juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-09-16 13:32:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

Initial attempt to make speed configs multi-variant

Browse Source 
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
This commit is contained in:
Noisyfox
2026-05-21 09:04:27 +08:00
co-authored by chunmao.guo zhimin.zeng qing.zhang
parent e87b0d57b4
commit 1c8c7820c8
22 changed files with 648 additions and 512 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/libslic3r/Config.cpp
+26
View File
@@ -685,6 +685,32 @@ bool ConfigBase::set_deserialize_raw(const t_config_option_key &opt_key_src, con
return success; return success;
} }
double ConfigBase::get_abs_value_at(const t_config_option_key &opt_key, size_t index) const
{
const ConfigOption *raw_opt = this->option(opt_key);
assert(raw_opt != nullptr);
if (raw_opt->type() == coFloats) {
return static_cast<const ConfigOptionFloats*>(raw_opt)->get_at(index);
}
if (raw_opt->type() == coFloatsOrPercents) {
const ConfigDef *def = this->def();
if (def == nullptr) throw NoDefinitionException(opt_key);
const ConfigOptionDef *opt_def = def->get(opt_key);
assert(opt_def != nullptr);
if (opt_def->ratio_over.empty()) {
return 0;
} else {
const ConfigOption *ratio_opt = this->option(opt_def->ratio_over);
assert(ratio_opt->type() == coFloats);
const ConfigOptionFloats *ratio_values = static_cast<const ConfigOptionFloats *>(ratio_opt);
return static_cast<const ConfigOptionFloatsOrPercents *>(raw_opt)->get_at(index).get_abs_value(ratio_values->get_at(index));
}
}
throw ConfigurationError("ConfigBase::get_abs_value_at(): Not a valid option type for get_abs_value_at()");
}
// Return an absolute value of a possibly relative config variable. // Return an absolute value of a possibly relative config variable.
// For example, return absolute infill extrusion width, either from an absolute value, or relative to the layer height. // For example, return absolute infill extrusion width, either from an absolute value, or relative to the layer height.
double ConfigBase::get_abs_value(const t_config_option_key &opt_key) const double ConfigBase::get_abs_value(const t_config_option_key &opt_key) const
src/libslic3r/Config.hpp
+9 -2
View File
@@ -30,8 +30,14 @@
namespace Slic3r { namespace Slic3r {
struct FloatOrPercent struct FloatOrPercent
{ {
double value; double value = 0;
bool percent; bool percent = false;
FloatOrPercent() {}
FloatOrPercent(double value_, bool percent_) : value(value_), percent(percent_) { }
double get_abs_value(double ratio_over) const { return this->percent ? (ratio_over * this->value / 100) : this->value; }
private: private:
friend class cereal::access; friend class cereal::access;
template<class Archive> void serialize(Archive& ar) { ar(this->value); ar(this->percent); } template<class Archive> void serialize(Archive& ar) { ar(this->value); ar(this->percent); }
@@ -2726,6 +2732,7 @@ public:
void set_deserialize_strict(std::initializer_list<SetDeserializeItem> items) void set_deserialize_strict(std::initializer_list<SetDeserializeItem> items)
{ ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Disable }; this->set_deserialize(items, ctxt); } { ConfigSubstitutionContext ctxt{ ForwardCompatibilitySubstitutionRule::Disable }; this->set_deserialize(items, ctxt); }
double get_abs_value_at(const t_config_option_key &opt_key, size_t index) const;
double get_abs_value(const t_config_option_key &opt_key) const; double get_abs_value(const t_config_option_key &opt_key) const;
double get_abs_value(const t_config_option_key &opt_key, double ratio_over) const; double get_abs_value(const t_config_option_key &opt_key, double ratio_over) const;
void setenv_() const; void setenv_() const;
src/libslic3r/Fill/Fill.cpp
+3 -3
View File
@@ -957,11 +957,11 @@ std::vector<SurfaceFill> group_fills(const Layer &layer, LockRegionParam &lock_p
// record speed params // record speed params
if (!params.bridge) { if (!params.bridge) {
if (params.extrusion_role == erInternalInfill) if (params.extrusion_role == erInternalInfill)
params.sparse_infill_speed = region_config.sparse_infill_speed; params.sparse_infill_speed = region_config.sparse_infill_speed.get_at(layer.get_extruder_id(params.extruder));
else if (params.extrusion_role == erTopSolidInfill) { else if (params.extrusion_role == erTopSolidInfill) {
params.top_surface_speed = region_config.top_surface_speed; params.top_surface_speed = region_config.top_surface_speed.get_at(layer.get_extruder_id(params.extruder));
} else if (params.extrusion_role == erSolidInfill) } else if (params.extrusion_role == erSolidInfill)
params.solid_infill_speed = region_config.internal_solid_infill_speed; params.solid_infill_speed = region_config.internal_solid_infill_speed.get_at(layer.get_extruder_id(params.extruder));
} }
// Calculate flow spacing for infill pattern generation. // Calculate flow spacing for infill pattern generation.
