 +1,24 @@
 {
 	"type": "filament",
 	"name": "Fiberon PPS-GF20 @Snapmaker U1",
+	"renamed_from": "Fiberon PPS-GF20 Snapmaker U1;Fiberon PPS-GF20 @U1 0.4 High Flow nozzle;Fiberon PPS-GF20 U1 0.4 High Flow nozzle",
 	"inherits": "Fiberon PPS-GF20 @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "7IpyPFHEAOmFlINJ",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-	"description": " "
+	"description": " ",
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PPS-GF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json
index 1ad0f0d820..7c25b29e99 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma CoPE @Snapmaker U1",
-	"renamed_from": "Panchroma CoPE @U1",
+	"renamed_from": "Panchroma CoPE @U1;Panchroma CoPE @U1 0.4 High Flow nozzle;Panchroma CoPE U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma CoPE @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "gI7fRuITm0XhElnG",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma CoPE @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json
index dcd84aeba9..acf326d5ca 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json	
@@ -1,18 +1,26 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA @Snapmaker U1",
-	"renamed_from": "Panchroma PLA @U1",
+	"renamed_from": "Panchroma PLA @U1;Panchroma PLA @U1 0.4 High Flow nozzle;Panchroma PLA U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "ayBhax9ELaiKfGFt",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_wipe": [
 		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json
index 561c748be3..95806c4ce0 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Celestial @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Celestial @U1",
+	"renamed_from": "Panchroma PLA Celestial @U1;Panchroma PLA Celestial @U1 0.4 High Flow nozzle;Panchroma PLA Celestial U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Celestial @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "OVmWNHpQnLZ67Bxd",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Celestial @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json
index fee27dc997..b52c629427 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Galaxy @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Galaxy @U1",
+	"renamed_from": "Panchroma PLA Galaxy @U1;Panchroma PLA Galaxy @U1 0.4 High Flow nozzle;Panchroma PLA Galaxy U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Galaxy @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "FLECN8LIZ5RLgQGi",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json
index 2f1135de61..2b8b9df26f 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Glow @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Glow @U1",
+	"renamed_from": "Panchroma PLA Glow @U1;Panchroma PLA Glow @U1 0.4 High Flow nozzle;Panchroma PLA Glow U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Glow @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "YEf4HFNPNtoFoLJd",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json
index fd701bf8c3..c508d2e50c 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Luminous @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Luminous @U1",
+	"renamed_from": "Panchroma PLA Luminous @U1;Panchroma PLA Luminous @U1 0.4 High Flow nozzle;Panchroma PLA Luminous U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Luminous @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "bxbXVqsMWWNfWcAn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json
index 2a1dbab936..984c8f7a48 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Marble @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Marble @U1",
+	"renamed_from": "Panchroma PLA Marble @U1;Panchroma PLA Marble @U1 0.4 High Flow nozzle;Panchroma PLA Marble U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Marble @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "P9wE2kZSR2Coq1K7",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json
index 7652606816..b5a5b1a864 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Matte @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Matte @U1",
+	"renamed_from": "Panchroma PLA Matte @U1;Panchroma PLA Matte @U1 0.4 High Flow nozzle;Panchroma PLA Matte U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Matte @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "0oJUzBq7iYJgJxZ7",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Matte @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json
index fe8e68081c..aa0406c856 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Metallic @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Metallic @U1",
+	"renamed_from": "Panchroma PLA Metallic @U1;Panchroma PLA Metallic @U1 0.4 High Flow nozzle;Panchroma PLA Metallic U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Metallic @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "pAQGZzMH04kst11B",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json
index cf16cb95c9..a9d9770510 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Neon @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Neon @U1",
+	"renamed_from": "Panchroma PLA Neon @U1;Panchroma PLA Neon @U1 0.4 High Flow nozzle;Panchroma PLA Neon U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Neon @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "qVG9q2ci7Cj4pM5c",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json
index eff77a2aa9..549ba39107 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Satin @U1",
+	"renamed_from": "Panchroma PLA Satin @U1;Panchroma PLA Satin @U1 0.4 High Flow nozzle;Panchroma PLA Satin U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Satin @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "EHMn3LsbZlfuR7hD",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Satin @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json
index 1020a48f0a..c6f550e1da 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Silk @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Silk @U1",
+	"renamed_from": "Panchroma PLA Silk @U1;Panchroma PLA Silk @U1 0.4 High Flow nozzle;Panchroma PLA Silk U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Silk @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "JfIg6ZkVFA0CKLFI",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Panchroma PLA Silk @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json
index 114391b517..9882801891 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Starlight @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Starlight @U1",
+	"renamed_from": "Panchroma PLA Starlight @U1;Panchroma PLA Starlight @U1 0.4 High Flow nozzle;Panchroma PLA Starlight U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Starlight @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "pgcdQlQmPFSaduVr",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json
index ca50194577..eaf3d61871 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json	
@@ -1,27 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Temp Shift @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Temp Shift @U1",
+	"renamed_from": "Panchroma PLA Temp Shift @U1;Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle;Panchroma PLA Temp Shift U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Temp Shift @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "SJq26RGx7OoZB4uH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"slow_down_layer_time": [
 		"4"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Temp Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json
index cff9ec2011..e5b728ce12 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Translucent @Snapmaker U1",
-	"renamed_from": "Panchroma PLA Translucent @U1",
+	"renamed_from": "Panchroma PLA Translucent @U1;Panchroma PLA Translucent @U1 0.4 High Flow nozzle;Panchroma PLA Translucent U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA Translucent @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "CBt541HVuOa7GGb9",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json
index 1d4a6a0bbe..af9b765442 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA UV Shift @Snapmaker U1",
-	"renamed_from": "Panchroma PLA UV Shift @U1",
+	"renamed_from": "Panchroma PLA UV Shift @U1;Panchroma PLA UV Shift @U1 0.4 High Flow nozzle;Panchroma PLA UV Shift U1 0.4 High Flow nozzle",
 	"inherits": "Panchroma PLA UV Shift @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "vfVlN8IokcNnixsV",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA UV Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json
index 836723cf7a..ac28cfb242 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite CosPLA @Snapmaker U1",
+	"renamed_from": "PolyLite CosPLA Snapmaker U1;PolyLite CosPLA @U1 0.4 High Flow nozzle;PolyLite CosPLA U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite CosPLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "KwD7WDyJNa4hWfZ8",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite CosPLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json
index f51cc5eeec..e52f876805 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "PolyLite PETG @Snapmaker U1",
+	"renamed_from": "PolyLite PETG Snapmaker U1;PolyLite PETG @U1 0.4 High Flow nozzle;PolyLite PETG U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PETG @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "U9U4YmaRxgIdxQOc",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -19,5 +21,12 @@
 	],
 	"pressure_advance": [
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json
index a3efeee371..4702dd7ec9 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "PolyLite PETG Translucent @Snapmaker U1",
+	"renamed_from": "PolyLite PETG Translucent Snapmaker U1;PolyLite PETG Translucent @U1 0.4 High Flow nozzle;PolyLite PETG Translucent U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PETG Translucent @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "NBQOZiQQ8MpcDnLM",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -19,5 +21,12 @@
 	],
 	"pressure_advance": [
 		"0.05"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json
index 715d8060e4..00beebd0af 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA @Snapmaker U1",
-	"renamed_from": "PolyLite PLA @U1",
+	"renamed_from": "PolyLite PLA @U1;PolyLite PLA @U1 0.4 High Flow nozzle;PolyLite PLA U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "RtK3uYFG0OKtnLkP",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json
index e096b1b9b3..ee939ec23d 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Galaxy @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Galaxy Snapmaker U1;PolyLite PLA Galaxy @U1 0.4 High Flow nozzle;PolyLite PLA Galaxy U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Galaxy @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "mNMTe346QAgo61NH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json
index a36d2b9de5..0a35b4a645 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Glow @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Glow Snapmaker U1;PolyLite PLA Glow @U1 0.4 High Flow nozzle;PolyLite PLA Glow U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Glow @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "xYjGzOzWWE2PBfNd",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json
index 874004e6ea..978da7ad66 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Luminous @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Luminous Snapmaker U1;PolyLite PLA Luminous @U1 0.4 High Flow nozzle;PolyLite PLA Luminous U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Luminous @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "pcPG6yUSO8F0e4gM",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json
index fbbb2a4585..ade31d33e1 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Neon @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Neon Snapmaker U1;PolyLite PLA Neon @U1 0.4 High Flow nozzle;PolyLite PLA Neon U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Neon @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "WMoh0mKVmVsdP5rc",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json
index 47163a788c..ac90bd96e1 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json	
@@ -1,27 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Pro @Snapmaker U1",
-	"renamed_from": "PolyLite PLA Pro @U1",
+	"renamed_from": "PolyLite PLA Pro @U1;PolyLite PLA Pro @U1 0.4 High Flow nozzle;PolyLite PLA Pro U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Pro @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "GxuEzTdHffrvh2q6",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"slow_down_layer_time": [
 		"4"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json
index b1611b961d..cabbbe92b2 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Pro Metallic @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Pro Metallic Snapmaker U1;PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle;PolyLite PLA Pro Metallic U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Pro Metallic @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "21wjCLo6hOb9p38K",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_end_gcode": [
 		"; filament end gcode \n\n"
@@ -26,5 +28,12 @@
 	],
 	"enable_pressure_advance": [
 		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json
index 56108cfed2..e6ad43c92e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Starlight @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Starlight Snapmaker U1;PolyLite PLA Starlight @U1 0.4 High Flow nozzle;PolyLite PLA Starlight U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Starlight @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "geXEuSvWTJD0rK7F",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json
index 799e272fab..b87989cbdf 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyLite PLA Translucent @Snapmaker U1",
+	"renamed_from": "PolyLite PLA Translucent Snapmaker U1;PolyLite PLA Translucent @U1 0.4 High Flow nozzle;PolyLite PLA Translucent U1 0.4 High Flow nozzle",
 	"inherits": "PolyLite PLA Translucent @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "YpMLpguxd61Bs16O",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json
index 244cf91471..d56607a1a3 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyTerra PLA @Snapmaker U1",
-	"renamed_from": "PolyTerra PLA @U1",
+	"renamed_from": "PolyTerra PLA @U1;PolyTerra PLA @U1 0.4 High Flow nozzle;PolyTerra PLA U1 0.4 High Flow nozzle",
 	"inherits": "PolyTerra PLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "kyxayLqRGrKKBwqp",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json
index 19e419ca36..0799e6c74d 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyTerra PLA Marble @Snapmaker U1",
+	"renamed_from": "PolyTerra PLA Marble Snapmaker U1;PolyTerra PLA Marble @U1 0.4 High Flow nozzle;PolyTerra PLA Marble U1 0.4 High Flow nozzle",
 	"inherits": "PolyTerra PLA Marble @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "VjVt04nDFS9l9Rl9",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json
index c3dd9d5537..ee62d23187 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "PolyTerra PLA+ @Snapmaker U1",
+	"renamed_from": "PolyTerra PLA+ Snapmaker U1;PolyTerra PLA+ @U1 0.4 High Flow nozzle;PolyTerra PLA+ U1 0.4 High Flow nozzle",
 	"inherits": "PolyTerra PLA+ @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "5L213op8PhcYpqiF",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA+ @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json
index ef631e550b..3e13b97060 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Polymaker HT-PLA @Snapmaker U1",
-	"renamed_from": "Polymaker HT-PLA @U1",
+	"renamed_from": "Polymaker HT-PLA @U1;Polymaker HT-PLA @U1 0.4 High Flow nozzle;Polymaker HT-PLA U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker HT-PLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "0A5ETOrUTF0P3HS4",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json
index ac49e4f7ac..8e1bd2f65e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json	
@@ -1,15 +1,23 @@
 {
 	"type": "filament",
 	"name": "Polymaker HT-PLA-GF @Snapmaker U1",
-	"renamed_from": "Polymaker HT-PLA-GF @U1",
+	"renamed_from": "Polymaker HT-PLA-GF @U1;Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle;Polymaker HT-PLA-GF U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker HT-PLA-GF @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "i0LA17aaWvgLG7xd",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA-GF @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json
index a3e11c2cd2..18a738484f 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Polymaker PETG @Snapmaker U1",
+	"renamed_from": "Polymaker PETG Snapmaker U1;Polymaker PETG @U1 0.4 High Flow nozzle;Polymaker PETG U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PETG @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "kS4t66kFCXtambwx",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -16,5 +18,12 @@
 	],
 	"supertack_plate_temp_initial_layer": [
 		"70"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json
index ecac971c5e..b5c48df24e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Polymaker PETG Galaxy @Snapmaker U1",
+	"renamed_from": "Polymaker PETG Galaxy Snapmaker U1;Polymaker PETG Galaxy @U1 0.4 High Flow nozzle;Polymaker PETG Galaxy U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PETG Galaxy @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "a5yZ1QlqIGEAW1sU",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -16,5 +18,12 @@
 	],
 	"supertack_plate_temp_initial_layer": [
 		"70"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json
index ff614bc79f..b8fb82ab72 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json	
@@ -1,20 +1,26 @@
 {
 	"type": "filament",
 	"name": "Polymaker PLA @Snapmaker U1",
+	"renamed_from": "Polymaker PLA Snapmaker U1;Polymaker PLA @U1 0.4 High Flow nozzle;Polymaker PLA U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "NSuD5f5eVr8SHA4n",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"pressure_advance": [
 		"0.05"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Polymaker PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json
index d5823b53a6..d7b220df0f 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "Polymaker PLA Pro @Snapmaker U1",
+	"renamed_from": "Polymaker PLA Pro Snapmaker U1;Polymaker PLA Pro @U1 0.4 High Flow nozzle;Polymaker PLA Pro U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA Pro @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "0iJ5qjVvmrkRzpZD",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json
index a26fb437e7..7d9b34cd04 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json	
@@ -1,14 +1,23 @@
 {
 	"type": "filament",
 	"name": "Polymaker PLA Pro Metallic @Snapmaker U1",
+	"renamed_from": "Polymaker PLA Pro Metallic Snapmaker U1;Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle;Polymaker PLA Pro Metallic U1 0.4 High Flow nozzle",
 	"inherits": "Polymaker PLA Pro Metallic @Snapmaker U1 base",
 	"from": "system",
 	"setting_id": "s4F24JmyDykNvtAV",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index fb361728c6..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,50 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker ABS @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker ABS @U1",
-	"from": "system",
-	"setting_id": "23BA0fe1OoCgoHAe",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"22"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"30"
-	],
-	"filament_multitool_ramming_volume": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"0.2"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"nozzle_temperature": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"280"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json
index fe6c59ba80..2a4346cc5d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json	
@@ -1,14 +1,70 @@
 {
 	"type": "filament",
 	"name": "Snapmaker ABS @U1",
+	"renamed_from": "Snapmaker ABS U1;Snapmaker ABS @U1 0.4 High Flow nozzle;Snapmaker ABS U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker ABS @U1 base",
 	"from": "system",
 	"setting_id": "UFMRgwmOOQhOa3kB",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_retract_length_toolchange": [
 		"5"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0",
+		"15"
+	],
+	"fan_max_speed": [
+		"15",
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"280"
+	],
+	"nozzle_temperature": [
+		"260",
+		"280"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"5"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"filament_retraction_length": [
+		"0.6",
+		"0.2"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"22"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"30"
+	],
+	"fan_min_speed": [
+		"15",
+		"10"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f8c91285b6..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,20 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker ABS Benchy @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker ABS Benchy @U1",
-	"from": "system",
-	"setting_id": "TI7PLhJrI5VSiYtg",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"31"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 31 mm^3/s, from local standard fallback preset Snapmaker ABS Benchy @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"compatible_prints": [
-		"0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json
index 1ba6c22c9a..47460e4c92 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker ABS Benchy @U1",
+	"renamed_from": "Snapmaker ABS Benchy U1;Snapmaker ABS Benchy @U1 0.4 High Flow nozzle;Snapmaker ABS Benchy U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker ABS @U1 base",
 	"from": "system",
 	"setting_id": "xszx4XRGrp88OdP8",
 	"filament_id": "OFJrvXth",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"compatible_prints": [
 		"0.25 Benchy @Snapmaker U1 (0.4 nozzle)"
@@ -59,5 +61,12 @@
 	],
 	"default_filament_colour": [
 		""
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 31 mm^3/s, from local standard fallback preset Snapmaker ABS Benchy @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b5609dc056..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,50 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker ASA @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker ASA @U1",
-	"from": "system",
-	"setting_id": "UlxZs1Ey16Ic8TO8",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"fan_max_speed": [
-		"25"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"22"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"20"
-	],
-	"filament_multitool_ramming_volume": [
-		"10"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"nozzle_temperature": [
-		"280"
-	],
-	"nozzle_temperature_initial_layer": [
-		"280"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json
index 67bde29e8d..2e27630834 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json	
@@ -1,14 +1,70 @@
 {
 	"type": "filament",
 	"name": "Snapmaker ASA @U1",
+	"renamed_from": "Snapmaker ASA U1;Snapmaker ASA @U1 0.4 High Flow nozzle;Snapmaker ASA U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker ASA @U1 base",
 	"from": "system",
 	"setting_id": "XlbCMKY8EvV0vM88",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_retract_length_toolchange": [
 		"5"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0",
+		"15"
+	],
+	"fan_max_speed": [
+		"15",
+		"25"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"280"
+	],
+	"nozzle_temperature": [
+		"255",
+		"280"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"10"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"22"
+	],
+	"pressure_advance": [
+		"0.04",
+		"0.02"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"20"
+	],
+	"fan_min_speed": [
+		"0",
+		"10"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 9fa11d6101..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "Bzmt5I0LmEGEyWq3",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"0.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 0.5 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.2 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json
index 19dc66df4e..716c9926d1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json	
@@ -1,20 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker Breakaway Support For PLA U1 0.2 nozzle;Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "mJoaud6wulT4p8SA",
 	"filament_id": "OFnmp2pO",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"filament_type": [
 		"PLA"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"additional_cooling_fan_speed": [
 		"70"
 	],
@@ -101,5 +100,12 @@
 	],
 	"filament_unloading_speed_start": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 0.5 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.2 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 32fd557a65..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker Breakaway Support For PLA @U1",
-	"from": "system",
-	"setting_id": "2Wa2yfYIeZ0NfnD0",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker Support For PLA @U1 0.4 nozzle. Its base identifies the material as Snapmaker Breakaway Support. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 63e218c554..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "YRUG55NCp7gQtahJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.6 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json
index 6f800f7b98..0092f4e870 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json	
@@ -1,20 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker Breakaway Support For PLA U1 0.6 nozzle;Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "rKUUREJNhstIU0I2",
 	"filament_id": "OFnmp2pO",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_type": [
 		"PLA"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"filament_cost": [
 		"69.98"
 	],
@@ -101,5 +100,12 @@
 	],
 	"filament_unloading_speed_start": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.6 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index dce415fefe..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "vtGhXaMJKZrd1kgP",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.8 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json
index c7a2b01351..9d296edafb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json	
@@ -1,20 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker Breakaway Support For PLA U1 0.8 nozzle;Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "hQ8jQ5GKQKGKuPew",
 	"filament_id": "OFnmp2pO",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_type": [
 		"PLA"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"additional_cooling_fan_speed": [
 		"70"
 	],
@@ -95,5 +94,12 @@
 	],
 	"textured_plate_temp": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.8 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json
index eff74ae5ab..07c100e18d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker Breakaway Support For PLA @U1",
+	"renamed_from": "Snapmaker Breakaway Support For PLA U1;Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "5DqT3CYUgp1oJD1V",
 	"filament_id": "OFnmp2pO",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_type": [
 		"PLA"
@@ -89,5 +91,16 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker Support For PLA @U1 0.4 nozzle. Its base identifies the material as Snapmaker Breakaway Support. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"18"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index c097954185..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PA-CF @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PA-CF @U1",
-	"from": "system",
-	"setting_id": "SRbkfUJ8K9LunPYq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Snapmaker PA-CF @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json
index b2dc562d3b..f2297d56cf 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json	
@@ -1,11 +1,20 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PA-CF @U1",
+	"renamed_from": "Snapmaker PA-CF U1;Snapmaker PA-CF @U1 0.4 High Flow nozzle;Snapmaker PA-CF U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PA-CF @U1 base",
 	"from": "system",
 	"setting_id": "8aP6ye4aeOS7qKpG",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Snapmaker PA-CF @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index a7c30b3000..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PET @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PET @U1",
-	"from": "system",
-	"setting_id": "q0JpO9zk404c3d3B",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"6.8"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 6.8 mm^3/s, from local standard fallback preset Snapmaker PET @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json
index e4dd0d2035..10723ae4d1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json	
@@ -1,11 +1,20 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PET @U1",
+	"renamed_from": "Snapmaker PET U1;Snapmaker PET @U1 0.4 High Flow nozzle;Snapmaker PET U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PET @U1 base",
 	"from": "system",
 	"setting_id": "sIijFVd50jJB1sK0",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: JiaNong PET 1.63x1.75mm\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 6.8 mm^3/s, from local standard fallback preset Snapmaker PET @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index bf18d6fb9d..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PETG @U1",
-	"from": "system",
-	"setting_id": "T604QL6Utgbj4kLh",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10 mm^3/s, from local standard fallback preset Snapmaker PETG @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json
index 5df9952064..6a80696224 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json	
@@ -1,11 +1,20 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG @U1",
+	"renamed_from": "Snapmaker PETG U1;Snapmaker PETG @U1 0.4 High Flow nozzle;Snapmaker PETG U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PETG @U1 base",
 	"from": "system",
 	"setting_id": "r7KJB0EPpsknK5iH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10 mm^3/s, from local standard fallback preset Snapmaker PETG @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index c86ce97a3a..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,29 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PETG HF @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "ILQ3IFpogGbjluIN",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_flow_ratio": [
-		"0.955"
-	],
-	"pressure_advance": [
-		"0.0525"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json
index 9d9e3918cf..c015a5d3df 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json	
@@ -1,27 +1,22 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG HF @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PETG HF U1 0.2 nozzle;Snapmaker PETG HF @U1 0.2 High Flow nozzle;Snapmaker PETG HF U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PETG HF @U1 base2",
 	"from": "system",
 	"setting_id": "Ujul2YTBwfldFiFd",
 	"instantiation": "true",
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"filament_max_volumetric_speed": [
-		"1"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0"
+		"1",
+		"2"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"70"
@@ -75,7 +70,8 @@
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
-		"245"
+		"245",
+		"230"
 	],
 	"nozzle_temperature_range_low": [
 		"230"
@@ -103,5 +99,16 @@
 	],
 	"filament_z_hop_types": [
 		"Slope Lift"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.0525"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json
similarity index 54%
rename from resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json
rename to resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json
index 232d346113..6489aeaf67 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json	
@@ -1,68 +1,92 @@
 {
 	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.4 High Flow nozzle",
+	"name": "Snapmaker PETG HF @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PETG HF U1 0.4 nozzle;Snapmaker PETG HF @U1 0.4 High Flow nozzle;Snapmaker PETG HF U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PETG HF @U1 base2",
 	"from": "system",
-	"setting_id": "dYZPyzUTqIxCaWMZ",
+	"setting_id": "9NnYt52azW8zCp4a",
 	"instantiation": "true",
 	"compatible_printers": [
+		"Snapmaker U1 (0.4 nozzle)",
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
-	"fan_max_speed": [
-		"60"
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
-	"fan_min_speed": [
-		"30"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_flow_ratio": [
-		"0.955"
-	],
-	"filament_max_volumetric_speed": [
-		"30"
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_minimal_purge_on_wipe_tower": [
+		"15",
 		"50"
 	],
-	"filament_multitool_ramming": [
-		"1"
+	"nozzle_temperature_range_low": [
+		"220",
+		"230"
 	],
-	"filament_multitool_ramming_flow": [
-		"30"
+	"fan_max_speed": [
+		"40",
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"230"
+	],
+	"nozzle_temperature": [
+		"220",
+		"245"
 	],
 	"filament_multitool_ramming_volume": [
-		"8"
-	],
-	"filament_retract_length_toolchange": [
+		"0",
 		"8"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"0.8"
 	],
-	"filament_retraction_speed": [
-		"40"
-	],
 	"filament_wipe_distance": [
+		"nil",
 		"1"
 	],
-	"filament_z_hop_types": [
-		"Slope Lift"
+	"filament_max_volumetric_speed": [
+		"16",
+		"30"
 	],
-	"nozzle_temperature": [
-		"245"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
+	"filament_retract_length_toolchange": [
+		"nil",
+		"8"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.035"
 	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	"filament_deretraction_speed": [
+		"nil",
+		"40"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"30"
+	],
+	"fan_min_speed": [
+		"20",
+		"30"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Slope Lift"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"40"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 80eb645ad2..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,29 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PETG HF @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "A4AAbNDIaCgXqiIk",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_flow_ratio": [
-		"0.955"
-	],
-	"pressure_advance": [
-		"0.0525"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json
index 985505a027..1103fb9192 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json	
@@ -1,24 +1,18 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG HF @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PETG HF U1 0.6 nozzle;Snapmaker PETG HF @U1 0.6 High Flow nozzle;Snapmaker PETG HF U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PETG HF @U1 base2",
 	"from": "system",
 	"setting_id": "2FfQZdp5xunngnF0",
 	"instantiation": "true",
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"70"
@@ -84,7 +78,8 @@
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
-		"245"
+		"245",
+		"230"
 	],
 	"nozzle_temperature_range_low": [
 		"230"
@@ -109,5 +104,16 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.0525"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 10321dcf95..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,29 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG HF @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PETG HF @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "vDLX4xfsJUq4aWd8",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_flow_ratio": [
-		"0.955"
-	],
-	"pressure_advance": [
-		"0.0525"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json
index 83c1b17971..d1fea8441e 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json	
@@ -1,24 +1,18 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG HF @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PETG HF U1 0.8 nozzle;Snapmaker PETG HF @U1 0.8 High Flow nozzle;Snapmaker PETG HF U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PETG HF @U1 base2",
 	"from": "system",
 	"setting_id": "ebANa67V4B2nwUaX",
 	"instantiation": "true",
 	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"filament_ramming_travel_time": [
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0"
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"70"
@@ -81,7 +75,8 @@
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
-		"245"
+		"245",
+		"230"
 	],
 	"nozzle_temperature_range_low": [
 		"230"
@@ -106,5 +101,16 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"80"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.0525"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.955"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 6c67be5752..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG Translucent @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "jWQZ4FpmKof6eKP5",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.2875"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"1"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json
index ee6234f406..51725376e7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PETG Translucent U1 0.2 nozzle;Snapmaker PETG Translucent @U1 0.2 High Flow nozzle;Snapmaker PETG Translucent U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "UTpedqYJysaoe3OI",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"20"
@@ -80,9 +82,6 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"nozzle_temperature": [
-		"245"
-	],
 	"nozzle_temperature_initial_layer": [
 		"250"
 	],
@@ -93,7 +92,8 @@
 		"10%"
 	],
 	"pressure_advance": [
-		"0.23"
+		"0.23",
+		"0.2875"
 	],
 	"slow_down_min_speed": [
 		"10"
@@ -105,6 +105,14 @@
 		"80"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index c25ea01897..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG Translucent @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "SSb1PYKLfJmn0RaW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json
index e0e60a0e14..0bec924fdd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PETG Translucent U1 0.4 nozzle;Snapmaker PETG Translucent @U1 0.4 High Flow nozzle;Snapmaker PETG Translucent U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "k6UQJJASzFSfePqN",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"close_fan_the_first_x_layers": [
 		"3"
@@ -81,7 +83,8 @@
 		"10%"
 	],
 	"pressure_advance": [
-		"0.04"
+		"0.04",
+		"0.05"
 	],
 	"slow_down_min_speed": [
 		"10"
@@ -94,5 +97,15 @@
 	],
 	"filament_density": [
 		"1.25"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"additional_cooling_fan_speed": [
+		"0"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 675e07357b..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG Translucent @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "8teECJZmuiAx3xzK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json
index 14f59104f8..0f2a565897 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PETG Translucent U1 0.6 nozzle;Snapmaker PETG Translucent @U1 0.6 High Flow nozzle;Snapmaker PETG Translucent U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "FlcbnP3kWiJLMDMl",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"close_fan_the_first_x_layers": [
 		"3"
@@ -38,9 +40,6 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"nozzle_temperature": [
-		"245"
-	],
 	"nozzle_temperature_initial_layer": [
 		"250"
 	],
@@ -51,7 +50,8 @@
 		"10%"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.025"
 	],
 	"slow_down_min_speed": [
 		"10"
@@ -102,6 +102,14 @@
 		"Slope Lift"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index d8771ee472..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG Translucent @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "jFuSDlP3daCftYGd",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json
index e746141f06..d8cffc3787 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PETG Translucent U1 0.8 nozzle;Snapmaker PETG Translucent @U1 0.8 High Flow nozzle;Snapmaker PETG Translucent U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "aJk3TnFTU3uQGjd3",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"close_fan_the_first_x_layers": [
 		"3"
@@ -38,9 +40,6 @@
 	"hot_plate_temp": [
 		"80"
 	],
-	"nozzle_temperature": [
-		"245"
-	],
 	"nozzle_temperature_initial_layer": [
 		"250"
 	],
@@ -51,7 +50,8 @@
 		"10%"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.025"
 	],
 	"slow_down_min_speed": [
 		"10"
@@ -99,6 +99,14 @@
 		"Slope Lift"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index c5473497d8..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PETG-CF @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PETG-CF @U1",
-	"from": "system",
-	"setting_id": "kTtK6gmRn2LVCgPv",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"20"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"5"
-	],
-	"filament_flow_ratio": [
-		"1.01"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"30"
-	],
-	"filament_multitool_ramming": [
-		"1"
-	],
-	"filament_multitool_ramming_flow": [
-		"13"
-	],
-	"filament_multitool_ramming_volume": [
-		"0.5"
-	],
-	"filament_retract_length_toolchange": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"nozzle_temperature": [
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"pressure_advance": [
-		"0.028"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json
index f0bae32788..e58dd27968 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json	
@@ -1,11 +1,87 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PETG-CF @U1",
+	"renamed_from": "Snapmaker PETG-CF U1;Snapmaker PETG-CF @U1 0.4 High Flow nozzle;Snapmaker PETG-CF U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PETG-CF @U1 base",
 	"from": "system",
 	"setting_id": "i982wlNMSJujh6Vs",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0",
+		"30"
+	],
+	"nozzle_temperature_range_low": [
+		"220",
+		"240"
+	],
+	"fan_max_speed": [
+		"20",
+		"40"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"260"
+	],
+	"nozzle_temperature": [
+		"245",
+		"260"
+	],
+	"filament_multitool_ramming_volume": [
+		"0",
+		"0.5"
+	],
+	"additional_cooling_fan_speed": [
+		"0",
+		"20"
+	],
+	"nozzle_temperature_range_high": [
+		"255",
+		"270"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"0.6"
+	],
+	"filament_max_volumetric_speed": [
+		"6.4",
+		"18"
+	],
+	"filament_retract_length_toolchange": [
+		"nil"
+	],
+	"pressure_advance": [
+		"0.03",
+		"0.028"
+	],
+	"enable_pressure_advance": [
+		"0",
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"10",
+		"13"
+	],
+	"fan_min_speed": [
+		"0",
+		"5"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"1.01"
+	],
+	"filament_multitool_ramming": [
+		"0",
+		"1"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b0e13a4f79..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA @U1",
-	"from": "system",
-	"setting_id": "Iw2vC9RsmNnXlyFC",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"14"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 14 mm^3/s, from local standard fallback preset Snapmaker PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json
index 1a2f9e3ff3..f8097b3a27 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json	
@@ -1,17 +1,26 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA @U1",
+	"renamed_from": "Snapmaker PLA U1;Snapmaker PLA @U1 0.4 High Flow nozzle;Snapmaker PLA U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "upBaAiQ4fqmefjo6",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"hot_plate_temp": [
 		"55"
 	],
 	"hot_plate_temp_initial_layer": [
 		"55"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 14 mm^3/s, from local standard fallback preset Snapmaker PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 86cd96747b..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Basic @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Basic @U1",
-	"from": "system",
-	"setting_id": "6pP9yn7QPVxPrKlp",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json
index 4b68672fa5..cb6d5bd046 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Basic @U1",
+	"renamed_from": "Snapmaker PLA Basic U1;Snapmaker PLA Basic @U1 0.4 High Flow nozzle;Snapmaker PLA Basic U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "ZtUJN4JpkR0MLpiY",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -26,9 +28,6 @@
 	"adaptive_pressure_advance_overhangs": [
 		"0"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -68,12 +67,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.5"
 	],
@@ -129,7 +122,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -158,9 +151,6 @@
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
-	"filament_retraction_length": [
-		"nil"
-	],
 	"filament_retraction_minimum_travel": [
 		"nil"
 	],
@@ -224,18 +214,9 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -280,5 +261,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 100d225a88..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Eco @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Eco @U1",
-	"from": "system",
-	"setting_id": "yBXvtWTUvseiCC6p",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker PLA Eco @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json
index fadf7e59d2..52d6d8f92a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json	
@@ -1,11 +1,20 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Eco @U1",
+	"renamed_from": "Snapmaker PLA Eco U1;Snapmaker PLA Eco @U1 0.4 High Flow nozzle;Snapmaker PLA Eco U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Eco @U1 base",
 	"from": "system",
 	"setting_id": "mF73rtMhQQJz1bjt",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker PLA Eco @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f408b23651..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "Si1HKTz9ZSM8dIaU",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_retract_length_toolchange": [
-		"5"
-	],
-	"filament_retraction_length": [
-		"0.5"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json
index 219e8075e5..e58ce8df61 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PLA Full Spectrum U1 0.4 nozzle;Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle;Snapmaker PLA Full Spectrum U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "iybaFWrXKOsmXgMJ",
 	"filament_id": "OFOPU1xv",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -27,9 +29,6 @@
 	"adaptive_pressure_advance_overhangs": [
 		"0"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -58,7 +57,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -69,12 +69,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.5"
 	],
@@ -130,7 +124,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -139,7 +133,8 @@
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
-		"10"
+		"10",
+		"5"
 	],
 	"filament_retract_lift_above": [
 		"nil"
@@ -160,7 +155,8 @@
 		"nil"
 	],
 	"filament_retraction_length": [
-		"nil"
+		"nil",
+		"0.5"
 	],
 	"filament_retraction_minimum_travel": [
 		"nil"
@@ -211,7 +207,8 @@
 		"nil"
 	],
 	"filament_z_hop_types": [
-		"nil"
+		"nil",
+		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
 		"0"
@@ -225,18 +222,9 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -247,7 +235,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -281,5 +270,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 70c4b76b98..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Glow @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Glow @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "z33Hc87sYPmwPL5J",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"pressure_advance": [
-		"0.023"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json
index 907781cd2c..fa22f4812d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json	
@@ -1,15 +1,18 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PLA Glow U1 0.4 nozzle;Snapmaker PLA Glow @U1 0.4 High Flow nozzle;Snapmaker PLA Glow U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Glow @U1 base",
 	"from": "system",
 	"setting_id": "ee1YNNr8CwKetuvY",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
-		"80"
+		"80",
+		"100"
 	],
 	"complete_print_exhaust_fan_speed": [
 		"70"
@@ -30,7 +33,8 @@
 		"20"
 	],
 	"filament_flow_ratio": [
-		"0.97"
+		"0.97",
+		"0.98"
 	],
 	"filament_loading_speed": [
 		"28"
@@ -39,7 +43,8 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"16",
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"30"
@@ -91,5 +96,16 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"pressure_advance": [
+		"0.02",
+		"0.023"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f281f8795b..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Lite @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Lite @U1",
-	"from": "system",
-	"setting_id": "siahKp21MtWd5vha",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"15"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Snapmaker PLA Lite @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json
index d2c9dddefb..8e5c511b1b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Lite @U1",
+	"renamed_from": "Snapmaker PLA Lite U1;Snapmaker PLA Lite @U1 0.4 High Flow nozzle;Snapmaker PLA Lite U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Lite @U1 base",
 	"from": "system",
 	"setting_id": "ZZyxuKUboYttCqgM",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -26,9 +28,6 @@
 	"adaptive_pressure_advance_overhangs": [
 		"0"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -71,12 +70,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.5"
 	],
@@ -132,7 +125,7 @@
 		"10"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Snapmaker PLA Lite @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -158,9 +151,6 @@
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
-	"filament_retraction_length": [
-		"nil"
-	],
 	"filament_retraction_minimum_travel": [
 		"nil"
 	],
@@ -224,18 +214,9 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -280,5 +261,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"60"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index f9f65c0f64..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Matte @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "uJJlKJE6cP1VqAhi",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_flow_ratio": [
-		"1.0395"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json
index 2a8c1e40c3..ab7b23a405 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PLA Matte U1 0.2 nozzle;Snapmaker PLA Matte @U1 0.2 High Flow nozzle;Snapmaker PLA Matte U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "d3c48DeNk7VDeeHf",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"45"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"24.99"
 	],
@@ -96,7 +93,7 @@
 		"1"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -125,9 +122,6 @@
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
-	"filament_retraction_length": [
-		"nil"
-	],
 	"filament_retraction_minimum_travel": [
 		"nil"
 	],
@@ -173,9 +167,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -243,7 +234,8 @@
 		"nil"
 	],
 	"filament_flow_ratio": [
-		"1.05"
+		"1.05",
+		"1.0395"
 	],
 	"filament_loading_speed": [
 		"10"
@@ -276,12 +268,19 @@
 		"nil"
 	],
 	"nozzle_temperature": [
-		"215"
+		"215",
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"215"
+		"215",
+		"220"
 	],
 	"pressure_advance": [
-		"0.025"
+		"0.025",
+		"0.03"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 6a39076a6f..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,44 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Matte @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Matte @U1",
-	"from": "system",
-	"setting_id": "a0eQeSmYLKJpPxo9",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_flow_ratio": [
-		"0.99"
-	],
-	"filament_max_volumetric_speed": [
-		"40"
-	],
-	"filament_retraction_length": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 6c471d4f08..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Matte @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "DfrCVTFg0FD7XVkf",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_flow_ratio": [
-		"0.9801"
-	],
-	"pressure_advance": [
-		"0.018"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json
index 9de7615ae5..c4cf484227 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA Matte U1 0.6 nozzle;Snapmaker PLA Matte @U1 0.6 High Flow nozzle;Snapmaker PLA Matte U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "l3E1WaljDn2uoTqW",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"45"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"24.99"
 	],
@@ -105,7 +102,7 @@
 		"1"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -185,9 +182,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -243,7 +237,8 @@
 		"2"
 	],
 	"filament_flow_ratio": [
-		"0.99"
+		"0.99",
+		"0.9801"
 	],
 	"filament_loading_speed": [
 		"10"
@@ -276,12 +271,19 @@
 		"65"
 	],
 	"nozzle_temperature": [
-		"215"
+		"215",
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"215"
+		"215",
+		"220"
 	],
 	"pressure_advance": [
-		"0.015"
+		"0.015",
+		"0.018"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index d076c056a5..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,32 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Matte @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "jMrzguz4b18qMWem",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_flow_ratio": [
-		"0.9702"
-	],
-	"pressure_advance": [
-		"0.018"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json
index 251b2a47b6..41548165b6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA Matte U1 0.8 nozzle;Snapmaker PLA Matte @U1 0.8 High Flow nozzle;Snapmaker PLA Matte U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "NLPd4AA0seW3NXdy",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"45"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"24.99"
 	],
@@ -87,7 +84,8 @@
 		" "
 	],
 	"filament_flow_ratio": [
-		"0.98"
+		"0.98",
+		"0.9702"
 	],
 	"filament_is_support": [
 		"0"
@@ -105,7 +103,7 @@
 		"1"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -182,9 +180,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -222,7 +217,8 @@
 		"40"
 	],
 	"nozzle_temperature": [
-		"215"
+		"215",
+		"220"
 	],
 	"textured_plate_temp": [
 		"65"
@@ -279,9 +275,15 @@
 		"65"
 	],
 	"nozzle_temperature_initial_layer": [
-		"215"
+		"215",
+		"220"
 	],
 	"pressure_advance": [
-		"0.015"
+		"0.015",
+		"0.018"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json
index badf918d97..b97e9dbba4 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Matte @U1",
+	"renamed_from": "Snapmaker PLA Matte U1;Snapmaker PLA Matte @U1 0.4 High Flow nozzle;Snapmaker PLA Matte U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "uAhykL5ap1DAKacf",
 	"filament_id": "OFF9cgY5",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -28,7 +30,8 @@
 		"0"
 	],
 	"additional_cooling_fan_speed": [
-		"80"
+		"80",
+		"100"
 	],
 	"chamber_temperature": [
 		"0"
@@ -58,7 +61,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -69,12 +73,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.5"
 	],
@@ -90,9 +88,6 @@
 	"filament_density": [
 		"1.32"
 	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
 	"filament_diameter": [
 		"1.75"
 	],
@@ -100,7 +95,8 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
-		"1"
+		"1",
+		"0.99"
 	],
 	"filament_is_support": [
 		"0"
@@ -115,7 +111,8 @@
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
-		"22"
+		"22",
+		"40"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -130,14 +127,11 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
 	"filament_retract_length_toolchange": [
 		"5"
 	],
@@ -150,20 +144,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
+		"nil",
+		"1"
 	],
 	"filament_retraction_speed": [
 		"nil"
@@ -201,17 +187,13 @@
 	"filament_vendor": [
 		"Snapmaker"
 	],
-	"filament_wipe": [
-		"nil"
-	],
 	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
+		"nil",
+		"1"
 	],
 	"filament_z_hop_types": [
-		"nil"
+		"nil",
+		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
 		"0"
@@ -226,16 +208,12 @@
 		"0"
 	],
 	"nozzle_temperature": [
-		"215"
+		"215",
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
+		"215",
+		"220"
 	],
 	"overhang_fan_speed": [
 		"100"
@@ -247,7 +225,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -281,5 +260,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f26eeb2114..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Metal @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Metal @U1",
-	"from": "system",
-	"setting_id": "01UP0AVB1B7TBi78",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from local standard fallback preset Snapmaker PLA Metal @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json
index 538158a155..2c2d57761d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json	
@@ -1,11 +1,20 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Metal @U1",
+	"renamed_from": "Snapmaker PLA Metal U1;Snapmaker PLA Metal @U1 0.4 High Flow nozzle;Snapmaker PLA Metal U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Metal @U1 base",
 	"from": "system",
 	"setting_id": "lPmCxsx9EpoLoNEk",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from local standard fallback preset Snapmaker PLA Metal @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index a3715598dd..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Silk @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PLA Silk @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "3YXcTZZ99lTaxy3j",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json
index e4fdb8016b..18de9edada 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PLA Silk U1 0.2 nozzle;Snapmaker PLA Silk @U1 0.2 High Flow nozzle;Snapmaker PLA Silk U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "Q5xH6oGGlbXr14Pa",
 	"filament_id": "OFWgFOjn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -66,12 +68,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"25.4"
 	],
@@ -109,7 +105,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -189,9 +185,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -281,5 +274,9 @@
 	],
 	"pressure_advance": [
 		"0.015"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 23626faf6a..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Silk @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Silk @U1",
-	"from": "system",
-	"setting_id": "rpTq4sJFpmbdl0dy",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"80"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index b4f510bfec..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Silk @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA Silk @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "SYJSv3f1LWPnWTo1",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json
index b144ce86dd..3526a1c871 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA Silk U1 0.6 nozzle;Snapmaker PLA Silk @U1 0.6 High Flow nozzle;Snapmaker PLA Silk U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "2pieDQoz9PiDCnU1",
 	"filament_id": "OFWgFOjn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -66,12 +68,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"25.4"
 	],
@@ -109,7 +105,7 @@
 		"10"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -189,9 +185,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -281,5 +274,9 @@
 	],
 	"pressure_advance": [
 		"0.015"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 4919383540..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Silk @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA Silk @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "GpTeZsC8ST8UvkKe",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json
index aa92e97d18..7e11c05252 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA Silk U1 0.8 nozzle;Snapmaker PLA Silk @U1 0.8 High Flow nozzle;Snapmaker PLA Silk U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "f3H0JFUnds0mkKCN",
 	"filament_id": "OFWgFOjn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -66,12 +68,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"25.4"
 	],
@@ -109,7 +105,7 @@
 		"10"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -189,9 +185,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -281,5 +274,9 @@
 	],
 	"pressure_advance": [
 		"0.015"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json
index 6b6030b919..acd1c82116 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Silk @U1",
+	"renamed_from": "Snapmaker PLA Silk U1;Snapmaker PLA Silk @U1 0.4 High Flow nozzle;Snapmaker PLA Silk U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "9PkHSwtXFM0zPWth",
 	"filament_id": "OFWgFOjn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -28,7 +30,8 @@
 		"0"
 	],
 	"additional_cooling_fan_speed": [
-		"70"
+		"70",
+		"80"
 	],
 	"chamber_temperature": [
 		"0"
@@ -66,12 +69,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cost": [
 		"25.4"
 	],
@@ -109,7 +106,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -178,7 +175,8 @@
 		"nil"
 	],
 	"filament_z_hop_types": [
-		"nil"
+		"nil",
+		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
 		"0"
@@ -189,9 +187,6 @@
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -253,7 +248,8 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"10",
+		"12"
 	],
 	"filament_retraction_length": [
 		"0.2"
@@ -281,5 +277,9 @@
 	],
 	"pressure_advance": [
 		"0.015"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 4b3e1405bb..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "75HoJsG7nurT9m8o",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"pressure_advance": [
-		"0.24"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json
index 7fcb20f31b..842d5fee73 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PLA SnapSpeed U1 0.2 nozzle;Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "jsAgNNiUC6DoO7rz",
@@ -33,7 +34,8 @@
 		"65"
 	],
 	"pressure_advance": [
-		"0.2"
+		"0.2",
+		"0.24"
 	],
 	"textured_plate_temp": [
 		"65"
@@ -42,9 +44,18 @@
 		"65"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 48a4044180..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1",
-	"from": "system",
-	"setting_id": "2S7b7VwKFkZuXTHB",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"40"
-	],
-	"filament_multitool_ramming_flow": [
-		"40"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 92c7b1388d..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "e3hivxxVP4MEauB0",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json
index 18fca8b4fd..81b67fee51 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA SnapSpeed U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "aKudBpQBj3MZZZav",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_deretraction_speed": [
 		"30"
@@ -36,6 +38,18 @@
 		"65"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"pressure_advance": [
+		"0.02",
+		"0.024"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 20db16271a..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "0ZOycCmSyLf9Zr3f",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"pressure_advance": [
-		"0.0216"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json
index 2ebadbd2b2..1654724651 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA SnapSpeed U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "sWoInox4hzxzIHfe",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_deretraction_speed": [
 		"30"
@@ -27,7 +29,8 @@
 		"215"
 	],
 	"pressure_advance": [
-		"0.018"
+		"0.018",
+		"0.0216"
 	],
 	"textured_plate_temp": [
 		"65"
@@ -36,6 +39,14 @@
 		"65"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json
index 2525f5b2a9..98e2cb5877 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA SnapSpeed @U1",
+	"renamed_from": "Snapmaker PLA SnapSpeed U1;Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA SnapSpeed @U1 base",
 	"from": "system",
 	"setting_id": "en6Pvvbc1P9TKm8I",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -26,9 +28,6 @@
 	"adaptive_pressure_advance_overhangs": [
 		"0"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -57,7 +56,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -68,12 +68,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.5"
 	],
@@ -114,7 +108,8 @@
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
-		"20"
+		"20",
+		"40"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -123,13 +118,14 @@
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
-		"30"
+		"30",
+		"40"
 	],
 	"filament_multitool_ramming_volume": [
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -224,18 +220,9 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
 	"nozzle_temperature_range_high": [
 		"240"
 	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -246,7 +233,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -280,5 +268,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json
deleted file mode 100644
index 30c289604f..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Translucent @U1 0.2 High Flow nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 0.2 nozzle",
-	"from": "system",
-	"setting_id": "atEZp48A9Ajefn5P",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.18"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"1.6"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json
index 6271b7af42..2e2732dbd5 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+	"renamed_from": "Snapmaker PLA Translucent U1 0.2 nozzle;Snapmaker PLA Translucent @U1 0.2 High Flow nozzle;Snapmaker PLA Translucent U1 0.2 High Flow nozzle",
 	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "zIg9XLrieYNBduyn",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.4"
 	],
@@ -89,9 +86,6 @@
 	"filament_density": [
 		"1.22"
 	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
 	"filament_diameter": [
 		"1.75"
 	],
@@ -129,7 +123,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -149,21 +143,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
 		"0.2"
 	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
 	"filament_retraction_speed": [
 		"nil"
 	],
@@ -206,9 +191,6 @@
 	"filament_wipe_distance": [
 		"1"
 	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
@@ -224,15 +206,6 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
 	"nozzle_temperature_range_low": [
 		"200"
 	],
@@ -246,7 +219,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.15"
+		"0.15",
+		"0.18"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -280,5 +254,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index d8ab413ff1..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,20 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Translucent @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "OhPRQfEeCCBos1Xk",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json
index 7d4270ef31..87cbfc8ed8 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PLA Translucent U1 0.4 nozzle;Snapmaker PLA Translucent @U1 0.4 High Flow nozzle;Snapmaker PLA Translucent U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "RqtrcLcy124ICGEc",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -56,9 +58,6 @@
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
-	"enable_pressure_advance": [
-		"1"
-	],
 	"eng_plate_temp": [
 		"60"
 	],
@@ -68,12 +67,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.4"
 	],
@@ -89,9 +82,6 @@
 	"filament_density": [
 		"1.32"
 	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
 	"filament_diameter": [
 		"1.75"
 	],
@@ -129,14 +119,11 @@
 		"10"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
 	"filament_retract_length_toolchange": [
 		"5"
 	],
@@ -149,21 +136,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
 		"0.2"
 	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
 	"filament_retraction_speed": [
 		"nil"
 	],
@@ -200,15 +178,6 @@
 	"filament_vendor": [
 		"Snapmaker"
 	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
@@ -224,18 +193,6 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -246,7 +203,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -280,5 +238,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 08ef19a9cb..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Translucent @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "UkjutA0LDsne1Kr4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json
index af3f95c757..b9320cf13b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA Translucent U1 0.6 nozzle;Snapmaker PLA Translucent @U1 0.6 High Flow nozzle;Snapmaker PLA Translucent U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "OZHemzEcvzFMN8fL",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.4"
 	],
@@ -89,18 +86,12 @@
 	"filament_density": [
 		"1.22"
 	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
 	"filament_diameter": [
 		"1.75"
 	],
 	"filament_end_gcode": [
 		"; filament end gcode \n"
 	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
 	"filament_is_support": [
 		"0"
 	],
@@ -129,7 +120,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -149,21 +140,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
 		"0.5"
 	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
 	"filament_retraction_speed": [
 		"50"
 	],
@@ -200,15 +182,6 @@
 	"filament_vendor": [
 		"Snapmaker"
 	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
@@ -224,15 +197,6 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
 	"nozzle_temperature_range_low": [
 		"200"
 	],
@@ -246,7 +210,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -280,5 +245,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index a2e1b4dc16..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Translucent @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "IEcagoFA1np00DZq",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json
