Fix "..." at the end of "Replace with STL" menus (#11247)

localization/i18n/OrcaSlicer.pot

@@ -1949,13 +1949,13 @@ msgstr ""
 msgid "Replace with STL"
 msgstr ""
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr ""
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3564,7 +3564,7 @@ msgstr ""
 msgid "Circular"
 msgstr ""
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr ""
 
 msgid "Settings"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -2039,13 +2039,13 @@ msgstr "Tornar a carregar les parts seleccionades des del disc"
 msgid "Replace with STL"
 msgstr "Substitueix per STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Substituir la peça seleccionada per un nou STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3783,8 +3783,8 @@ msgstr "Rectangular"
 msgid "Circular"
 msgstr "Circular"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Carregar forma des de l'STL..."
+msgstr "Carregar forma des de l'STL ..."
 
 msgid "Settings"
 msgstr "Configuració"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -2020,13 +2020,13 @@ msgstr "Znovu načíst vybrané části z disku"
 msgid "Replace with STL"
 msgstr "Nahradit STL souborem"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Nahradit vybranou část novým STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3735,8 +3735,8 @@ msgstr "Obdélníkový"
 msgid "Circular"
 msgstr "Kruhový"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Načíst tvar ze souboru STL…"
+msgstr "Načíst tvar ze souboru STL …"
 
 msgid "Settings"
 msgstr "Nastavení"

localization/i18n/de/OrcaSlicer_de.po

@@ -2062,13 +2062,13 @@ msgstr "Die ausgewählten Teile von der Festplatte neu laden"
 msgid "Replace with STL"
 msgstr "Durch STL Datei austauschen"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Ausgewähltes Teil durch eine neue STL ersetzen."
 
 msgid "Replace all with STL"
 msgstr "Alle durch STL Dateien austauschen"
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr "Ausgewählte Teile durch neue STL aus Ordner ersetzen."
 
 msgid "Change filament"
@@ -3892,8 +3892,8 @@ msgstr "Rechteckig"
 msgid "Circular"
 msgstr "Kreisförmig"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Lade Form von STL..."
+msgstr "Lade Form von STL ..."
 
 msgid "Settings"
 msgstr "Einstellungen"

localization/i18n/en/OrcaSlicer_en.po

@@ -1949,13 +1949,13 @@ msgstr ""
 msgid "Replace with STL"
 msgstr ""
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr ""
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3595,7 +3595,7 @@ msgstr ""
 msgid "Circular"
 msgstr ""
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr ""
 
 msgid "Settings"

localization/i18n/es/OrcaSlicer_es.po

@@ -2044,13 +2044,13 @@ msgstr "Recargar las piezas seleccionadas desde el disco"
 msgid "Replace with STL"
 msgstr "Reemplazar con STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Reemplaza la pieza seleccionada con un nuevo STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3799,8 +3799,8 @@ msgstr "Rectangular"
 msgid "Circular"
 msgstr "Circular"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Cargar forma desde STL..."
+msgstr "Cargar forma desde STL ..."
 
 msgid "Settings"
 msgstr "Ajustes"

localization/i18n/fr/OrcaSlicer_fr.po

@@ -2058,13 +2058,13 @@ msgstr "Recharger les pièces sélectionnées à partir du disque"
 msgid "Replace with STL"
 msgstr "Remplacer par le STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Remplacer la pièce sélectionnée par un nouveau STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3813,8 +3813,8 @@ msgstr "Rectangle"
 msgid "Circular"
 msgstr "Circulaire"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Charger une forme depuis un STL…"
+msgstr "Charger une forme depuis un STL …"
 
 msgid "Settings"
 msgstr "Réglages"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -1967,13 +1967,13 @@ msgstr "A kiválasztott tárgyak újratöltése a lemezről"
 msgid "Replace with STL"
 msgstr "Lecserélés STL-lel"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Lecseréli a kijelölt tárgyat egy új STL-lel"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3676,7 +3676,7 @@ msgstr "Téglalap"
 msgid "Circular"
 msgstr "Kör"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "Forma betöltése STL-ből..."
 
 msgid "Settings"

localization/i18n/it/OrcaSlicer_it.po

@@ -2049,13 +2049,13 @@ msgstr "Ricarica le parti selezionate da disco"
 msgid "Replace with STL"
 msgstr "Sostituisci con STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Sostituisci la parte selezionata con un nuovo STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3809,8 +3809,8 @@ msgstr "Rettangolare"
 msgid "Circular"
 msgstr "Circolare"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Carica forma da STL..."
+msgstr "Carica forma da STL ..."
 
