Added and updated legacy and ender printer variants (#13948)

2026-09-27 19:01:02 +00:00 · 2026-09-20 21:23:00 +08:00
parent d650c395ff
commit 2cd52edb33
510 changed files with 50202 additions and 378 deletions
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality CR-10 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "tsVnTn07ACdoHqPV",
+	"instantiation": "true",
+	"printer_model": "Creality CR-10",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality CR-10 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "400",
+	"extruder_clearance_height_to_rod": "33",
+	"extruder_clearance_radius": "70",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z1 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning  \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed  \nM84 X Y E ;Disable all steppers but Z ",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000,5000",
+	"machine_max_acceleration_extruding": "500,500",
+	"machine_max_acceleration_retracting": "500,1000",
+	"machine_max_acceleration_travel": "500,500",
+	"machine_max_acceleration_x": "500,500",
+	"machine_max_acceleration_y": "500,500",
+	"machine_max_acceleration_z": "500,500",
+	"machine_max_jerk_e": "5,5",
+	"machine_max_jerk_x": "10,8",
+	"machine_max_jerk_y": "10,8",
+	"machine_max_jerk_z": "0.4,0.4",
+	"machine_max_speed_e": "50,60",
+	"machine_max_speed_x": "500,500",
+	"machine_max_speed_y": "500,500",
+	"machine_max_speed_z": "10,10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25 ;pause print",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "400",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @CR-10-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "40",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -116,7 +116,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
@@ -116,7 +116,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
@@ -116,7 +116,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
@@ -116,7 +116,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
@@ -8,5 +8,5 @@
 	"bed_model": "creality_cr10se_buildplate_model.stl",
 	"bed_texture": "creality_cr10se_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PETG @Creality;Generic TPU @Creality;Generic ABS @Creality"
+	"default_materials": "Generic PLA @CR-10 SE-all;Generic ABS @CR-10 SE-all;Generic TPU @CR-10 SE-all;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PETG @Creality"
 }
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality CR-10 Smart 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "IyWrvdE9qswlbnaV",
+	"instantiation": "true",
+	"printer_model": "Creality CR-10 Smart",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality CR-10 Smart 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "400",
+	"extruder_clearance_height_to_rod": "33",
+	"extruder_clearance_radius": "70",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z1 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning  \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed  \nM84 X Y E ;Disable all steppers but Z ",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000,5000",
+	"machine_max_acceleration_extruding": "500,500",
+	"machine_max_acceleration_retracting": "500,1000",
+	"machine_max_acceleration_travel": "500,500",
+	"machine_max_acceleration_x": "500,500",
+	"machine_max_acceleration_y": "500,500",
+	"machine_max_acceleration_z": "500,500",
+	"machine_max_jerk_e": "5,5",
+	"machine_max_jerk_x": "10,8",
+	"machine_max_jerk_y": "10,8",
+	"machine_max_jerk_z": "0.4,0.4",
+	"machine_max_speed_e": "50,60",
+	"machine_max_speed_x": "500,500",
+	"machine_max_speed_y": "500,500",
+	"machine_max_speed_z": "10,10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25 ;pause print",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "400",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @CR-10 Smart-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "5",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality CR-10 Smart Pro 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "tlLeGUg0qXJvDgct",
+	"instantiation": "true",
+	"printer_model": "Creality CR-10 Smart Pro",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality CR-10 Smart Pro 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "400",
+	"extruder_clearance_height_to_rod": "33",
+	"extruder_clearance_radius": "70",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "1",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z1 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning  \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed  \nM84 X Y E ;Disable all steppers but Z ",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000,5000",
+	"machine_max_acceleration_extruding": "500,500",
+	"machine_max_acceleration_retracting": "500,1000",
+	"machine_max_acceleration_travel": "500,500",
+	"machine_max_acceleration_x": "500,500",
+	"machine_max_acceleration_y": "500,500",
+	"machine_max_acceleration_z": "500,500",
+	"machine_max_jerk_e": "5,5",
+	"machine_max_jerk_x": "10,8",
+	"machine_max_jerk_y": "10,8",
+	"machine_max_jerk_z": "0.4,0.4",
+	"machine_max_speed_e": "50,60",
+	"machine_max_speed_x": "500,500",
+	"machine_max_speed_y": "500,500",
+	"machine_max_speed_z": "10,10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25 ;pause print",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "400",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Creality"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "40",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-10 Smart Pro",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_10_Smart_Pro",