index a10a4b2fb1..c9f55207ca 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA Translucent U1 0.8 nozzle;Snapmaker PLA Translucent @U1 0.8 High Flow nozzle;Snapmaker PLA Translucent U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "IPehCg9fKawLorB5",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -57,7 +59,8 @@
 		"1"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"eng_plate_temp": [
 		"60"
@@ -68,12 +71,6 @@
 	"fan_cooling_layer_time": [
 		"100"
 	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
 	"filament_cooling_final_speed": [
 		"3.4"
 	],
@@ -89,9 +86,6 @@
 	"filament_density": [
 		"1.22"
 	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
 	"filament_diameter": [
 		"1.75"
 	],
@@ -129,7 +123,7 @@
 		"5"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -149,21 +143,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
 		"1"
 	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
 	"filament_retraction_speed": [
 		"nil"
 	],
@@ -200,15 +185,6 @@
 	"filament_vendor": [
 		"Snapmaker"
 	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
@@ -224,15 +200,6 @@
 	"idle_temperature": [
 		"0"
 	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"240"
-	],
 	"nozzle_temperature_range_low": [
 		"200"
 	],
@@ -246,7 +213,8 @@
 		"0.4157"
 	],
 	"pressure_advance": [
-		"0.02"
+		"0.02",
+		"0.024"
 	],
 	"reduce_fan_stop_start_freq": [
 		"1"
@@ -280,5 +248,9 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 47fa100cd1..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Wood @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA Wood @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "7IGP2hVMK7ajiLuk",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_retract_length_toolchange": [
-		"6"
-	],
-	"filament_z_hop_types": [
-		"Auto Lift"
-	],
-	"pressure_advance": [
-		"0.024"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json
index 283d5876b7..6ba340e303 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json	
@@ -1,20 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
+	"renamed_from": "Snapmaker PLA Wood U1 0.4 nozzle;Snapmaker PLA Wood @U1 0.4 High Flow nozzle;Snapmaker PLA Wood U1 0.4 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "XvizDDHbds3bVrzi",
 	"filament_id": "OFdd8ZqJ",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		""
 	],
-	"enable_pressure_advance": [
-		"1"
-	],
 	"filament_end_gcode": [
 		"\n"
 	],
@@ -43,7 +42,8 @@
 		"0.97"
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"18",
+		"20"
 	],
 	"filament_multitool_ramming_flow": [
 		"40"
@@ -52,13 +52,15 @@
 		"10"
 	],
 	"filament_retract_length_toolchange": [
-		"5"
+		"5",
+		"6"
 	],
 	"filament_retraction_length": [
 		"0.6"
 	],
 	"pressure_advance": [
-		"0.025"
+		"0.025",
+		"0.024"
 	],
 	"slow_down_layer_time": [
 		"4"
@@ -104,5 +106,16 @@
 	],
 	"temperature_vitrification": [
 		"45"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"Auto Lift"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 9fc8c36369..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Wood @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA Wood @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "8tH46AUyW4uua5QB",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"pressure_advance": [
-		"0.0134"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json
index 09555457d5..8401fb7635 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json	
@@ -1,19 +1,22 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA Wood U1 0.6 nozzle;Snapmaker PLA Wood @U1 0.6 High Flow nozzle;Snapmaker PLA Wood U1 0.6 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "Kp77DCcitdmoyjqm",
 	"filament_id": "OFdd8ZqJ",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		""
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"filament_end_gcode": [
 		"\n"
@@ -39,9 +42,6 @@
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
@@ -58,7 +58,8 @@
 		"0.4"
 	],
 	"pressure_advance": [
-		"0.014"
+		"0.014",
+		"0.0134"
 	],
 	"slow_down_layer_time": [
 		"4"
@@ -110,5 +111,12 @@
 	],
 	"temperature_vitrification": [
 		"45"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 5300cdbb96..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA Wood @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA Wood @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "LW5RkXBTM4eE3eRK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"pressure_advance": [
-		"0.0067"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json
index 4a5a04a5ee..b645dd168a 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json	
@@ -1,19 +1,22 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA Wood U1 0.8 nozzle;Snapmaker PLA Wood @U1 0.8 High Flow nozzle;Snapmaker PLA Wood U1 0.8 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "nBYnNiqwLo6nAsqi",
 	"filament_id": "OFdd8ZqJ",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		""
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"filament_end_gcode": [
 		"\n"
@@ -58,7 +61,8 @@
 		"0.4"
 	],
 	"pressure_advance": [
-		"0.007"
+		"0.007",
+		"0.0067"
 	],
 	"slow_down_layer_time": [
 		"4"
@@ -110,5 +114,12 @@
 	],
 	"temperature_vitrification": [
 		"45"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index b156c65012..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,38 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA-CF @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PLA-CF @U1 0.4 nozzle",
-	"from": "system",
-	"setting_id": "ork4mVEyJBzXs2Xj",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"additional_cooling_fan_speed": [
-		"100"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_multitool_ramming_flow": [
-		"30"
-	],
-	"filament_retract_length_toolchange": [
-		"15"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"pressure_advance": [
-		"0.02"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json
index 357c5de50a..98db5dbfbb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json	
@@ -1,17 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
-	"renamed_from": "Snapmaker PLA-CF @U1",
+	"renamed_from": "Snapmaker PLA-CF @U1;Snapmaker PLA-CF @U1 0.4 High Flow nozzle;Snapmaker PLA-CF U1 0.4 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "2INwruC3ZVkBTdUT",
 	"filament_id": "OFhQf8ou",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
-	],
-	"enable_pressure_advance": [
-		"1"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_end_gcode": [
 		""
@@ -20,7 +18,8 @@
 		"1"
 	],
 	"filament_multitool_ramming_flow": [
-		"20"
+		"20",
+		"30"
 	],
 	"filament_start_gcode": [
 		""
@@ -40,11 +39,9 @@
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
 	"filament_max_volumetric_speed": [
-		"15"
+		"15",
+		"20"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"50"
@@ -53,10 +50,12 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
-		"5"
+		"5",
+		"15"
 	],
 	"filament_retraction_length": [
-		"1"
+		"1",
+		"0.8"
 	],
 	"filament_type": [
 		"PLA-CF"
@@ -68,10 +67,12 @@
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
-		"240"
+		"240",
+		"230"
 	],
 	"nozzle_temperature_initial_layer": [
-		"240"
+		"240",
+		"230"
 	],
 	"nozzle_temperature_range_high": [
 		"250"
@@ -80,7 +81,8 @@
 		"200"
 	],
 	"pressure_advance": [
-		"0.01"
+		"0.01",
+		"0.02"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -128,6 +130,14 @@
 		"45"
 	],
 	"additional_cooling_fan_speed": [
-		"0"
+		"0",
+		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 28e15cb5eb..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,29 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA-CF @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PLA-CF @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "c982QxKnlzVRADnm",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json
index 6f09ea5d6a..41f7688d01 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json	
@@ -1,16 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PLA-CF U1 0.6 nozzle;Snapmaker PLA-CF @U1 0.6 High Flow nozzle;Snapmaker PLA-CF U1 0.6 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "CKfdL85SvbOLzMuP",
 	"filament_id": "OFhQf8ou",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"filament_end_gcode": [
 		""
@@ -39,9 +42,6 @@
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
@@ -60,17 +60,16 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
-		"220"
+		"220",
+		"210"
 	],
 	"nozzle_temperature_initial_layer": [
-		"220"
+		"220",
+		"210"
 	],
 	"nozzle_temperature_range_high": [
 		"250"
@@ -79,7 +78,8 @@
 		"210"
 	],
 	"pressure_advance": [
-		"0.015"
+		"0.015",
+		"0.03"
 	],
 	"filament_cost": [
 		"35"
@@ -134,5 +134,12 @@
 	],
 	"additional_cooling_fan_speed": [
 		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 7c62ffd8ed..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,29 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PLA-CF @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PLA-CF @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "4qXeMrTt9pZNCwEr",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"pressure_advance": [
-		"0.03"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json
index 564e59e1a9..a589a22a83 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json	
@@ -1,16 +1,19 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PLA-CF U1 0.8 nozzle;Snapmaker PLA-CF @U1 0.8 High Flow nozzle;Snapmaker PLA-CF U1 0.8 High Flow nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "fhhnfJm4dN9FXpWQ",
 	"filament_id": "OFhQf8ou",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
-		"0"
+		"0",
+		"1"
 	],
 	"filament_end_gcode": [
 		""
@@ -39,9 +42,6 @@
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
 	"filament_max_volumetric_speed": [
 		"18"
 	],
@@ -60,17 +60,16 @@
 	"filament_type": [
 		"PLA-CF"
 	],
-	"filament_z_hop": [
-		"nil"
-	],
 	"filament_z_hop_types": [
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
-		"220"
+		"220",
+		"210"
 	],
 	"nozzle_temperature_initial_layer": [
-		"220"
+		"220",
+		"210"
 	],
 	"nozzle_temperature_range_high": [
 		"250"
@@ -79,7 +78,8 @@
 		"210"
 	],
 	"pressure_advance": [
-		"0.015"
+		"0.015",
+		"0.03"
 	],
 	"filament_cost": [
 		"35"
@@ -131,5 +131,12 @@
 	],
 	"additional_cooling_fan_speed": [
 		"0"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index ab3a76e43d..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,26 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PVA @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker PVA @U1",
-	"from": "system",
-	"setting_id": "NZwDYFscSMlZJusK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_max_volumetric_speed": [
-		"6"
-	],
-	"filament_multitool_ramming_flow": [
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_notes": [
-		"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index b3f8c6db87..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,20 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PVA @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker PVA @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "AO1DsQ9uGg1ivN8b",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_flow_ratio": [
-		"0.9506"
-	],
-	"filament_notes": [
-		"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"6"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json
index b28e0627ad..c8899e0fcc 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json	
@@ -1,15 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PVA @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker PVA U1 0.6 nozzle;Snapmaker PVA @U1 0.6 High Flow nozzle;Snapmaker PVA U1 0.6 High Flow nozzle",
 	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "lIqgnfeZdAm8G0TH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
-	],
-	"enable_pressure_advance": [
-		"0"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"70"
@@ -30,7 +29,8 @@
 		"nil"
 	],
 	"filament_flow_ratio": [
-		"0.98"
+		"0.98",
+		"0.9506"
 	],
 	"filament_retract_length_toolchange": [
 		"10"
@@ -109,5 +109,12 @@
 	],
 	"fan_min_speed": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index b18972c81f..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,20 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker PVA @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker PVA @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "xy6MMfFlgvgrP0Xj",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_flow_ratio": [
-		"0.9312"
-	],
-	"filament_notes": [
-		"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	],
-	"filament_max_volumetric_speed": [
-		"6"
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json
index 6572a60078..0be4a98af7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json	
@@ -1,15 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PVA @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker PVA U1 0.8 nozzle;Snapmaker PVA @U1 0.8 High Flow nozzle;Snapmaker PVA U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "WxtuvwWxy73Gi0IK",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
-	],
-	"enable_pressure_advance": [
-		"0"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"additional_cooling_fan_speed": [
 		"70"
@@ -33,7 +32,8 @@
 		"nil"
 	],
 	"filament_flow_ratio": [
-		"0.96"
+		"0.96",
+		"0.9312"
 	],
 	"filament_retract_length_toolchange": [
 		"10"
@@ -103,5 +103,12 @@
 	],
 	"filament_unloading_speed_start": [
 		"100"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json
index 5ed5d243ac..a84579c6aa 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker PVA @U1",
+	"renamed_from": "Snapmaker PVA U1;Snapmaker PVA @U1 0.4 High Flow nozzle;Snapmaker PVA U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "A9gyeySGTtUrTPeG",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
 		"1"
@@ -51,7 +53,8 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
-		"5"
+		"5",
+		"6"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"20"
@@ -66,7 +69,8 @@
 		"4"
 	],
 	"filament_retraction_length": [
-		"0.4"
+		"0.4",
+		"0.6"
 	],
 	"filament_retraction_speed": [
 		"nil"
@@ -97,5 +101,19 @@
 	],
 	"textured_plate_temp_initial_layer": [
 		"65"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"0.97"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 441562c8d7..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPE @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPE @U1",
-	"from": "system",
-	"setting_id": "wLR0Jg5KEPd18zik",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.2"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.2 mm^3/s, from local standard fallback preset Snapmaker TPE @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json
index a4214b6cd0..7860c778f9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPE @U1",
+	"renamed_from": "Snapmaker TPE U1;Snapmaker TPE @U1 0.4 High Flow nozzle;Snapmaker TPE U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker TPU @U1 base",
 	"from": "system",
 	"setting_id": "aqE9IR6dFd2MQLXR",
 	"filament_id": "OFWTAEjH",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"hot_plate_temp": [
 		"45"
@@ -37,6 +39,10 @@
 		""
 	],
 	"filament_notes": [
-		"eSUN eLastic TPE-83A\n"
+		"Standard nozzle: eSUN eLastic TPE-83A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.2 mm^3/s, from local standard fallback preset Snapmaker TPE @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 61b7ca0026..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 90A @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPU 90A @U1",
-	"from": "system",
-	"setting_id": "xAMUl2DDEuMrrzAs",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 0e85a008d6..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 90A @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker TPU 90A @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "URpA1Br6ZxbbV0IF",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json
index afb529e983..4f6e935751 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 90A @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker TPU 90A U1 0.6 nozzle;Snapmaker TPU 90A @U1 0.6 High Flow nozzle;Snapmaker TPU 90A U1 0.6 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "uQCplebxmpBpzsnk",
@@ -10,7 +11,8 @@
 		"3.2"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -36,9 +38,6 @@
 	"during_print_exhaust_fan_speed": [
 		"70"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"filament_deretraction_speed": [
 		"20"
 	],
@@ -146,5 +145,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index bd3a88d1cd..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 90A @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker TPU 90A @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "nECpLUQc8O9JE4em",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json
index 8cf3452469..005cf1bf08 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 90A @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker TPU 90A U1 0.8 nozzle;Snapmaker TPU 90A @U1 0.8 High Flow nozzle;Snapmaker TPU 90A U1 0.8 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "w4Hpl2qNPmgNvaeM",
@@ -10,7 +11,8 @@
 		"3.5"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -27,18 +29,12 @@
 	"pressure_advance": [
 		"0.02"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"complete_print_exhaust_fan_speed": [
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
 		"70"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"filament_deretraction_speed": [
 		"20"
 	],
@@ -140,5 +136,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json
index 8f6ba9663f..6579347154 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 90A @U1",
+	"renamed_from": "Snapmaker TPU 90A U1;Snapmaker TPU 90A @U1 0.4 High Flow nozzle;Snapmaker TPU 90A U1 0.4 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "T4MmgICRrSzvmCZ5",
@@ -10,7 +11,8 @@
 		"3.2"
 	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -36,9 +38,6 @@
 	"during_print_exhaust_fan_speed": [
 		"100"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"filament_deretraction_speed": [
 		"15"
 	],
@@ -63,9 +62,6 @@
 	"nozzle_temperature": [
 		"230"
 	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
 	"slow_down_layer_time": [
 		"14"
 	],
@@ -137,5 +133,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 391cec907f..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 95A @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPU 95A @U1",
-	"from": "system",
-	"setting_id": "Ywz3Y08u16nlPSuD",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from local standard fallback preset Snapmaker TPU 95A @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json
index 59b125ff72..af1137ccca 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json	
@@ -1,12 +1,14 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 95A @U1",
+	"renamed_from": "Snapmaker TPU 95A U1;Snapmaker TPU 95A @U1 0.4 High Flow nozzle;Snapmaker TPU 95A U1 0.4 High Flow nozzle",
 	"inherits": "Snapmaker TPU 95A @U1 base",
 	"from": "system",
 	"setting_id": "XdvEzjOGtQKamDRC",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
 		"0"
@@ -26,9 +28,6 @@
 	"adaptive_pressure_advance_overhangs": [
 		"0"
 	],
-	"additional_cooling_fan_speed": [
-		"70"
-	],
 	"chamber_temperature": [
 		"0"
 	],
@@ -98,9 +97,6 @@
 	"filament_end_gcode": [
 		"; filament end gcode \n"
 	],
-	"filament_flow_ratio": [
-		"1"
-	],
 	"filament_is_support": [
 		"0"
 	],
@@ -116,9 +112,6 @@
 	"filament_max_volumetric_speed": [
 		"3.2"
 	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
 	"filament_multitool_ramming": [
 		"0"
 	],
@@ -129,14 +122,11 @@
 		"10"
 	],
 	"filament_notes": [
-		""
+		"High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from local standard fallback preset Snapmaker TPU 95A @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_ramming_parameters": [
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
 	"filament_retract_lift_above": [
 		"nil"
 	],
@@ -146,21 +136,12 @@
 	"filament_retract_lift_enforce": [
 		"nil"
 	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
 	"filament_retraction_distances_when_cut": [
 		"nil"
 	],
 	"filament_retraction_length": [
 		"1.4"
 	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
 	"filament_retraction_speed": [
 		"30"
 	],
@@ -197,12 +178,6 @@
 	"filament_vendor": [
 		"Snapmaker"
 	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
 	"filament_z_hop": [
 		"0.4"
 	],
@@ -227,12 +202,6 @@
 	"nozzle_temperature_initial_layer": [
 		"225"
 	],
-	"nozzle_temperature_range_high": [
-		"250"
-	],
-	"nozzle_temperature_range_low": [
-		"200"
-	],
 	"overhang_fan_speed": [
 		"100"
 	],
@@ -280,5 +249,9 @@
 	],
 	"default_filament_colour": [
 		""
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index f0b49ea018..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPU 95A HF @U1",
-	"from": "system",
-	"setting_id": "hVOeZYtFdD5f9n8N",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"9"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 198b8de558..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
-	"from": "system",
-	"setting_id": "gkRhqrvJIZh1o3wJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json
index b9619dcca5..b3d48fd8dd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 95A HF @U1 0.6 nozzle",
+	"renamed_from": "Snapmaker TPU 95A HF U1 0.6 nozzle;Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle;Snapmaker TPU 95A HF U1 0.6 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "Q2svXpkEqg0dCdq3",
 	"filament_id": "OFXSvqOX",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -21,9 +23,6 @@
 	"filament_multitool_ramming_volume": [
 		"0.1"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"fan_cooling_layer_time": [
 		"100"
 	],
@@ -143,5 +142,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 28374dc75a..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
-	"from": "system",
-	"setting_id": "ILlLnES7BQLAKxnH",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json
index 4283ac2651..f72a73a7dc 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 95A HF @U1 0.8 nozzle",
+	"renamed_from": "Snapmaker TPU 95A HF U1 0.8 nozzle;Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle;Snapmaker TPU 95A HF U1 0.8 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "RjsE08h3l37cAkAs",
 	"filament_id": "OFXSvqOX",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -21,9 +23,6 @@
 	"filament_multitool_ramming_volume": [
 		"0.1"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"fan_cooling_layer_time": [
 		"100"
 	],
@@ -143,5 +142,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json
index 816b78ceb8..f91214894c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json	
@@ -1,13 +1,15 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU 95A HF @U1",
+	"renamed_from": "Snapmaker TPU 95A HF U1;Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle;Snapmaker TPU 95A HF U1 0.4 High Flow nozzle",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "KwcwmV2UmZUgCBoz",
 	"filament_id": "OFXSvqOX",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_start_gcode": [
 		"; filament start gcode\n"
@@ -21,9 +23,6 @@
 	"filament_multitool_ramming_volume": [
 		"0.1"
 	],
-	"enable_pressure_advance": [
-		"0"
-	],
 	"fan_cooling_layer_time": [
 		"40"
 	],
@@ -60,9 +59,6 @@
 	"nozzle_temperature": [
 		"230"
 	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
 	"overhang_fan_threshold": [
 		"25%"
 	],
@@ -140,5 +136,12 @@
 	],
 	"nozzle_temperature_range_low": [
 		"200"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index c976fd3bc9..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPU @U1",
-	"from": "system",
-	"setting_id": "fzFdqg3bAFNCOB7S",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 98b3b6a564..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker TPU @U1",
-	"from": "system",
-	"setting_id": "qABR1pUxRSY6jSAk",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index 8f49d839c3..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker TPU @U1",
-	"from": "system",
-	"setting_id": "fgWdX41gAzkDoAW5",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"10.5"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json
index ba393bed17..7a62ae80ec 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU @U1",
+	"renamed_from": "Snapmaker TPU U1;Snapmaker TPU @U1 0.4 High Flow nozzle;Snapmaker TPU U1 0.4 High Flow nozzle;Snapmaker TPU @U1 0.6 High Flow nozzle;Snapmaker TPU U1 0.6 High Flow nozzle;Snapmaker TPU @U1 0.8 High Flow nozzle;Snapmaker TPU U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker TPU @U1 base",
 	"from": "system",
 	"setting_id": "QLO4hkw6Agd3gSyR",
@@ -8,6 +9,20 @@
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)",
 		"Snapmaker U1 (0.6 nozzle)",
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"filament_notes": [
+		"Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_max_volumetric_speed": [
+		"2.8",
+		"10.5"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json
deleted file mode 100644
index 3118864459..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle",
-	"inherits": "Snapmaker TPU High-Flow @U1",
-	"from": "system",
-	"setting_id": "UFqQnkKICuivJWiW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.6"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json
deleted file mode 100644
index 0c0a988c82..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle",
-	"inherits": "Snapmaker TPU High-Flow @U1",
-	"from": "system",
-	"setting_id": "E5Y9PFB8elCm2yGh",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.6"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json
deleted file mode 100644
index ed24acdd57..0000000000
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle.json	
+++ /dev/null
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle",
-	"inherits": "Snapmaker TPU High-Flow @U1",
-	"from": "system",
-	"setting_id": "FXqeu1WlfeqwdbrM",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"filament_max_volumetric_speed": [
-		"7.6"
-	],
-	"filament_notes": [
-		"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
-	]
-}
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json
index 0aca011924..949a230b9f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json	
@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Snapmaker TPU High-Flow @U1",
+	"renamed_from": "Snapmaker TPU High-Flow U1;Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle;Snapmaker TPU High-Flow U1 0.4 High Flow nozzle;Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle;Snapmaker TPU High-Flow U1 0.6 High Flow nozzle;Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle;Snapmaker TPU High-Flow U1 0.8 High Flow nozzle",
 	"inherits": "Snapmaker TPU @U1 base",
 	"from": "system",
 	"setting_id": "5AXIg8WCdcd74S5v",
@@ -9,7 +10,10 @@
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)",
 		"Snapmaker U1 (0.6 nozzle)",
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_flow_ratio": [
 		"0.983"
@@ -27,6 +31,10 @@
 		"nil"
 	],
 	"filament_notes": [
-		"!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n"
+		"Standard nozzle: !! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
 	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json
index 692b06c904..042df8f861 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json	
@@ -9,11 +9,41 @@
 	"printer_variant": "0.2 High Flow",
 	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
-		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle"
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.2 nozzle"
 	],
-	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
+	"default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n",
+	"extruder_type": [
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive"
+	],
+	"extruder_variant_list": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"printer_extruder_id": [
+		"1",
+		"2",
+		"3",
+		"4"
+	],
+	"printer_extruder_variant": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"default_nozzle_volume_type": [
+		"High Flow",
+		"High Flow",
+		"High Flow",
+		"High Flow"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json
index 92bb62362b..1a8c1a0448 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json	
@@ -9,11 +9,41 @@
 	"printer_variant": "0.4 High Flow",
 	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
-		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle"
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1",
+		"Snapmaker PLA SnapSpeed @U1"
 	],
-	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
+	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n",
+	"extruder_type": [
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive"
+	],
+	"extruder_variant_list": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"printer_extruder_id": [
+		"1",
+		"2",
+		"3",
+		"4"
+	],
+	"printer_extruder_variant": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"default_nozzle_volume_type": [
+		"High Flow",
+		"High Flow",
+		"High Flow",
+		"High Flow"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json
index 81844e4a64..07d651e5c4 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json	
@@ -9,11 +9,41 @@
 	"printer_variant": "0.6 High Flow",
 	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
-		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle"
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.6 nozzle"
 	],
-	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
+	"default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n",
+	"extruder_type": [
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive"
+	],
+	"extruder_variant_list": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"printer_extruder_id": [
+		"1",
+		"2",
+		"3",
+		"4"
+	],
+	"printer_extruder_variant": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"default_nozzle_volume_type": [
+		"High Flow",
+		"High Flow",
+		"High Flow",
+		"High Flow"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json
index 2b357df990..6730524bc1 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json	
@@ -9,11 +9,41 @@
 	"printer_variant": "0.8 High Flow",
 	"printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.",
 	"default_filament_profile": [
-		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
-		"Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle"
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+		"Snapmaker PLA SnapSpeed @U1 0.8 nozzle"
 	],
-	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n"
+	"default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+	"machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n    move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n",
+	"extruder_type": [
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive",
+		"Direct Drive"
+	],
+	"extruder_variant_list": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"printer_extruder_id": [
+		"1",
+		"2",
+		"3",
+		"4"
+	],
+	"printer_extruder_variant": [
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow",
+		"Direct Drive High Flow"
+	],
+	"default_nozzle_volume_type": [
+		"High Flow",
+		"High Flow",
+		"High Flow",
+		"High Flow"
+	]
 }
diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json
index 532e3a22bf..3fa02cde23 100644
--- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json	
@@ -5,7 +5,7 @@
 	"family": "Snapmaker",
 	"url": "",
 	"model_id": "797581801",
-	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1;Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle;Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle",
+	"default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1",
 	"bed_model": "Snapmaker U1_bed.stl",
 	"bed_texture": "Snapmaker U1_texture.svg",
 	"nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow"
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index 3deab05cdd..0000000000
--- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "LFjXyYMCx6Oy12PQ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json
index 15546ce4bb..47dc63e06d 100644
--- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -1,18 +1,33 @@
 {
 	"type": "process",
 	"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.06 High Quality Snapmaker U1 (0.2 nozzle);0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.06 High Quality Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.06_nozzle_0.2",
 	"from": "system",
 	"setting_id": "3SCofR6VrVyo3vJp",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
-	"default_acceleration": "4000",
+	"default_acceleration": [
+		"4000"
+	],
 	"elefant_foot_compensation": "0.15",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -20,10 +35,62 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "13.5",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index f48dfa5c3b..0000000000
--- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "nMJ1UXr4uyWr62Nx",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json
index 3881460bda..710f8d2547 100644
--- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.06 Standard Snapmaker U1 (0.2 nozzle);0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.06 Standard Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.06_nozzle_0.2",
 	"from": "system",
 	"setting_id": "997RaiNHd2YhpaRB",
@@ -8,7 +9,8 @@
 	"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -16,10 +18,72 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "13.5",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index 8fd4c1cbe7..0000000000
--- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "iyzOhKe7WcJvxmQu",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json
index 0a3ba43c86..821225907e 100644
--- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -1,28 +1,91 @@
 {
 	"type": "process",
 	"name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.08 Extra Fine Snapmaker U1 (0.4 nozzle);0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle);0.08 Extra Fine Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.08",
 	"from": "system",
 	"setting_id": "Tayg0K1WRyJMLoke",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "18",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
 	"wipe_tower_cone_angle": "15",
 	"wipe_tower_extra_spacing": "120%",
 	"enable_arc_fitting": "0",
-	"outer_wall_speed": "100",
+	"outer_wall_speed": [
+		"100",
+		"500",
+		"100",
+		"500",
+		"100",
+		"500",
+		"100",
+		"500"
+	],
 	"precise_outer_wall": "1",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"450",
+		"600",
+		"450",
+		"600",
+		"450",
+		"600",
+		"450",
+		"600"
+	],
+	"inner_wall_speed": [
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index b9e42b5d79..0000000000
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "CaOHxJpx23e32eZm",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json
index 2aeb309d58..bff8ea47e6 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -1,18 +1,33 @@
 {
 	"type": "process",
 	"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.08 High Quality Snapmaker U1 (0.2 nozzle);0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.08_nozzle_0.2",
 	"from": "system",
 	"setting_id": "6ExpMU3Wq4J1R7wy",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
-	"default_acceleration": "4000",
+	"default_acceleration": [
+		"4000"
+	],
 	"elefant_foot_compensation": "0.15",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -20,10 +35,62 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "18",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index a7141e48f1..0000000000
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "3Jsj1rKIzF9dhszS",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json
index 107731b2cb..8b12c1409d 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -1,27 +1,75 @@
 {
 	"type": "process",
 	"name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.08 High Quality Snapmaker U1 (0.4 nozzle);0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.08",
 	"from": "system",
 	"setting_id": "Bld9ulv0wFza7OCb",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
-	"default_acceleration": "4000",
-	"gap_infill_speed": "210",
-	"inner_wall_speed": "120",
-	"internal_solid_infill_speed": "150",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"default_acceleration": [
+		"4000"
+	],
+	"gap_infill_speed": [
+		"210"
+	],
+	"inner_wall_speed": [
+		"120",
+		"600",
+		"120",
+		"600",
+		"120",
+		"600",
+		"120",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "150",
-	"top_surface_speed": "150",
+	"sparse_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"top_surface_speed": [
+		"150"
+	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "18",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -32,5 +80,25 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index c81c177341..0000000000
--- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "Dk5x3oI8wrO1SYDF",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json
index ea8c719085..fc2378404f 100644
--- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.08 Standard Snapmaker U1 (0.2 nozzle);0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.08 Standard Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.08_nozzle_0.2",
 	"from": "system",
 	"setting_id": "loFrCYH9ux2L5JpZ",
@@ -8,7 +9,8 @@
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -16,10 +18,72 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "18",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index ab2f3430c6..0000000000
--- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "AEdUWWIQuuIvPX48",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json
index 6fc26cd55f..80a6b49330 100644
--- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -1,18 +1,33 @@
 {
 	"type": "process",
 	"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.10 High Quality Snapmaker U1 (0.2 nozzle);0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.10 High Quality Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.10_nozzle_0.2",
 	"from": "system",
 	"setting_id": "BfLpmnJnSBYBFInR",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
-	"default_acceleration": "4000",
+	"default_acceleration": [
+		"4000"
+	],
 	"elefant_foot_compensation": "0.15",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -20,10 +35,62 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "28",
 	"prime_volume": "25",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index 9dbcbb12da..0000000000
--- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "k5ltb2fjXfHavuJl",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json
index d33ce1c083..8bd076ec2c 100644
--- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.10 Standard Snapmaker U1 (0.2 nozzle);0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.10 Standard Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.10_nozzle_0.2",
 	"from": "system",
 	"setting_id": "SOq962UWv1ml1Mk0",
@@ -8,7 +9,8 @@
 	"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -23,5 +25,67 @@
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
 	"wipe_tower_wall_type": "rib",
-	"slowdown_for_curled_perimeters": "0"
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index 77bb9d98a9..0000000000
--- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "68ArVT2y9MR8cLZ1",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json
index 6de6d483da..5b82a0021a 100644
--- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -1,16 +1,20 @@
 {
 	"type": "process",
 	"name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.12 Fine Snapmaker U1 (0.4 nozzle);0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle);0.12 Fine Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.12",
 	"from": "system",
 	"setting_id": "xBU1j8ldOefYfosp",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -24,5 +28,65 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"430",
+		"600",
+		"430",
+		"600",
+		"430",
+		"600",
+		"430",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600",
+		"350",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index e052a9e517..0000000000
--- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "m9GIExQJEdmIA0t2",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json
index a5f215d7f3..7de2bca333 100644
--- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -1,26 +1,74 @@
 {
 	"type": "process",
 	"name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.12 High Quality Snapmaker U1 (0.4 nozzle);0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.12 High Quality Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.12",
 	"from": "system",
 	"setting_id": "WNWFsx5DJtCRAlFl",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
-	"default_acceleration": "4000",
-	"gap_infill_speed": "230",
-	"inner_wall_speed": "150",
-	"internal_solid_infill_speed": "180",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"default_acceleration": [
+		"4000"
+	],
+	"gap_infill_speed": [
+		"230"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"180",
+		"600",
+		"180",
+		"600",
+		"180",
+		"600",
+		"180",
+		"600"
+	],
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "180",
-	"top_surface_speed": "150",
+	"sparse_infill_speed": [
+		"180",
+		"600",
+		"180",
+		"600",
+		"180",
+		"600",
+		"180",
+		"600"
+	],
+	"top_surface_speed": [
+		"150"
+	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"prime_tower_width": "30",
 	"prime_volume": "27",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
 	"wipe_tower_cone_angle": "15",
@@ -33,5 +81,25 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index dc46dd6014..0000000000
--- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "VYRDtZXoZWqcHBJP",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json
index 632d9614f7..20f1c91813 100644
--- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.12 Standard Snapmaker U1 (0.2 nozzle);0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.12 Standard Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.12_nozzle_0.2",
 	"from": "system",
 	"setting_id": "KHC1zpxpuvaUEzvf",
@@ -8,7 +9,8 @@
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -16,10 +18,72 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "28",
 	"prime_volume": "27",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json
deleted file mode 100644
index 08451b8fa7..0000000000
--- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle)",
-	"inherits": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
-	"from": "system",
-	"setting_id": "NPQCD2bScfCwZAGP",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.2 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json
index 0de823db1f..294b1329f3 100644
--- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
+	"renamed_from": "0.14 Standard Snapmaker U1 (0.2 nozzle);0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.14 Standard Snapmaker U1 (0.2 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.14_nozzle_0.2",
 	"from": "system",
 	"setting_id": "NGJoV0n6T510y9wM",
@@ -8,7 +9,8 @@
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.2 nozzle)"
+		"Snapmaker U1 (0.2 nozzle)",
+		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
@@ -16,10 +18,72 @@
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "32",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_wall_type": "rib"
+	"wipe_tower_wall_type": "rib",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index cbf3b13b75..0000000000
--- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "Wkl0CFo4qXv79E1W",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json
index 1306485d6f..8ecdd89b6e 100644
--- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -1,27 +1,75 @@
 {
 	"type": "process",
 	"name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.16 High Quality Snapmaker U1 (0.4 nozzle);0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.16 High Quality Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.16",
 	"from": "system",
 	"setting_id": "Ofe17WrGQ3MOrqNe",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
-	"default_acceleration": "4000",
-	"gap_infill_speed": "250",
-	"inner_wall_speed": "150",
-	"internal_solid_infill_speed": "200",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_speed": "60",
+	"default_acceleration": [
+		"4000"
+	],
+	"gap_infill_speed": [
+		"250"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"outer_wall_acceleration": [
+		"2000"
+	],
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_pattern": "gyroid",
-	"sparse_infill_speed": "200",
-	"top_surface_speed": "150",
+	"sparse_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"top_surface_speed": [
+		"150"
+	],
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "36",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -33,5 +81,25 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index 9ed96478f2..0000000000
--- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "xGaLQMk52ZD5ZqJh",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json
index 838f250e8c..bca9e8d7fb 100644
--- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
@@ -1,18 +1,22 @@
 {
 	"type": "process",
 	"name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.16 Optimal Snapmaker U1 (0.4 nozzle);0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle);0.16 Optimal Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.16",
 	"from": "system",
 	"setting_id": "ERcgRLp5bQo1hgz8",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "36",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -23,5 +27,65 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 9410d42ef5..0000000000
--- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "aW5X8f9lb5haKlWj",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json
index 88fbb33812..b2c06523ac 100644
--- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.18 Standard Snapmaker U1 (0.6 nozzle);0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.18 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.18_nozzle_0.6",
 	"from": "system",
 	"setting_id": "XGSrVgnsUFv6uCRs",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"layer_height": "0.25",
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
@@ -24,7 +28,69 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index 1a680858b1..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "g8JVHkdQOCWRZZf5",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json
index be894aa221..87a70ad4bb 100644
--- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -1,21 +1,85 @@
 {
 	"type": "process",
 	"name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.20 Quality Snapmaker U1 (0.4 nozzle);0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle);0.20 Quality Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.20",
 	"from": "system",
 	"setting_id": "BBXxXQCXCme2Mvy0",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
 	"wipe_tower_cone_angle": "15",
 	"prime_tower_brim_width": "5",
-	"initial_layer_print_height": "0.25"
+	"initial_layer_print_height": "0.25",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index de45cf42f9..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "5EHp34T55kiTtt68",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json
index 443afe55dd..532737eb20 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
@@ -1,22 +1,86 @@
 {
 	"type": "process",
 	"name": "0.20 Standard @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.20 Standard Snapmaker U1 (0.4 nozzle);0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle);0.20 Standard Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.20",
 	"from": "system",
 	"setting_id": "XR5r9SuWmSag5Qjo",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "45",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
 	"wipe_tower_cone_angle": "15",
 	"prime_tower_brim_width": "5",
-	"initial_layer_print_height": "0.25"
+	"initial_layer_print_height": "0.25",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index dbaa4cac78..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "l3KpKbqxUGKTjO0t",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json
index 5c87ff68d0..d605622b96 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.20 Standard Snapmaker U1 (0.6 nozzle);0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.20 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.6_common",
 	"from": "system",
 	"setting_id": "6VM4QhgvHUmyf2um",
@@ -8,11 +9,14 @@
 	"description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.",
 	"layer_height": "0.20",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
@@ -20,5 +24,65 @@
 	"prime_tower_brim_width": "5",
 	"initial_layer_print_height": "0.25",
 	"top_shell_layers": "4",
-	"bottom_shell_layers": "3"
+	"bottom_shell_layers": "3",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index cc1c08848c..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "jTYxPrkfNAXXeElO",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json
index 1d051fc801..cc36e8f20f 100644
--- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
@@ -1,21 +1,34 @@
 {
 	"type": "process",
 	"name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.20 Strength Snapmaker U1 (0.4 nozzle);0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle);0.20 Strength Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.20",
 	"from": "system",
 	"setting_id": "bYnMOZxTq83EwIyd",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
-	"outer_wall_speed": "60",
+	"outer_wall_speed": [
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500",
+		"60",
+		"500"
+	],
 	"sparse_infill_density": "25%",
 	"wall_loops": "6",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "45",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -26,5 +39,55 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index d305323789..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Support @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "o2uNeeRv8JNXAuD0",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json
index 577065ca3f..459f3afefa 100644
--- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
@@ -1,18 +1,22 @@
 {
 	"type": "process",
 	"name": "0.20 Support @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.20 Support Snapmaker U1 (0.4 nozzle);0.20 Support @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.20",
 	"from": "system",
 	"setting_id": "4whjHJVCN44w8SPE",
 	"instantiation": "true",
 	"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "40",
 	"prime_volume": "15",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
@@ -21,5 +25,65 @@
 	"enable_support": "1",
 	"initial_layer_print_height": "0.25",
 	"support_interface_spacing": "0",
-	"support_interface_top_layers": "3"
+	"support_interface_top_layers": "3",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index 6bbd70ca8b..0000000000
--- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "rLdRXBKLSDdjsSs9",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json
index 3d1887bea9..6cfc2cba6d 100644
--- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.20 Support W Snapmaker U1 (0.4 nozzle);0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support W Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.20",
 	"from": "system",
 	"setting_id": "M9JhI2roLcP4jYks",
@@ -10,16 +11,78 @@
 	"support_top_z_distance": "0.2",
 	"support_interface_loop_pattern": "1",
 	"support_interface_spacing": "0",
-	"support_interface_speed": "80",
 	"support_filament": "0",
 	"support_interface_filament": "0",
 	"enable_prime_tower": "1",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "50",
 	"prime_volume": "38",
-	"slowdown_for_curled_perimeters": "0",
-	"standby_temperature_delta": "-150"
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
+	"standby_temperature_delta": "-150",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600",
+		"270",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600",
+		"250",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index ea99859bc7..0000000000
--- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "cZfx1x9K6oYUG6nK",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json
index 8e09376daf..90c2cb8f5c 100644
--- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -1,18 +1,22 @@
 {
 	"type": "process",
 	"name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.24 Draft Snapmaker U1 (0.4 nozzle);0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle);0.24 Draft Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.24",
 	"from": "system",
 	"setting_id": "MYRo7jTenu7F0Zv4",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "54",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
@@ -23,5 +27,65 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600",
+		"230",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 1072a08efa..0000000000
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "PvF43C7HiDhd7BKg",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json
index 2fa2eeabdb..883fef3cc2 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.24 Standard Snapmaker U1 (0.6 nozzle);0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.24 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.24_nozzle_0.6",
 	"from": "system",
 	"setting_id": "BziJYuA5U5gWm6FM",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "55",
@@ -23,8 +27,70 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
deleted file mode 100644
index 7844a38bf1..0000000000
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"inherits": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
-	"from": "system",
-	"setting_id": "FAVs0dNRa86OWdzy",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json
index 316bb0dbee..a47d78f04e 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
+	"renamed_from": "0.24 Standard Snapmaker U1 (0.8 nozzle);0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.24 Standard Snapmaker U1 (0.8 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.24_nozzle_0.8",
 	"from": "system",
 	"setting_id": "QcJ5p9h0eYUb91ak",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"min_width_top_surface": "90",
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
@@ -24,7 +28,69 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index bc50c410c5..0000000000
--- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "21Yht5aHJVG0XebG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json
index c7d7abf58a..ad0960c02a 100644
--- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
@@ -1,29 +1,83 @@
 {
 	"type": "process",
 	"name": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.25 Benchy Snapmaker U1 (0.4 nozzle);0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle);0.25 Benchy Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1",
 	"from": "system",
 	"setting_id": "deA4Xg6QxFTKOYZy",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"elefant_foot_compensation": "0.15",
 	"top_shell_layers": "3",
 	"top_shell_thickness": "0.5",
-	"initial_layer_speed": "100",
-	"initial_layer_infill_speed": "180",
-	"outer_wall_speed": "180",
-	"inner_wall_speed": "200",
-	"sparse_infill_speed": "200",
-	"internal_solid_infill_speed": "200",
-	"top_surface_speed": "180",
-	"gap_infill_speed": "200",
+	"initial_layer_speed": [
+		"100"
+	],
+	"initial_layer_infill_speed": [
+		"180"
+	],
+	"outer_wall_speed": [
+		"180",
+		"500",
+		"180",
+		"500",
+		"180",
+		"500",
+		"180",
+		"500"
+	],
+	"inner_wall_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"sparse_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"top_surface_speed": [
+		"180"
+	],
+	"gap_infill_speed": [
+		"200"
+	],
 	"ironing_speed": "30",
-	"enable_overhang_speed": "0",
-	"overhang_1_4_speed": "180",
-	"overhang_2_4_speed": "20",
-	"overhang_3_4_speed": "10",
+	"enable_overhang_speed": [
+		"0"
+	],
+	"overhang_1_4_speed": [
+		"180"
+	],
+	"overhang_2_4_speed": [
+		"20"
+	],
+	"overhang_3_4_speed": [
+		"10"
+	],
 	"layer_height": "0.25",
 	"initial_layer_print_height": "0.25",
 	"detect_overhang_wall": "0",
@@ -45,15 +99,57 @@
 	"sparse_infill_line_width": "0.5",
 	"top_surface_line_width": "0.5",
 	"bottom_shell_layers": "2",
-	"initial_layer_travel_speed": "100%",
-	"bridge_acceleration": "3000",
-	"bridge_speed": "100",
-	"default_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
-	"internal_solid_infill_acceleration": "3000",
-	"outer_wall_acceleration": "1600",
-	"small_perimeter_speed": "200",
-	"sparse_infill_acceleration": "3000",
-	"top_surface_acceleration": "3000",
-	"initial_layer_acceleration": "1600"
+	"initial_layer_travel_speed": [
+		"100%"
+	],
+	"bridge_acceleration": [
+		"3000"
+	],
+	"bridge_speed": [
+		"100"
+	],
+	"default_acceleration": [
+		"3000"
+	],
+	"inner_wall_acceleration": [
+		"3000"
+	],
+	"internal_solid_infill_acceleration": [
+		"3000"
+	],
+	"outer_wall_acceleration": [
+		"1600"
+	],
+	"small_perimeter_speed": [
+		"200"
+	],
+	"sparse_infill_acceleration": [
+		"3000"
+	],
+	"top_surface_acceleration": [
+		"3000"
+	],
+	"initial_layer_acceleration": [
+		"1600"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json
deleted file mode 100644
index bd58038ed9..0000000000
--- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle)",
-	"inherits": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
-	"from": "system",
-	"setting_id": "ofB4cQcZJ2Lkze83",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.4 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json
index 8829efafdb..93a4f26ef5 100644
--- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -1,17 +1,21 @@
 {
 	"type": "process",
 	"name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
+	"renamed_from": "0.28 Extra Draft Snapmaker U1 (0.4 nozzle);0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle);0.28 Extra Draft Snapmaker U1 (0.4 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.28",
 	"from": "system",
 	"setting_id": "0fSeyAIS6z75A1r3",
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
 	"compatible_printers": [
-		"Snapmaker U1 (0.4 nozzle)"
+		"Snapmaker U1 (0.4 nozzle)",
+		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"prime_tower_width": "30",
 	"prime_volume": "63",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"wipe_tower_filament": "0",
 	"prime_tower_brim_width": "5",
 	"wipe_tower_cone_angle": "15",
@@ -23,5 +27,65 @@
 	"support_type": "tree(auto)",
 	"wipe_tower_extra_rib_length": "8",
 	"wipe_tower_wall_type": "rib",
-	"gap_fill_target": "topbottom"
+	"gap_fill_target": "topbottom",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"outer_wall_speed": [
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500",
+		"200",
+		"500"
+	],
+	"inner_wall_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600",
+		"200",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 00494a3516..0000000000
--- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "K3aD6VMSmWStekaW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json
index defbc6740b..1c5fa45ffd 100644
--- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.30 Draft Snapmaker U1 (0.6 nozzle);0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle);0.30 Draft Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.6_common",
 	"from": "system",
 	"setting_id": "Tk3tG3RGJ8dwXFKf",
@@ -8,12 +9,15 @@
 	"description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.",
 	"layer_height": "0.30",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "68",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
@@ -22,8 +26,64 @@
 	"initial_layer_print_height": "0.30",
 	"top_shell_layers": "3",
 	"bottom_shell_layers": "3",
-	"outer_wall_speed": "220",
-	"inner_wall_speed": "330",
-	"sparse_infill_speed": "300",
-	"internal_solid_infill_speed": "280"
+	"outer_wall_speed": [
+		"220",
+		"500",
+		"220",
+		"500",
+		"220",
+		"500",
+		"220",
+		"500"
+	],
+	"inner_wall_speed": [
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600"
+	],
+	"sparse_infill_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"280",
+		"600",
+		"280",
+		"600",
+		"280",
+		"600",
+		"280",
+		"600"
+	],
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 46de759eb1..0000000000
--- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "G8jjRPwut6AkuW7w",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json
index 92bebf6219..43833fe9c1 100644
--- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.30 Standard Snapmaker U1 (0.6 nozzle);0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.30 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.30_nozzle_0.6",
 	"from": "system",
 	"setting_id": "TWxp6qgz1DJa8Ngo",
@@ -8,11 +9,14 @@
 	"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "68",
@@ -22,8 +26,70 @@
 	"wipe_tower_wall_type": "rib",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 40e31b320f..0000000000
--- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "4S1DO4sXQX2RXSjC",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json
index f268a92446..568e838002 100644
--- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.30 Strength Snapmaker U1 (0.6 nozzle);0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle);0.30 Strength Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.30_nozzle_0.6",
 	"from": "system",
 	"setting_id": "CBaL0vgwtgsd6Snj",
@@ -10,11 +11,14 @@
 	"sparse_infill_density": "25%",
 	"wall_loops": "4",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_width": "30",
 	"prime_volume": "68",
 	"seam_gap": "15%",
@@ -24,8 +28,70 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "5",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_type": "tree(auto)",
-	"wipe_tower_extra_spacing": "120%"
+	"wipe_tower_extra_spacing": "120%",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
deleted file mode 100644
index c74cf8b309..0000000000
--- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"inherits": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
-	"from": "system",
-	"setting_id": "6k3IeQoysYKUxTxG",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json
index de7559f827..010c82bb91 100644
--- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
+	"renamed_from": "0.32 Standard Snapmaker U1 (0.8 nozzle);0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.32 Standard Snapmaker U1 (0.8 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.32_nozzle_0.8",
 	"from": "system",
 	"setting_id": "iVRz2B0VBIBL1xVd",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "72",
@@ -25,8 +29,70 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index aab911513d..0000000000
--- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "4c5vbxTAK6TVyTpg",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json
index 6dc9f26329..ee1f213106 100644
--- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.36 Standard Snapmaker U1 (0.6 nozzle);0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.36 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.36_nozzle_0.6",
 	"from": "system",
 	"setting_id": "C0PiCFd3P222knX9",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "81",
@@ -23,8 +27,70 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index 3d3a341e2b..0000000000
--- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "vWhACedmOjulskG0",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json
index b18e30c210..ab4831845f 100644
--- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.40 Extra Draft Snapmaker U1 (0.6 nozzle);0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle);0.40 Extra Draft Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.6_common",
 	"from": "system",
 	"setting_id": "rAUffOThYmj9FVTw",
@@ -8,12 +9,15 @@
 	"description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.",
 	"layer_height": "0.40",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"prime_volume": "90",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"wipe_tower_filament": "0",
 	"preheat_time": "30",
@@ -22,9 +26,65 @@
 	"initial_layer_print_height": "0.35",
 	"top_shell_layers": "3",
 	"bottom_shell_layers": "3",
-	"outer_wall_speed": "220",
-	"inner_wall_speed": "330",
-	"sparse_infill_speed": "320",
-	"internal_solid_infill_speed": "300",
-	"wall_loops": "2"
+	"outer_wall_speed": [
+		"220",
+		"500",
+		"220",
+		"500",
+		"220",
+		"500",
+		"220",
+		"500"
+	],
+	"inner_wall_speed": [
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600",
+		"330",
+		"600"
+	],
+	"sparse_infill_speed": [
+		"320",
+		"600",
+		"320",
+		"600",
+		"320",
+		"600",
+		"320",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600",
+		"300",
+		"600"
+	],
+	"wall_loops": "2",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
deleted file mode 100644
index 1981348438..0000000000
--- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"inherits": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
-	"from": "system",
-	"setting_id": "YEOmDIj6IFBHwvTr",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json
index b0cf935465..a935192df9 100644
--- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+	"renamed_from": "0.40 Standard Snapmaker U1 (0.8 nozzle);0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.40 Standard Snapmaker U1 (0.8 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.40_nozzle_0.8",
 	"from": "system",
 	"setting_id": "VqkPgUtZi159BKpJ",
@@ -8,11 +9,14 @@
 	"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "90",
@@ -26,8 +30,70 @@
 	"min_width_top_surface": "200%",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "40",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json
deleted file mode 100644
index cca40610a9..0000000000
--- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle)",
-	"inherits": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
-	"from": "system",
-	"setting_id": "kXJPwKEtZ6kSTvcm",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.6 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json
index eaa04faadc..705021d73d 100644
--- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
+	"renamed_from": "0.42 Standard Snapmaker U1 (0.6 nozzle);0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.42 Standard Snapmaker U1 (0.6 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.42_nozzle_0.6",
 	"from": "system",
 	"setting_id": "SVJzhQA3KQetRZmo",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.6 nozzle)"
+		"Snapmaker U1 (0.6 nozzle)",
+		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"precise_z_height": "0",
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
@@ -23,8 +27,70 @@
 	"wipe_tower_wall_type": "rib",
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
deleted file mode 100644
index b976586099..0000000000
--- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"inherits": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
-	"from": "system",
-	"setting_id": "BTuUnaHxKcjQlOv9",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json
index 599cf24db5..c0585abda9 100644
--- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
+	"renamed_from": "0.48 Standard Snapmaker U1 (0.8 nozzle);0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.48 Standard Snapmaker U1 (0.8 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.48_nozzle_0.8",
 	"from": "system",
 	"setting_id": "5H6JWChFEo3zqoHQ",
@@ -8,11 +9,14 @@
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
-	"internal_bridge_speed": "100%",
+	"internal_bridge_speed": [
+		"100%"
+	],
 	"prime_tower_brim_width": "5",
 	"prime_tower_width": "30",
 	"prime_volume": "108",
@@ -23,8 +27,70 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json
deleted file mode 100644
index 091c301acf..0000000000
--- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle).json	
+++ /dev/null
@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle)",
-	"inherits": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
-	"from": "system",
-	"setting_id": "VrtVj7ZWFPegxXaW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"Snapmaker U1 (0.8 High Flow nozzle)"
-	],
-	"inner_wall_speed": [
-		"600"
-	],
-	"outer_wall_speed": [
-		"500"
-	],
-	"internal_solid_infill_speed": [
-		"600"
-	],
-	"sparse_infill_speed": [
-		"600"
-	]
-}
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json
index ca728fe66a..22beae020e 100644
--- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
+	"renamed_from": "0.56 Standard Snapmaker U1 (0.8 nozzle);0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.56 Standard Snapmaker U1 (0.8 High Flow nozzle)",
 	"inherits": "fdm_process_U1_0.56_nozzle_0.8",
 	"from": "system",
 	"setting_id": "JZEIXOUT33c7MrZj",
@@ -8,7 +9,8 @@
 	"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
 	"elefant_foot_compensation": "0.15",
 	"compatible_printers": [
-		"Snapmaker U1 (0.8 nozzle)"
+		"Snapmaker U1 (0.8 nozzle)",
+		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
@@ -22,8 +24,70 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
-	"slowdown_for_curled_perimeters": "0",
+	"slowdown_for_curled_perimeters": [
+		"0"
+	],
 	"standby_temperature_delta": "-150",
 	"support_threshold_angle": "35",
-	"support_type": "tree(auto)"
+	"support_type": "tree(auto)",
+	"print_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Direct Drive Standard",
+		"Direct Drive High Flow"
+	],
+	"print_extruder_id": [
+		"1",
+		"1",
+		"2",
+		"2",
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"sparse_infill_speed": [
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600",
+		"100",
+		"600"
+	],
+	"outer_wall_speed": [
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500",
+		"120",
+		"500"
+	],
+	"inner_wall_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	],
+	"internal_solid_infill_speed": [
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600",
+		"150",
+		"600"
+	]
 }
diff --git a/scripts/orca_profile_tool.py b/scripts/orca_profile_tool.py
index f7f622c8c0..6728c47127 100755
--- a/scripts/orca_profile_tool.py
+++ b/scripts/orca_profile_tool.py
@@ -1757,18 +1757,20 @@ def check_variant_names(profiles_dir, vendor):
 
