post changes after merging BS1.7.4

Remove tracking etc..

resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json

@@ -1,15 +1,12 @@
 {
 	"type": "machine",
-	"setting_id": "GM_Anycubic_002",
+	"setting_id": "GM001",
 	"name": "Anycubic Chiron 0.4 nozzle",
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_machine_common",
 	"printer_model": "Anycubic Chiron",
 	"default_print_profile": "0.20mm Standard @Anycubic Chiron",
-	"extruder_type": [
-		"Bowden"
-	],
 	"nozzle_diameter": [
 		"0.4"
 	],
@@ -111,7 +108,7 @@
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M601",
 	"default_filament_profile": [
-		"Generic PLA @Anycubic"
+		"Anycubic Generic PLA"
 	],
 	"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107       ;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single]; set wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z15.0 F3600 ;move the platform down 15mm\nG92 E0;zero the extruded length\nG1 F200 E40;extrude 40mm of feed stock\nG92 E0;zero the extruded length again\nG1 F3600",
 	"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0  ;heated bed heater off (if you have it)\nG91;relative positioning\nG1 E-4 F300;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X-10 F3000; get the head off the bed\nG1 F3000 Y400;kick the bed out\nM84;steppers off",