+	"default_materials": "Generic ABS @CR-10 Smart Pro-all;Generic PLA @Creality"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-10 Smart",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_10_Smart",
+	"default_materials": "Generic PLA @CR-10 Smart-all;Generic ABS @CR-10 Smart-all;Generic PETG @CR-10 Smart-all"
+}
@@ -106,7 +106,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -109,7 +109,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -110,7 +110,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @CR-10-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-10",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_10",
+	"default_materials": "CR-PETG @CR-10-all;CR-TPU @CR-10-all;CR-PLA @CR-10-all;Generic ABS @CR-10-all"
+}
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality CR-10S Pro V2 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "5sLT5epTTbqCr0Cb",
+	"instantiation": "true",
+	"printer_model": "Creality CR-10S Pro V2",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality CR-10S Pro V2 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "400",
+	"extruder_clearance_height_to_rod": "30",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z1 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning  \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed  \nM84 X Y E ;Disable all steppers but Z ",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000,5000",
+	"machine_max_acceleration_extruding": "500,500",
+	"machine_max_acceleration_retracting": "500,1000",
+	"machine_max_acceleration_travel": "500,500",
+	"machine_max_acceleration_x": "500,500",
+	"machine_max_acceleration_y": "500,500",
+	"machine_max_acceleration_z": "500,500",
+	"machine_max_jerk_e": "5,5",
+	"machine_max_jerk_x": "10,8",
+	"machine_max_jerk_y": "10,8",
+	"machine_max_jerk_z": "0.4,0.4",
+	"machine_max_speed_e": "50,60",
+	"machine_max_speed_x": "500,500",
+	"machine_max_speed_y": "500,500",
+	"machine_max_speed_z": "10,10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25 ;pause print",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "400",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @CR-10-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "4",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-10S Pro V2",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_10S_Pro_V2",
+	"default_materials": "Generic PLA @CR-10S Pro V2-all;Generic PETG @CR-10S Pro V2-all;Generic ABS @CR-10S Pro V2-all"
+}
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality CR-20 Pro 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "CQgwdo8OEISIMGmT",
+	"instantiation": "true",
+	"printer_model": "Creality CR-20 Pro",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality CR-20 Pro 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "35",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "500",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-5.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,220x0,220x220,0x220",
+	"printable_height": "250",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @CR-20 Pro-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "5",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-20 Pro",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_k1_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_k1_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_20_Pro",
+	"default_materials": "Generic PETG @CR-20 Pro-all;Generic PLA @CR-20 Pro-all;Generic ABS @CR-20 Pro-all"
+}
@@ -8,7 +8,7 @@
 	"printer_model": "Creality CR-6 SE",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"Generic PLA @CR-6 SE-all"
 	],
 	"printer_variant": "0.2",
 	"default_print_profile": "0.16mm Optimal @Creality CR-6 0.2",
@@ -8,7 +8,7 @@
 	"printer_model": "Creality CR-6 SE",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"Generic PLA @CR-6 SE-all"
 	],
 	"default_print_profile": "0.20mm Standard @Creality CR-6 0.4",
 	"nozzle_diameter": [
@@ -8,7 +8,7 @@
 	"printer_model": "Creality CR-6 SE",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"Generic PLA @CR-6 SE-all"
 	],
 	"printer_variant": "0.6",
 	"default_print_profile": "0.20mm Standard @Creality CR-6 0.6",
@@ -8,7 +8,7 @@
 	"printer_model": "Creality CR-6 SE",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"Generic PLA @CR-6 SE-all"
 	],
 	"printer_variant": "0.8",
 	"default_print_profile": "0.32mm Standard @Creality CR-6 0.8",
@@ -8,5 +8,5 @@
 	"hotend_model": "",
 	"machine_tech": "FFF",
 	"model_id": "Creality_CR_6_SE",
-	"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
+	"default_materials": "Generic PLA @CR-6 SE-all;Generic PETG @CR-6 SE-all;Generic ABS @CR-6 SE-all"
 }
@@ -9,7 +9,7 @@
 	"gcode_flavor": "marlin",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"Generic PLA @CR-M4-all"
 	],
 	"default_print_profile": "0.20mm Standard @Creality CR-M4",
 	"nozzle_diameter": [
@@ -0,0 +1,111 @@
+{
+	"type": "machine",
+	"name": "Creality CR-M4 SE 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "OKCJV8cYk1mclm5H",
+	"instantiation": "true",
+	"printer_model": "Creality CR-M4 SE",
+	"printer_structure": "i3",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "PAUSE",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "86.0",
+	"default_print_profile": "0.20mm Standard @Creality CR-M4 SE 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "420",
+	"extruder_clearance_height_to_rod": "50",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z4.5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "11",
+	"machine_max_acceleration_e": "8000",
+	"machine_max_acceleration_extruding": "8000",
+	"machine_max_acceleration_retracting": "8000",
+	"machine_max_acceleration_travel": "8000",