 
 def check_variant_arrays(profiles_dir, vendor, strict=False):
-    """Every variant array an instantiated preset writes is exactly its
-    variant length x stride wide, and a printer's variant layout keys agree.
+    """Variant arrays have the declared width or a shared single value,
+    and a printer's variant layout keys agree.
 
     Only instantiated presets are judged, each at the variant length of its composed
     config (_variant_length's); a base is not, since what it writes counts only where
     it reaches a preset that does not override it. A full-width array holds one
-    value per variant; any other width is an error, one value included and whatever
-    the values. A key the preset does not write takes what reaches it - the default,
+    value per variant; a single value at stride 1 broadcasts to every variant.
+    Short, nonempty filament arrays use element zero for missing variants,
+    matching the C++ loader. Other widths are errors. A key the preset does not write
+    takes what reaches it - the default,
     or an array it inherits or includes - which the loader sizes to the preset, and
     is not checked. With strict, every instantiated preset also holds each key that
-    reaches it at its own width, so a preset with other variants than the file its
-    array comes from restates the array. The machine_max_* limits hold
+    reaches it at its own width or as a shared single value, so a preset with
+    other variants restates non-shared arrays when necessary. The machine_max_* limits hold
     a (normal, silent) pair per variant. A process that lists variants pairs each
     with its extruder id (extruder 1 everywhere when absent); a machine's layout keys
     are held to _check_printer_layout, which reports a printer_extruder_id that does
@@ -1790,7 +1792,7 @@ def check_variant_arrays(profiles_dir, vendor, strict=False):
                 continue
             value, path = config[key]
             width, need = len(_as_list(value)), variant_length * stride
-            if width == need:
+            if width == need or (stride == 1 and (width == 1 or (ptype == "filament" and 0 < width < need))):
                 continue
             print_error(f'{rel}: "{key}" has {width} values for variant length {variant_length}'
                         f"{' (' + reason + ')' if reason else ''} at stride {stride}, "
diff --git a/scripts/tests/test_profile_tool.py b/scripts/tests/test_profile_tool.py
index a4e9a6f81b..bef4651f97 100644
--- a/scripts/tests/test_profile_tool.py
+++ b/scripts/tests/test_profile_tool.py
@@ -968,21 +968,25 @@ class TestFixVariant(TreeCase):
                     retraction_length=["0.8", "1.2"], z_hop=["0.4"],
                     machine_max_speed_x=["500", "200"])
         errors, out = self.width_errors()
-        self.assertEqual(errors, 2, out)
-        self.assertIn('M.json: "z_hop" has 1 values for variant length 2 (no '
-                      'printer_extruder_variant, so one default variant per extruder) at stride 1, '
-                      'which takes 2', out)
+        self.assertEqual(errors, 1, out)
+        self.assertNotIn('"z_hop"', out)
         self.assertIn('M.json: "machine_max_speed_x" has 2 values for variant length 2', out)
         self.assertNotIn("retraction_length", out)
 
