juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-16 10:02:12 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix casing of axis' names (#11258)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2025-11-08 11:36:03 -03:00
committed by GitHub
parent b62187f076
commit 2bcbb688a1
25 changed files with 522 additions and 682 deletions
Download Patch File Download Diff File Expand all files Collapse all files

23
src/libslic3r/PrintConfig.cpp
View File

@@ -1964,7 +1964,7 @@ void PrintConfigDef::init_fff_params()
"then the external perimeter and, finally, the first internal perimeter. "
"This option is recommended against the Outer/Inner option in most cases.\n\n"
"Use Outer/Inner for the same external wall quality and dimensional accuracy benefits of Inner/Outer/Inner option. "
"However, the z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.\n\n ");
"However, the Z seams will appear less consistent as the first extrusion of a new layer starts on a visible surface.");
def->enum_keys_map = &ConfigOptionEnum<WallSequence>::get_enum_values();
def->enum_values.push_back("inner wall/outer wall");
def->enum_values.push_back("outer wall/inner wall");
@@ -2438,10 +2438,9 @@ void PrintConfigDef::init_fff_params()
def = this->add("filament_shrink", coPercents);
def->label = L("Shrinkage (XY)");
// xgettext:no-c-format, no-boost-format
def->tooltip = L("Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm)."
" The part will be scaled in xy to compensate."
" Only the filament used for the perimeter is taken into account."
"\nBe sure to allow enough space between objects, as this compensation is done after the checks.");
def->tooltip = L("Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). "
"The part will be scaled in XY to compensate. Only the filament used for the perimeter is taken into account.\n"
"Be sure to allow enough space between objects, as this compensation is done after the checks.");
def->sidetext = "%";
def->ratio_over = "";
def->min = 50;
@@ -3285,7 +3284,7 @@ void PrintConfigDef::init_fff_params()
// BBS
def = this->add("precise_z_height", coBool);
def->label = L("Precise Z height");
def->tooltip = L("Enable this to get precise z height of object after slicing. "
def->tooltip = L("Enable this to get precise Z height of object after slicing. "
"It will get the precise object height by fine-tuning the layer heights of the last few layers. "
"Note that this is an experimental parameter.");
def->mode = comAdvanced;
@@ -5164,7 +5163,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("spiral_mode", coBool);
def->label = L("Spiral vase");
def->tooltip = L("Spiralize smooths out the z moves of the outer contour. "
def->tooltip = L("Spiralize smooths out the Z moves of the outer contour. "
"And turns a solid model into a single walled print with solid bottom layers. "
"The final generated model has no seam.");
def->mode = comSimple;
@@ -5379,7 +5378,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionEnum<SupportType>(stNormalAuto));
def = this->add("support_object_xy_distance", coFloat);
def->label = L("Support/object xy distance");
def->label = L("Support/object XY distance");
def->category = L("Support");
def->tooltip = L("XY separation between an object and its support.");
def->sidetext = "mm"; // milimeters, don't need translation
@@ -5679,7 +5678,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("independent_support_layer_height", coBool);
def->label = L("Independent support layer height");
def->category = L("Support");
def->tooltip = L("Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time. "
def->tooltip = L("Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. "
"This option will be invalid when the prime tower is enabled.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(true));
@@ -10128,7 +10127,7 @@ ObjectsInfoConfigDef::ObjectsInfoConfigDef()
def->label = L("Scale per object");
def->tooltip = L("Contains a string with the information about what scaling was applied to the individual objects. "
"Indexing of the objects is zero-based (first object has index 0).\n"
"Example: 'x:100% y:50% z:100'.");
"Example: 'x:100% y:50% z:100%'.");
def = this->add("input_filename_base", coString);
def->label = L("Input filename without extension");
@@ -10142,8 +10141,8 @@ DimensionsConfigDef::DimensionsConfigDef()
{
ConfigOptionDef* def;
const std::string point_tooltip = L("The vector has two elements: x and y coordinate of the point. Values in mm.");
const std::string bb_size_tooltip = L("The vector has two elements: x and y dimension of the bounding box. Values in mm.");
const std::string point_tooltip = L("The vector has two elements: X and Y coordinate of the point. Values in mm.");
const std::string bb_size_tooltip = L("The vector has two elements: X and Y dimension of the bounding box. Values in mm.");
def = this->add("first_layer_print_convex_hull", coPoints);
def->label = L("First layer convex hull");