+	"machine_max_acceleration_x": "8000",
+	"machine_max_acceleration_y": "8000",
+	"machine_max_acceleration_z": "2000",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "100",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "30",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,420x0,420x420,0x420",
+	"printable_height": "420",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96,300x300",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Creality"
+	],
+	"deretraction_speed": "50",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"max_layer_height": "0.36",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "100",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "0.4",
+	"retraction_speed": "50",
+	"wipe": "1",
+	"wipe_distance": "1",
+	"z_hop": "0.4",
+	"z_hop_types": "Slope Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality CR-M4 SE",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_crm4_buildplate_model.stl",
+	"bed_texture": "creality_crm4_buildplate_texture.svg",
+	"default_bed_type": "Cool Plate",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_CR_M4_SE",
+	"default_materials": "Hyper ABS @CR-M4 SE-all;CR-PLA @CR-M4 SE-all;Hyper PLA @CR-M4 SE-all;CR-PETG @CR-M4 SE-all;HP-TPU @CR-M4 SE-all;HP-ASA @CR-M4 SE-all"
+}
@@ -8,5 +8,5 @@
 	"bed_model": "creality_crm4_buildplate_model.stl",
 	"bed_texture": "creality_crm4_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
+	"default_materials": "Generic PLA @CR-M4-all;Generic PETG @CR-M4-all;Generic ABS @CR-M4-all"
 }
@@ -0,0 +1,118 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-2 Pro 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "ttX6bPA2xYsziRP5",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-2 Pro",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"creality_flush_time": "86.0",
+	"default_print_profile": "0.20mm Standard @Creality Ender-2 Pro 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "180",
+	"extruder_clearance_height_to_rod": "35",
+	"extruder_clearance_radius": "55",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "500",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,165x0,165x165,0x165",
+	"printable_height": "180",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @Ender-2 Pro-all"
+	],
+	"deretraction_speed": "25",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "5",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "25",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.2",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-2 Pro",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_k1_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Ender_2_Pro",
+	"default_materials": "Generic TPU @Ender-2 Pro-all;CR-PETG @Ender-2 Pro-all;CR-ABS @Ender-2 Pro-all;CR-PLA @Ender-2 Pro-all"
+}
@@ -112,7 +112,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -112,7 +112,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -112,7 +112,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -112,7 +112,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 Max 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "FJXSUGtl0iKSMMlz",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 Max",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality Ender-3 Max 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "340",
+	"extruder_clearance_height_to_rod": "35",
+	"extruder_clearance_radius": "55",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "500",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-5.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "340",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Ender-3 Max-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "4",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 Max Neo 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "OxVWi5kHu40cFYHk",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 Max Neo",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality Ender-3 Max Neo 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "320",
+	"extruder_clearance_height_to_rod": "35",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "500",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-5.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "320",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Ender-3 Max Neo-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "4",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-3 Max Neo",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"default_bed_type": "Cool Plate",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Ender_3_Max_Neo",
+	"default_materials": "Generic PLA @Ender-3 Max Neo-all;Generic PETG @Ender-3 Max Neo-all;Generic ABS @Ender-3 Max Neo-all"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-3 Max",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"default_bed_type": "Cool Plate",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Ender_3_Max",
+	"default_materials": "Generic PLA @Ender-3 Max-all;Generic PETG @Ender-3 Max-all;Generic ABS @Ender-3 Max-all"
+}
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 Neo 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "kj6ydR2Vq7vxm1eo",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 Neo",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.20mm Standard @Creality Ender-3 Neo 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "33",
+	"extruder_clearance_radius": "65",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z1 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning  \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed  \nM84 X Y E ;Disable all steppers but Z ",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000,5000",