-    def test_one_value_is_an_error_where_the_list_has_more_variants(self):
+    def test_one_value_applies_to_every_variant(self):
         self.preset("process/P.json", instantiation="true", outer_wall_speed=["30"],
                     print_extruder_id=["1", "1"],
                     print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow"])
         errors, out = self.width_errors()
-        self.assertEqual(errors, 1, out)
-        self.assertIn('P.json: "outer_wall_speed" has 1 values for variant length 2 at stride 1, '
-                      'which takes 2', out)
+        self.assertEqual(errors, 0, out)
+        self.assertEqual(self.width_errors("strict")[0], 0)
+
+    def test_a_short_filament_array_uses_element_zero_for_missing_variants(self):
+        self.preset("filament/F.json", instantiation="true", pressure_advance=["0.02", "0.04"],
+                    filament_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow", "Bowden Standard"])
+        errors, out = self.width_errors()
+        self.assertEqual(errors, 0, out)
+        self.assertEqual(self.width_errors("strict")[0], 0)
 
     def test_one_value_is_padded_to_every_variant(self):
         self.preset("machine/M.json", instantiation="true", nozzle_diameter=["0.4"] * 3,
@@ -1025,13 +1029,11 @@ class TestFixVariant(TreeCase):
         self.assertNotIn("outer_wall_speed", self.t.read("V", "process/S1.json"))
         self.assertEqual(self.width_errors("strict")[0], 0)
 