if (surface.is_solid() || is_bridge) { if (surface.is_solid() || is_bridge) {
src/libslic3r/GCode.cpp
+117 -116
View File
@@ -515,7 +515,7 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
outer_wall_line_width = default_line_width == 0.0 ? filament_diameter : default_line_width; outer_wall_line_width = default_line_width == 0.0 ? filament_diameter : default_line_width;
} }
Flow outer_wall_flow = Flow(outer_wall_line_width, config.layer_height, config.nozzle_diameter.get_at(extruder_id)); Flow outer_wall_flow = Flow(outer_wall_line_width, config.layer_height, config.nozzle_diameter.get_at(extruder_id));
float outer_wall_speed = print.default_region_config().outer_wall_speed.value; float outer_wall_speed = print.default_region_config().outer_wall_speed.get_at(extruder_id);
outer_wall_volumetric_speed = outer_wall_speed * outer_wall_flow.mm3_per_mm(); outer_wall_volumetric_speed = outer_wall_speed * outer_wall_flow.mm3_per_mm();
if (outer_wall_volumetric_speed > filament_max_volumetric_speed) if (outer_wall_volumetric_speed > filament_max_volumetric_speed)
outer_wall_volumetric_speed = filament_max_volumetric_speed; outer_wall_volumetric_speed = filament_max_volumetric_speed;
@@ -1602,6 +1602,7 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
#define EXTRUDER_CONFIG(OPT) m_config.OPT.get_at(m_writer.filament()->extruder_id()) #define EXTRUDER_CONFIG(OPT) m_config.OPT.get_at(m_writer.filament()->extruder_id())
#define FILAMENT_CONFIG(OPT) m_config.OPT.get_at(m_writer.filament()->id()) #define FILAMENT_CONFIG(OPT) m_config.OPT.get_at(m_writer.filament()->id())
#define NOZZLE_CONFIG(OPT) m_config.OPT.get_at(cur_extruder_index())
void GCode::PlaceholderParserIntegration::reset() void GCode::PlaceholderParserIntegration::reset()
{ {
@@ -2772,11 +2773,11 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
print.throw_if_canceled(); print.throw_if_canceled();
m_cooling_buffer = make_unique<CoolingBuffer>(*this);
m_cooling_buffer->set_current_extruder(initial_extruder_id);
int extruder_id = get_extruder_id(initial_extruder_id); int extruder_id = get_extruder_id(initial_extruder_id);
m_cooling_buffer = make_unique<CoolingBuffer>(*this);
m_cooling_buffer->set_current_extruder(initial_extruder_id, extruder_id);
// Orca: Initialise AdaptivePA processor filter // Orca: Initialise AdaptivePA processor filter
m_pa_processor = std::make_unique<AdaptivePAProcessor>(*this, tool_ordering.all_extruders()); m_pa_processor = std::make_unique<AdaptivePAProcessor>(*this, tool_ordering.all_extruders());
@@ -3199,12 +3200,12 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
if (print.calib_params().mode == CalibMode::Calib_PA_Line) { if (print.calib_params().mode == CalibMode::Calib_PA_Line) {
std::string gcode; std::string gcode;
gcode += ";" + GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Layer_Change) + "\n"; gcode += ";" + GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Layer_Change) + "\n";
if ((print.default_object_config().outer_wall_acceleration.value > 0 && print.default_object_config().outer_wall_acceleration.value > 0)) { if ((NOZZLE_CONFIG(outer_wall_acceleration) > 0 && NOZZLE_CONFIG(outer_wall_acceleration) > 0)) {