+	"machine_max_acceleration_extruding": "500,500",
+	"machine_max_acceleration_retracting": "500,1000",
+	"machine_max_acceleration_travel": "500,500",
+	"machine_max_acceleration_x": "500,500",
+	"machine_max_acceleration_y": "500,500",
+	"machine_max_acceleration_z": "500,500",
+	"machine_max_jerk_e": "5,5",
+	"machine_max_jerk_x": "10,8",
+	"machine_max_jerk_y": "10,8",
+	"machine_max_jerk_z": "0.4,0.4",
+	"machine_max_speed_e": "50,60",
+	"machine_max_speed_x": "500,500",
+	"machine_max_speed_y": "500,500",
+	"machine_max_speed_z": "10,10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25 ;pause print",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "2.5",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,220x0,220x220,0x220",
+	"printable_height": "250",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "48x48/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Ender-3 Neo-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "5",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "50",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-3 Neo",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_ender3v2neo_buildplate_model.stl",
+	"bed_texture": "creality_ender3v2neo_buildplate_texture.svg",
+	"default_bed_type": "Cool Plate",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Ender_3_Neo",
+	"default_materials": "Generic PETG @Ender-3 Neo-all;Generic ABS @Ender-3 Neo-all;Generic PLA @Ender-3 Neo-all"
+}
@@ -106,7 +106,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -110,7 +110,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1 Plus-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling \nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -110,7 +110,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1 Plus-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -110,7 +110,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1 Plus-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -111,7 +111,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1 Plus-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nM420 S1; Enable mesh leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -109,7 +109,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 S1 Plus-all"
 	],
 	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
 	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
@@ -0,0 +1,118 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 S1 Sonic 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "S7bteie7d5ZpBHTK",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 S1 Sonic",
+	"printer_structure": "i3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"creality_flush_time": "86",
+	"default_print_profile": "0.20mm Standard @Creality Ender-3 S1 Sonic 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "200",
+	"extruder_clearance_height_to_rod": "25",
+	"extruder_clearance_radius": "65",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "3000",
+	"machine_max_acceleration_extruding": "10000",
+	"machine_max_acceleration_retracting": "3000",
+	"machine_max_acceleration_travel": "5000",
+	"machine_max_acceleration_x": "10000",
+	"machine_max_acceleration_y": "10000",
+	"machine_max_acceleration_z": "200",
+	"machine_max_jerk_e": "2.5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "2",
+	"machine_max_speed_e": "80",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "30",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,230x0,230x230,0x230",
+	"printable_height": "270",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Creality"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.32",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "1",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "40",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-3 S1 Sonic",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_ender3s1_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "creality_ender3s1_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sonic_Ender_3_S1",
+	"default_materials": "HP-TPU @Ender-3 S1 Sonic-all;CR-PETG @Ender-3 S1 Sonic-all;CR-ABS @Ender-3 S1 Sonic-all;CR-PLA @Ender-3 S1 Sonic-all;Hyper PLA @Ender-3 S1 Sonic-all"
+}
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Creality Ender-3 V2",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 V2-all"
 	],
 	"default_print_profile": "0.20mm Standard @Creality Ender3V2",
 	"nozzle_diameter": [
@@ -20,7 +20,6 @@
 		"0x220"
 	],
 	"printable_height": "250",
-	"nozzle_type": "undefine",
 	"auxiliary_fan": "0",
 	"machine_max_junction_deviation": [
 		"0.013",
@@ -8,7 +8,7 @@
 	"printer_model": "Creality Ender-3 V2 Neo",
 	"printer_structure": "i3",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Ender-3 V2-all"
 	],
 	"default_print_profile": "0.20mm Standard @Creality Ender3V2 Neo",
 	"nozzle_diameter": [
@@ -8,5 +8,5 @@
 	"bed_model": "creality_ender3v2_buildplate_model.stl",
 	"bed_texture": "creality_ender3v2_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @Creality;Generic PETG @Creality;Generic ABS @Creality"
+	"default_materials": "Generic ABS @Ender-3 V2-all;Generic PLA @Creality;Generic PETG @Creality"
 }
@@ -126,7 +126,7 @@
 	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Generic PLA @Creality Ender-3V3-all"
+		"Generic PLA @Ender-3 V3-all"
 	],
 	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
@@ -126,7 +126,7 @@
 	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Generic PLA @Creality Ender-3V3-all"
+		"Generic PLA @Ender-3 V3-all"
 	],
 	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
@@ -0,0 +1,107 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 V3 0.8 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "3INwhJUXUBs0frv1",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 V3",