-    def test_an_inherited_array_is_checked_and_restated_only_when_strict(self):
+    def test_an_inherited_single_value_is_valid_and_can_be_explicitly_expanded(self):
         self.processes(["30"])
         self.assertEqual(self.width_errors()[0], 0)
         errors, out = self.width_errors("strict")
-        self.assertEqual(errors, 1, out)
-        self.assertIn('process/D1.json: "outer_wall_speed" has 1 values for variant length 2 at '
-                      'stride 1, which takes 2 (it comes from V/process/common.json)', out)
+        self.assertEqual(errors, 0, out)
         before = self.t.bytes_map()
         self.run_command("fix-variant")
         self.assertEqual(self.t.bytes_map(), before)
diff --git a/src/dev-utils/OrcaSlicer_profile_validator.cpp b/src/dev-utils/OrcaSlicer_profile_validator.cpp
index 4bb7eab64d..e41ce737ca 100644
--- a/src/dev-utils/OrcaSlicer_profile_validator.cpp
+++ b/src/dev-utils/OrcaSlicer_profile_validator.cpp
@@ -314,6 +314,13 @@ DynamicPrintConfig slice_config(PresetBundle &bundle)
             fmap[i] = int(i % nozzles) + 1;
     }
 
+    // A fresh printer selection uses its declared nozzle volumes, just like the
+    // app. Otherwise a high-flow preset is silently sliced with Standard tuning.
+    bundle.reset_default_nozzle_volume_type();
+    auto &filament_map = bundle.project_config.option<ConfigOptionInts>("filament_map", true)->values;
+    bundle.project_config.option<ConfigOptionInts>("filament_volume_map", true)->values =
+        bundle.get_default_nozzle_volume_types_for_filaments(filament_map);
+
     DynamicPrintConfig cfg = bundle.full_config();
     cfg.set_key_value("enable_prime_tower", new ConfigOptionBool(true)); // force a purge tower so the change is detectable
     // The map above drives full_config()'s per-filament variant collapse; fmmManual on the sliced config
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 440f3e761a..0d744b5003 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -9459,6 +9459,19 @@ std::set<std::string> print_options_with_variant = {
 std::set<std::string> filament_options_with_variant = {
     "filament_flow_ratio",
     "filament_max_volumetric_speed",
+    // Variant arrays use element zero when the selected column is absent.
+    // A singleton therefore retains the same tuning for every nozzle variant.
+    "enable_pressure_advance",
+    "pressure_advance",
+    "fan_min_speed",
+    "fan_max_speed",
+    "additional_cooling_fan_speed",
+    "filament_minimal_purge_on_wipe_tower",
+    "filament_multitool_ramming",
+    "filament_multitool_ramming_volume",
+    "filament_multitool_ramming_flow",
+    "nozzle_temperature_range_low",
+    "nozzle_temperature_range_high",
     // Per-variant ramming / pre-cooling / nozzle-change filament overrides
     "filament_ramming_volumetric_speed",
     "filament_pre_cooling_temperature",
diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp
index 5a58ec7b6c..3817799b2f 100644
--- a/src/slic3r/GUI/ConfigManipulation.cpp
+++ b/src/slic3r/GUI/ConfigManipulation.cpp
@@ -78,12 +78,12 @@ void ConfigManipulation::set_option_label(const std::string& opt_key, const wxSt
         cb_set_option_label(opt_key, label, opt_index);
 }
 
-void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrintConfig *config) {
+void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrintConfig *config, unsigned int variant_index) {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
 
     // Get the selected filament type
     std::string filament_type = "";
@@ -123,16 +123,16 @@ void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrint
     }
 }
 
-void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *config)
+void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *config, unsigned int variant_index)
 {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
 
     if (config->has("nozzle_temperature")) {
-        if (config->opt_int("nozzle_temperature", 0) < temperature_range_low || config->opt_int("nozzle_temperature", 0) > temperature_range_high) {
+        if (config->opt_int("nozzle_temperature", variant_index) < temperature_range_low || config->opt_int("nozzle_temperature", variant_index) > temperature_range_high) {
             wxString msg_text = _(L("The nozzle may become clogged when the temperature is out of the recommended range.\nPlease make sure whether to use this temperature to print.\n\n"));
             msg_text += wxString::Format(_L("The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius."), temperature_range_low, temperature_range_high);
             MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
@@ -143,17 +143,17 @@ void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *conf
     }
 }
 
-void ConfigManipulation::check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config)
+void ConfigManipulation::check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config, unsigned int variant_index)
 {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
 
     if (config->has("nozzle_temperature_initial_layer")) {
-        if (config->opt_int("nozzle_temperature_initial_layer", 0) < temperature_range_low ||
-            config->opt_int("nozzle_temperature_initial_layer", 0) > temperature_range_high)
+        if (config->opt_int("nozzle_temperature_initial_layer", variant_index) < temperature_range_low ||
+            config->opt_int("nozzle_temperature_initial_layer", variant_index) > temperature_range_high)
         {
             wxString msg_text = _(L("The nozzle may become clogged when the temperature is out of the recommended range.\nPlease make sure whether to use this temperature to print.\n\n"));
             msg_text += wxString::Format(_L("The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius."), temperature_range_low, temperature_range_high);
@@ -1293,15 +1293,15 @@ int ConfigManipulation::show_spiral_mode_settings_dialog(bool is_object_config)
     return answer;
 }
 
-bool ConfigManipulation::get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high)
+bool ConfigManipulation::get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high, unsigned int variant_index)
 {
     bool range_low_exist = false, range_high_exist = false;
     if (config->has("nozzle_temperature_range_low")) {
-        range_low       = config->opt_int("nozzle_temperature_range_low", (unsigned int) 0);
+        range_low       = config->opt_int("nozzle_temperature_range_low", variant_index);
         range_low_exist       = true;
     }
     if (config->has("nozzle_temperature_range_high")) {
-        range_high       = config->opt_int("nozzle_temperature_range_high", (unsigned int) 0);
+        range_high       = config->opt_int("nozzle_temperature_range_high", variant_index);
         range_high_exist       = true;
     }
     return range_low_exist && range_high_exist;
diff --git a/src/slic3r/GUI/ConfigManipulation.hpp b/src/slic3r/GUI/ConfigManipulation.hpp
index ac53ffb4bb..bff41effad 100644
--- a/src/slic3r/GUI/ConfigManipulation.hpp
+++ b/src/slic3r/GUI/ConfigManipulation.hpp
@@ -79,9 +79,9 @@ public:
     void    apply_null_fff_config(DynamicPrintConfig *config, std::vector<std::string> const &keys, std::map<ObjectBase*, ModelConfig*> const & configs);
 
     //BBS: FFF filament nozzle temperature range
-    void    check_nozzle_recommended_temperature_range(DynamicPrintConfig *config);
-    void    check_nozzle_temperature_range(DynamicPrintConfig* config);
-    void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
+    void    check_nozzle_recommended_temperature_range(DynamicPrintConfig *config, unsigned int variant_index = 0);
+    void    check_nozzle_temperature_range(DynamicPrintConfig* config, unsigned int variant_index = 0);
+    void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config, unsigned int variant_index = 0);
     void    check_adaptive_pressure_advance_model(DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
     void    check_chamber_temperature(DynamicPrintConfig* config);
@@ -104,7 +104,7 @@ public:
     int    show_spiral_mode_settings_dialog(bool is_object_config = false);
 
 private:
-    bool get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high);
+    bool get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high, unsigned int variant_index);
 };
 
 } // GUI
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index b5b93fca17..ac50bfc3a8 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -4396,16 +4396,16 @@ void TabFilament::build()
         optgroup->append_single_option_line("temperature_vitrification", "material_basic_information#softening-temperature");
         optgroup->append_single_option_line("idle_temperature", "material_basic_information#idle-temperature");
         Line line = { L("Recommended nozzle temperature"), L("Recommended nozzle temperature range of this filament. 0 means not set") };
-        line.append_option(optgroup->get_option("nozzle_temperature_range_low"));
-        line.append_option(optgroup->get_option("nozzle_temperature_range_high"));
+        line.append_option(optgroup->get_option("nozzle_temperature_range_low", 0));
+        line.append_option(optgroup->get_option("nozzle_temperature_range_high", 0));
         optgroup->append_line(line);
 
         optgroup->m_on_change = [this, optgroup](t_config_option_key opt_key, boost::any value) {
             DynamicPrintConfig &filament_config = m_preset_bundle->filaments.get_edited_preset().config;
 
             update_dirty();
-            if (!m_postpone_update_ui && (opt_key == "nozzle_temperature_range_low" || opt_key == "nozzle_temperature_range_high")) {
-                m_config_manipulation.check_nozzle_recommended_temperature_range(&filament_config);
+            if (!m_postpone_update_ui && (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_range_low" || opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_range_high")) {
+                m_config_manipulation.check_nozzle_recommended_temperature_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
             }
             on_value_change(opt_key, value);
         };
@@ -4415,8 +4415,8 @@ void TabFilament::build()
         optgroup->append_single_option_line("pellet_flow_coefficient", "printer_basic_information_advanced#pellet-modded-printer");
         optgroup->append_single_option_line("filament_flow_ratio", "material_flow_ratio_and_pressure_advance#flow-ratio", 0);
 
-        optgroup->append_single_option_line("enable_pressure_advance", "material_flow_ratio_and_pressure_advance#pressure-advance");
-        optgroup->append_single_option_line("pressure_advance", "material_flow_ratio_and_pressure_advance#pressure-advance");
+        optgroup->append_single_option_line("enable_pressure_advance", "material_flow_ratio_and_pressure_advance#pressure-advance", 0);
+        optgroup->append_single_option_line("pressure_advance", "material_flow_ratio_and_pressure_advance#pressure-advance", 0);
 
         // Orca: adaptive pressure advance and calibration model
         optgroup->append_single_option_line("adaptive_pressure_advance", "material_flow_ratio_and_pressure_advance#enable-adaptive-pressure-advance-beta");
@@ -4532,11 +4532,11 @@ void TabFilament::build()
             else if (opt_key == "textured_plate_temp" || opt_key == "textured_plate_temp_initial_layer") {
                 m_config_manipulation.check_bed_temperature_difference(BedType::btPTE, &filament_config);
             }
-            else */if (opt_key == "nozzle_temperature") {
-                m_config_manipulation.check_nozzle_temperature_range(&filament_config);
+            else */if (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature") {
+                m_config_manipulation.check_nozzle_temperature_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
             }
-            else if (opt_key == "nozzle_temperature_initial_layer") {
-                m_config_manipulation.check_nozzle_temperature_initial_layer_range(&filament_config);
+            else if (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_initial_layer") {
+                m_config_manipulation.check_nozzle_temperature_initial_layer_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
             }
 
             on_value_change(opt_key, value);
@@ -4571,12 +4571,12 @@ void TabFilament::build()
         optgroup = page->new_optgroup(L("Part cooling fan"), L"param_cooling_part_fan");
         line = { L("Min fan speed threshold"), L("The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time.") };
         line.label_path = "material_cooling#material-part-cooling-fan";
-        line.append_option(optgroup->get_option("fan_min_speed"));
+        line.append_option(optgroup->get_option("fan_min_speed", 0));
         line.append_option(optgroup->get_option("fan_cooling_layer_time"));
         optgroup->append_line(line);
         line = { L("Max fan speed threshold"), L("The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value.") };
         line.label_path = "material_cooling#material-part-cooling-fan";
-        line.append_option(optgroup->get_option("fan_max_speed"));
+        line.append_option(optgroup->get_option("fan_max_speed", 0));
         line.append_option(optgroup->get_option("slow_down_layer_time"));
         optgroup->append_line(line);
         optgroup->append_single_option_line("reduce_fan_stop_start_freq", "material_cooling#keep-fan-always-on");
@@ -4592,7 +4592,7 @@ void TabFilament::build()
         optgroup->append_single_option_line("ironing_fan_speed", "material_cooling#ironing-fan-speed"); // ORCA: Add support for ironing fan speed control
 
         optgroup = page->new_optgroup(L("Auxiliary part cooling fan"), L"param_cooling_aux_fan");
-        optgroup->append_single_option_line("additional_cooling_fan_speed", "material_cooling#auxiliary-part-cooling-fan");
+        optgroup->append_single_option_line("additional_cooling_fan_speed", "material_cooling#auxiliary-part-cooling-fan", 0);
 
         optgroup = page->new_optgroup(L("Exhaust fan"),L"param_cooling_exhaust");
 
@@ -4656,7 +4656,7 @@ void TabFilament::build()
 
     page = add_options_page(L("Multimaterial"), "custom-gcode_multi_material"); // ORCA: icon only visible on placeholders
         optgroup = page->new_optgroup(L("Wipe tower parameters"), "param_tower");
-        optgroup->append_single_option_line("filament_minimal_purge_on_wipe_tower", "material_multimaterial#multimaterial-wipe-tower-parameters");
+        optgroup->append_single_option_line("filament_minimal_purge_on_wipe_tower", "material_multimaterial#multimaterial-wipe-tower-parameters", 0);
         optgroup->append_single_option_line("filament_tower_interface_pre_extrusion_dist", "material_multimaterial#multimaterial-wipe-tower-parameters");
         optgroup->append_single_option_line("filament_tower_interface_pre_extrusion_length", "material_multimaterial#multimaterial-wipe-tower-parameters");
         optgroup->append_single_option_line("filament_tower_ironing_area", "material_multimaterial#multimaterial-wipe-tower-parameters");
@@ -4700,9 +4700,9 @@ void TabFilament::build()
         });
 
         optgroup = page->new_optgroup(L("Tool change parameters with multi extruder MM printers"), "param_toolchange_multi_extruder");
-        optgroup->append_single_option_line("filament_multitool_ramming", "material_multimaterial#tool-change-parameters-with-multi-extruder");
-        optgroup->append_single_option_line("filament_multitool_ramming_volume", "material_multimaterial#multi-tool-ramming-volume");
-        optgroup->append_single_option_line("filament_multitool_ramming_flow", "material_multimaterial#multi-tool-ramming-flow");
+        optgroup->append_single_option_line("filament_multitool_ramming", "material_multimaterial#tool-change-parameters-with-multi-extruder", 0);
+        optgroup->append_single_option_line("filament_multitool_ramming_volume", "material_multimaterial#multi-tool-ramming-volume", 0);
+        optgroup->append_single_option_line("filament_multitool_ramming_flow", "material_multimaterial#multi-tool-ramming-flow", 0);
 
     page = add_options_page(L("Dependencies"), "advanced");
         optgroup = page->new_optgroup(L("Compatible printers"), "param_dependencies_printers");
@@ -4772,6 +4772,7 @@ void TabFilament::update_description_lines()
 
 void TabFilament::toggle_options()
 {
+    const int variant_index = m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0;
     if (!m_active_page)
         return;
     bool is_BBL_printer = false;
@@ -4813,7 +4814,7 @@ void TabFilament::toggle_options()
             }
         }
 
-        toggle_line("additional_cooling_fan_speed", printer_cfg.opt_bool("auxiliary_fan"));
+        toggle_line("additional_cooling_fan_speed", printer_cfg.opt_bool("auxiliary_fan"), 256 + variant_index);
 
         bool support_air_filtration = printer_cfg.opt_bool("support_air_filtration");
         for (auto el : {"activate_air_filtration", "during_print_exhaust_fan_speed", "complete_print_exhaust_fan_speed"})
@@ -4829,8 +4830,8 @@ void TabFilament::toggle_options()
     }
     if (m_active_page->title() == L("Filament"))
     {
-        bool pa = m_config->opt_bool("enable_pressure_advance", 0);
-        toggle_option("pressure_advance", pa);
+        bool pa = m_config->opt_bool("enable_pressure_advance", variant_index);
+        toggle_option("pressure_advance", pa, 256 + variant_index);
 
         //Orca: Enable the plates that should be visible when multi bed support is enabled or a BBL printer is selected; otherwise, enable only the plate visible for the selected bed type.
         DynamicConfig& proj_cfg               = m_preset_bundle->project_config;
@@ -4886,11 +4887,11 @@ void TabFilament::toggle_options()
         for (auto el : {"filament_minimal_purge_on_wipe_tower", "filament_loading_speed_start", "filament_loading_speed",
                         "filament_unloading_speed_start", "filament_unloading_speed", "filament_toolchange_delay", "filament_cooling_moves",
                         "filament_cooling_initial_speed", "filament_cooling_final_speed"})
-            toggle_option(el, !is_BBL_printer);
+            toggle_option(el, !is_BBL_printer, filament_options_with_variant.count(el) ? 256 + variant_index : -1);
 
-        bool multitool_ramming = m_config->opt_bool("filament_multitool_ramming", 0);
-        toggle_option("filament_multitool_ramming_volume", multitool_ramming);
-        toggle_option("filament_multitool_ramming_flow", multitool_ramming);
+        bool multitool_ramming = m_config->opt_bool("filament_multitool_ramming", variant_index);
+        toggle_option("filament_multitool_ramming_volume", multitool_ramming, 256 + variant_index);
+        toggle_option("filament_multitool_ramming_flow", multitool_ramming, 256 + variant_index);
 
         bool is_BBL_multi_extruder = is_BBL_printer && printer_cfg.option<ConfigOptionFloats>("nozzle_diameter")->size() > 1;
         const int selection = m_variant_combo ? m_variant_combo->GetSelection() : 0;
diff --git a/tests/libslic3r/test_config_variant_expansion.cpp b/tests/libslic3r/test_config_variant_expansion.cpp
index e603808b54..fc03afa2c1 100644
--- a/tests/libslic3r/test_config_variant_expansion.cpp
+++ b/tests/libslic3r/test_config_variant_expansion.cpp
@@ -1,6 +1,7 @@
 #include <catch2/catch_all.hpp>
 
 #include "libslic3r/PrintConfig.hpp"
+#include "libslic3r/Preset.hpp"
 
 using namespace Slic3r;
 
@@ -30,6 +31,95 @@ void add_print_variant_columns(DynamicPrintConfig &config)
 
 } // namespace
 
+TEST_CASE("Filament cooling and pressure settings follow the selected nozzle variant", "[Config][FilamentVariants]")
+{
+    struct Setting {
+        const char *key;
+        const char *standard;
+        const char *high_flow;
+    };
+    const Setting settings[] = {
+        {"enable_pressure_advance", "0", "1"},
+        {"pressure_advance", "0.04", "0.02"},
+        {"fan_min_speed", "15", "10"},
+        {"fan_max_speed", "15", "60"},
+        {"additional_cooling_fan_speed", "70", "0"},
+        {"filament_minimal_purge_on_wipe_tower", "0", "15"},
+        {"filament_multitool_ramming", "0", "1"},
+        {"filament_multitool_ramming_volume", "0", "5"},
+        {"filament_multitool_ramming_flow", "10", "30"},
+        {"nozzle_temperature_range_low", "190", "210"},
+        {"nozzle_temperature_range_high", "255", "280"},
+    };
+    const int variant_index = GENERATE(0, 1, 2, 3);
+    const int value_count = GENERATE(1, 2, 4);
+    const bool load_preset = GENERATE(false, true);
+    const bool high_flow = variant_index % 2 != 0;
+    for (const Setting &setting : settings) {
+        DYNAMIC_SECTION(setting.key << " variant=" << variant_index << " values=" << value_count << " loaded=" << load_preset) {
+            DynamicPrintConfig printer = make_hybrid_printer_config();
+            if (variant_index >= 2)
+                printer.option<ConfigOptionEnumsGeneric>("extruder_type")->values[1] = etBowden;
+            DynamicPrintConfig filament;
+            filament.option<ConfigOptionStrings>("filament_extruder_variant", true)->values =
+                {"Direct Drive Standard", "Direct Drive High Flow", "Bowden Standard", "Bowden High Flow"};
+            std::string values = setting.standard;
+            for (int i = 1; i < value_count; ++i)
+                values += std::string(",") + (i % 2 ? setting.high_flow : setting.standard);
+            REQUIRE(filament.option(setting.key, true)->deserialize(values));
+
+            if (load_preset) {
+                extend_default_config_length(filament, false, DynamicPrintConfig::full_print_config());
+                DynamicPrintConfig expanded;
+                std::string expanded_values = values;
+                for (int i = value_count; i < 4; ++i)
+                    expanded_values += std::string(",") + setting.standard;
+                REQUIRE(expanded.option(setting.key, true)->deserialize(expanded_values));
+                REQUIRE(*filament.option(setting.key) == *expanded.option(setting.key));
+            }
+
+            std::vector<std::vector<NozzleVolumeType>> nozzle_types;
+            const int count = printer.get_extruder_nozzle_volume_count(2, nozzle_types);
+            filament.update_values_to_printer_extruders(printer, 2, count, nozzle_types,
+                filament_options_with_variant, "", "filament_extruder_variant", 1, 2,
+                high_flow ? nvtHighFlow : nvtStandard);
+
+            DynamicPrintConfig expected;
+            REQUIRE(expected.option(setting.key, true)->deserialize(high_flow && variant_index < value_count ? setting.high_flow : setting.standard));
+            REQUIRE(*filament.option(setting.key) == *expected.option(setting.key));
+        }
+    }
+}
+
+TEST_CASE("Filaments on the same hybrid tool keep their own cooling and pressure variants", "[Config][FilamentVariants]")
+{
+    DynamicPrintConfig config = make_hybrid_printer_config();
+    config.option<ConfigOptionInts>("filament_self_index", true)->values = {1, 1, 2, 2};
+    config.option<ConfigOptionStrings>("filament_extruder_variant", true)->values =
+        {"Direct Drive Standard", "Direct Drive High Flow", "Direct Drive Standard", "Direct Drive High Flow"};
+    config.option<ConfigOptionInts>("filament_map", true)->values = {2, 2};
+    config.option<ConfigOptionInts>("filament_volume_map", true)->values = {nvtHighFlow, nvtStandard};
+    config.option<ConfigOptionFloats>("fan_max_speed", true)->values = {15., 60., 20., 80.};
+    config.option<ConfigOptionFloats>("pressure_advance", true)->values = {0.04, 0.02, 0.05, 0.03};
+    config.option<ConfigOptionBools>("filament_multitool_ramming", true)->values = {false, true, false, true};
+    std::vector<std::vector<NozzleVolumeType>> nozzle_types;
+    const int count = config.get_extruder_nozzle_volume_count(2, nozzle_types);
+    std::set<std::string> keys = filament_options_with_variant;
+    keys.insert("filament_self_index");
+    config.update_values_to_printer_extruders_for_multiple_filaments(config, 2, count, keys,
+        "filament_self_index", "filament_extruder_variant");
+    const auto &fan = config.option<ConfigOptionFloats>("fan_max_speed")->values;
+    REQUIRE(fan.size() == 2);
+    REQUIRE_THAT(fan[0], Catch::Matchers::WithinAbs(60., 1e-9));
+    REQUIRE_THAT(fan[1], Catch::Matchers::WithinAbs(20., 1e-9));
+    const auto &pa = config.option<ConfigOptionFloats>("pressure_advance")->values;
+    REQUIRE(pa.size() == 2);
+    REQUIRE_THAT(pa[0], Catch::Matchers::WithinAbs(0.02, 1e-9));
+    REQUIRE_THAT(pa[1], Catch::Matchers::WithinAbs(0.05, 1e-9));
+    REQUIRE(config.option<ConfigOptionBools>("filament_multitool_ramming")->get_at(0));
+    REQUIRE_FALSE(config.option<ConfigOptionBools>("filament_multitool_ramming")->get_at(1));
+}
+
 TEST_CASE("apply_override fills nil entries from the 0-based default index", "[Config]")
 {
     ConfigOptionFloats machine({10., 20., 30.});

From d58c3b0d895df36fcce06d6a48d8c622a8d9daee Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Tue, 29 Sep 2026 22:42:50 -0400
Subject: [PATCH 12/13] Keep downstream customization limited to printer
 profiles

Extract non-profile changes into a separate development line while preserving all profile content.