gcode += m_writer.set_print_acceleration((unsigned int)floor(print.default_object_config().outer_wall_acceleration.value + 0.5)); gcode += m_writer.set_print_acceleration((unsigned int)floor(NOZZLE_CONFIG(outer_wall_acceleration) + 0.5));
} }
if (print.default_object_config().outer_wall_jerk.value > 0) { if (NOZZLE_CONFIG(outer_wall_jerk) > 0) {
double jerk = print.default_object_config().outer_wall_jerk.value; double jerk = NOZZLE_CONFIG(outer_wall_jerk);
gcode += m_writer.set_jerk_xy(jerk); gcode += m_writer.set_jerk_xy(jerk);
} }
@@ -3287,8 +3288,8 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
file.writeln(printing_by_object_gcode); file.writeln(printing_by_object_gcode);
} }
// Reset the cooling buffer internal state (the current position, feed rate, accelerations). // Reset the cooling buffer internal state (the current position, feed rate, accelerations).
m_cooling_buffer->set_current_extruder(initial_extruder_id, get_extruder_id(initial_extruder_id));
m_cooling_buffer->reset(this->writer().get_position()); m_cooling_buffer->reset(this->writer().get_position());
m_cooling_buffer->set_current_extruder(initial_extruder_id);
// Process all layers of a single object instance (sequential mode) with a parallel pipeline: // Process all layers of a single object instance (sequential mode) with a parallel pipeline:
// Generate G-code, run the filters (vase mode, cooling buffer), run the G-code analyser // Generate G-code, run the filters (vase mode, cooling buffer), run the G-code analyser
// and export G-code into file. // and export G-code into file.
@@ -4384,10 +4385,10 @@ std::string GCode::generate_skirt(const Print &print,
if (first_layer && i==loops.first) { if (first_layer && i==loops.first) {
//set skirt start point location //set skirt start point location
const Point desired_start_point = Skirt::find_start_point(loop, skirt_start_angle); const Point desired_start_point = Skirt::find_start_point(loop, skirt_start_angle);
gcode += this->extrude_loop(loop, "skirt", m_config.support_speed.value, {}, &desired_start_point); gcode += this->extrude_loop(loop, "skirt", NOZZLE_CONFIG(support_speed), {}, &desired_start_point);
} }
else else
gcode += this->extrude_loop(loop, "skirt", m_config.support_speed.value); gcode += this->extrude_loop(loop, "skirt", NOZZLE_CONFIG(support_speed));
// If we only want a single wall on non-first layers, break now // If we only want a single wall on non-first layers, break now
if (!first_layer && print.m_config.single_loop_draft_shield) { if (!first_layer && print.m_config.single_loop_draft_shield) {
@@ -4634,16 +4635,16 @@ LayerResult GCode::process_layer(
//BBS //BBS
if (first_layer) { if (first_layer) {
// Orca: we don't need to optimize the Klipper as only set once // Orca: we don't need to optimize the Klipper as only set once
if (m_config.default_acceleration.value > 0 && m_config.initial_layer_acceleration.value > 0) { if (NOZZLE_CONFIG(default_acceleration) > 0 && NOZZLE_CONFIG(initial_layer_acceleration) > 0) {
gcode += m_writer.set_print_acceleration((unsigned int)floor(m_config.initial_layer_acceleration.value + 0.5)); gcode += m_writer.set_print_acceleration((unsigned int)floor(NOZZLE_CONFIG(initial_layer_acceleration) + 0.5));
} }
if (m_config.default_jerk.value > 0 && m_config.initial_layer_jerk.value > 0) { if (NOZZLE_CONFIG(default_jerk) > 0 && NOZZLE_CONFIG(initial_layer_jerk) > 0) {