+	"printer_structure": "i3",
+	"auxiliary_fan": "1",
+	"bed_exclude_area": "0x0",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"default_print_profile": "0.40mm Standard @Creality Ender-3 V3 0.8 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "140",
+	"extruder_clearance_height_to_rod": "36",
+	"extruder_clearance_radius": "65",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "END_PRINT",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "10000",
+	"machine_max_acceleration_extruding": "20000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "20000",
+	"machine_max_acceleration_y": "20000",
+	"machine_max_acceleration_z": "500",
+	"machine_max_jerk_e": "2.5",
+	"machine_max_jerk_x": "50",
+	"machine_max_jerk_y": "50",
+	"machine_max_jerk_z": "2",
+	"machine_max_speed_e": "100",
+	"machine_max_speed_x": "600",
+	"machine_max_speed_y": "600",
+	"machine_max_speed_z": "500",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE\n",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer]",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"preferred_orientation": "0",
+	"print_host": "http://172.23.209.71:4408/",
+	"print_host_webui": "http://172.23.209.71:4408/",
+	"printable_area": "0x0,220x0,220x220,0x220",
+	"printable_height": "250",
+	"printer_technology": "FFF",
+	"printer_variant": "0.8",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96,300x300",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Ender-3 V3-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#018001",
+	"extruder_offset": "0x0",
+	"max_layer_height": "0.56",
+	"min_layer_height": "0.16",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "1",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "0",
+	"retraction_length": "1.5",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "40",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -123,7 +123,7 @@
 	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Generic PLA @Creality Ender-3V3-all"
+		"Generic PLA @Ender-3 V3 Plus-all"
 	],
 	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
@@ -123,7 +123,7 @@
 	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
-		"Generic PLA @Creality Ender-3V3-all"
+		"Generic PLA @Ender-3 V3 Plus-all"
 	],
 	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
@@ -0,0 +1,108 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-3 V3 Plus 0.8 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "POEqDPvODxBUiA6S",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-3 V3 Plus",
+	"printer_structure": "i3",
+	"auxiliary_fan": "1",
+	"bed_exclude_area": "0x0",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "PAUSE",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"default_print_profile": "0.40mm Standard @Creality Ender-3 V3 Plus 0.8 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "1",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "330",
+	"extruder_clearance_height_to_rod": "60",
+	"extruder_clearance_radius": "50",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "END_PRINT",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "10000",
+	"machine_max_acceleration_extruding": "20000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "20000",
+	"machine_max_acceleration_y": "20000",
+	"machine_max_acceleration_z": "500",
+	"machine_max_jerk_e": "2.5",
+	"machine_max_jerk_x": "50",
+	"machine_max_jerk_y": "50",
+	"machine_max_jerk_z": "2",
+	"machine_max_speed_e": "100",
+	"machine_max_speed_x": "600",
+	"machine_max_speed_y": "600",
+	"machine_max_speed_z": "500",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE\n",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer]",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"preferred_orientation": "0",
+	"print_host": "http://172.23.209.71:4408/",
+	"print_host_webui": "http://172.23.209.71:4408/",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "330",
+	"printer_technology": "FFF",
+	"printer_variant": "0.8",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "1",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96,300x300",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Ender-3 V3 Plus-all"
+	],
+	"deretraction_speed": "30",
+	"extruder_colour": "#018001",
+	"extruder_offset": "0x0",
+	"max_layer_height": "0.64",
+	"min_layer_height": "0.2",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "1",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "30",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Creality Ender-3 V3 Plus",
 	"model_id": "Creality-Ender3-V3-Plus",
-	"nozzle_diameter": "0.4;0.6",
+	"nozzle_diameter": "0.4;0.6;0.8",
 	"machine_tech": "FFF",
 	"family": "Creality",
 	"bed_model": "creality_ender3v3plus_buildplate_model.stl",
 	"bed_texture": "creality_ender3v3plus_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
+	"default_materials": "Generic PLA @Ender-3 V3 Plus-all;Generic PETG @Ender-3 V3 Plus-all;Generic TPU @Ender-3 V3 Plus-all;Generic ABS @Ender-3 V3 Plus-all;Generic ASA @Ender-3 V3 Plus-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all"
 }
@@ -8,5 +8,5 @@
 	"bed_model": "creality_ender3v3se_buildplate_model.stl",
 	"bed_texture": "creality_ender3v3se_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
+	"default_materials": "Generic PETG @Ender-3 V3 SE-all;Generic TPU @Ender-3 V3 SE-all;Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all"
 }
@@ -2,11 +2,11 @@
 	"type": "machine_model",
 	"name": "Creality Ender-3 V3",
 	"model_id": "Creality-Ender3-V3",
-	"nozzle_diameter": "0.4;0.6",
+	"nozzle_diameter": "0.4;0.6;0.8",
 	"machine_tech": "FFF",