Co-authored-by: Codex <codex@openai.com>
---
 scripts/orca_profile_tool.py                  | 16 ++--
 scripts/tests/test_profile_tool.py            | 26 +++---
 .../OrcaSlicer_profile_validator.cpp          |  7 --
 src/libslic3r/PrintConfig.cpp                 | 13 ---
 src/slic3r/GUI/ConfigManipulation.cpp         | 24 ++---
 src/slic3r/GUI/ConfigManipulation.hpp         |  8 +-
 src/slic3r/GUI/GUI_App.cpp                    |  5 --
 src/slic3r/GUI/Plater.cpp                     | 15 +---
 src/slic3r/GUI/Tab.cpp                        | 48 +++++-----
 .../test_config_variant_expansion.cpp         | 90 -------------------
 10 files changed, 64 insertions(+), 188 deletions(-)

diff --git a/scripts/orca_profile_tool.py b/scripts/orca_profile_tool.py
index 6728c47127..f7f622c8c0 100755
--- a/scripts/orca_profile_tool.py
+++ b/scripts/orca_profile_tool.py
@@ -1757,20 +1757,18 @@ def check_variant_names(profiles_dir, vendor):
 
 
 def check_variant_arrays(profiles_dir, vendor, strict=False):
-    """Variant arrays have the declared width or a shared single value,
-    and a printer's variant layout keys agree.
+    """Every variant array an instantiated preset writes is exactly its
+    variant length x stride wide, and a printer's variant layout keys agree.
 
     Only instantiated presets are judged, each at the variant length of its composed
     config (_variant_length's); a base is not, since what it writes counts only where
     it reaches a preset that does not override it. A full-width array holds one
-    value per variant; a single value at stride 1 broadcasts to every variant.
-    Short, nonempty filament arrays use element zero for missing variants,
-    matching the C++ loader. Other widths are errors. A key the preset does not write
-    takes what reaches it - the default,
+    value per variant; any other width is an error, one value included and whatever
+    the values. A key the preset does not write takes what reaches it - the default,
     or an array it inherits or includes - which the loader sizes to the preset, and
     is not checked. With strict, every instantiated preset also holds each key that
-    reaches it at its own width or as a shared single value, so a preset with
-    other variants restates non-shared arrays when necessary. The machine_max_* limits hold
+    reaches it at its own width, so a preset with other variants than the file its
+    array comes from restates the array. The machine_max_* limits hold
     a (normal, silent) pair per variant. A process that lists variants pairs each
     with its extruder id (extruder 1 everywhere when absent); a machine's layout keys
     are held to _check_printer_layout, which reports a printer_extruder_id that does
@@ -1792,7 +1790,7 @@ def check_variant_arrays(profiles_dir, vendor, strict=False):
                 continue
             value, path = config[key]
             width, need = len(_as_list(value)), variant_length * stride
-            if width == need or (stride == 1 and (width == 1 or (ptype == "filament" and 0 < width < need))):
+            if width == need:
                 continue
             print_error(f'{rel}: "{key}" has {width} values for variant length {variant_length}'
                         f"{' (' + reason + ')' if reason else ''} at stride {stride}, "
diff --git a/scripts/tests/test_profile_tool.py b/scripts/tests/test_profile_tool.py
index bef4651f97..a4e9a6f81b 100644
--- a/scripts/tests/test_profile_tool.py
+++ b/scripts/tests/test_profile_tool.py
@@ -968,25 +968,21 @@ class TestFixVariant(TreeCase):
                     retraction_length=["0.8", "1.2"], z_hop=["0.4"],
                     machine_max_speed_x=["500", "200"])
         errors, out = self.width_errors()
-        self.assertEqual(errors, 1, out)
-        self.assertNotIn('"z_hop"', out)
+        self.assertEqual(errors, 2, out)
+        self.assertIn('M.json: "z_hop" has 1 values for variant length 2 (no '
+                      'printer_extruder_variant, so one default variant per extruder) at stride 1, '
+                      'which takes 2', out)
         self.assertIn('M.json: "machine_max_speed_x" has 2 values for variant length 2', out)
         self.assertNotIn("retraction_length", out)
 
-    def test_one_value_applies_to_every_variant(self):
+    def test_one_value_is_an_error_where_the_list_has_more_variants(self):
         self.preset("process/P.json", instantiation="true", outer_wall_speed=["30"],
                     print_extruder_id=["1", "1"],
                     print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow"])
         errors, out = self.width_errors()
-        self.assertEqual(errors, 0, out)
-        self.assertEqual(self.width_errors("strict")[0], 0)
-
-    def test_a_short_filament_array_uses_element_zero_for_missing_variants(self):
-        self.preset("filament/F.json", instantiation="true", pressure_advance=["0.02", "0.04"],
-                    filament_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow", "Bowden Standard"])
-        errors, out = self.width_errors()
-        self.assertEqual(errors, 0, out)
-        self.assertEqual(self.width_errors("strict")[0], 0)
+        self.assertEqual(errors, 1, out)
+        self.assertIn('P.json: "outer_wall_speed" has 1 values for variant length 2 at stride 1, '
+                      'which takes 2', out)
 
     def test_one_value_is_padded_to_every_variant(self):
         self.preset("machine/M.json", instantiation="true", nozzle_diameter=["0.4"] * 3,
@@ -1029,11 +1025,13 @@ class TestFixVariant(TreeCase):
         self.assertNotIn("outer_wall_speed", self.t.read("V", "process/S1.json"))
         self.assertEqual(self.width_errors("strict")[0], 0)
 
-    def test_an_inherited_single_value_is_valid_and_can_be_explicitly_expanded(self):
+    def test_an_inherited_array_is_checked_and_restated_only_when_strict(self):
         self.processes(["30"])
         self.assertEqual(self.width_errors()[0], 0)
         errors, out = self.width_errors("strict")
-        self.assertEqual(errors, 0, out)
+        self.assertEqual(errors, 1, out)
+        self.assertIn('process/D1.json: "outer_wall_speed" has 1 values for variant length 2 at '
+                      'stride 1, which takes 2 (it comes from V/process/common.json)', out)
         before = self.t.bytes_map()
         self.run_command("fix-variant")
         self.assertEqual(self.t.bytes_map(), before)
diff --git a/src/dev-utils/OrcaSlicer_profile_validator.cpp b/src/dev-utils/OrcaSlicer_profile_validator.cpp
index e41ce737ca..4bb7eab64d 100644
--- a/src/dev-utils/OrcaSlicer_profile_validator.cpp
+++ b/src/dev-utils/OrcaSlicer_profile_validator.cpp
@@ -314,13 +314,6 @@ DynamicPrintConfig slice_config(PresetBundle &bundle)
             fmap[i] = int(i % nozzles) + 1;
     }
 
-    // A fresh printer selection uses its declared nozzle volumes, just like the
-    // app. Otherwise a high-flow preset is silently sliced with Standard tuning.
-    bundle.reset_default_nozzle_volume_type();
-    auto &filament_map = bundle.project_config.option<ConfigOptionInts>("filament_map", true)->values;
-    bundle.project_config.option<ConfigOptionInts>("filament_volume_map", true)->values =
-        bundle.get_default_nozzle_volume_types_for_filaments(filament_map);
-
     DynamicPrintConfig cfg = bundle.full_config();
     cfg.set_key_value("enable_prime_tower", new ConfigOptionBool(true)); // force a purge tower so the change is detectable
     // The map above drives full_config()'s per-filament variant collapse; fmmManual on the sliced config
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 5412558841..16a913a85f 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -9463,19 +9463,6 @@ std::set<std::string> print_options_with_variant = {
 std::set<std::string> filament_options_with_variant = {
     "filament_flow_ratio",
     "filament_max_volumetric_speed",
-    // Variant arrays use element zero when the selected column is absent.
-    // A singleton therefore retains the same tuning for every nozzle variant.
-    "enable_pressure_advance",
-    "pressure_advance",
-    "fan_min_speed",
-    "fan_max_speed",
-    "additional_cooling_fan_speed",
-    "filament_minimal_purge_on_wipe_tower",
-    "filament_multitool_ramming",
-    "filament_multitool_ramming_volume",
-    "filament_multitool_ramming_flow",
-    "nozzle_temperature_range_low",
-    "nozzle_temperature_range_high",
     // Per-variant ramming / pre-cooling / nozzle-change filament overrides
     "filament_ramming_volumetric_speed",
     "filament_pre_cooling_temperature",
diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp
index fa8e2e5f16..cc687ff84a 100644
--- a/src/slic3r/GUI/ConfigManipulation.cpp
+++ b/src/slic3r/GUI/ConfigManipulation.cpp
@@ -78,12 +78,12 @@ void ConfigManipulation::set_option_label(const std::string& opt_key, const wxSt
         cb_set_option_label(opt_key, label, opt_index);
 }
 
-void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrintConfig *config, unsigned int variant_index) {
+void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrintConfig *config) {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
 
     // Get the selected filament type
     std::string filament_type = "";
@@ -123,16 +123,16 @@ void ConfigManipulation::check_nozzle_recommended_temperature_range(DynamicPrint
     }
 }
 
-void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *config, unsigned int variant_index)
+void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *config)
 {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
 
     if (config->has("nozzle_temperature")) {
-        if (config->opt_int("nozzle_temperature", variant_index) < temperature_range_low || config->opt_int("nozzle_temperature", variant_index) > temperature_range_high) {
+        if (config->opt_int("nozzle_temperature", 0) < temperature_range_low || config->opt_int("nozzle_temperature", 0) > temperature_range_high) {
             wxString msg_text = _(L("The nozzle may become clogged when the temperature is out of the recommended range.\nPlease make sure whether to use this temperature to print.\n\n"));
             msg_text += wxString::Format(_L("The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius."), temperature_range_low, temperature_range_high);
             MessageDialog dialog(m_msg_dlg_parent, msg_text, "", wxICON_WARNING | wxOK);
@@ -143,17 +143,17 @@ void ConfigManipulation::check_nozzle_temperature_range(DynamicPrintConfig *conf
     }
 }
 
-void ConfigManipulation::check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config, unsigned int variant_index)
+void ConfigManipulation::check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config)
 {
     if (is_msg_dlg_already_exist)
         return;
 
     int temperature_range_low, temperature_range_high;
-    if (!get_temperature_range(config, temperature_range_low, temperature_range_high, variant_index)) return;
+    if (!get_temperature_range(config, temperature_range_low, temperature_range_high)) return;
 
     if (config->has("nozzle_temperature_initial_layer")) {
-        if (config->opt_int("nozzle_temperature_initial_layer", variant_index) < temperature_range_low ||
-            config->opt_int("nozzle_temperature_initial_layer", variant_index) > temperature_range_high)
+        if (config->opt_int("nozzle_temperature_initial_layer", 0) < temperature_range_low ||
+            config->opt_int("nozzle_temperature_initial_layer", 0) > temperature_range_high)
         {
             wxString msg_text = _(L("The nozzle may become clogged when the temperature is out of the recommended range.\nPlease make sure whether to use this temperature to print.\n\n"));
             msg_text += wxString::Format(_L("The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius."), temperature_range_low, temperature_range_high);
@@ -1295,15 +1295,15 @@ int ConfigManipulation::show_spiral_mode_settings_dialog(bool is_object_config)
     return answer;
 }
 
-bool ConfigManipulation::get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high, unsigned int variant_index)
+bool ConfigManipulation::get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high)
 {
     bool range_low_exist = false, range_high_exist = false;
     if (config->has("nozzle_temperature_range_low")) {
-        range_low       = config->opt_int("nozzle_temperature_range_low", variant_index);
+        range_low       = config->opt_int("nozzle_temperature_range_low", (unsigned int) 0);
         range_low_exist       = true;
     }
     if (config->has("nozzle_temperature_range_high")) {
-        range_high       = config->opt_int("nozzle_temperature_range_high", variant_index);
+        range_high       = config->opt_int("nozzle_temperature_range_high", (unsigned int) 0);
         range_high_exist       = true;
     }
     return range_low_exist && range_high_exist;
diff --git a/src/slic3r/GUI/ConfigManipulation.hpp b/src/slic3r/GUI/ConfigManipulation.hpp
index bff41effad..ac53ffb4bb 100644
--- a/src/slic3r/GUI/ConfigManipulation.hpp
+++ b/src/slic3r/GUI/ConfigManipulation.hpp
@@ -79,9 +79,9 @@ public:
     void    apply_null_fff_config(DynamicPrintConfig *config, std::vector<std::string> const &keys, std::map<ObjectBase*, ModelConfig*> const & configs);
 
     //BBS: FFF filament nozzle temperature range
-    void    check_nozzle_recommended_temperature_range(DynamicPrintConfig *config, unsigned int variant_index = 0);
-    void    check_nozzle_temperature_range(DynamicPrintConfig* config, unsigned int variant_index = 0);
-    void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config, unsigned int variant_index = 0);
+    void    check_nozzle_recommended_temperature_range(DynamicPrintConfig *config);
+    void    check_nozzle_temperature_range(DynamicPrintConfig* config);
+    void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
     void    check_adaptive_pressure_advance_model(DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
     void    check_chamber_temperature(DynamicPrintConfig* config);
@@ -104,7 +104,7 @@ public:
     int    show_spiral_mode_settings_dialog(bool is_object_config = false);
 
 private:
-    bool get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high, unsigned int variant_index);
+    bool get_temperature_range(DynamicPrintConfig *config, int &range_low, int &range_high);
 };
 
 } // GUI
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index 5feebdb777..72849dd78e 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -8895,11 +8895,6 @@ void GUI_App::load_current_presets(bool active_preset_combox/*= false*/, bool ch
 			if (active_preset_combox)
 				tab->reactive_preset_combo_box();
 		}
-    // Preset loading can resize the filament list without an extruder-count change event.
-    // Refresh the controls even when the list already matches the printer's nozzle count.
-    if (printer_technology == ptFFF)
-        this->plater()->on_filament_count_change(preset_bundle->filament_presets.size());
-
     // BBS: model config
     for (Tab *tab : model_tabs_list)
 		if (tab->supports_printer_technology(printer_technology)) {
diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp
index 22bfe789d1..51fdba9bf8 100644
--- a/src/slic3r/GUI/Plater.cpp
+++ b/src/slic3r/GUI/Plater.cpp
@@ -1803,10 +1803,8 @@ bool Sidebar::priv::switch_diameter_to(const wxString &diameter)
     auto* nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(printer_preset.config.option("nozzle_diameter"));
     if (nozzle_diameter && nozzle_diameter->size() > 0) {
         auto current_nozzle_dia = get_diameter_string(nozzle_diameter->values[0]);
-        // A named variant can share this diameter; selecting the plain diameter
-        // must still switch back to the standard profile.
-        if (current_nozzle_dia == diameter.ToStdString() &&
-            printer_preset.config.opt_string("printer_variant") == diameter.ToStdString()) {
+        // If the selected diameter is the same as current nozzle, don't switch profiles
+        if (current_nozzle_dia == diameter.ToStdString()) {
             return true;
         }
     }
@@ -3928,18 +3926,13 @@ void Sidebar::update_presets(Preset::Type preset_type)
             combo_flow->Show(combo_flow->GetCount() > 0);
         };
 
-        auto update_extruder_diameter = [&diameters, &nozzle_diameter, &diameter](int extruder_index,ExtruderGroup & extruder) {
+        auto update_extruder_diameter = [&diameters, &nozzle_diameter](int extruder_index,ExtruderGroup & extruder) {
             extruder.combo_diameter->Clear();
             if (extruder_index >= int(nozzle_diameter->values.size()))
                 return;
             int select = -1;
             // ORCA get the actual nozzle diameter from printer config
             auto nozzle_dia = get_diameter_string(nozzle_diameter->values[extruder_index]);
-            // Named variants such as "0.4HS" and "0.4 High Flow" share a physical diameter.
-            // Retain the variant selection unless the diameter was customized.
-            const auto selected_variant =
-                diameter.substr(0, diameter.find_first_not_of("0123456789.")) == nozzle_dia &&
-                std::find(diameters.begin(), diameters.end(), diameter) != diameters.end() ? diameter : nozzle_dia;
             // ORCA try to add nozzle diameter from config if list is empty. fixes blank nozzle combo box when preset has no alias
             if(!diameters.empty() && diameters[0].empty() && !nozzle_dia.empty()){
                 diameters[0] = nozzle_dia;
@@ -3949,7 +3942,7 @@ void Sidebar::update_presets(Preset::Type preset_type)
                 diameters.push_back(nozzle_dia);
             }
             for (size_t i = 0; i < diameters.size(); ++i) {
-                if (diameters[i] == selected_variant)
+                if (diameters[i] == nozzle_dia)
                     select = extruder.combo_diameter->GetCount();
                 extruder.combo_diameter->Append(diameters[i], {});
             }
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 4698a70561..c824c16d5d 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -4396,16 +4396,16 @@ void TabFilament::build()
         optgroup->append_single_option_line("temperature_vitrification", "material_basic_information#softening-temperature");
         optgroup->append_single_option_line("idle_temperature", "material_basic_information#idle-temperature");
         Line line = { L("Recommended nozzle temperature"), L("Recommended nozzle temperature range of this filament. 0 means not set") };
-        line.append_option(optgroup->get_option("nozzle_temperature_range_low", 0));
-        line.append_option(optgroup->get_option("nozzle_temperature_range_high", 0));
+        line.append_option(optgroup->get_option("nozzle_temperature_range_low"));
+        line.append_option(optgroup->get_option("nozzle_temperature_range_high"));
         optgroup->append_line(line);
 
         optgroup->m_on_change = [this, optgroup](t_config_option_key opt_key, boost::any value) {
             DynamicPrintConfig &filament_config = m_preset_bundle->filaments.get_edited_preset().config;
 
             update_dirty();
-            if (!m_postpone_update_ui && (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_range_low" || opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_range_high")) {
-                m_config_manipulation.check_nozzle_recommended_temperature_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
+            if (!m_postpone_update_ui && (opt_key == "nozzle_temperature_range_low" || opt_key == "nozzle_temperature_range_high")) {
+                m_config_manipulation.check_nozzle_recommended_temperature_range(&filament_config);
             }
             on_value_change(opt_key, value);
         };
@@ -4532,11 +4532,11 @@ void TabFilament::build()
             else if (opt_key == "textured_plate_temp" || opt_key == "textured_plate_temp_initial_layer") {
                 m_config_manipulation.check_bed_temperature_difference(BedType::btPTE, &filament_config);
             }
-            else */if (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature") {
-                m_config_manipulation.check_nozzle_temperature_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
+            else */if (opt_key == "nozzle_temperature") {
+                m_config_manipulation.check_nozzle_temperature_range(&filament_config);
             }
-            else if (opt_key.substr(0, opt_key.find('#')) == "nozzle_temperature_initial_layer") {
-                m_config_manipulation.check_nozzle_temperature_initial_layer_range(&filament_config, m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0);
+            else if (opt_key == "nozzle_temperature_initial_layer") {
+                m_config_manipulation.check_nozzle_temperature_initial_layer_range(&filament_config);
             }
 
             on_value_change(opt_key, value);
@@ -4571,12 +4571,12 @@ void TabFilament::build()
         optgroup = page->new_optgroup(L("Part cooling fan"), L"param_cooling_part_fan");
         line = { L("Min fan speed threshold"), L("The part cooling fan will run at the minimum fan speed when the estimated layer time is longer than the threshold value. When the layer time is shorter than the threshold, the fan speed will be interpolated between the minimum and maximum fan speed according to layer printing time.") };
         line.label_path = "material_cooling#material-part-cooling-fan";
-        line.append_option(optgroup->get_option("fan_min_speed", 0));
+        line.append_option(optgroup->get_option("fan_min_speed"));
         line.append_option(optgroup->get_option("fan_cooling_layer_time"));
         optgroup->append_line(line);
         line = { L("Max fan speed threshold"), L("The part cooling fan will run at maximum speed when the estimated layer time is shorter than the threshold value.") };
         line.label_path = "material_cooling#material-part-cooling-fan";
-        line.append_option(optgroup->get_option("fan_max_speed", 0));
+        line.append_option(optgroup->get_option("fan_max_speed"));
         line.append_option(optgroup->get_option("slow_down_layer_time"));
         optgroup->append_line(line);
         optgroup->append_single_option_line("reduce_fan_stop_start_freq", "material_cooling#keep-fan-always-on");
@@ -4592,7 +4592,7 @@ void TabFilament::build()
         optgroup->append_single_option_line("ironing_fan_speed", "material_cooling#ironing-fan-speed"); // ORCA: Add support for ironing fan speed control
 
         optgroup = page->new_optgroup(L("Auxiliary part cooling fan"), L"param_cooling_aux_fan");
-        optgroup->append_single_option_line("additional_cooling_fan_speed", "material_cooling#auxiliary-part-cooling-fan", 0);
+        optgroup->append_single_option_line("additional_cooling_fan_speed", "material_cooling#auxiliary-part-cooling-fan");
 
         optgroup = page->new_optgroup(L("Exhaust fan"),L"param_cooling_exhaust");
 
@@ -4656,7 +4656,7 @@ void TabFilament::build()
 
     page = add_options_page(L("Multimaterial"), "custom-gcode_multi_material"); // ORCA: icon only visible on placeholders
         optgroup = page->new_optgroup(L("Wipe tower parameters"), "param_tower");
-        optgroup->append_single_option_line("filament_minimal_purge_on_wipe_tower", "material_multimaterial#multimaterial-wipe-tower-parameters", 0);
+        optgroup->append_single_option_line("filament_minimal_purge_on_wipe_tower", "material_multimaterial#multimaterial-wipe-tower-parameters");
         optgroup->append_single_option_line("filament_tower_interface_pre_extrusion_dist", "material_multimaterial#multimaterial-wipe-tower-parameters");
         optgroup->append_single_option_line("filament_tower_interface_pre_extrusion_length", "material_multimaterial#multimaterial-wipe-tower-parameters");
         optgroup->append_single_option_line("filament_tower_ironing_area", "material_multimaterial#multimaterial-wipe-tower-parameters");
@@ -4700,9 +4700,9 @@ void TabFilament::build()
         });
 
         optgroup = page->new_optgroup(L("Tool change parameters with multi extruder MM printers"), "param_toolchange_multi_extruder");
-        optgroup->append_single_option_line("filament_multitool_ramming", "material_multimaterial#tool-change-parameters-with-multi-extruder", 0);
-        optgroup->append_single_option_line("filament_multitool_ramming_volume", "material_multimaterial#multi-tool-ramming-volume", 0);
-        optgroup->append_single_option_line("filament_multitool_ramming_flow", "material_multimaterial#multi-tool-ramming-flow", 0);
+        optgroup->append_single_option_line("filament_multitool_ramming", "material_multimaterial#tool-change-parameters-with-multi-extruder");
+        optgroup->append_single_option_line("filament_multitool_ramming_volume", "material_multimaterial#multi-tool-ramming-volume");
+        optgroup->append_single_option_line("filament_multitool_ramming_flow", "material_multimaterial#multi-tool-ramming-flow");
 
     page = add_options_page(L("Dependencies"), "advanced");
         optgroup = page->new_optgroup(L("Compatible printers"), "param_dependencies_printers");
@@ -4772,7 +4772,6 @@ void TabFilament::update_description_lines()
 
 void TabFilament::toggle_options()
 {
-    const int variant_index = m_variant_combo ? std::max(0, m_variant_combo->GetSelection()) : 0;
     if (!m_active_page)
         return;
     bool is_BBL_printer = false;
@@ -4814,7 +4813,7 @@ void TabFilament::toggle_options()
             }
         }
 
-        toggle_line("additional_cooling_fan_speed", printer_cfg.opt_bool("auxiliary_fan"), 256 + variant_index);
+        toggle_line("additional_cooling_fan_speed", printer_cfg.opt_bool("auxiliary_fan"));
 
         bool support_air_filtration = printer_cfg.opt_bool("support_air_filtration");
         for (auto el : {"activate_air_filtration", "during_print_exhaust_fan_speed", "complete_print_exhaust_fan_speed"})
@@ -4830,8 +4829,11 @@ void TabFilament::toggle_options()
     }
     if (m_active_page->title() == L("Filament"))
     {
-        bool pa = m_config->opt_bool("enable_pressure_advance", variant_index);
-        toggle_option("pressure_advance", pa, 256 + variant_index);
+        const int selection = m_variant_combo ? m_variant_combo->GetSelection() : 0;
+        const unsigned int variant_idx = (unsigned int) std::max(selection, 0);
+
+        bool pa = m_config->opt_bool("enable_pressure_advance", variant_idx);
+        toggle_option("pressure_advance", pa, 0);
 
         //Orca: Enable the plates that should be visible when multi bed support is enabled or a BBL printer is selected; otherwise, enable only the plate visible for the selected bed type.
         DynamicConfig& proj_cfg               = m_preset_bundle->project_config;
@@ -4885,11 +4887,11 @@ void TabFilament::toggle_options()
         for (auto el : {"filament_minimal_purge_on_wipe_tower", "filament_loading_speed_start", "filament_loading_speed",
                         "filament_unloading_speed_start", "filament_unloading_speed", "filament_toolchange_delay", "filament_cooling_moves",
                         "filament_cooling_initial_speed", "filament_cooling_final_speed"})
-            toggle_option(el, !is_BBL_printer, filament_options_with_variant.count(el) ? 256 + variant_index : -1);
+            toggle_option(el, !is_BBL_printer);
 
-        bool multitool_ramming = m_config->opt_bool("filament_multitool_ramming", variant_index);
-        toggle_option("filament_multitool_ramming_volume", multitool_ramming, 256 + variant_index);
-        toggle_option("filament_multitool_ramming_flow", multitool_ramming, 256 + variant_index);
+        bool multitool_ramming = m_config->opt_bool("filament_multitool_ramming", 0);
+        toggle_option("filament_multitool_ramming_volume", multitool_ramming);
+        toggle_option("filament_multitool_ramming_flow", multitool_ramming);
 
         bool is_BBL_multi_extruder = is_BBL_printer && printer_cfg.option<ConfigOptionFloats>("nozzle_diameter")->size() > 1;
         const int selection = m_variant_combo ? m_variant_combo->GetSelection() : 0;
diff --git a/tests/libslic3r/test_config_variant_expansion.cpp b/tests/libslic3r/test_config_variant_expansion.cpp
index 67a16d2f47..de19e8219c 100644
--- a/tests/libslic3r/test_config_variant_expansion.cpp
+++ b/tests/libslic3r/test_config_variant_expansion.cpp
@@ -1,7 +1,6 @@
 #include <catch2/catch_all.hpp>
 
 #include "libslic3r/PrintConfig.hpp"
-#include "libslic3r/Preset.hpp"
 
 using namespace Slic3r;
 
@@ -31,95 +30,6 @@ void add_print_variant_columns(DynamicPrintConfig &config)
 