gcode += m_writer.set_jerk_xy(m_config.initial_layer_jerk.value); gcode += m_writer.set_jerk_xy(NOZZLE_CONFIG(initial_layer_jerk));
} }
if (m_writer.get_gcode_flavor() == gcfMarlinFirmware && m_config.default_junction_deviation.value > 0) { if (m_writer.get_gcode_flavor() == gcfMarlinFirmware && NOZZLE_CONFIG(default_junction_deviation) > 0) {
gcode += m_writer.set_junction_deviation(m_config.default_junction_deviation.value); gcode += m_writer.set_junction_deviation(NOZZLE_CONFIG(default_junction_deviation));
} }
} }
@@ -4664,12 +4665,12 @@ LayerResult GCode::process_layer(
} }
// Reset acceleration at sencond layer // Reset acceleration at sencond layer
// Orca: only set once, don't need to call set_accel_and_jerk // Orca: only set once, don't need to call set_accel_and_jerk
if (m_config.default_acceleration.value > 0 && m_config.initial_layer_acceleration.value > 0) { if (NOZZLE_CONFIG(default_acceleration) > 0 && NOZZLE_CONFIG(initial_layer_acceleration) > 0) {
gcode += m_writer.set_print_acceleration((unsigned int) floor(m_config.default_acceleration.value + 0.5)); gcode += m_writer.set_print_acceleration((unsigned int) floor(NOZZLE_CONFIG(default_acceleration) + 0.5));
} }
if (m_config.default_jerk.value > 0 && m_config.initial_layer_jerk.value > 0) { if (NOZZLE_CONFIG(default_jerk) > 0 && NOZZLE_CONFIG(initial_layer_jerk) > 0) {
gcode += m_writer.set_jerk_xy(m_config.default_jerk.value); gcode += m_writer.set_jerk_xy(NOZZLE_CONFIG(default_jerk));
} }
// Transition from 1st to 2nd layer. Adjust nozzle temperatures as prescribed by the nozzle dependent // Transition from 1st to 2nd layer. Adjust nozzle temperatures as prescribed by the nozzle dependent
@@ -4724,8 +4725,8 @@ LayerResult GCode::process_layer(
for (const auto &layer_to_print : layers) { for (const auto &layer_to_print : layers) {
if (layer_to_print.object_layer) { if (layer_to_print.object_layer) {
const auto& regions = layer_to_print.object_layer->regions(); const auto& regions = layer_to_print.object_layer->regions();
const bool enable_overhang_speed = std::any_of(regions.begin(), regions.end(), [](const LayerRegion* r) { const bool enable_overhang_speed = std::any_of(regions.begin(), regions.end(), [this](const LayerRegion* r) {
return r->has_extrusions() && r->region().config().enable_overhang_speed; return r->has_extrusions() && r->region().config().enable_overhang_speed.get_at(cur_extruder_index());
}); });
if (enable_overhang_speed) { if (enable_overhang_speed) {
m_extrusion_quality_estimator.prepare_for_new_layer(layer_to_print.original_object, m_extrusion_quality_estimator.prepare_for_new_layer(layer_to_print.original_object,
@@ -5106,7 +5107,7 @@ LayerResult GCode::process_layer(
this->set_origin(0., 0.); this->set_origin(0., 0.);
for (const ExtrusionEntity* ee : it->second.entities) for (const ExtrusionEntity* ee : it->second.entities)
if (ee != nullptr) if (ee != nullptr)
gcode += this->extrude_entity(*ee, "brim", m_config.support_speed.value); gcode += this->extrude_entity(*ee, "brim", NOZZLE_CONFIG(support_speed));
// Mark brim as printed for this object to avoid per-object brim emission later. // Mark brim as printed for this object to avoid per-object brim emission later.