 	"family": "Creality",
 	"bed_model": "creality_ender3v3_buildplate_model.stl",
 	"bed_texture": "creality_ender3v3_buildplate_texture.svg",
 	"hotend_model": "",
-	"default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all"
+	"default_materials": "Generic PLA @Ender-3 V3-all;Generic PETG @Ender-3 V3-all;Generic TPU @Ender-3 V3-all;Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all"
 }
@@ -0,0 +1,117 @@
+{
+	"type": "machine",
+	"name": "Creality Ender-5 S1 Sonic 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "JbNM2XbaoJVkIEIV",
+	"instantiation": "true",
+	"printer_model": "Creality Ender-5 S1 Sonic",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"cooling_tube_length": "5",
+	"cooling_tube_retraction": "91.5",
+	"creality_flush_time": "86",
+	"default_print_profile": "0.20mm Standard @Creality Ender-5 S1 Sonic 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "-2",
+	"extruder_clearance_height_to_lid": "34",
+	"extruder_clearance_height_to_rod": "55",
+	"extruder_clearance_radius": "62.5",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "2000",
+	"machine_max_acceleration_extruding": "2500",
+	"machine_max_acceleration_retracting": "1000",
+	"machine_max_acceleration_travel": "2000",
+	"machine_max_acceleration_x": "2500",
+	"machine_max_acceleration_y": "2500",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "12",
+	"machine_max_jerk_y": "12",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "100",
+	"machine_max_speed_x": "250",
+	"machine_max_speed_y": "250",
+	"machine_max_speed_z": "30",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "0",
+	"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "92",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,220x0,220x220,0x220",
+	"printable_height": "280",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @Ender-5 S1 Sonic-all"
+	],
+	"deretraction_speed": "30",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.32",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "0",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "30",
+	"travel_slope": "1",
+	"wipe": "1",
+	"wipe_distance": "1",
+	"z_hop": "0.4",
+	"z_hop_types": "Slope Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Ender-5 S1 Sonic",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_ender5s1_buildplate_model.stl",
+	"default_bed_type": "Textured PEI Plate",
+	"bed_texture": "creality_ender5s1_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sonic_Ender_5_S1",
+	"default_materials": "HP-ASA @Ender-5 S1 Sonic-all;HP-TPU @Ender-5 S1 Sonic-all;CR-PETG @Ender-5 S1 Sonic-all;CR-ABS @Ender-5 S1 Sonic-all;CR-PLA @Ender-5 S1 Sonic-all;Hyper PLA @Ender-5 S1 Sonic-all"
+}
@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon D3 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "59RabiPsByZ8SN4V",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon D3",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "119",
+	"default_print_profile": "0.20mm Standard @Creality Sermoon D3 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "100",
+	"extruder_clearance_height_to_rod": "50",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_LED_light_exist": "1",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "500",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "500",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "1",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x250,0x250",
+	"printable_height": "300",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @Sermoon D3-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "299",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "40",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,118 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon D3 Pro 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "9JdpKeb70NBMQqK4",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon D3 Pro",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": ";switch//////////////////////////////////////////\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\nG1 F800 E-[new_retract_length]\nG1 F21000\n;P0 S1 L2 D0\nT[next_extruder]\nM109 S[new_filament_temp]\n;T0 S1 L0 D0\n;switch//////////////////////////////////////////\n",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"default_print_profile": "0.20mm Standard @Creality Sermoon D3 Pro 0.4 nozzle",
+	"disable_m73": "1",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_LED_light_exist": "1",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\n;G1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "5000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "3000",
+	"machine_max_acceleration_y": "3000",
+	"machine_max_acceleration_z": "100",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "1",
+	"machine_ptc_exist": "1",
+	"machine_start_gcode": "M900 T0 K0.03\nM900 T1 K0.05\nM593 X F35\nM593 Y F37.5\nM205 B20000.00 S0.00 T0.00 J0.05\nG21\nG90\nM83\nM107\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer] T[initial_no_support_extruder]\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printable_area": "0x0,290x0,290x220,0x220",
+	"printable_height": "300",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "0",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @Sermoon D3-all"
+	],
+	"deretraction_speed": "40,40",
+	"extruder_colour": "#FCE94F,#FCE94F",
+	"extruder_offset": "0x0,0x0",
+	"long_retractions_when_cut": "0,0",
+	"max_layer_height": "0.3,0.3",
+	"min_layer_height": "0.08,0.08",
+	"nozzle_diameter": [
+		"0.4,0.4"
+	],
+	"retract_before_wipe": "90%,90%",
+	"retract_length_toolchange": "10,10",
+	"retract_lift_above": "0,0",
+	"retract_lift_below": "0,0",
