From 1d30019679404bcb43ddabd4985c679e13194861 Mon Sep 17 00:00:00 2001 From: SoftFever Date: Fri, 31 Jul 2026 18:38:25 +0800 Subject: [PATCH] update snapmaker profiles. largely ported for Snapmaker Orca fork --- resources/profiles/Snapmaker.json | 278 ++++++++++++++++- .../Polymaker General PLA Family @U1.json | 32 ++ .../filament/Polymaker PLA @U1 base.json | 107 +++++++ .../Polymaker Silk PLA Family @U1.json | 32 ++ .../Polymaker Tough PLA Family @U1.json | 32 ++ ...akaway Support For PLA @U1 0.2 nozzle.json | 101 +++++++ ...akaway Support For PLA @U1 0.6 nozzle.json | 101 +++++++ ...akaway Support For PLA @U1 0.8 nozzle.json | 95 ++++++ ...apmaker Breakaway Support For PLA @U1.json | 79 ++++- .../Snapmaker PETG HF @U1 0.2 nozzle.json | 105 +++++++ .../Snapmaker PETG HF @U1 0.6 nozzle.json | 110 +++++++ .../Snapmaker PETG HF @U1 0.8 nozzle.json | 107 +++++++ .../filament/Snapmaker PETG HF @U1 base2.json | 279 +++++++++++++++++ ...maker PETG Translucent @U1 0.2 nozzle.json | 107 +++++++ ...maker PETG Translucent @U1 0.4 nozzle.json | 95 ++++++ ...maker PETG Translucent @U1 0.6 nozzle.json | 104 +++++++ ...maker PETG Translucent @U1 0.8 nozzle.json | 101 +++++++ .../Snapmaker PETG Translucent @U1 base.json | 8 + .../filament/Snapmaker PLA @U1 base.json | 6 +- .../Snapmaker PLA Basic @U1 base.json | 127 ++++++++ .../filament/Snapmaker PLA Basic @U1.json | 281 +++++++++++++++++ .../filament/Snapmaker PLA Eco @U1 base.json | 6 +- ...aker PLA Full Spectrum @U1 0.4 nozzle.json | 281 +++++++++++++++++ .../Snapmaker PLA Glow @U1 0.4 nozzle.json | 92 ++++++ .../filament/Snapmaker PLA Glow @U1 base.json | 44 +++ .../Snapmaker PLA Matte @U1 0.2 nozzle.json | 284 ++++++++++++++++++ .../Snapmaker PLA Matte @U1 0.6 nozzle.json | 284 ++++++++++++++++++ .../Snapmaker PLA Matte @U1 0.8 nozzle.json | 284 ++++++++++++++++++ .../Snapmaker PLA Matte @U1 base.json | 4 +- .../Snapmaker PLA Matte @U1 base2.json | 127 ++++++++ .../filament/Snapmaker PLA Matte @U1.json | 27 +- .../Snapmaker PLA Metal @U1 base.json | 9 +- .../Snapmaker PLA Silk @U1 0.2 nozzle.json | 282 +++++++++++++++++ .../Snapmaker PLA Silk @U1 0.6 nozzle.json | 282 +++++++++++++++++ .../Snapmaker PLA Silk @U1 0.8 nozzle.json | 282 +++++++++++++++++ .../filament/Snapmaker PLA Silk @U1 base.json | 9 +- .../filament/Snapmaker PLA Silk @U1.json | 277 ++++++++++++++++- ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json | 47 +++ ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json | 38 +++ ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json | 38 +++ .../Snapmaker PLA SnapSpeed @U1 base.json | 4 +- .../Snapmaker PLA SnapSpeed @U1 base2.json | 281 +++++++++++++++++ .../filament/Snapmaker PLA SnapSpeed @U1.json | 43 ++- ...pmaker PLA Translucent @U1 0.2 nozzle.json | 281 +++++++++++++++++ ...pmaker PLA Translucent @U1 0.4 nozzle.json | 281 +++++++++++++++++ ...pmaker PLA Translucent @U1 0.6 nozzle.json | 281 +++++++++++++++++ ...pmaker PLA Translucent @U1 0.8 nozzle.json | 281 +++++++++++++++++ .../Snapmaker PLA Translucent @U1 base.json | 44 +++ .../Snapmaker PLA Wood @U1 0.4 nozzle.json | 105 +++++++ .../Snapmaker PLA Wood @U1 0.6 nozzle.json | 111 +++++++ .../Snapmaker PLA Wood @U1 0.8 nozzle.json | 111 +++++++ .../Snapmaker PLA-CF @U1 0.4 nozzle.json | 129 ++++++++ .../Snapmaker PLA-CF @U1 0.6 nozzle.json | 135 +++++++++ .../Snapmaker PLA-CF @U1 0.8 nozzle.json | 132 ++++++++ .../filament/Snapmaker PLA-CF @U1 base.json | 9 +- .../Snapmaker PVA @U1 0.6 nozzle.json | 110 +++++++ .../Snapmaker PVA @U1 0.8 nozzle.json | 104 +++++++ .../filament/Snapmaker PVA @U1 base.json | 6 +- .../Snapmaker/filament/Snapmaker PVA @U1.json | 91 +++++- .../Snapmaker TPU 90A @U1 0.6 nozzle.json | 147 +++++++++ .../Snapmaker TPU 90A @U1 0.8 nozzle.json | 141 +++++++++ .../filament/Snapmaker TPU 90A @U1.json | 138 +++++++++ .../filament/Snapmaker TPU 95A @U1 base.json | 7 +- .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json | 144 +++++++++ .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json | 144 +++++++++ .../filament/Snapmaker TPU 95A HF @U1.json | 141 +++++++++ .../filament/Snapmaker TPU @U1 base.json | 6 +- .../machine/Snapmaker U1 (0.2 nozzle).json | 168 ++++++++++- .../machine/Snapmaker U1 (0.4 nozzle).json | 95 ++---- .../machine/Snapmaker U1 (0.6 nozzle).json | 176 ++++++++++- .../machine/Snapmaker U1 (0.8 nozzle).json | 168 ++++++++++- .../Snapmaker/machine/Snapmaker U1.json | 2 +- .../profiles/Snapmaker/machine/fdm_U1.json | 10 +- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 70 ++--- ...6 Standard @Snapmaker U1 (0.2 nozzle).json | 62 ++-- ...Extra Fine @Snapmaker U1 (0.4 nozzle).json | 15 +- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 70 ++--- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 14 +- ...8 Standard @Snapmaker U1 (0.2 nozzle).json | 62 ++-- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 70 ++--- ...0 Standard @Snapmaker U1 (0.2 nozzle).json | 66 ++-- .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json | 15 +- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 17 +- ...2 Standard @Snapmaker U1 (0.2 nozzle).json | 62 ++-- ...4 Standard @Snapmaker U1 (0.2 nozzle).json | 62 ++-- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 15 +- ...16 Optimal @Snapmaker U1 (0.4 nozzle).json | 14 +- ...8 Standard @Snapmaker U1 (0.6 nozzle).json | 70 ++--- ... Support W @Snapmaker U1 (0.4 nozzle).json | 23 -- ...0 Standard @Snapmaker U1 (0.4 nozzle).json | 2 + ...0 Strength @Snapmaker U1 (0.4 nozzle).json | 14 +- ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json | 14 +- ...4 Standard @Snapmaker U1 (0.6 nozzle).json | 69 ++--- ...4 Standard @Snapmaker U1 (0.8 nozzle).json | 71 ++--- ...xtra Draft @Snapmaker U1 (0.4 nozzle).json | 16 +- ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 67 ++--- ...0 Strength @Snapmaker U1 (0.6 nozzle).json | 71 ++--- ...2 Standard @Snapmaker U1 (0.8 nozzle).json | 74 ++--- ...6 Standard @Snapmaker U1 (0.6 nozzle).json | 69 ++--- ...0 Standard @Snapmaker U1 (0.8 nozzle).json | 76 ++--- ...2 Standard @Snapmaker U1 (0.6 nozzle).json | 69 ++--- ...8 Standard @Snapmaker U1 (0.8 nozzle).json | 71 ++--- ...6 Standard @Snapmaker U1 (0.8 nozzle).json | 68 ++--- .../Snapmaker/process/fdm_process_U1.json | 1 - .../fdm_process_U1_0.06_nozzle_0.2.json | 27 ++ .../fdm_process_U1_0.08_nozzle_0.2.json | 27 ++ .../fdm_process_U1_0.10_nozzle_0.2.json | 27 ++ .../fdm_process_U1_0.12_nozzle_0.2.json | 27 ++ .../fdm_process_U1_0.14_nozzle_0.2.json | 27 ++ .../fdm_process_U1_0.18_nozzle_0.6.json | 26 ++ .../fdm_process_U1_0.24_nozzle_0.6.json | 24 ++ .../fdm_process_U1_0.24_nozzle_0.8.json | 26 ++ .../fdm_process_U1_0.30_nozzle_0.6.json | 24 ++ .../fdm_process_U1_0.32_nozzle_0.8.json | 26 ++ .../fdm_process_U1_0.36_nozzle_0.6.json | 24 ++ .../fdm_process_U1_0.40_nozzle_0.8.json | 26 ++ .../fdm_process_U1_0.42_nozzle_0.6.json | 24 ++ .../fdm_process_U1_0.48_nozzle_0.8.json | 26 ++ .../fdm_process_U1_0.56_nozzle_0.8.json | 26 ++ .../process/fdm_process_U1_0.6_common.json | 2 +- .../process/fdm_process_U1_common.json | 10 +- .../Snapmaker/process/fdm_process_a400.json | 2 +- .../Snapmaker/process/fdm_process_idex.json | 2 +- 123 files changed, 9894 insertions(+), 978 deletions(-) create mode 100644 resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json create mode 100644 resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json create mode 100644 resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json create mode 100644 resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json delete mode 100644 resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json create mode 100644 resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index cdc7f0fe81..ab2433242e 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.07", + "version": "02.04.00.08", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ @@ -426,10 +426,6 @@ "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)", "sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json" }, - { - "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)", - "sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json" - }, { "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)", "sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json" @@ -486,6 +482,66 @@ "name": "fdm_process_U1_0.8_common", "sub_path": "process/fdm_process_U1_0.8_common.json" }, + { + "name": "fdm_process_U1_0.06_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.08_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.10_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.12_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.14_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.18_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.24_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.24_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.30_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.32_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.36_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.40_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.42_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.48_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.56_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json" + }, { "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", "sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json" @@ -1508,10 +1564,6 @@ "name": "Snapmaker PLA Metal @U1", "sub_path": "filament/Snapmaker PLA Metal @U1.json" }, - { - "name": "Snapmaker PLA Silk @U1", - "sub_path": "filament/Snapmaker PLA Silk @U1.json" - }, { "name": "Snapmaker PLA Silk", "sub_path": "filament/Snapmaker PLA Silk.json" @@ -1671,6 +1723,214 @@ { "name": "Snapmaker PLA Matte @U1 base", "sub_path": "filament/Snapmaker PLA Matte @U1 base.json" + }, + { + "name": "Polymaker PLA @U1 base", + "sub_path": "filament/Polymaker PLA @U1 base.json" + }, + { + "name": "Polymaker Silk PLA Family @U1", + "sub_path": "filament/Polymaker Silk PLA Family @U1.json" + }, + { + "name": "Polymaker Tough PLA Family @U1", + "sub_path": "filament/Polymaker Tough PLA Family @U1.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 base2", + "sub_path": "filament/Snapmaker PETG HF @U1 base2.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 base", + "sub_path": "filament/Snapmaker PETG Translucent @U1 base.json" + }, + { + "name": "Snapmaker PLA Basic @U1 base", + "sub_path": "filament/Snapmaker PLA Basic @U1 base.json" + }, + { + "name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Glow @U1 base", + "sub_path": "filament/Snapmaker PLA Glow @U1 base.json" + }, + { + "name": "Snapmaker PLA Matte @U1 base2", + "sub_path": "filament/Snapmaker PLA Matte @U1 base2.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 base2", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 base", + "sub_path": "filament/Snapmaker PLA Translucent @U1 base.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1", + "sub_path": "filament/Snapmaker TPU 90A @U1.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1", + "sub_path": "filament/Snapmaker TPU 95A HF @U1.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1", + "sub_path": "filament/Snapmaker PLA Silk @U1.json" + }, + { + "name": "Polymaker General PLA Family @U1", + "sub_path": "filament/Polymaker General PLA Family @U1.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Basic @U1", + "sub_path": "filament/Snapmaker PLA Basic @U1.json" + }, + { + "name": "Snapmaker PLA Glow @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json new file mode 100644 index 0000000000..188603a235 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "setting_id": "thXfSaUkOAKJ50ey", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "from": "system", + "inherits": "Polymaker PLA @U1 base", + "name": "Polymaker General PLA Family @U1", + "nozzle_temperature_range_high": [ + "230" + ], + "temperature_vitrification": [ + "62" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json new file mode 100644 index 0000000000..285071c34c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Polymaker PLA @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Generic" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "15%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_id": "OGFL99" +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json new file mode 100644 index 0000000000..917201664a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "setting_id": "h8vIYpXbxFtHPV6e", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_density": [ + "1.34" + ], + "filament_vendor": [ + "Polymaker" + ], + "from": "system", + "inherits": "Polymaker PLA @U1 base", + "name": "Polymaker Silk PLA Family @U1", + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json new file mode 100644 index 0000000000..18b891e174 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "setting_id": "d6CC81Es2hp46bto", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_vendor": [ + "Polymaker" + ], + "from": "system", + "inherits": "Polymaker PLA @U1 base", + "name": "Polymaker Tough PLA Family @U1", + "slow_down_layer_time": [ + "6" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json new file mode 100644 index 0000000000..561abf17a8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "mJoaud6wulT4p8SA", + "instantiation": "true", + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json new file mode 100644 index 0000000000..c309027a0d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "rKUUREJNhstIU0I2", + "instantiation": "true", + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.02" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json new file mode 100644 index 0000000000..e7718d783f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "hQ8jQ5GKQKGKuPew", + "instantiation": "true", + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_retraction_length": [ + "3" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.015" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "textured_plate_temp": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json index 97b2f8b07f..a7f2c267a4 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json @@ -1,14 +1,89 @@ { "type": "filament", - "name": "Snapmaker Breakaway Support For PLA @U1", - "inherits": "Snapmaker Breakaway Support @base", "from": "system", "setting_id": "5DqT3CYUgp1oJD1V", "instantiation": "true", + "name": "Snapmaker Breakaway Support For PLA @U1", + "inherits": "Snapmaker Breakaway Support @base", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], "filament_type": [ "PLA" + ], + "enable_pressure_advance": [ + "1" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.03" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json new file mode 100644 index 0000000000..91f76d3a82 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -0,0 +1,105 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.2 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "Ujul2YTBwfldFiFd", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "\n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "3" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_z_hop_types": [ + "Slope Lift" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..e77df68378 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.6 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "2FfQZdp5xunngnF0", + "instantiation": "true", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "2.5" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..d496bcdf2a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.8 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "ebANa67V4B2nwUaX", + "instantiation": "true", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json new file mode 100644 index 0000000000..0ad75759a1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json @@ -0,0 +1,279 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 base2", + "inherits": "fdm_filament_petg", + "from": "system", + "filament_id": "GFG96", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_type": [ + "PETG" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "25" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "counter_coef_1": [ + "0" + ], + "counter_coef_2": [ + "0.008" + ], + "counter_coef_3": [ + "-0.041" + ], + "counter_limit_min": [ + "-0.035" + ], + "counter_limit_max": [ + "0.033" + ], + "circle_compensation_speed": [ + "200" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "diameter_limit": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "0" + ], + "filament_dev_ams_drying_ams_limitations": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "40.0" + ], + "filament_dev_ams_drying_time": [ + "8.0" + ], + "filament_dev_drying_softening_temperature": [ + "40.0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45.0" + ], + "filament_dev_drying_cooling_temperature": [ + "35.0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "90.0" + ], + "filament_dev_chamber_drying_time": [ + "12.0" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_long_retractions_when_ec": [ + "nil" + ], + "filament_ramming_volumetric_speed": [ + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_printable": [ + "3" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_ec": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_vendor": [ + "Generic" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], + "filament_pre_cooling_temperature": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0" + ], + "filament_ramming_travel_time": [ + "0" + ], + "filament_ramming_travel_time_nc": [ + "0" + ], + "filament_retract_length_nc": [ + "14" + ], + "hole_coef_1": [ + "0" + ], + "hole_coef_2": [ + "-0.008" + ], + "hole_coef_3": [ + "0.23415" + ], + "hole_limit_min": [ + "0.088" + ], + "hole_limit_max": [ + "0.22" + ], + "impact_strength_z": [ + "10" + ], + "long_retractions_when_ec": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "no_slow_down_for_cooling_on_outwalls": [ + "0" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "70" + ], + "filament_change_length": [ + "10" + ], + "filament_velocity_adaptation_factor": [ + "1" + ], + "compatible_printers": [], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_adaptive_volumetric_speed": [ + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json new file mode 100644 index 0000000000..72b7e59922 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "UTpedqYJysaoe3OI", + "instantiation": "true", + "name": "Snapmaker PETG Translucent @U1 0.2 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "additional_cooling_fan_speed": [ + "20" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_loading_speed": [ + "28" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.23" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json new file mode 100644 index 0000000000..f0f6d35f40 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "k6UQJJASzFSfePqN", + "instantiation": "true", + "name": "Snapmaker PETG Translucent @U1 0.4 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "24.99" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_density": [ + "1.25" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json new file mode 100644 index 0000000000..79feaaae08 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "FlcbnP3kWiJLMDMl", + "instantiation": "true", + "name": "Snapmaker PETG Translucent @U1 0.6 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json new file mode 100644 index 0000000000..5b08621529 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "aJk3TnFTU3uQGjd3", + "instantiation": "true", + "name": "Snapmaker PETG Translucent @U1 0.8 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json new file mode 100644 index 0000000000..73dfca6286 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json @@ -0,0 +1,8 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PETG Translucent @U1 base", + "filament_id": "PETG_TRANSLUCENT_001", + "inherits": "fdm_filament_petg" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json index 3100986363..7dacd9b0a3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA @U1 base", - "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "14170311270", "instantiation": "false", + "name": "Snapmaker PLA @U1 base", + "filament_id": "14170311270", + "inherits": "fdm_filament_pla", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json new file mode 100644 index 0000000000..221eecb357 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json @@ -0,0 +1,127 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PLA Basic @U1 base", + "filament_id": "1417031127011", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json new file mode 100644 index 0000000000..2ef2d92d4f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "ZtUJN4JpkR0MLpiY", + "instantiation": "true", + "name": "Snapmaker PLA Basic @U1", + "inherits": "Snapmaker PLA Basic @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json index 43a0726b2c..3a7977a6f6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA Eco @U1 base", - "inherits": "fdm_filament_pla_eco", "from": "system", - "filament_id": "2008037900", "instantiation": "false", + "name": "Snapmaker PLA Eco @U1 base", + "filament_id": "2008037900", + "inherits": "fdm_filament_pla_eco", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json new file mode 100644 index 0000000000..f95a6be917 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "iybaFWrXKOsmXgMJ", + "instantiation": "true", + "name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json new file mode 100644 index 0000000000..ced530dcbe --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json @@ -0,0 +1,92 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "ee1YNNr8CwKetuvY", + "instantiation": "true", + "name": "Snapmaker PLA Glow @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Glow @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "30" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json new file mode 100644 index 0000000000..be401186d0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PLA Glow @U1 base", + "filament_id": "SPGLOW001", + "inherits": "fdm_filament_pla", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "nozzle_temperature": [ + "220" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json new file mode 100644 index 0000000000..ce7f44c9e3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "d3c48DeNk7VDeeHf", + "instantiation": "true", + "name": "Snapmaker PLA Matte @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.05" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_minimal_purge_on_wipe_tower": [ + "5" + ], + "filament_multitool_ramming_flow": [ + "4" + ], + "filament_multitool_ramming_volume": [ + "4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_z_hop_types": [ + "nil" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json new file mode 100644 index 0000000000..f3b801757a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "l3E1WaljDn2uoTqW", + "instantiation": "true", + "name": "Snapmaker PLA Matte @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json new file mode 100644 index 0000000000..7c8b07270d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "NLPd4AA0seW3NXdy", + "instantiation": "true", + "name": "Snapmaker PLA Matte @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "215" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json index 3ffb3314a1..9d323dcf21 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json @@ -1,9 +1,9 @@ { "type": "filament", - "name": "Snapmaker PLA Matte @U1 base", "from": "system", - "filament_id": "141703112701", "instantiation": "false", + "name": "Snapmaker PLA Matte @U1 base", + "filament_id": "141703112701", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json new file mode 100644 index 0000000000..60a0fd733e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json @@ -0,0 +1,127 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PLA Matte @U1 base2", + "filament_id": "141703112701", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json index fcb1d74c92..f3ebbae174 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA Matte @U1", - "inherits": "Snapmaker PLA @U1 base", "from": "system", "setting_id": "uAhykL5ap1DAKacf", "instantiation": "true", + "name": "Snapmaker PLA Matte @U1", + "inherits": "Snapmaker PLA @U1 base", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], @@ -27,7 +27,7 @@ "0" ], "additional_cooling_fan_speed": [ - "70" + "80" ], "chamber_temperature": [ "0" @@ -47,9 +47,6 @@ "cool_plate_temp_initial_layer": [ "60" ], - "default_filament_colour": [ - "" - ], "dont_slow_down_outer_wall": [ "0" ], @@ -60,7 +57,7 @@ "1" ], "enable_pressure_advance": [ - "1" + "0" ], "eng_plate_temp": [ "60" @@ -102,7 +99,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1.01" + "1" ], "filament_is_support": [ "0" @@ -117,7 +114,7 @@ "nil" ], "filament_max_volumetric_speed": [ - "20" + "22" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -216,19 +213,19 @@ "0" ], "hot_plate_temp": [ - "55" + "65" ], "hot_plate_temp_initial_layer": [ - "55" + "65" ], "idle_temperature": [ "0" ], "nozzle_temperature": [ - "220" + "215" ], "nozzle_temperature_initial_layer": [ - "220" + "215" ], "nozzle_temperature_range_high": [ "240" @@ -276,9 +273,9 @@ "40" ], "textured_plate_temp": [ - "60" + "65" ], "textured_plate_temp_initial_layer": [ - "60" + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json index a530b9208e..dfe5d2ba15 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA Metal @U1 base", - "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "20299943460", "instantiation": "false", + "name": "Snapmaker PLA Metal @U1 base", + "filament_id": "20299943460", + "inherits": "fdm_filament_pla", "filament_end_gcode": [ "" ], @@ -46,8 +46,5 @@ ], "nozzle_temperature": [ "220" - ], - "default_filament_colour": [ - "" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json new file mode 100644 index 0000000000..f8c46d17e6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json @@ -0,0 +1,282 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "Q5xH6oGGlbXr14Pa", + "instantiation": "true", + "name": "Snapmaker PLA Silk @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "3" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ], + "filament_id": "11813638720" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json new file mode 100644 index 0000000000..a46c1e43da --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json @@ -0,0 +1,282 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "2pieDQoz9PiDCnU1", + "instantiation": "true", + "name": "Snapmaker PLA Silk @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "15" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ], + "filament_id": "11813638720" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json new file mode 100644 index 0000000000..b81c91d278 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json @@ -0,0 +1,282 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "f3H0JFUnds0mkKCN", + "instantiation": "true", + "name": "Snapmaker PLA Silk @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "15" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ], + "filament_id": "11813638720" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json index 12d65834ea..e45c1ad42f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA Silk @U1 base", - "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "11813638720", "instantiation": "false", + "name": "Snapmaker PLA Silk @U1 base", + "filament_id": "11813638720", + "inherits": "fdm_filament_pla", "filament_end_gcode": [ "" ], @@ -55,8 +55,5 @@ ], "nozzle_temperature": [ "230" - ], - "default_filament_colour": [ - "" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json index 7fdf44e792..e14d57eb1b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json @@ -1,11 +1,282 @@ { "type": "filament", - "name": "Snapmaker PLA Silk @U1", - "inherits": "Snapmaker PLA Silk @U1 base", "from": "system", "setting_id": "9PkHSwtXFM0zPWth", "instantiation": "true", + "name": "Snapmaker PLA Silk @U1", + "inherits": "Snapmaker PLA Basic @U1 base", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" - ] + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ], + "filament_id": "11813638720" } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json new file mode 100644 index 0000000000..ecec904339 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json @@ -0,0 +1,47 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "jsAgNNiUC6DoO7rz", + "instantiation": "true", + "name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "1.01" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pressure_advance": [ + "0.2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json new file mode 100644 index 0000000000..1ca65c0308 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "aKudBpQBj3MZZZav", + "instantiation": "true", + "name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retraction_length": [ + "1.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json new file mode 100644 index 0000000000..6c714b6480 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "sWoInox4hzxzIHfe", + "instantiation": "true", + "name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retraction_length": [ + "1.6" + ], + "filament_retraction_speed": [ + "30" + ], + "nozzle_temperature": [ + "215" + ], + "pressure_advance": [ + "0.018" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json index adaaf5c3c6..6bc4b97af2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json @@ -1,9 +1,9 @@ { "type": "filament", - "name": "Snapmaker PLA SnapSpeed @U1 base", "from": "system", - "filament_id": "141703112701", "instantiation": "false", + "name": "Snapmaker PLA SnapSpeed @U1 base", + "filament_id": "141703112701", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json new file mode 100644 index 0000000000..763a001cb2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PLA SnapSpeed @U1 base2", + "filament_id": "141703112701", + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers": [], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json index 96d86d2a81..b0753f2e4b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA SnapSpeed @U1", - "inherits": "Snapmaker PLA SnapSpeed @U1 base", "from": "system", "setting_id": "en6Pvvbc1P9TKm8I", "instantiation": "true", + "name": "Snapmaker PLA SnapSpeed @U1", + "inherits": "Snapmaker PLA SnapSpeed @U1 base", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], @@ -33,13 +33,13 @@ "0" ], "close_fan_the_first_x_layers": [ - "3" + "1" ], "compatible_printers_condition": "", "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "80" + "70" ], "cool_plate_temp": [ "60" @@ -47,20 +47,17 @@ "cool_plate_temp_initial_layer": [ "60" ], - "default_filament_colour": [ - "" - ], "dont_slow_down_outer_wall": [ "0" ], "during_print_exhaust_fan_speed": [ - "60" + "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "1" + "0" ], "eng_plate_temp": [ "60" @@ -102,7 +99,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.99" + "0.966" ], "filament_is_support": [ "0" @@ -117,7 +114,7 @@ "nil" ], "filament_max_volumetric_speed": [ - "18" + "20" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -126,7 +123,7 @@ "1" ], "filament_multitool_ramming_flow": [ - "40" + "30" ], "filament_multitool_ramming_volume": [ "5" @@ -159,13 +156,13 @@ "nil" ], "filament_retraction_length": [ - "0.8" + "1.2" ], "filament_retraction_minimum_travel": [ "nil" ], "filament_retraction_speed": [ - "30" + "nil" ], "filament_shrink": [ "100%" @@ -207,19 +204,19 @@ "nil" ], "filament_z_hop": [ - "nil" + "0.4" ], "filament_z_hop_types": [ - "nil" + "Slope Lift" ], "full_fan_speed_layer": [ "0" ], "hot_plate_temp": [ - "55" + "65" ], "hot_plate_temp_initial_layer": [ - "55" + "65" ], "idle_temperature": [ "0" @@ -231,7 +228,7 @@ "220" ], "nozzle_temperature_range_high": [ - "230" + "240" ], "nozzle_temperature_range_low": [ "190" @@ -246,7 +243,7 @@ "0.4157" ], "pressure_advance": [ - "0.026" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -267,7 +264,7 @@ "-1" ], "temperature_vitrification": [ - "60" + "45" ], "textured_cool_plate_temp": [ "40" @@ -276,9 +273,9 @@ "40" ], "textured_plate_temp": [ - "60" + "65" ], "textured_plate_temp_initial_layer": [ - "60" + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json new file mode 100644 index 0000000000..013a92205d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "zIg9XLrieYNBduyn", + "instantiation": "true", + "name": "Snapmaker PLA Translucent @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.15" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json new file mode 100644 index 0000000000..31f391a6ed --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "RqtrcLcy124ICGEc", + "instantiation": "true", + "name": "Snapmaker PLA Translucent @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "8" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json new file mode 100644 index 0000000000..246664d267 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "OZHemzEcvzFMN8fL", + "instantiation": "true", + "name": "Snapmaker PLA Translucent @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json new file mode 100644 index 0000000000..ac4087ae7e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "IPehCg9fKawLorB5", + "instantiation": "true", + "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json new file mode 100644 index 0000000000..cd71196cfb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "from": "system", + "instantiation": "false", + "name": "Snapmaker PLA Translucent @U1 base", + "filament_id": "SPTR001", + "inherits": "fdm_filament_pla", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "nozzle_temperature": [ + "220" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json new file mode 100644 index 0000000000..a53a8b5553 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json @@ -0,0 +1,105 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "4" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "setting_id": "XvizDDHbds3bVrzi", + "filament_id": "GFL9922" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json new file mode 100644 index 0000000000..bbadd5825d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json @@ -0,0 +1,111 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "pressure_advance": [ + "0.014" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "setting_id": "Kp77DCcitdmoyjqm", + "filament_id": "GFL9922" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json new file mode 100644 index 0000000000..54216412f7 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json @@ -0,0 +1,111 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.965" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "pressure_advance": [ + "0.007" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "setting_id": "nBYnNiqwLo6nAsqi", + "filament_id": "GFL9922" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..43985efdc3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -0,0 +1,129 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "50" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pressure_advance": [ + "0.01" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "2INwruC3ZVkBTdUT", + "filament_id": "GFL98111" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..c3099ec668 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json @@ -0,0 +1,135 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "2" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.015" + ], + "filament_cost": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_wipe_distance": [ + "2" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "CKfdL85SvbOLzMuP", + "filament_id": "GFL98111" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..299866c11f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json @@ -0,0 +1,132 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retraction_length": [ + "3" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.015" + ], + "filament_cost": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "slow_down_layer_time": [ + "8" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "setting_id": "fhhnfJm4dN9FXpWQ", + "filament_id": "GFL98111" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json index 617a8c23ea..6bd229f904 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PLA-CF @U1 base", - "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "17021473250", "instantiation": "false", + "name": "Snapmaker PLA-CF @U1 base", + "filament_id": "17021473250", + "inherits": "fdm_filament_pla", "filament_end_gcode": [ "" ], @@ -59,9 +59,6 @@ "temperature_vitrification": [ "150" ], - "default_filament_colour": [ - "" - ], "filament_type": [ "PLA-CF" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json new file mode 100644 index 0000000000..e203754734 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "lIqgnfeZdAm8G0TH", + "instantiation": "true", + "name": "Snapmaker PVA @U1 0.6 nozzle", + "inherits": "Snapmaker PVA @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "79.98" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "7" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "fan_min_speed": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json new file mode 100644 index 0000000000..b367c0bc1e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "from": "system", + "setting_id": "WxtuvwWxy73Gi0IK", + "instantiation": "true", + "name": "Snapmaker PVA @U1 0.8 nozzle", + "inherits": "Snapmaker PVA @U1 base", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "79.98" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "1" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_low": [ + "205" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "7" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json index 91ff319c8e..c4c9d128cc 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker PVA @U1 base", - "inherits": "fdm_filament_pva", "from": "system", - "filament_id": "31046369800", "instantiation": "false", + "name": "Snapmaker PVA @U1 base", + "filament_id": "31046369800", + "inherits": "fdm_filament_pva", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json index f9a33d7bcb..96bc2e3226 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json @@ -1,11 +1,98 @@ { "type": "filament", - "name": "Snapmaker PVA @U1", - "inherits": "Snapmaker PVA @U1 base", "from": "system", "setting_id": "A9gyeySGTtUrTPeG", "instantiation": "true", + "name": "Snapmaker PVA @U1", + "inherits": "Snapmaker PVA @U1 base", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.03" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json new file mode 100644 index 0000000000..836040328e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json @@ -0,0 +1,147 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.6 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "uQCplebxmpBpzsnk", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.02" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "20" + ], + "filament_flow_ratio": [ + "1.093" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "14" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "0" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json new file mode 100644 index 0000000000..9dd732d2c1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json @@ -0,0 +1,141 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.8 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "w4Hpl2qNPmgNvaeM", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.5" + ], + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.02" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "20" + ], + "filament_flow_ratio": [ + "1.095" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "14" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json new file mode 100644 index 0000000000..58530c90a5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json @@ -0,0 +1,138 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "T4MmgICRrSzvmCZ5", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "15" + ], + "filament_flow_ratio": [ + "1.045" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "15" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "14" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json index a6d8c41b5d..9350b8c7c2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json @@ -1,9 +1,9 @@ { "type": "filament", - "name": "Snapmaker TPU 95A @U1 base", "from": "system", - "filament_id": "297165629001", "instantiation": "false", + "name": "Snapmaker TPU 95A @U1 base", + "filament_id": "297165629001", "overhang_fan_threshold": [ "95%" ], @@ -43,9 +43,6 @@ "filament_retraction_speed": [ "nil" ], - "filament_settings_id": [ - "" - ], "filament_soluble": [ "0" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..4c0b288d27 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.6 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "Q2svXpkEqg0dCdq3", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.067" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.14" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..d691845c29 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.8 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "RjsE08h3l37cAkAs", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.045" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_multitool_ramming_flow": [ + "15" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.12" + ], + "slow_down_layer_time": [ + "12" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json new file mode 100644 index 0000000000..d3f15f9642 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json @@ -0,0 +1,141 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "KwcwmV2UmZUgCBoz", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.067" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.23" + ], + "slow_down_layer_time": [ + "10" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json index 6e9efb2034..bad7fe4e34 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json @@ -1,10 +1,10 @@ { "type": "filament", - "name": "Snapmaker TPU @U1 base", - "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "29716562900", "instantiation": "false", + "name": "Snapmaker TPU @U1 base", + "filament_id": "29716562900", + "inherits": "fdm_filament_tpu", "filament_end_gcode": [ "" ], diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 8a5cbc56d8..2e65b6a28b 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -1,13 +1,54 @@ { "type": "machine", - "setting_id": "CwJeuh1rxZcjvkXh", "name": "Snapmaker U1 (0.2 nozzle)", "from": "system", + "setting_id": "CwJeuh1rxZcjvkXh", "instantiation": "true", "inherits": "fdm_U1", "printer_model": "Snapmaker U1", "printer_variant": "0.2", - "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ "0.14", "0.14", @@ -26,5 +67,126 @@ "0.2", "0.2" ], - "nozzle_type": "hardened_steel" + "nozzle_type": "hardened_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index 1105a7ec1d..1e0aee4bcd 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -1,14 +1,20 @@ { "type": "machine", - "setting_id": "UeTP4RqAd7xAMHVE", "name": "Snapmaker U1 (0.4 nozzle)", "from": "system", + "setting_id": "UeTP4RqAd7xAMHVE", "instantiation": "true", "inherits": "fdm_U1", "printer_model": "Snapmaker U1", "printer_variant": "0.4", "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], "extruder_colour": [ "#FCE94F", "#FCE94F", @@ -29,38 +35,6 @@ "0" ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", - "machine_max_acceleration_extruding": [ - "25000", - "25000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "25000", - "25000" - ], - "machine_max_acceleration_x": [ - "25000", - "25000" - ], - "machine_max_acceleration_y": [ - "25000", - "25000" - ], - "machine_max_acceleration_z": [ - "500", - "200" - ], - "machine_max_jerk_x": [ - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9" - ], "machine_max_jerk_z": [ "3", "0.4" @@ -69,22 +43,11 @@ "30", "25" ], - "machine_max_speed_x": [ - "1000", - "200" - ], - "machine_max_speed_y": [ - "1000", - "200" - ], "machine_max_speed_z": [ "20", "12" ], - "resonance_avoidance": "1", - "min_resonance_avoidance_speed": "40", - "max_resonance_avoidance_speed": "90", - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20251222 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n; Original upstream: BED_MESH_CALIBRATE PROBE_COUNT=11,11\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.32", @@ -104,7 +67,7 @@ "0.4", "0.4" ], - "nozzle_type": "stainless_steel", + "nozzle_type": "hardened_steel", "printable_area": [ "0.5x1", "270.5x1", @@ -112,7 +75,6 @@ "0.5x271" ], "printable_height": "270.05", - "printer_settings_id": "MyToolChanger 0.4 nozzle - Copy", "retract_before_wipe": [ "0%", "0%", @@ -168,10 +130,10 @@ "18" ], "retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" + "1.5", + "1.5", + "1.5", + "1.5" ], "retraction_minimum_travel": [ "1", @@ -180,16 +142,10 @@ "1" ], "retraction_speed": [ - "40", - "40", - "40", - "40" - ], - "deretraction_speed": [ - "35", - "35", - "35", - "35" + "30", + "30", + "30", + "30" ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ @@ -228,17 +184,12 @@ "machine_load_filament_time": "0", "machine_unload_filament_time": "0", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", - "z_hop_when_prime": [ - "0", - "0", - "0", - "0" - ], - "ramming_pressure_advance_value": "0.02", - "tool_change_temprature_wait": "0", - "printer_notes": "", + "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", "machine_pause_gcode": "M600", "default_bed_type": "Textured PEI Plate", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num+1}", - "nozzle_volume": "143" + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "resonance_avoidance": "1", + "min_resonance_avoidance_speed": "40", + "max_resonance_avoidance_speed": "90" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index 60e699d108..bdc4c4a2b5 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -1,18 +1,59 @@ { "type": "machine", - "setting_id": "1OseO7RSPgE4CRKO", "name": "Snapmaker U1 (0.6 nozzle)", "from": "system", + "setting_id": "1OseO7RSPgE4CRKO", "instantiation": "true", "inherits": "fdm_U1", "printer_model": "Snapmaker U1", "printer_variant": "0.6", - "default_print_profile": "0.20 Standard @Snapmaker U1 (0.6 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ - "0.48", - "0.48", - "0.48", - "0.48" + "0.42", + "0.42", + "0.42", + "0.42" ], "min_layer_height": [ "0.12", @@ -26,5 +67,126 @@ "0.6", "0.6" ], - "nozzle_type": "stainless_steel" + "nozzle_type": "stainless_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3", + "3", + "3" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "1", + "1", + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index b775c2c964..eacd417e69 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -1,13 +1,54 @@ { "type": "machine", - "setting_id": "WTkhQtyDO06YY6AG", "name": "Snapmaker U1 (0.8 nozzle)", "from": "system", + "setting_id": "WTkhQtyDO06YY6AG", "instantiation": "true", "inherits": "fdm_U1", "printer_model": "Snapmaker U1", "printer_variant": "0.8", - "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ "0.56", "0.56", @@ -26,5 +67,126 @@ "0.8", "0.8" ], - "nozzle_type": "hardened_steel" + "nozzle_type": "hardened_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json index fb703f2e75..d78dcfca76 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json @@ -1,8 +1,8 @@ { "type": "machine_model", - "name": "Snapmaker U1", "machine_tech": "FFF", "family": "Snapmaker", + "name": "Snapmaker U1", "url": "", "model_id": "797581801", "bed_model": "Snapmaker U1_bed.stl", diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json index 73fe5b74ef..002c380ddb 100644 --- a/resources/profiles/Snapmaker/machine/fdm_U1.json +++ b/resources/profiles/Snapmaker/machine/fdm_U1.json @@ -1,9 +1,9 @@ { "type": "machine", "name": "fdm_U1", - "inherits": "fdm_toolchanger", "from": "system", "instantiation": "false", + "inherits": "fdm_toolchanger", "gcode_flavor": "klipper", "single_extruder_multi_material": "0", "bed_model": "Snapmaker U1_bed.stl", @@ -176,8 +176,6 @@ "Normal Lift", "Normal Lift" ], - "bed_mesh_max": "267,267", - "bed_mesh_min": "3,3", "purge_in_prime_tower": "0", "machine_pause_gcode": "M601", "change_filament_gcode": "", @@ -186,12 +184,14 @@ "nozzle_type": "undefine", "auxiliary_fan": "0", "default_bed_type": "Textured PEI Plate", - "printer_agent": "snapmaker", "printable_area": [ "0.5x1", "270.5x1", "270.5x271", "0.5x271" ], - "printable_height": "270.05" + "printable_height": "270.05", + "bed_mesh_min": "3,3", + "bed_mesh_max": "267,267", + "printer_agent": "snapmaker" } diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 996b127b77..dcdcea2837 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.06", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.06", - "support_bottom_z_distance": "0.06", - "setting_id": "3SCofR6VrVyo3vJp", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.06_nozzle_0.2", + "from": "system", + "setting_id": "3SCofR6VrVyo3vJp", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "13.5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 85e50ec87f..2a7007d275 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.06", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.06", - "support_bottom_z_distance": "0.06", - "setting_id": "997RaiNHd2YhpaRB", - "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.06_nozzle_0.2", + "from": "system", + "setting_id": "997RaiNHd2YhpaRB", + "instantiation": "true", + "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "13.5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index aeffe99f2a..003b822eda 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,19 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "18", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "outer_wall_speed": "100", + "precise_outer_wall": "0", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index fe0fc0e87d..806fa8bd0b 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.08", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.08", - "support_bottom_z_distance": "0.08", - "setting_id": "6ExpMU3Wq4J1R7wy", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.08_nozzle_0.2", + "from": "system", + "setting_id": "6ExpMU3Wq4J1R7wy", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "18", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index b86156d841..92a898cd4d 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -21,6 +21,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "18", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index 472176ff40..4b428b9a8f 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.08", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.08", - "support_bottom_z_distance": "0.08", - "setting_id": "loFrCYH9ux2L5JpZ", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.08_nozzle_0.2", + "from": "system", + "setting_id": "loFrCYH9ux2L5JpZ", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "18", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index 0f15ce7c5f..48c2718d2f 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.1", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.1", - "support_bottom_z_distance": "0.1", - "setting_id": "BfLpmnJnSBYBFInR", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "28", - "prime_volume": "25", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.10_nozzle_0.2", + "from": "system", + "setting_id": "BfLpmnJnSBYBFInR", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "28", + "prime_volume": "25", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index 460bf8b6fd..4b0dc6464c 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,41 +1,29 @@ { - "type": "process", - "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.1", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.1", - "support_bottom_z_distance": "0.1", - "setting_id": "SOq962UWv1ml1Mk0", - "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "preheat_time": "31", - "prime_tower_brim_width": "6", - "prime_tower_width": "28", - "prime_volume": "25", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "slowdown_for_curled_perimeters": "0" + "type": "process", + "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.10_nozzle_0.2", + "from": "system", + "setting_id": "SOq962UWv1ml1Mk0", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "preheat_time": "31", + "prime_tower_brim_width": "6", + "prime_tower_width": "28", + "prime_volume": "25", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "slowdown_for_curled_perimeters": "0" } diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index 42823b3f0b..a1ceb20261 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -13,5 +13,18 @@ ], "ooze_prevention": "1", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "27", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_threshold_angle": "25", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index 8564a41b24..ae41441498 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -20,5 +20,20 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], - "slowdown_for_curled_perimeters": "0" + "prime_tower_width": "30", + "prime_volume": "27", + "slowdown_for_curled_perimeters": "0", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "25", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index de68cc0dd0..70c53d8a16 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.12", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.12", - "support_bottom_z_distance": "0.12", - "setting_id": "KHC1zpxpuvaUEzvf", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "28", - "prime_volume": "27", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.12_nozzle_0.2", + "from": "system", + "setting_id": "KHC1zpxpuvaUEzvf", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "28", + "prime_volume": "27", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index c265d55e67..0a8b5a3fd5 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.14", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.14", - "support_bottom_z_distance": "0.14", - "setting_id": "NGJoV0n6T510y9wM", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "32", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.14_nozzle_0.2", + "from": "system", + "setting_id": "NGJoV0n6T510y9wM", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "32", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index e66f9f3beb..f37ee6a865 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -21,6 +21,19 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "36", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_threshold_angle": "30", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index 2817871fad..5b1358e863 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "36", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index e68cf86d75..35201f64d5 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,42 +1,32 @@ { - "type": "process", - "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.25", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "support_top_z_distance": "0.18", - "support_bottom_z_distance": "0.18", - "setting_id": "XGSrVgnsUFv6uCRs", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "41", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "type": "process", + "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.18_nozzle_0.6", + "from": "system", + "setting_id": "XGSrVgnsUFv6uCRs", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "layer_height": "0.25", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "41", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json deleted file mode 100644 index 5de608c68d..0000000000 --- a/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json +++ /dev/null @@ -1,23 +0,0 @@ -{ - "type": "process", - "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)", - "inherits": "fdm_process_U1_0.20", - "from": "system", - "setting_id": "8OkVMuElKExBdftG", - "instantiation": "true", - "enable_support": "1", - "support_interface_top_layers": "3", - "support_top_z_distance": "0.2", - "support_interface_loop_pattern": "1", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_filament": "0", - "support_interface_filament": "0", - "enable_prime_tower": "1", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)" - ], - "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" -} diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 243718507b..31ea0534b7 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,8 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "40", + "prime_volume": "15", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index 4defa45a16..6d73b1f22e 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "45", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index a4c10a8ad1..9e3a5a723f 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "54", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "0", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index b8a8427baf..95a12fc605 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.24", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "BziJYuA5U5gWm6FM", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "55", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.24_nozzle_0.6", + "from": "system", + "setting_id": "BziJYuA5U5gWm6FM", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "55", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index 1b13e745d2..ea76d4a103 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,43 +1,32 @@ { - "type": "process", - "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.24", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "QcJ5p9h0eYUb91ak", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "min_width_top_surface": "90", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "54", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.24_nozzle_0.8", + "from": "system", + "setting_id": "QcJ5p9h0eYUb91ak", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "min_width_top_surface": "90", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "54", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 4adf06f100..658dc94d2d 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -11,5 +11,19 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], - "slowdown_for_curled_perimeters": "0" + "prime_tower_width": "30", + "prime_volume": "63", + "slowdown_for_curled_perimeters": "0", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index 3ed454a7d5..3752acfd65 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,40 +1,31 @@ { - "type": "process", - "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.3", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "TWxp6qgz1DJa8Ngo", - "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "68", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.30_nozzle_0.6", + "from": "system", + "setting_id": "TWxp6qgz1DJa8Ngo", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "68", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index ce6563d960..5adef31a51 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -1,42 +1,33 @@ { - "type": "process", - "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.3", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "CBaL0vgwtgsd6Snj", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "elefant_foot_compensation": "0.15", - "sparse_infill_density": "25%", - "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_width": "30", - "prime_volume": "68", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_spacing": "120%" + "type": "process", + "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.30_nozzle_0.6", + "from": "system", + "setting_id": "CBaL0vgwtgsd6Snj", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "elefant_foot_compensation": "0.15", + "sparse_infill_density": "25%", + "wall_loops": "4", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_width": "30", + "prime_volume": "68", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "prime_tower_brim_width": "5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_spacing": "120%" } diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index 47ac276acc..2232314d74 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,44 +1,34 @@ { - "type": "process", - "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.32", - "initial_layer_print_height": "0.4", - "bridge_flow": "0.7", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "iVRz2B0VBIBL1xVd", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "72", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "bridge_density": "70%", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.32_nozzle_0.8", + "from": "system", + "setting_id": "iVRz2B0VBIBL1xVd", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "72", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "bridge_density": "70%", + "bridge_flow": "0.7", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index ddd97a76c3..8adcb639d2 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.36", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "C0PiCFd3P222knX9", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "81", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.36_nozzle_0.6", + "from": "system", + "setting_id": "C0PiCFd3P222knX9", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "81", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index 24edfabf6d..d557315cdb 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,45 +1,35 @@ { - "type": "process", - "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.4", - "initial_layer_print_height": "0.4", - "bridge_flow": "0.8", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "VqkPgUtZi159BKpJ", - "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "90", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "bridge_density": "60%", - "enable_arc_fitting": "0", - "min_width_top_surface": "200%", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "40", - "support_type": "tree(auto)" + "type": "process", + "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.40_nozzle_0.8", + "from": "system", + "setting_id": "VqkPgUtZi159BKpJ", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "90", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "bridge_density": "60%", + "bridge_flow": "0.8", + "enable_arc_fitting": "0", + "min_width_top_surface": "200%", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "40", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index d65ba8e688..d3e4bf7f07 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.42", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "SVJzhQA3KQetRZmo", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "precise_z_height": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "95", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.42_nozzle_0.6", + "from": "system", + "setting_id": "SVJzhQA3KQetRZmo", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "95", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index 08e054619e..f0891c6a00 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,43 +1,32 @@ { - "type": "process", - "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.48", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "5H6JWChFEo3zqoHQ", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "108", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.48_nozzle_0.8", + "from": "system", + "setting_id": "5H6JWChFEo3zqoHQ", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "108", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index 86b571d1f5..817bd5c4dc 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,41 +1,31 @@ { - "type": "process", - "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.56", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "JZEIXOUT33c7MrZj", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "126", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.56_nozzle_0.8", + "from": "system", + "setting_id": "JZEIXOUT33c7MrZj", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "layer_height": "0.56", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "126", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "0", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json index 5d89a91866..72dab0c16b 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json @@ -33,7 +33,6 @@ "wall_loops": "2", "inner_wall_line_width": "0.45", "inner_wall_speed": "40", - "print_settings_id": "", "raft_layers": "0", "seam_position": "nearest", "skirt_distance": "2", diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json new file mode 100644 index 0000000000..240fd4f425 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.06_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.06", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.06", + "support_bottom_z_distance": "0.06" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json new file mode 100644 index 0000000000..41a824fa3a --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.08_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.08", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json new file mode 100644 index 0000000000..5ca58d7bd1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.10_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.1", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.1", + "support_bottom_z_distance": "0.1" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json new file mode 100644 index 0000000000..8c70dd9dee --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.12_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.12", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json new file mode 100644 index 0000000000..1ac42c9ffa --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.14_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.14", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.14", + "support_bottom_z_distance": "0.14" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json new file mode 100644 index 0000000000..f4725a73c7 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.18_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.18", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15", + "support_top_z_distance": "0.18", + "support_bottom_z_distance": "0.18" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json new file mode 100644 index 0000000000..a014a375b3 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.24_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json new file mode 100644 index 0000000000..e958e9a2ee --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.24_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json new file mode 100644 index 0000000000..a44a9ca05a --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.30_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.3", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json new file mode 100644 index 0000000000..67d9ecdb62 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.32_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.32", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json new file mode 100644 index 0000000000..314965b603 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.36_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.36", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json new file mode 100644 index 0000000000..ec19b56fa5 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.40_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.4", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json new file mode 100644 index 0000000000..18c1e7d79b --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.42_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.42", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json new file mode 100644 index 0000000000..8d5632b790 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.48_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.48", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json new file mode 100644 index 0000000000..7a5c92932d --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.56_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.56", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json index 93119a9370..40ea900ba2 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json @@ -7,7 +7,7 @@ "line_width": "0.62", "outer_wall_line_width": "0.62", "inner_wall_line_width": "0.62", - "initial_layer_line_width": "0.72", + "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "internal_solid_infill_line_width": "0.62", "support_line_width": "0.62", diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json index 0af8c229a7..1e48a622fa 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json @@ -13,8 +13,7 @@ "compatible_printers_condition": "", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", - "exclude_object": "1", + "enable_arc_fitting": "0", "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -68,11 +67,8 @@ "travel_speed": "500", "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", - "wipe_tower_cone_angle": "30", - "wipe_tower_wall_type": "rib", - "wipe_tower_extra_rib_length": "0", "prime_tower_width": "35", - "prime_volume": "30", "wall_generator": "arachne", - "compatible_printers": [] + "compatible_printers": [], + "exclude_object": "1" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_a400.json b/resources/profiles/Snapmaker/process/fdm_process_a400.json index 39e7565f0b..f8ca481f9f 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_a400.json +++ b/resources/profiles/Snapmaker/process/fdm_process_a400.json @@ -5,7 +5,7 @@ "from": "system", "instantiation": "false", "initial_layer_print_height": "0.2", - "enable_arc_fitting": "1", + "enable_arc_fitting": "0", "initial_layer_infill_speed": "75", "outer_wall_speed": "100", "inner_wall_speed": "160", diff --git a/resources/profiles/Snapmaker/process/fdm_process_idex.json b/resources/profiles/Snapmaker/process/fdm_process_idex.json index 7e04710bd3..6aeabfdaa7 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_idex.json +++ b/resources/profiles/Snapmaker/process/fdm_process_idex.json @@ -5,7 +5,7 @@ "from": "system", "instantiation": "false", "initial_layer_print_height": "0.2", - "enable_arc_fitting": "1", + "enable_arc_fitting": "0", "initial_layer_infill_speed": "75", "outer_wall_speed": "120", "inner_wall_speed": "250",