 } // namespace
 
-TEST_CASE("Filament cooling and pressure settings follow the selected nozzle variant", "[Config][FilamentVariants]")
-{
-    struct Setting {
-        const char *key;
-        const char *standard;
-        const char *high_flow;
-    };
-    const Setting settings[] = {
-        {"enable_pressure_advance", "0", "1"},
-        {"pressure_advance", "0.04", "0.02"},
-        {"fan_min_speed", "15", "10"},
-        {"fan_max_speed", "15", "60"},
-        {"additional_cooling_fan_speed", "70", "0"},
-        {"filament_minimal_purge_on_wipe_tower", "0", "15"},
-        {"filament_multitool_ramming", "0", "1"},
-        {"filament_multitool_ramming_volume", "0", "5"},
-        {"filament_multitool_ramming_flow", "10", "30"},
-        {"nozzle_temperature_range_low", "190", "210"},
-        {"nozzle_temperature_range_high", "255", "280"},
-    };
-    const int variant_index = GENERATE(0, 1, 2, 3);
-    const int value_count = GENERATE(1, 2, 4);
-    const bool load_preset = GENERATE(false, true);
-    const bool high_flow = variant_index % 2 != 0;
-    for (const Setting &setting : settings) {
-        DYNAMIC_SECTION(setting.key << " variant=" << variant_index << " values=" << value_count << " loaded=" << load_preset) {
-            DynamicPrintConfig printer = make_hybrid_printer_config();
-            if (variant_index >= 2)
-                printer.option<ConfigOptionEnumsGeneric>("extruder_type")->values[1] = etBowden;
-            DynamicPrintConfig filament;
-            filament.option<ConfigOptionStrings>("filament_extruder_variant", true)->values =
-                {"Direct Drive Standard", "Direct Drive High Flow", "Bowden Standard", "Bowden High Flow"};
-            std::string values = setting.standard;
-            for (int i = 1; i < value_count; ++i)
-                values += std::string(",") + (i % 2 ? setting.high_flow : setting.standard);
-            REQUIRE(filament.option(setting.key, true)->deserialize(values));
-
-            if (load_preset) {
-                extend_default_config_length(filament, false, DynamicPrintConfig::full_print_config());
-                DynamicPrintConfig expanded;
-                std::string expanded_values = values;
-                for (int i = value_count; i < 4; ++i)
-                    expanded_values += std::string(",") + setting.standard;
-                REQUIRE(expanded.option(setting.key, true)->deserialize(expanded_values));
-                REQUIRE(*filament.option(setting.key) == *expanded.option(setting.key));
-            }
-
-            std::vector<std::vector<NozzleVolumeType>> nozzle_types;
-            const int count = printer.get_extruder_nozzle_volume_count(2, nozzle_types);
-            filament.update_values_to_printer_extruders(printer, 2, count, nozzle_types,
-                filament_options_with_variant, "", "filament_extruder_variant", 1, 2,
-                high_flow ? nvtHighFlow : nvtStandard);
-
-            DynamicPrintConfig expected;
-            REQUIRE(expected.option(setting.key, true)->deserialize(high_flow && variant_index < value_count ? setting.high_flow : setting.standard));
-            REQUIRE(*filament.option(setting.key) == *expected.option(setting.key));
-        }
-    }
-}
-
-TEST_CASE("Filaments on the same hybrid tool keep their own cooling and pressure variants", "[Config][FilamentVariants]")
-{
-    DynamicPrintConfig config = make_hybrid_printer_config();
-    config.option<ConfigOptionInts>("filament_self_index", true)->values = {1, 1, 2, 2};
-    config.option<ConfigOptionStrings>("filament_extruder_variant", true)->values =
-        {"Direct Drive Standard", "Direct Drive High Flow", "Direct Drive Standard", "Direct Drive High Flow"};
-    config.option<ConfigOptionInts>("filament_map", true)->values = {2, 2};
-    config.option<ConfigOptionInts>("filament_volume_map", true)->values = {nvtHighFlow, nvtStandard};
-    config.option<ConfigOptionFloats>("fan_max_speed", true)->values = {15., 60., 20., 80.};
-    config.option<ConfigOptionFloats>("pressure_advance", true)->values = {0.04, 0.02, 0.05, 0.03};
-    config.option<ConfigOptionBools>("filament_multitool_ramming", true)->values = {false, true, false, true};
-    std::vector<std::vector<NozzleVolumeType>> nozzle_types;
-    const int count = config.get_extruder_nozzle_volume_count(2, nozzle_types);
-    std::set<std::string> keys = filament_options_with_variant;
-    keys.insert("filament_self_index");
-    config.update_values_to_printer_extruders_for_multiple_filaments(config, 2, count, keys,
-        "filament_self_index", "filament_extruder_variant");
-    const auto &fan = config.option<ConfigOptionFloats>("fan_max_speed")->values;
-    REQUIRE(fan.size() == 2);
-    REQUIRE_THAT(fan[0], Catch::Matchers::WithinAbs(60., 1e-9));
-    REQUIRE_THAT(fan[1], Catch::Matchers::WithinAbs(20., 1e-9));
-    const auto &pa = config.option<ConfigOptionFloats>("pressure_advance")->values;
-    REQUIRE(pa.size() == 2);
-    REQUIRE_THAT(pa[0], Catch::Matchers::WithinAbs(0.02, 1e-9));
-    REQUIRE_THAT(pa[1], Catch::Matchers::WithinAbs(0.05, 1e-9));
-    REQUIRE(config.option<ConfigOptionBools>("filament_multitool_ramming")->get_at(0));
-    REQUIRE_FALSE(config.option<ConfigOptionBools>("filament_multitool_ramming")->get_at(1));
-}
-
 TEST_CASE("apply_override fills nil entries from the 0-based default index", "[Config]")
 {
     ConfigOptionFloats machine({10., 20., 30.});

From 09184ac5a46deb37f446f352985415a3e6c81e1b Mon Sep 17 00:00:00 2001
From: Eric McCann <nuclearmistake@gmail.com>
Date: Wed, 30 Sep 2026 07:41:17 -0400
Subject: [PATCH 13/13] Fix U1 profile variant array validation

Expand shared filament and process values to their declared variant widths while preserving existing tuning. Bump the Snapmaker bundle version to 02.04.00.22.

Validation: Snapmaker profile check passed with zero errors and warnings; verified all expanded entries repeat their original values.

Co-authored-by: Codex <codex@openai.com>
---
 resources/profiles/Snapmaker.json             |   2 +-
 .../filament/Generic PLA @U1 0.4 nozzle.json  |   1 +
 .../filament/Generic PLA @U1 0.6 nozzle.json  |   1 +
 .../filament/Generic PLA @U1 0.8 nozzle.json  |   1 +
 ...Generic PLA High Speed @U1 0.4 nozzle.json |   1 +
 ...Generic PLA High Speed @U1 0.6 nozzle.json |   1 +
 ...Generic PLA High Speed @U1 0.8 nozzle.json |   1 +
 .../Generic PLA-CF @U1 0.4 nozzle.json        |   1 +
 .../Generic PLA-CF @U1 0.6 nozzle.json        |   1 +
 .../Generic PLA-CF @U1 0.8 nozzle.json        |   1 +
 .../Polymaker General PLA Family @U1.json     |   2 +
 .../Polymaker Silk PLA Family @U1.json        |   2 +
 .../Polymaker Tough PLA Family @U1.json       |   1 +
 .../Fiberon ASA-CF08 @Snapmaker U1.json       |   1 +
 .../Fiberon PA12-CF10 @Snapmaker U1.json      |   4 +
 .../Fiberon PA6-CF20 @Snapmaker U1.json       |   4 +
 .../Fiberon PA612-ESD @Snapmaker U1.json      |   3 +
 .../Fiberon PETG-ESD @Snapmaker U1.json       |   1 +
 .../Panchroma PLA @Snapmaker U1.json          |   1 +
 .../PolyLite PETG @Snapmaker U1.json          |   1 +
 ...lyLite PETG Translucent @Snapmaker U1.json |   1 +
 ...lyLite PLA Pro Metallic @Snapmaker U1.json |   1 +
 .../Polymaker PLA @Snapmaker U1.json          |   1 +
 .../Snapmaker/filament/Snapmaker ABS @U1.json |   1 +
 .../filament/Snapmaker ABS Benchy @U1.json    |   8 ++
 .../Snapmaker/filament/Snapmaker ASA @U1.json |   1 +
 ...akaway Support For PLA @U1 0.2 nozzle.json |  11 ++
 ...akaway Support For PLA @U1 0.6 nozzle.json |  12 ++
 ...akaway Support For PLA @U1 0.8 nozzle.json |  10 ++
 ...apmaker Breakaway Support For PLA @U1.json |  11 ++
 .../Snapmaker PETG HF @U1 0.2 nozzle.json     |   4 +
 .../Snapmaker PETG HF @U1 0.6 nozzle.json     |   7 +
 .../Snapmaker PETG HF @U1 0.8 nozzle.json     |   7 +
 ...maker PETG Translucent @U1 0.2 nozzle.json |  10 ++
 ...maker PETG Translucent @U1 0.4 nozzle.json |   9 ++
 ...maker PETG Translucent @U1 0.6 nozzle.json |  10 ++
 ...maker PETG Translucent @U1 0.8 nozzle.json |   9 ++
 .../filament/Snapmaker PETG-CF @U1.json       |   1 +
 .../filament/Snapmaker PLA Basic @U1.json     |  27 ++++
 ...aker PLA Full Spectrum @U1 0.4 nozzle.json |  23 +++
 .../Snapmaker PLA Glow @U1 0.4 nozzle.json    |   7 +
 .../filament/Snapmaker PLA Lite @U1.json      |  26 ++++
 .../Snapmaker PLA Matte @U1 0.2 nozzle.json   |  24 ++++
 .../Snapmaker PLA Matte @U1 0.6 nozzle.json   |  25 ++++
 .../Snapmaker PLA Matte @U1 0.8 nozzle.json   |  25 ++++
 .../filament/Snapmaker PLA Matte @U1.json     |  14 ++
 .../Snapmaker PLA Silk @U1 0.2 nozzle.json    |  30 ++++
 .../Snapmaker PLA Silk @U1 0.6 nozzle.json    |  30 ++++
 .../Snapmaker PLA Silk @U1 0.8 nozzle.json    |  30 ++++
 .../filament/Snapmaker PLA Silk @U1.json      |  28 ++++
 ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json |   6 +
 ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json |   6 +
 ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json |   5 +
 .../filament/Snapmaker PLA SnapSpeed @U1.json |  25 ++++
 ...pmaker PLA Translucent @U1 0.2 nozzle.json |  21 +++
 ...pmaker PLA Translucent @U1 0.4 nozzle.json |  18 +++
 ...pmaker PLA Translucent @U1 0.6 nozzle.json |  18 +++
 ...pmaker PLA Translucent @U1 0.8 nozzle.json |  19 +++
 .../Snapmaker PLA Wood @U1 0.4 nozzle.json    |   9 ++
 .../Snapmaker PLA Wood @U1 0.6 nozzle.json    |  11 ++
 .../Snapmaker PLA Wood @U1 0.8 nozzle.json    |  12 ++
 .../Snapmaker PLA-CF @U1 0.4 nozzle.json      |   8 ++
 .../Snapmaker PLA-CF @U1 0.6 nozzle.json      |  11 ++
 .../Snapmaker PLA-CF @U1 0.8 nozzle.json      |  10 ++
 .../Snapmaker PVA @U1 0.6 nozzle.json         |  11 ++
 .../Snapmaker PVA @U1 0.8 nozzle.json         |   9 ++
 .../Snapmaker/filament/Snapmaker PVA @U1.json |  10 ++
 .../Snapmaker/filament/Snapmaker TPE @U1.json |   2 +
 .../Snapmaker TPU 90A @U1 0.6 nozzle.json     |  19 +++
 .../Snapmaker TPU 90A @U1 0.8 nozzle.json     |  17 +++
 .../filament/Snapmaker TPU 90A @U1.json       |  16 +++
 .../filament/Snapmaker TPU 95A @U1.json       |  22 +++
 .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json  |  17 +++
 .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json  |  17 +++
 .../filament/Snapmaker TPU 95A HF @U1.json    |  16 +++
 .../filament/Snapmaker TPU High-Flow @U1.json |   5 +
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  21 +++
 ...6 Standard @Snapmaker U1 (0.2 nozzle).json |   7 +
 ...Extra Fine @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  21 +++
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  35 +++++
 ...8 Standard @Snapmaker U1 (0.2 nozzle).json |   7 +
 ...gh Quality @Snapmaker U1 (0.2 nozzle).json |  21 +++
 ...0 Standard @Snapmaker U1 (0.2 nozzle).json |   7 +
 .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  35 +++++
 ...2 Standard @Snapmaker U1 (0.2 nozzle).json |   7 +
 ...4 Standard @Snapmaker U1 (0.2 nozzle).json |   7 +
 ...gh Quality @Snapmaker U1 (0.4 nozzle).json |  35 +++++
 ...16 Optimal @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...8 Standard @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...20 Quality @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...0 Standard @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...0 Standard @Snapmaker U1 (0.6 nozzle).json |   7 +
 ...0 Strength @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...20 Support @Snapmaker U1 (0.4 nozzle).json |   7 +
 ... Support W @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...4 Standard @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...4 Standard @Snapmaker U1 (0.8 nozzle).json |  14 ++
 ....25 Benchy @Snapmaker U1 (0.4 nozzle).json | 133 ++++++++++++++++++
 ...xtra Draft @Snapmaker U1 (0.4 nozzle).json |   7 +
 ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json |   7 +
 ...0 Standard @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...0 Strength @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...2 Standard @Snapmaker U1 (0.8 nozzle).json |  14 ++
 ...6 Standard @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...xtra Draft @Snapmaker U1 (0.6 nozzle).json |   7 +
 ...0 Standard @Snapmaker U1 (0.8 nozzle).json |  14 ++
 ...2 Standard @Snapmaker U1 (0.6 nozzle).json |  14 ++
 ...8 Standard @Snapmaker U1 (0.8 nozzle).json |  14 ++
 ...6 Standard @Snapmaker U1 (0.8 nozzle).json |   7 +
 112 files changed, 1347 insertions(+), 1 deletion(-)

diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json
index afe302529b..14adc77dfc 100644
--- a/resources/profiles/Snapmaker.json
+++ b/resources/profiles/Snapmaker.json
@@ -1,6 +1,6 @@
 {
 	"name": "Snapmaker",
-	"version": "02.04.00.21",
+	"version": "02.04.00.22",
 	"force_update": "0",
 	"description": "Snapmaker configurations",
 	"machine_model_list": [
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json
index e37b2d5a25..743800b360 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json
index 8524f17c21..ba65c7f999 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json
index f4887a84ca..73c997dd6b 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json
index 31fbc7174c..125a7a8f77 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json
index bb910121f9..5a0c7f73cd 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json
index 45c7bbda54..8826241929 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json
index 6fcd474adc..2be327d2c2 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json
index 13a94cd20c..24dd167796 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json
index f763ce696e..f354ff4078 100644
--- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json	
@@ -18,6 +18,7 @@
 		"High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	]
 }
diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json
index 171523998a..0086bd4128 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json	
@@ -12,9 +12,11 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"filament_vendor": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json
index aa8d9de628..f022a2f98e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json	
@@ -18,9 +18,11 @@
 		"Polymaker"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_range_high": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json
index b3ce7b53ea..a7f2a911f7 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json	
@@ -15,6 +15,7 @@
 		"1.23"
 	],
 	"filament_flow_ratio": [
+		"0.96",
 		"0.96"
 	],
 	"filament_vendor": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json
index 7117c25419..bd0df7f754 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json	
@@ -14,6 +14,7 @@
 		"15"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json
index 326c972bcb..0b0213973e 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json	
@@ -14,15 +14,19 @@
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json
index 3a825179b0..b4f18c6bb3 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json	
@@ -14,15 +14,19 @@
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"pressure_advance": [
+		"0.08",
 		"0.08"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json
index 444a3ca35e..a8b5296826 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json	
@@ -14,13 +14,16 @@
 		"15"
 	],
 	"filament_retraction_length": [
+		"1.0",
 		"1.0"
 	],
 	"filament_z_hop": [
+		"0.0",
 		"0.0"
 	],
 	"description": " ",
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json
index 91a8ccb00f..432d7c36b6 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json	
@@ -20,6 +20,7 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.04",
 		"0.04"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json
index acf326d5ca..1c1e32dacb 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json	
@@ -14,6 +14,7 @@
 		"15"
 	],
 	"filament_wipe": [
+		"0",
 		"0"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json
index e52f876805..467555862c 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json	
@@ -20,6 +20,7 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json
index 4702dd7ec9..307572f778 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json	
@@ -20,6 +20,7 @@
 		"70"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json
index cabbbe92b2..104d1abb2f 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json	
@@ -27,6 +27,7 @@
 		"0"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json
index b8fb82ab72..529ca24bf0 100644
--- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json	
+++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json	
@@ -18,6 +18,7 @@
 		"Direct Drive High Flow"
 	],
 	"pressure_advance": [
+		"0.05",
 		"0.05"
 	],
 	"filament_notes": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json
index 2a4346cc5d..19402cd821 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json	
@@ -11,6 +11,7 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json
index 47460e4c92..113f526b11 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json	
@@ -24,27 +24,35 @@
 		"2"
 	],
 	"filament_deretraction_speed": [
+		"55",
 		"55"
 	],
 	"filament_max_volumetric_speed": [
+		"31",
 		"31"
 	],
 	"filament_retract_when_changing_layer": [
+		"0",
 		"0"
 	],
 	"filament_retraction_length": [
+		"0.5",
 		"0.5"
 	],
 	"filament_z_hop": [
+		"0",
 		"0"
 	],
 	"filament_retraction_speed": [
+		"55",
 		"55"
 	],
 	"filament_wipe": [
+		"0",
 		"0"
 	],
 	"nozzle_temperature": [
+		"250",
 		"250"
 	],
 	"fan_max_speed": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json
index 2e27630834..132701bafd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json	
@@ -11,6 +11,7 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json
index 716c9926d1..835cb46246 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json	
@@ -21,9 +21,11 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
@@ -39,36 +41,45 @@
 		"1.3"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1",
 		"1"
 	],
 	"filament_max_volumetric_speed": [
+		"0.5",
 		"0.5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"240",
 		"240"
 	],
 	"nozzle_temperature_initial_layer": [
+		"240",
 		"240"
 	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"pressure_advance": [
+		"0.2",
 		"0.2"
 	],
 	"textured_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json
index 0092f4e870..36b7d88e06 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json	
@@ -21,21 +21,25 @@
 		"1.3"
 	],
 	"filament_flow_ratio": [
+		"0.95",
 		"0.95"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"textured_plate_temp": [
@@ -51,30 +55,38 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
 		"100"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"filament_cooling_moves": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json
index 9d296edafb..a720a9e27c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json	
@@ -21,9 +21,11 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
@@ -33,33 +35,41 @@
 		"1.3"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"0.93",
 		"0.93"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"3",
 		"3"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"textured_plate_temp_initial_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json
index 07c100e18d..b93c632c55 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json	
@@ -15,6 +15,7 @@
 		"PLA"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"additional_cooling_fan_speed": [
@@ -24,9 +25,11 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
@@ -36,9 +39,11 @@
 		"4"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1",
 		"1"
 	],
 	"filament_loading_speed": [
@@ -57,12 +62,15 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -75,15 +83,18 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_initial_layer": [
+		"210",
 		"210"
 	],
 	"nozzle_temperature_range_low": [
 		"190"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.03"
 	],
 	"textured_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json
index c015a5d3df..549fb49ffb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json	
@@ -49,9 +49,11 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1.5",
 		"1.5"
 	],
 	"filament_start_gcode": [
@@ -67,6 +69,7 @@
 		"80"
 	],
 	"nozzle_temperature": [
+		"245",
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
@@ -98,6 +101,7 @@
 		"80"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"filament_notes": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json
index 1103fb9192..89c53be8aa 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json	
@@ -36,6 +36,7 @@
 		"\n"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming": [
@@ -48,9 +49,11 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"2.5",
 		"2.5"
 	],
 	"filament_start_gcode": [
@@ -60,12 +63,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"1",
 		"1"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
@@ -75,6 +81,7 @@
 		"80"
 	],
 	"nozzle_temperature": [
+		"245",
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json
index d1fea8441e..2ff43ed5f6 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json	
@@ -33,6 +33,7 @@
 		"30"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming": [
@@ -45,9 +46,11 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_start_gcode": [
@@ -57,12 +60,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
@@ -72,6 +78,7 @@
 		"80"
 	],
 	"nozzle_temperature": [
+		"245",
 		"245"
 	],
 	"nozzle_temperature_initial_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json
index 51725376e7..22b2f18955 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json	
@@ -17,9 +17,11 @@
 		"3"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
@@ -38,12 +40,14 @@
 		"1.25"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_loading_speed": [
 		"28"
 	],
 	"filament_max_volumetric_speed": [
+		"1",
 		"1"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -59,15 +63,19 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"50",
 		"50"
 	],
 	"filament_unloading_speed": [
@@ -77,12 +85,14 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"nozzle_temperature_initial_layer": [
+		"250",
 		"250"
 	],
 	"nozzle_temperature_range_low": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json
index 0bec924fdd..db05ae3bc1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json	
@@ -14,9 +14,11 @@
 		"3"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
@@ -32,6 +34,7 @@
 		"24.99"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_loading_speed": [
@@ -50,12 +53,15 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -65,15 +71,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"nozzle_temperature": [
+		"250",
 		"250"
 	],
 	"nozzle_temperature_initial_layer": [
+		"250",
 		"250"
 	],
 	"nozzle_temperature_range_low": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json
index 0f2a565897..69702eb4a1 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json	
@@ -14,9 +14,11 @@
 		"3"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
@@ -32,15 +34,18 @@
 		"1.25"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_max_volumetric_speed": [
+		"16",
 		"16"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"nozzle_temperature_initial_layer": [
+		"250",
 		"250"
 	],
 	"nozzle_temperature_range_low": [
@@ -81,12 +86,15 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"1.2",
 		"1.2"
 	],
 	"filament_retraction_minimum_travel": [
+		"1",
 		"1"
 	],
 	"filament_unloading_speed": [
@@ -96,9 +104,11 @@
 		"100"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"enable_pressure_advance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json
index d8cffc3787..39989ccc7d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json	
@@ -14,9 +14,11 @@
 		"3"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_max_speed": [
@@ -32,15 +34,18 @@
 		"1.25"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_max_volumetric_speed": [
+		"16",
 		"16"
 	],
 	"hot_plate_temp": [
 		"80"
 	],
 	"nozzle_temperature_initial_layer": [
+		"250",
 		"250"
 	],
 	"nozzle_temperature_range_low": [
@@ -81,12 +86,15 @@
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -96,6 +104,7 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"enable_pressure_advance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json
index e58dd27968..174e0f9d29 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json	
@@ -58,6 +58,7 @@
 		"18"
 	],
 	"filament_retract_length_toolchange": [
+		"nil",
 		"nil"
 	],
 	"pressure_advance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json
index cb6d5bd046..8c970ef1c4 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -50,12 +56,14 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -83,6 +91,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -92,6 +101,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_is_support": [
@@ -104,9 +114,11 @@
 		"50"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -128,33 +140,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -191,15 +213,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"full_fan_speed_layer": [
@@ -227,6 +253,7 @@
 		"0.4157"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"reduce_fan_stop_start_freq": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json
index e58ce8df61..a03c3e6b9d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -39,6 +44,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -51,6 +57,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -85,6 +92,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -94,6 +102,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_is_support": [
@@ -106,9 +115,11 @@
 		"50"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -130,6 +141,7 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
@@ -137,21 +149,27 @@
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
@@ -159,9 +177,11 @@
 		"0.5"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -198,12 +218,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json
index fa22f4812d..fe10c56d81 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json	
@@ -15,9 +15,11 @@
 		"100"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cooling_final_speed": [
@@ -59,12 +61,15 @@
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -74,9 +79,11 @@
 		"100"
 	],
 	"filament_z_hop": [
+		"0.2",
 		"0.2"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp_initial_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json
index 8e5c511b1b..fb56f3c5bd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,12 +59,14 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"eng_plate_temp": [
@@ -86,6 +94,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -95,6 +104,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_is_support": [
@@ -107,9 +117,11 @@
 		"50"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"15",
 		"15"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -131,30 +143,39 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -191,15 +212,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"full_fan_speed_layer": [
@@ -227,6 +252,7 @@
 		"0.4157"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"reduce_fan_stop_start_freq": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json
index ab7b23a405..b02152df2f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -87,6 +94,7 @@
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_multitool_ramming": [
@@ -99,30 +107,39 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"2",
 		"2"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -150,12 +167,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"full_fan_speed_layer": [
@@ -204,6 +224,7 @@
 		"40"
 	],
 	"filament_max_volumetric_speed": [
+		"2",
 		"2"
 	],
 	"hot_plate_temp": [
@@ -231,6 +252,7 @@
 		"2"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
@@ -253,6 +275,7 @@
 		"4"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_stamping_distance": [
@@ -265,6 +288,7 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"nozzle_temperature": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json
index c4cf484227..abc1877f4d 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -78,6 +85,7 @@
 		"1.26"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -90,9 +98,11 @@
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -108,33 +118,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -162,15 +182,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"full_fan_speed_layer": [
@@ -253,6 +277,7 @@
 		"10"
 	],
 	"filament_retraction_length": [
+		"0.6",
 		"0.6"
 	],
 	"filament_stamping_distance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json
index 41548165b6..e9ab4bade2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -91,9 +98,11 @@
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -109,30 +118,39 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -160,15 +178,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"full_fan_speed_layer": [
@@ -239,6 +261,7 @@
 		"2"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_loading_speed": [
@@ -254,9 +277,11 @@
 		"10"
 	],
 	"filament_retraction_length": [
+		"0.6",
 		"0.6"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_stamping_distance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json
index b97e9dbba4..1ef9e20fa2 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -43,6 +48,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -55,6 +61,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -108,6 +115,7 @@
 		"50"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
@@ -133,18 +141,23 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
@@ -152,6 +165,7 @@
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json
index 18de9edada..abb41b2196 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -42,6 +47,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -51,12 +57,14 @@
 		"60"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -75,6 +83,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -84,12 +93,14 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"1.02",
 		"1.02"
 	],
 	"filament_is_support": [
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -111,33 +122,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -165,15 +186,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
@@ -246,9 +271,11 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
+		"2",
 		"2"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"filament_stamping_distance": [
@@ -267,12 +294,15 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json
index 3526a1c871..deb6ce4833 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -42,6 +47,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -51,12 +57,14 @@
 		"60"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -75,6 +83,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -84,12 +93,14 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_is_support": [
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -111,33 +122,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -165,15 +186,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"1",
 		"1"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
@@ -246,9 +271,11 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"filament_stamping_distance": [
@@ -267,12 +294,15 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json
index 7e11c05252..188fe678c9 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -42,6 +47,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -51,12 +57,14 @@
 		"60"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -75,6 +83,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -84,12 +93,14 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_is_support": [
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -111,33 +122,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -165,15 +186,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"1",
 		"1"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
@@ -246,9 +271,11 @@
 		"3"
 	],
 	"filament_max_volumetric_speed": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"filament_stamping_distance": [
@@ -267,12 +294,15 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json
index acd1c82116..6dfb87b84b 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json	
@@ -12,21 +12,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -43,6 +48,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -52,12 +58,14 @@
 		"60"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -76,6 +84,7 @@
 		"1.32"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -85,12 +94,14 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.98",
 		"0.98"
 	],
 	"filament_is_support": [
 		"0"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -112,33 +123,43 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -166,12 +187,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
@@ -252,6 +276,7 @@
 		"12"
 	],
 	"filament_retraction_length": [
+		"0.2",
 		"0.2"
 	],
 	"filament_stamping_distance": [
@@ -270,12 +295,15 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"pressure_advance": [
+		"0.015",
 		"0.015"
 	],
 	"filament_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json
index 842d5fee73..4138a54e34 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json	
@@ -7,24 +7,30 @@
 	"setting_id": "jsAgNNiUC6DoO7rz",
 	"instantiation": "true",
 	"filament_deretraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_flow_ratio": [
+		"1.01",
 		"1.01"
 	],
 	"filament_max_volumetric_speed": [
+		"2",
 		"2"
 	],
 	"filament_multitool_ramming_flow": [
 		"30"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json
index 81b67fee51..18aefb2ecd 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json	
@@ -11,24 +11,30 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"filament_deretraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_multitool_ramming_flow": [
 		"30"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1.6",
 		"1.6"
 	],
 	"filament_retraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"textured_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json
index 1654724651..1dacec6c8e 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_deretraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_multitool_ramming_flow": [
 		"30"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"1.6",
 		"1.6"
 	],
 	"filament_retraction_speed": [
+		"30",
 		"30"
 	],
 	"nozzle_temperature": [
+		"215",
 		"215"
 	],
 	"pressure_advance": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json
index 98e2cb5877..1d4bb8ae38 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -50,6 +56,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -84,6 +91,7 @@
 		"1.24"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_diameter": [
@@ -93,6 +101,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.966",
 		"0.966"
 	],
 	"filament_is_support": [
@@ -105,6 +114,7 @@
 		"50"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
@@ -131,36 +141,47 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_restart_extra": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"1.2",
 		"1.2"
 	],
 	"filament_retraction_minimum_travel": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -197,15 +218,19 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"nil",
 		"nil"
 	],
 	"filament_wipe_distance": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"0.4",
 		"0.4"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json
index 2e2732dbd5..3505f346af 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.2 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -41,6 +46,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -93,6 +100,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"1.02",
 		"1.02"
 	],
 	"filament_is_support": [
@@ -105,9 +113,11 @@
 		"3"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"1.6",
 		"1.6"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -129,27 +139,35 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"0%",
 		"0%"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"0.2",
 		"0.2"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -186,12 +204,15 @@
 		"Snapmaker"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"1",
 		"1"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json
index 87cbfc8ed8..80fd2f2dfb 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -41,6 +46,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -89,6 +96,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_is_support": [
@@ -101,9 +109,11 @@
 		"3"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -125,24 +135,31 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"0.2",
 		"0.2"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -179,6 +196,7 @@
 		"Snapmaker"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json
index b9320cf13b..38c7df86ac 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.6 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -41,6 +46,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -102,9 +109,11 @@
 		"3"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -126,27 +135,35 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"0%",
 		"0%"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"0.5",
 		"0.5"
 	],
 	"filament_retraction_speed": [
+		"50",
 		"50"
 	],
 	"filament_shrink": [
@@ -183,6 +200,7 @@
 		"Snapmaker"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json
index c9f55207ca..05425cc8ea 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"additional_cooling_fan_speed": [
@@ -41,6 +46,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -53,6 +59,7 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"enable_overhang_bridge_fan": [
@@ -93,6 +100,7 @@
 		"; filament end gcode \n"
 	],
 	"filament_flow_ratio": [
+		"0.95",
 		"0.95"
 	],
 	"filament_is_support": [
@@ -105,9 +113,11 @@
 		"3"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -129,27 +139,35 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_before_wipe": [
+		"0%",
 		"0%"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_shrink": [
@@ -186,6 +204,7 @@
 		"Snapmaker"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"full_fan_speed_layer": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json
index 6ba340e303..528f6a8075 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json	
@@ -39,6 +39,7 @@
 		"65"
 	],
 	"filament_flow_ratio": [
+		"0.97",
 		"0.97"
 	],
 	"filament_max_volumetric_speed": [
@@ -56,6 +57,7 @@
 		"6"
 	],
 	"filament_retraction_length": [
+		"0.6",
 		"0.6"
 	],
 	"pressure_advance": [
@@ -66,12 +68,14 @@
 		"4"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -81,21 +85,26 @@
 		"35"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"nozzle_temperature": [
+		"220",
 		"220"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json
index 8401fb7635..fa527b2520 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json	
@@ -43,6 +43,7 @@
 		"65"
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	],
 	"filament_multitool_ramming_flow": [
@@ -52,9 +53,11 @@
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"pressure_advance": [
@@ -68,15 +71,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -86,21 +92,26 @@
 		"35"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"nozzle_temperature": [
+		"220",
 		"220"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json
index b645dd168a..808ab849b3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json	
@@ -43,9 +43,11 @@
 		"65"
 	],
 	"filament_flow_ratio": [
+		"0.965",
 		"0.965"
 	],
 	"filament_max_volumetric_speed": [
+		"20",
 		"20"
 	],
 	"filament_multitool_ramming_flow": [
@@ -55,9 +57,11 @@
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"5",
 		"5"
 	],
 	"filament_retraction_length": [
+		"0.4",
 		"0.4"
 	],
 	"pressure_advance": [
@@ -71,15 +75,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -89,21 +96,26 @@
 		"35"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"nozzle_temperature": [
+		"220",
 		"220"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json
index 98db5dbfbb..1f0a2d2fa3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json	
@@ -61,9 +61,11 @@
 		"PLA-CF"
 	],
 	"filament_z_hop": [
+		"0.4",
 		"0.4"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
@@ -85,12 +87,14 @@
 		"0.02"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -100,18 +104,22 @@
 		"45"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json
index 41f7688d01..9b720b69b0 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json	
@@ -43,6 +43,7 @@
 		"65"
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -52,15 +53,18 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"2",
 		"2"
 	],
 	"filament_type": [
 		"PLA-CF"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
@@ -91,15 +95,18 @@
 		"8"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -109,15 +116,19 @@
 		"45"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json
index a589a22a83..641f0ac199 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json	
@@ -43,6 +43,7 @@
 		"65"
 	],
 	"filament_max_volumetric_speed": [
+		"18",
 		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
@@ -52,15 +53,18 @@
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"3",
 		"3"
 	],
 	"filament_type": [
 		"PLA-CF"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"nozzle_temperature": [
@@ -91,12 +95,14 @@
 		"8"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -106,15 +112,19 @@
 		"45"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"overhang_fan_threshold": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json
index c8899e0fcc..a1be5a1146 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json	
@@ -17,15 +17,18 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_cost": [
 		"79.98"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
@@ -33,36 +36,44 @@
 		"0.9506"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_minimum_travel": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_soluble": [
 		"1"
 	],
 	"filament_wipe_distance": [
+		"2",
 		"2"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_initial_layer": [
+		"230",
 		"230"
 	],
 	"nozzle_temperature_range_low": [
 		"210"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.03"
 	],
 	"slow_down_layer_time": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json
index 0be4a98af7..2bbe8d07e4 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json	
@@ -17,9 +17,11 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
@@ -29,6 +31,7 @@
 		"79.98"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
@@ -36,12 +39,15 @@
 		"0.9312"
 	],
 	"filament_retract_length_toolchange": [
+		"10",
 		"10"
 	],
 	"filament_retraction_length": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_soluble": [
@@ -51,15 +57,18 @@
 		"65"
 	],
 	"nozzle_temperature": [
+		"225",
 		"225"
 	],
 	"nozzle_temperature_initial_layer": [
+		"225",
 		"225"
 	],
 	"nozzle_temperature_range_low": [
 		"205"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.03"
 	],
 	"slow_down_layer_time": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json
index a84579c6aa..c903cfc491 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json	
@@ -11,12 +11,14 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"enable_pressure_advance": [
+		"1",
 		"1"
 	],
 	"nozzle_temperature_range_high": [
 		"240"
 	],
 	"pressure_advance": [
+		"0.03",
 		"0.03"
 	],
 	"additional_cooling_fan_speed": [
@@ -26,9 +28,11 @@
 		"1"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"fan_min_speed": [
@@ -44,6 +48,7 @@
 		"4"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_loading_speed": [
@@ -66,6 +71,7 @@
 		"0.1"
 	],
 	"filament_retract_length_toolchange": [
+		"4",
 		"4"
 	],
 	"filament_retraction_length": [
@@ -73,6 +79,7 @@
 		"0.6"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_unloading_speed": [
@@ -82,15 +89,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"hot_plate_temp_initial_layer": [
 		"65"
 	],
 	"nozzle_temperature": [
+		"240",
 		"240"
 	],
 	"nozzle_temperature_initial_layer": [
+		"240",
 		"240"
 	],
 	"slow_down_layer_time": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json
index 7860c778f9..9eed42efe7 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json	
@@ -21,12 +21,14 @@
 		"65"
 	],
 	"filament_flow_ratio": [
+		"1.1",
 		"1.1"
 	],
 	"filament_density": [
 		"1.22"
 	],
 	"filament_max_volumetric_speed": [
+		"7.2",
 		"7.2"
 	],
 	"fan_max_speed": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json
index 4f6e935751..51aec20d5c 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json	
@@ -8,6 +8,7 @@
 	"filament_id": "OFY7jxcS",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
+		"3.2",
 		"3.2"
 	],
 	"compatible_printers": [
@@ -27,42 +28,52 @@
 		"0.1"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"additional_cooling_fan_speed": [
 		"100"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_deretraction_speed": [
+		"20",
 		"20"
 	],
 	"filament_flow_ratio": [
+		"1.093",
 		"1.093"
 	],
 	"filament_multitool_ramming_flow": [
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"4",
 		"4"
 	],
 	"filament_retraction_length": [
+		"0.6",
 		"0.6"
 	],
 	"filament_retraction_speed": [
+		"20",
 		"20"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"220",
 		"220"
 	],
 	"nozzle_temperature_initial_layer": [
+		"220",
 		"220"
 	],
 	"slow_down_layer_time": [
@@ -72,15 +83,19 @@
 		"240"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"filament_wipe": [
+		"1",
 		"1"
 	],
 	"filament_wipe_distance": [
+		"0",
 		"0"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
@@ -108,18 +123,22 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json
index 005cf1bf08..8def2c08da 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json	
@@ -8,6 +8,7 @@
 	"filament_id": "OFY7jxcS",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
+		"3.5",
 		"3.5"
 	],
 	"compatible_printers": [
@@ -27,39 +28,49 @@
 		"0.1"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"filament_deretraction_speed": [
+		"20",
 		"20"
 	],
 	"filament_flow_ratio": [
+		"1.095",
 		"1.095"
 	],
 	"filament_multitool_ramming_flow": [
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"4",
 		"4"
 	],
 	"filament_retraction_length": [
+		"1.2",
 		"1.2"
 	],
 	"filament_retraction_speed": [
+		"20",
 		"20"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"220",
 		"220"
 	],
 	"nozzle_temperature_initial_layer": [
+		"220",
 		"220"
 	],
 	"slow_down_layer_time": [
@@ -69,9 +80,11 @@
 		"240"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
@@ -99,18 +112,22 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json
index 6579347154..aeea4cc694 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json	
@@ -8,6 +8,7 @@
 	"filament_id": "OFY7jxcS",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
+		"3.2",
 		"3.2"
 	],
 	"compatible_printers": [
@@ -27,45 +28,55 @@
 		"0.1"
 	],
 	"pressure_advance": [
+		"0.4",
 		"0.4"
 	],
 	"additional_cooling_fan_speed": [
 		"100"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"100",
 		"100"
 	],
 	"during_print_exhaust_fan_speed": [
+		"100",
 		"100"
 	],
 	"filament_deretraction_speed": [
+		"15",
 		"15"
 	],
 	"filament_flow_ratio": [
+		"1.045",
 		"1.045"
 	],
 	"filament_multitool_ramming_flow": [
 		"5"
 	],
 	"filament_retract_length_toolchange": [
+		"2",
 		"2"
 	],
 	"filament_retraction_length": [
+		"1.2",
 		"1.2"
 	],
 	"filament_retraction_speed": [
+		"15",
 		"15"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"slow_down_layer_time": [
 		"14"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
@@ -93,21 +104,26 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json
index af1137ccca..f7b73ac74f 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json	
@@ -11,21 +11,26 @@
 		"Snapmaker U1 (0.4 High Flow nozzle)"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"activate_chamber_temp_control": [
 		"0"
 	],
 	"adaptive_pressure_advance": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_bridges": [
+		"0",
 		"0"
 	],
 	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0",
 		"0,0,0\n0,0,0"
 	],
 	"adaptive_pressure_advance_overhangs": [
+		"0",
 		"0"
 	],
 	"chamber_temperature": [
@@ -38,6 +43,7 @@
 	"compatible_prints": [],
 	"compatible_prints_condition": "",
 	"complete_print_exhaust_fan_speed": [
+		"80",
 		"80"
 	],
 	"cool_plate_temp": [
@@ -50,12 +56,14 @@
 		"0"
 	],
 	"during_print_exhaust_fan_speed": [
+		"60",
 		"60"
 	],
 	"enable_overhang_bridge_fan": [
 		"1"
 	],
 	"enable_pressure_advance": [
+		"0",
 		"0"
 	],
 	"eng_plate_temp": [
@@ -89,6 +97,7 @@
 		"1.24"
 	],
 	"filament_deretraction_speed": [
+		"8",
 		"8"
 	],
 	"filament_diameter": [
@@ -107,9 +116,11 @@
 		"3"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"3.2",
 		"3.2"
 	],
 	"filament_multitool_ramming": [
@@ -128,21 +139,27 @@
 		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 	],
 	"filament_retract_lift_above": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_below": [
+		"nil",
 		"nil"
 	],
 	"filament_retract_lift_enforce": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_length": [
+		"1.4",
 		"1.4"
 	],
 	"filament_retraction_speed": [
+		"30",
 		"30"
 	],
 	"filament_shrink": [
@@ -179,9 +196,11 @@
 		"Snapmaker"
 	],
 	"filament_z_hop": [
+		"0.4",
 		"0.4"
 	],
 	"filament_z_hop_types": [
+		"Auto Lift",
 		"Auto Lift"
 	],
 	"full_fan_speed_layer": [
@@ -197,9 +216,11 @@
 		"0"
 	],
 	"nozzle_temperature": [
+		"225",
 		"225"
 	],
 	"nozzle_temperature_initial_layer": [
+		"225",
 		"225"
 	],
 	"overhang_fan_speed": [
@@ -212,6 +233,7 @@
 		"0.4157"
 	],
 	"pressure_advance": [
+		"0.02",
 		"0.02"
 	],
 	"reduce_fan_stop_start_freq": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json
index b3d48fd8dd..6d23763c95 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json	
@@ -33,39 +33,48 @@
 		"100"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1.067",
 		"1.067"
 	],
 	"filament_max_volumetric_speed": [
+		"12",
 		"12"
 	],
 	"filament_multitool_ramming_flow": [
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"8",
 		"8"
 	],
 	"filament_retraction_length": [
+		"0.8",
 		"0.8"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"215",
 		"215"
 	],
 	"nozzle_temperature_initial_layer": [
+		"215",
 		"215"
 	],
 	"overhang_fan_threshold": [
 		"95%"
 	],
 	"pressure_advance": [
+		"0.14",
 		"0.14"
 	],
 	"slow_down_layer_time": [
@@ -75,15 +84,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -93,6 +105,7 @@
 		"30"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"eng_plate_temp": [
@@ -105,18 +118,22 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json
index f72a73a7dc..b834aaeed8 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json	
@@ -33,39 +33,48 @@
 		"100"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1.045",
 		"1.045"
 	],
 	"filament_max_volumetric_speed": [
+		"16",
 		"16"
 	],
 	"filament_multitool_ramming_flow": [
 		"15"
 	],
 	"filament_retract_length_toolchange": [
+		"8",
 		"8"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"215",
 		"215"
 	],
 	"nozzle_temperature_initial_layer": [
+		"215",
 		"215"
 	],
 	"overhang_fan_threshold": [
 		"95%"
 	],
 	"pressure_advance": [
+		"0.12",
 		"0.12"
 	],
 	"slow_down_layer_time": [
@@ -75,15 +84,18 @@
 		"100"
 	],
 	"filament_z_hop_types": [
+		"Slope Lift",
 		"Slope Lift"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -93,6 +105,7 @@
 		"30"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"eng_plate_temp": [
@@ -105,18 +118,22 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json
index f91214894c..63905a89c3 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json	
@@ -33,48 +33,58 @@
 		"10"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_flow_ratio": [
+		"1.067",
 		"1.067"
 	],
 	"filament_max_volumetric_speed": [
+		"9",
 		"9"
 	],
 	"filament_multitool_ramming_flow": [
 		"10"
 	],
 	"filament_retract_length_toolchange": [
+		"6",
 		"6"
 	],
 	"filament_retraction_length": [
+		"1",
 		"1"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_vendor": [
 		"Snapmaker"
 	],
 	"nozzle_temperature": [
+		"230",
 		"230"
 	],
 	"overhang_fan_threshold": [
 		"25%"
 	],
 	"pressure_advance": [
+		"0.23",
 		"0.23"
 	],
 	"slow_down_layer_time": [
 		"10"
 	],
 	"activate_air_filtration": [
+		"0",
 		"0"
 	],
 	"chamber_temperatures": [
 		"0"
 	],
 	"complete_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"cool_plate_temp": [
@@ -84,6 +94,7 @@
 		"30"
 	],
 	"during_print_exhaust_fan_speed": [
+		"70",
 		"70"
 	],
 	"eng_plate_temp": [
@@ -96,21 +107,26 @@
 		"20"
 	],
 	"filament_long_retractions_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
 	"filament_retract_when_changing_layer": [
+		"nil",
 		"nil"
 	],
 	"filament_retraction_distances_when_cut": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop": [
+		"nil",
 		"nil"
 	],
 	"filament_z_hop_types": [
+		"nil",
 		"nil"
 	],
 	"hot_plate_temp": [
diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json
index 949a230b9f..6dce65a512 100644
--- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json	
+++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json	
@@ -16,18 +16,23 @@
 		"Snapmaker U1 (0.8 High Flow nozzle)"
 	],
 	"filament_flow_ratio": [
+		"0.983",
 		"0.983"
 	],
 	"filament_deretraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_max_volumetric_speed": [
+		"7.6",
 		"7.6"
 	],
 	"filament_retraction_length": [
+		"0.8",
 		"0.8"
 	],
 	"filament_retraction_speed": [
+		"nil",
 		"nil"
 	],
 	"filament_notes": [
diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json
index 47dc63e06d..73cee4710b 100644
--- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -8,10 +8,24 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"elefant_foot_compensation": "0.15",
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -36,6 +50,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "13.5",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json
index 710f8d2547..98f28fe3d5 100644
--- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -19,6 +19,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "13.5",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json
index 821225907e..8f8d3aa158 100644
--- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -15,6 +15,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "18",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json
index bff8ea47e6..1ae8b8aba2 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -8,10 +8,24 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"elefant_foot_compensation": "0.15",
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -36,6 +50,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "18",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json
index 8b12c1409d..6ba52ed409 100644
--- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -8,9 +8,23 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"gap_infill_speed": [
+		"210",
+		"210",
+		"210",
+		"210",
+		"210",
+		"210",
+		"210",
 		"210"
 	],
 	"inner_wall_speed": [
@@ -34,6 +48,13 @@
 		"600"
 	],
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -58,6 +79,13 @@
 		"600"
 	],
 	"top_surface_speed": [
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
 		"150"
 	],
 	"compatible_printers": [
@@ -68,6 +96,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "18",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json
index fc2378404f..0d17be8403 100644
--- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -19,6 +19,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "18",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json
index 80a6b49330..d4b6f44745 100644
--- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json	
@@ -8,10 +8,24 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"elefant_foot_compensation": "0.15",
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -36,6 +50,13 @@
 	"prime_tower_width": "28",
 	"prime_volume": "25",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json
index 8bd076ec2c..e6486cee9b 100644
--- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -26,6 +26,13 @@
 	"wipe_tower_extra_spacing": "120%",
 	"wipe_tower_wall_type": "rib",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"print_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json
index 5b82a0021a..f72b90e84b 100644
--- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json	
@@ -13,6 +13,13 @@
 	],
 	"ooze_prevention": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json
index 7de2bca333..d4a347bc1f 100644
--- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -8,9 +8,23 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"gap_infill_speed": [
+		"230",
+		"230",
+		"230",
+		"230",
+		"230",
+		"230",
+		"230",
 		"230"
 	],
 	"inner_wall_speed": [
@@ -34,6 +48,13 @@
 		"600"
 	],
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -58,6 +79,13 @@
 		"600"
 	],
 	"top_surface_speed": [
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
 		"150"
 	],
 	"compatible_printers": [
@@ -67,6 +95,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "27",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"wipe_tower_filament": "0",
diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json
index 20f1c91813..c1108faea3 100644
--- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -19,6 +19,13 @@
 	"prime_tower_width": "28",
 	"prime_volume": "27",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json
index 294b1329f3..5735194c70 100644
--- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json	
@@ -19,6 +19,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "32",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json
index 8ecdd89b6e..5126a45f91 100644
--- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -8,9 +8,23 @@
 	"instantiation": "true",
 	"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
 	"default_acceleration": [
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
+		"4000",
 		"4000"
 	],
 	"gap_infill_speed": [
+		"250",
+		"250",
+		"250",
+		"250",
+		"250",
+		"250",
+		"250",
 		"250"
 	],
 	"inner_wall_speed": [
@@ -34,6 +48,13 @@
 		"600"
 	],
 	"outer_wall_acceleration": [
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
+		"2000",
 		"2000"
 	],
 	"outer_wall_speed": [
@@ -58,6 +79,13 @@
 		"600"
 	],
 	"top_surface_speed": [
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
+		"150",
 		"150"
 	],
 	"compatible_printers": [
@@ -68,6 +96,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "36",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json
index bca9e8d7fb..c5f4c492da 100644
--- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json	
@@ -15,6 +15,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "36",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json
index b2c06523ac..c9a5216347 100644
--- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"layer_height": "0.25",
@@ -29,6 +36,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json
index 87a70ad4bb..701b719713 100644
--- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json	
@@ -14,6 +14,13 @@
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json
index 532737eb20..75b4c935d5 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json	
@@ -15,6 +15,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "45",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json
index d605622b96..8dcbb68fa5 100644
--- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"ooze_prevention": "1",
 	"prime_tower_width": "30",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json
index cc36e8f20f..157333ffad 100644
--- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json	
@@ -27,6 +27,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "45",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json
index 459f3afefa..5e031b3517 100644
--- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json	
@@ -15,6 +15,13 @@
 	"prime_tower_width": "40",
 	"prime_volume": "15",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json
index 6cfc2cba6d..57a763a355 100644
--- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json	
@@ -22,6 +22,13 @@
 	"prime_tower_width": "50",
 	"prime_volume": "38",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json
index 90c2cb8f5c..b1ad97d537 100644
--- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -15,6 +15,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "54",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json
index 883fef3cc2..8aae7fa25c 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -28,6 +35,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json
index a47d78f04e..1c08f23f8e 100644
--- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"min_width_top_surface": "90",
@@ -29,6 +36,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json
index ad0960c02a..f5c9737efd 100644
--- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json	
@@ -14,9 +14,23 @@
 	"top_shell_layers": "3",
 	"top_shell_thickness": "0.5",
 	"initial_layer_speed": [
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
 		"100"
 	],
 	"initial_layer_infill_speed": [
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
 		"180"
 	],
 	"outer_wall_speed": [
@@ -60,22 +74,64 @@
 		"600"
 	],
 	"top_surface_speed": [
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
 		"180"
 	],
 	"gap_infill_speed": [
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
 		"200"
 	],
 	"ironing_speed": "30",
 	"enable_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"overhang_1_4_speed": [
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
+		"180",
 		"180"
 	],
 	"overhang_2_4_speed": [
+		"20",
+		"20",
+		"20",
+		"20",
+		"20",
+		"20",
+		"20",
 		"20"
 	],
 	"overhang_3_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10",
+		"10",
+		"10",
+		"10",
 		"10"
 	],
 	"layer_height": "0.25",
@@ -100,36 +156,113 @@
 	"top_surface_line_width": "0.5",
 	"bottom_shell_layers": "2",
 	"initial_layer_travel_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"bridge_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"bridge_speed": [
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
+		"100",
 		"100"
 	],
 	"default_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"inner_wall_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"internal_solid_infill_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"outer_wall_acceleration": [
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
 		"1600"
 	],
 	"small_perimeter_speed": [
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
+		"200",
 		"200"
 	],
 	"sparse_infill_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"top_surface_acceleration": [
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
+		"3000",
 		"3000"
 	],
 	"initial_layer_acceleration": [
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
+		"1600",
 		"1600"
 	],
 	"print_extruder_variant": [
diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json
index 93a4f26ef5..3b2e7f8746 100644
--- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json	
@@ -14,6 +14,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "63",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"wipe_tower_filament": "0",
diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json
index 1c5fa45ffd..1ca162e67a 100644
--- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -16,6 +16,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "68",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json
index 43833fe9c1..b84b343dcc 100644
--- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -27,6 +34,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json
index 568e838002..470490fb9f 100644
--- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json	
@@ -17,6 +17,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_width": "30",
@@ -29,6 +36,13 @@
 	"precise_outer_wall": "1",
 	"prime_tower_brim_width": "5",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json
index 010c82bb91..97ae45ed4e 100644
--- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -30,6 +37,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json
index ee1f213106..e964e08e5d 100644
--- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -28,6 +35,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json
index ab4831845f..51b76f6e33 100644
--- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json	
@@ -16,6 +16,13 @@
 	"prime_tower_width": "30",
 	"prime_volume": "90",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json
index a935192df9..bf9f2644d6 100644
--- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -31,6 +38,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json
index 705021d73d..4338dccaa8 100644
--- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"precise_z_height": "0",
@@ -28,6 +35,13 @@
 	"enable_arc_fitting": "0",
 	"ooze_prevention": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json
index c0585abda9..45b2d9431b 100644
--- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -15,6 +15,13 @@
 	"filter_out_gap_fill": "1",
 	"gap_fill_target": "topbottom",
 	"internal_bridge_speed": [
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
+		"100%",
 		"100%"
 	],
 	"prime_tower_brim_width": "5",
@@ -28,6 +35,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",
diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json
index 22beae020e..b2fb877e5f 100644
--- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
+++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json	
@@ -25,6 +25,13 @@
 	"ooze_prevention": "1",
 	"precise_outer_wall": "1",
 	"slowdown_for_curled_perimeters": [
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
+		"0",
 		"0"
 	],
 	"standby_temperature_delta": "-150",