+	"retract_lift_enforce": "All Surfaces,All Surfaces",
+	"retract_restart_extra": "0,0",
+	"retract_restart_extra_toolchange": "0,0",
+	"retract_when_changing_layer": "1,1",
+	"retraction_distances_when_cut": "18,18",
+	"retraction_length": "0.8,0.8",
+	"retraction_minimum_travel": "2,2",
+	"retraction_speed": "40,40",
+	"travel_slope": "1,1",
+	"wipe": "1,1",
+	"wipe_distance": "2,2",
+	"z_hop": "0.4,0.4",
+	"z_hop_types": "Slope Lift,Slope Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Sermoon D3 Pro",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "High Temp Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sermoon_D3_Pro",
+	"default_materials": "Hyper PLA-CF @Sermoon D3 Pro-all;CR-PETG @Sermoon D3 Pro-all;Hyper PLA @Sermoon D3 Pro-all;CR-ABS @Sermoon D3 Pro-all"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Sermoon D3",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "High Temp Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sermoon_D3",
+	"default_materials": "CR-Silk @Sermoon D3-all;CR-PLA @Sermoon D3-all;CR-TPU @Sermoon D3-all;CR-PETG @Sermoon D3-all;Hyper PLA @Sermoon D3-all;Generic ABS @Sermoon D3-all"
+}
@@ -0,0 +1,113 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon M300 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "HOFVUEhkatFtDeUd",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon M300",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "128",
+	"default_print_profile": "0.20mm Standard @Creality Sermoon M300 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "2",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "118",
+	"extruder_clearance_height_to_rod": "24",
+	"extruder_clearance_radius": "64",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "END_PRINT",
+	"machine_load_filament_time": "128",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "20000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "20000",
+	"machine_max_acceleration_y": "20000",
+	"machine_max_acceleration_z": "300",
+	"machine_max_jerk_e": "10",
+	"machine_max_jerk_x": "100",
+	"machine_max_jerk_y": "100",
+	"machine_max_jerk_z": "5",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "800",
+	"machine_max_speed_y": "800",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "1",
+	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "183",
+	"parking_pos_retraction": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "200",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96,300x300",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Sermoon M300-all"
+	],
+	"deretraction_speed": "40",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "1",
+	"max_layer_height": "0.35",
+	"min_layer_height": "0.1",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "70",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "199",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "30",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "1",
+	"retraction_speed": "40",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Auto Lift"
+}
@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon M300 0.6 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "IVoSH2oMNLuH2D1s",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon M300",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "128",
+	"default_print_profile": "0.30mm Standard @Creality Sermoon M300 0.6 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "118",
+	"extruder_clearance_height_to_rod": "24",
+	"extruder_clearance_radius": "64",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "END_PRINT",
+	"machine_load_filament_time": "128",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "20000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "20000",
+	"machine_max_acceleration_y": "20000",
+	"machine_max_acceleration_z": "300",
+	"machine_max_jerk_e": "10",
+	"machine_max_jerk_x": "100",
+	"machine_max_jerk_y": "100",
+	"machine_max_jerk_z": "5",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "800",
+	"machine_max_speed_y": "800",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "1",
+	"machine_ptc_exist": "0",
+	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "183",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "200",
+	"printer_technology": "FFF",
+	"printer_variant": "0.6",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Sermoon M300-all"
+	],
+	"deretraction_speed": "30",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.42",
+	"min_layer_height": "0.12",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "199",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "1.5",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "30",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Slope Lift"
+}
@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon M300 0.8 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "JFD4mtUYcImChJkw",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon M300",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "128",
+	"default_print_profile": "0.40mm Standard @Creality Sermoon M300 0.8 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "118",
+	"extruder_clearance_height_to_rod": "24",
+	"extruder_clearance_radius": "64",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "klipper",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"machine_LED_light_exist": "0",
+	"machine_end_gcode": "END_PRINT",
+	"machine_load_filament_time": "128",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "20000",
+	"machine_max_acceleration_retracting": "5000",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "20000",
+	"machine_max_acceleration_y": "20000",
+	"machine_max_acceleration_z": "300",
+	"machine_max_jerk_e": "10",