 msgid "Settings"
 msgstr "Impostazioni"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -1978,13 +1978,13 @@ msgstr "選択したパーツをディスクから再読込み"
 msgid "Replace with STL"
 msgstr "STLに置き換え"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "選択したパーツを新しいSTLに置換え"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3634,7 +3634,7 @@ msgstr "長方形"
 msgid "Circular"
 msgstr "円形"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "STLからシェープデータを読込む"
 
 msgid "Settings"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -2006,13 +2006,13 @@ msgstr "선택한 부품을 디스크에서 다시 불러오기"
 msgid "Replace with STL"
 msgstr "STL 파일로 교체"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "선택한 부품을 새 STL 파일로 교체"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3697,7 +3697,7 @@ msgstr "직사각형"
 msgid "Circular"
 msgstr "원형"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "STL에서 모양 불러오기..."
 
 msgid "Settings"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -2031,13 +2031,13 @@ msgstr "Iš naujo įkelti pasirinktas dalis iš disko"
 msgid "Replace with STL"
 msgstr "Pakeisti STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Pakeisti pasirinktą dalį į naują STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3772,8 +3772,8 @@ msgstr "Stačiakampis"
 msgid "Circular"
 msgstr "Apvalus"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Įkelti formą iš STL..."
+msgstr "Įkelti formą iš STL ..."
 
 msgid "Settings"
 msgstr "Nustatymai"

localization/i18n/nl/OrcaSlicer_nl.po

@@ -1990,13 +1990,13 @@ msgstr "Laad de geselecteerde onderdelen opnieuw vanaf de schijf"
 msgid "Replace with STL"
 msgstr "Vervangen door STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Vervang het geselecteerde onderdeel door een nieuwe STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3711,7 +3711,7 @@ msgstr "Rechthoekig"
 msgid "Circular"
 msgstr "Rond"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "Vorm laden vanuit het stl. bestand..."
 
 msgid "Settings"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -2028,13 +2028,13 @@ msgstr "Przeładuj wybrane części z dysku"
 msgid "Replace with STL"
 msgstr "Zamień na STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Zamień wybraną część na nowy plik STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3777,8 +3777,8 @@ msgstr "Prostokątny"
 msgid "Circular"
 msgstr "Okrągły"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Wczytaj kształt z pliku STL..."
+msgstr "Wczytaj kształt z pliku STL ..."
 
 msgid "Settings"
 msgstr "Ustawienia"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -2035,14 +2035,14 @@ msgstr "Recarregar as peças selecionadas do disco"
 msgid "Replace with STL"
 msgstr "Substituir por STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
-msgstr "Substituir a peça selecionada por novo STL"
+msgstr "Substituir a peça selecionada por novo STL."
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
-msgstr ""
+msgstr "Substituir todas peças selecionadas com STL da pasta."
 
 msgid "Change filament"
 msgstr "Alterar filamento"
@@ -3778,8 +3778,8 @@ msgstr "Retangular"
 msgid "Circular"
 msgstr "Circular"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Carregar forma de STL…"
+msgstr "Carregar forma de STL …"
 
 msgid "Settings"
 msgstr "Configurações"

localization/i18n/ru/OrcaSlicer_ru.po

@@ -2037,13 +2037,13 @@ msgstr "Перезагрузить выбранные модели с диска
 msgid "Replace with STL"
 msgstr "Заменить на другую модель"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Заменить выбранную модель другой"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3805,7 +3805,7 @@ msgstr "Прямоугольная"
 msgid "Circular"
 msgstr "Круглая"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "Загрузка формы стола из STL файла..."
 
 msgid "Settings"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -1963,13 +1963,13 @@ msgstr "Ladda om de valda delarna från disken"
 msgid "Replace with STL"
 msgstr "Ersätt med STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Ersätt den valda delen med ny STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3674,8 +3674,8 @@ msgstr "Rektangulär"
 msgid "Circular"
 msgstr "Cirkulär"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Ladda form ifrån STL..."
+msgstr "Ladda form ifrån STL ..."
 
 msgid "Settings"
 msgstr "Inställningar"

localization/i18n/tr/OrcaSlicer_tr.po

@@ -2021,13 +2021,13 @@ msgstr "Seçilen parçaları diskten yeniden yükle"
 msgid "Replace with STL"
 msgstr "STL ile değiştirin"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Seçilen parçayı yeni STL ile değiştirin"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3746,7 +3746,7 @@ msgstr "Dikdörtgen"
 msgid "Circular"
 msgstr "Dairesel"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "Şekli STL'den yükle..."
 
