mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Prusa CORE One Profiles (#9352)
* update profiles from3b3aa19543* capitalize SPEED * Capitalize SPEED * sync withcac592a462 (diff-b2ec55404a83d29c6c998171282a456702f47a98bade1a24aa583ea65c4314e0)* sync with1d5331b7d9there was an issue with the filament start gcode conversion that appears to make the gcode invalid * tweak Prusa CORE One --------- Co-authored-by: Noisyfox <timemanager.rick@gmail.com> Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Brandon Wees
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.6",
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.8",
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusa Generic ABS @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_abs",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ABS @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.6",
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.8",
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusa Generic ASA @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_asa",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic ASA @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"17"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One 0.8",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.5",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"31"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"37"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,111 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"35"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusa Generic PETG @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"5"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"85"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_pet",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PETG @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One 0.6",
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"19"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One 0.8",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"17"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One HF 0.4",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One HF 0.5",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"11"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One HF 0.6",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"19"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,102 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA Silk @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA Silk @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA Silk @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA Silk @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic PLA Silk @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA Silk @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"17"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusa Generic PLA Silk @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic PLA Silk @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic TPU @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic TPU @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic TPU @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusa Generic TPU @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.5"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusa Generic TPU @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic TPU @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,113 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_id": "Prusa Generic TPU @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"FLEX"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_flex",
|
||||
"instantiation": "true",
|
||||
"name": "Prusa Generic TPU @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One 0.6",
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One 0.8",
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One HF 0.4",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One HF 0.5",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One HF 0.6",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament ASA @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_asa",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament ASA @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"18"
|
||||
],
|
||||
"filament_id": "Prusament PA-CF @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PA-CF @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PA-CF @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"filament_id": "Prusament PA-CF @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PA-CF @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PA-CF @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,98 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"124.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.11"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_id": "Prusament PA-CF @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_pa",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PA-CF @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One HF 0.4",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One HF 0.5",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One HF 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC Blend @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One HF 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,96 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"51.53"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament PC Blend @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_pc",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC Blend @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"18"
|
||||
],
|
||||
"filament_id": "Prusament PC-CF @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"13"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC-CF @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC-CF @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"filament_id": "Prusament PC-CF @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PC-CF @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC-CF @CORE One 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,98 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"74.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_id": "Prusament PC-CF @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S45 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"from": "system",
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_pc",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PC-CF @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"285"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"17"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One 0.8",
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One HF 0.4",
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One HF 0.5",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"31"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One HF 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"37"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PETG @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
111
resources/profiles/Prusa/filament/Prusament PETG @CORE One.json
Normal file
111
resources/profiles/Prusa/filament/Prusament PETG @CORE One.json
Normal file
@@ -0,0 +1,111 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"35"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament PETG @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"5"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"85"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"85"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"inherits": "fdm_filament_pet",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PETG @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15.5"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One 0.6",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"19"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"17"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One HF 0.4",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One HF 0.4",
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One HF 0.5",
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One HF 0.5",
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"11"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One HF 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One HF 0.6",
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One HF 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"37"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.026{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One HF 0.8",
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"19"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
102
resources/profiles/Prusa/filament/Prusament PLA @CORE One.json
Normal file
102
resources/profiles/Prusa/filament/Prusament PLA @CORE One.json
Normal file
@@ -0,0 +1,102 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament PLA @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PLA @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,22 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PVB @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15.5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PVB @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PVB @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament PVB @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"19"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament PVB @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PVB @CORE One 0.8",
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"17"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
104
resources/profiles/Prusa/filament/Prusament PVB @CORE One.json
Normal file
104
resources/profiles/Prusa/filament/Prusament PVB @CORE One.json
Normal file
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"49.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.09"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament PVB @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PVB"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_pvb",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament PVB @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle",
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament rPLA @CORE One 0.6",
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament rPLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament rPLA @CORE One 0.6",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
{
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle",
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"filament_id": "Prusament rPLA @CORE One 0.8",
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"from": "system",
|
||||
"inherits": "Prusament rPLA @CORE One",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament rPLA @CORE One 0.8",
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"17"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
104
resources/profiles/Prusa/filament/Prusament rPLA @CORE One.json
Normal file
104
resources/profiles/Prusa/filament/Prusament rPLA @CORE One.json
Normal file
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"chamber_temperature": [
|
||||
"20"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle",
|
||||
"Prusa CORE One HF 0.4 nozzle",
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"85"
|
||||
],
|
||||
"filament_cost": [
|
||||
"37.49"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_id": "Prusament rPLA @CORE One",
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"from": "system",
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"150"
|
||||
],
|
||||
"inherits": "fdm_filament_pla",
|
||||
"instantiation": "true",
|
||||
"name": "Prusament rPLA @CORE One",
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"205"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"setting_id": "GFSA04",
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"type": "filament"
|
||||
}
|
||||
Reference in New Issue
Block a user