+	"machine_max_jerk_x": "100",
+	"machine_max_jerk_y": "100",
+	"machine_max_jerk_z": "5",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "800",
+	"machine_max_speed_y": "800",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "PAUSE",
+	"machine_platform_motion_enable": "1",
+	"machine_ptc_exist": "0",
+	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "hardened_steel",
+	"nozzle_volume": "183",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,300x0,300x300,0x300",
+	"printable_height": "200",
+	"printer_technology": "FFF",
+	"printer_variant": "0.8",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"Generic PLA @Sermoon M300-all"
+	],
+	"deretraction_speed": "30",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.56",
+	"min_layer_height": "0.16",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "199",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "2",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "30",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Slope Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Sermoon M300",
+	"nozzle_diameter": "0.8;0.6;0.4",
+	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"default_bed_type": "Textured PEI Plate",
+	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sermoon_M300",
+	"default_materials": "Generic ASA @Sermoon M300-all;Generic ABS @Sermoon M300-all;Hyper PLA-CF @Sermoon M300-all;Hyper PETG @Sermoon M300-all;Hyper ABS @Sermoon M300-all;Generic PLA-Silk @Sermoon M300-all;Generic PLA @Sermoon M300-all;Generic PETG @Sermoon M300-all;CR-Silk @Sermoon M300-all;CR-PETG @Sermoon M300-all;CR-ABS @Sermoon M300-all;CR-PLA @Sermoon M300-all;Hyper PLA @Sermoon M300-all"
+}
@@ -7,7 +7,7 @@
 	"instantiation": "true",
 	"printer_model": "Creality Sermoon V1",
 	"default_filament_profile": [
-		"Generic PLA @Creality"
+		"CR-PLA @Sermoon V1 Pro-all"
 	],
 	"default_print_profile": "0.20mm Standard @Creality Sermoon V1",
 	"nozzle_diameter": [
@@ -0,0 +1,119 @@
+{
+	"type": "machine",
+	"name": "Creality Sermoon V1 Pro 0.4 nozzle",
+	"inherits": "fdm_creality_common",
+	"from": "system",
+	"setting_id": "s7iFo8yEpyRUvd5w",
+	"instantiation": "true",
+	"printer_model": "Creality Sermoon V1 Pro",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_exclude_area": "0x0",
+	"bed_mesh_max": "99999,99999",
+	"bed_mesh_min": "-99999,-99999",
+	"bed_mesh_probe_distance": "50,50",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+	"best_object_pos": "0.5,0.5",
+	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"creality_flush_time": "119",
+	"default_print_profile": "0.20mm Standard @Creality Sermoon V1 Pro 0.4 nozzle",
+	"disable_m73": "0",
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "100",
+	"extruder_clearance_height_to_rod": "50",
+	"extruder_clearance_radius": "60",
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"gcode_flavor": "marlin",
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_LED_light_exist": "1",
+	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_load_filament_time": "0",
+	"machine_max_acceleration_e": "5000",
+	"machine_max_acceleration_extruding": "500",
+	"machine_max_acceleration_retracting": "500",
+	"machine_max_acceleration_travel": "20000",
+	"machine_max_acceleration_x": "500",
+	"machine_max_acceleration_y": "500",
+	"machine_max_acceleration_z": "500",
+	"machine_max_jerk_e": "5",
+	"machine_max_jerk_x": "10",
+	"machine_max_jerk_y": "10",
+	"machine_max_jerk_z": "0.4",
+	"machine_max_speed_e": "50",
+	"machine_max_speed_x": "500",
+	"machine_max_speed_y": "500",
+	"machine_max_speed_z": "10",
+	"machine_min_extruding_rate": "0,0",
+	"machine_min_travel_rate": "0,0",
+	"machine_pause_gcode": "M25",
+	"machine_platform_motion_enable": "1",
+	"machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "0",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"prime_tower_position_type": "Middle Upper",
+	"printable_area": "0x0,175x0,175x175,0x175",
+	"printable_height": "165",
+	"printer_technology": "FFF",
+	"printer_variant": "0.4",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"purge_in_prime_tower": "0",
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"thumbnails": "96x96/PNG, 300x300/PNG",
+	"thumbnails_format": "PNG",
+	"time_cost": "0",
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"z_offset": "0",
+	"default_filament_profile": [
+		"CR-PLA @Sermoon V1 Pro-all"
+	],
+	"deretraction_speed": "30",
+	"extruder_colour": "#FCE94F",
+	"extruder_offset": "0x0",
+	"long_retractions_when_cut": "0",
+	"max_layer_height": "0.2",
+	"min_layer_height": "0.08",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"retract_before_wipe": "90%",
+	"retract_length_toolchange": "0",
+	"retract_lift_above": "0",
+	"retract_lift_below": "164",
+	"retract_lift_enforce": "All Surfaces",
+	"retract_restart_extra": "0",
+	"retract_restart_extra_toolchange": "0",
+	"retract_when_changing_layer": "1",
+	"retraction_distances_when_cut": "18",
+	"retraction_length": "0.8",
+	"retraction_minimum_travel": "2",
+	"retraction_speed": "30",
+	"travel_slope": "3",
+	"wipe": "1",
+	"wipe_distance": "2",
+	"z_hop": "0.4",
+	"z_hop_types": "Normal Lift"
+}
@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Creality Sermoon V1 Pro",
+	"nozzle_diameter": "0.4",
+	"bed_model": "creality_k1_buildplate_model.stl",
+	"default_bed_type": "Cool Plate",
+	"bed_texture": "",
+	"family": "Creality",
+	"hotend_model": "",
+	"machine_tech": "FFF",
+	"model_id": "Creality_Sermoon_V1_Pro",
+	"default_materials": "CR-TPU @Sermoon V1 Pro-all;CR-PETG @Sermoon V1 Pro-all;Generic ABS @Sermoon V1 Pro-all;CR-PLA @Sermoon V1 Pro-all;Hyper PLA @Sermoon V1 Pro-all"
+}