 msgid "Settings"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -2030,13 +2030,13 @@ msgstr "Перезавантажте вибрані частини з диска
 msgid "Replace with STL"
 msgstr "Замінити на STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Замініть вибрану частину новим STL"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3778,8 +3778,8 @@ msgstr "Прямокутний"
 msgid "Circular"
 msgstr "Округлий"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Завантажити форму з STL..."
+msgstr "Завантажити форму з STL ..."
 
 msgid "Settings"
 msgstr "Налаштування"

localization/i18n/vi/OrcaSlicer_vi.po

@@ -2000,13 +2000,13 @@ msgstr "Tải lại các phần đã chọn từ ổ đĩa"
 msgid "Replace with STL"
 msgstr "Thay thế bằng STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "Thay thế phần đã chọn bằng STL mới"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3701,8 +3701,8 @@ msgstr "Hình chữ nhật"
 msgid "Circular"
 msgstr "Hình tròn"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
-msgstr "Tải hình dạng từ STL..."
+msgstr "Tải hình dạng từ STL ..."
 
 msgid "Settings"
 msgstr "Cài đặt"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -1980,13 +1980,13 @@ msgstr "从磁盘重新加载选中的零件"
 msgid "Replace with STL"
 msgstr "替换为STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "用新的STL替换选中的零件"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3629,7 +3629,7 @@ msgstr "矩形"
 msgid "Circular"
 msgstr "圆"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "从STL文件加载形状..."
 
 msgid "Settings"

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -1981,13 +1981,13 @@ msgstr "從硬碟重新載入選中的零件"
 msgid "Replace with STL"
 msgstr "替換為 STL"
 
-msgid "Replace the selected part with new STL"
+msgid "Replace the selected part with new STL."
 msgstr "用新的 STL 替換選中的零件"
 
 msgid "Replace all with STL"
 msgstr ""
 
-msgid "Replace all selected parts with STL from folder"
+msgid "Replace all selected parts with STL from folder."
 msgstr ""
 
 msgid "Change filament"
@@ -3634,7 +3634,7 @@ msgstr "矩形"
 msgid "Circular"
 msgstr "圓"
 
-msgid "Load shape from STL..."
+msgid "Load shape from STL ..."
 msgstr "從 STL 檔案載入形狀..."
 
 msgid "Settings"

src/slic3r/GUI/BedShapeDialog.cpp

@@ -229,7 +229,7 @@ void BedShapePanel::build_panel(const Pointfs& default_pt, const std::string& cu
 	Line line{ "", "" };
 	line.full_width = 1;
 	line.widget = [this](wxWindow* parent) {
-        Button* shape_btn = new Button(parent, _L("Load shape from STL..."));
+        Button* shape_btn = new Button(parent, _L("Load shape from STL ..."));
         shape_btn->SetStyle(ButtonStyle::Regular, ButtonType::Expanded);
 
         wxSizer* shape_sizer = new wxBoxSizer(wxHORIZONTAL);

src/slic3r/GUI/GUI_Factories.cpp

@@ -864,14 +864,14 @@ void MenuFactory::append_menu_item_reload_from_disk(wxMenu* menu)
 
 void MenuFactory::append_menu_item_replace_with_stl(wxMenu *menu)
 {
-    append_menu_item(menu, wxID_ANY, _L("Replace with STL"), _L("Replace the selected part with new STL"),
+    append_menu_item(menu, wxID_ANY, _L("Replace with STL") + dots, _L("Replace the selected part with new STL."),
         [](wxCommandEvent &) { plater()->replace_with_stl(); }, "", menu,
         []() { return plater()->can_replace_with_stl(); }, m_parent);
 }
 
 void MenuFactory::append_menu_item_replace_all_with_stl(wxMenu *menu)
 {
-    append_menu_item(menu, wxID_ANY, _L("Replace all with STL"), _L("Replace all selected parts with STL from folder"),
+    append_menu_item(menu, wxID_ANY, _L("Replace all with STL") + dots, _L("Replace all selected parts with STL from folder."),
         [](wxCommandEvent &) { plater()->replace_all_with_stl(); }, "", menu,
         []() { return plater()->can_replace_all_with_stl(); }, m_parent);
 }