this->m_objsWithBrim.erase(unified_object_id); this->m_objsWithBrim.erase(unified_object_id);
@@ -5317,7 +5318,7 @@ LayerResult GCode::process_layer(
this->set_origin(0., 0.); this->set_origin(0., 0.);
m_avoid_crossing_perimeters.use_external_mp(); m_avoid_crossing_perimeters.use_external_mp();
for (const ExtrusionEntity* ee : print.m_supportBrimMap.at(instance_to_print.print_object.id()).entities) { for (const ExtrusionEntity* ee : print.m_supportBrimMap.at(instance_to_print.print_object.id()).entities) {
gcode += this->extrude_entity(*ee, "brim", m_config.support_speed.value); gcode += this->extrude_entity(*ee, "brim", NOZZLE_CONFIG(support_speed));
} }
m_avoid_crossing_perimeters.use_external_mp(false); m_avoid_crossing_perimeters.use_external_mp(false);
// Allow a straight travel move to the first object point. // Allow a straight travel move to the first object point.
@@ -5364,7 +5365,7 @@ LayerResult GCode::process_layer(
this->set_origin(0., 0.); this->set_origin(0., 0.);
m_avoid_crossing_perimeters.use_external_mp(); m_avoid_crossing_perimeters.use_external_mp();
for (const ExtrusionEntity* ee : print.m_brimMap.at(instance_to_print.print_object.id()).entities) { for (const ExtrusionEntity* ee : print.m_brimMap.at(instance_to_print.print_object.id()).entities) {
gcode += this->extrude_entity(*ee, "brim", m_config.support_speed.value); gcode += this->extrude_entity(*ee, "brim", NOZZLE_CONFIG(support_speed));
} }
m_avoid_crossing_perimeters.use_external_mp(false); m_avoid_crossing_perimeters.use_external_mp(false);
// Allow a straight travel move to the first object point. // Allow a straight travel move to the first object point.
@@ -5742,11 +5743,11 @@ std::string GCode::extrude_loop(const ExtrusionLoop& loop_ref,
// SoftFever: check loop lenght for small perimeter. // SoftFever: check loop lenght for small perimeter.
double small_peri_speed = -1; double small_peri_speed = -1;
if (speed == -1 && loop.length() <= SMALL_PERIMETER_LENGTH(m_config.small_perimeter_threshold.value)) { if (speed == -1 && loop.length() <= SMALL_PERIMETER_LENGTH(NOZZLE_CONFIG(small_perimeter_threshold))) {
if(m_config.small_perimeter_speed == 0) if(NOZZLE_CONFIG(small_perimeter_speed).value == 0)
small_peri_speed = m_config.outer_wall_speed * 0.5; small_peri_speed = NOZZLE_CONFIG(outer_wall_speed) * 0.5;
else else
small_peri_speed = m_config.small_perimeter_speed.get_abs_value(m_config.outer_wall_speed); small_peri_speed = NOZZLE_CONFIG(small_perimeter_speed).get_abs_value(NOZZLE_CONFIG(outer_wall_speed));
} }
// extrude along the path // extrude along the path
@@ -6128,8 +6129,8 @@ std::string GCode::extrude_support(const ExtrusionEntityCollection &support_fill
chain_and_reorder_extrusion_entities(extrusions, m_last_pos.to_point()); chain_and_reorder_extrusion_entities(extrusions, m_last_pos.to_point());
const double support_speed = m_config.support_speed.value; //const double support_speed = m_config.support_speed.value;
const double support_interface_speed = m_config.get_abs_value("support_interface_speed"); //const double support_interface_speed = m_config.get_abs_value("support_interface_speed");
for (const ExtrusionEntity *ee : extrusions) { for (const ExtrusionEntity *ee : extrusions) {
ExtrusionRole role = ee->role(); ExtrusionRole role = ee->role();
assert(role == erSupportMaterial || role == erSupportMaterialInterface || role == erSupportTransition || role == erIroning); assert(role == erSupportMaterial || role == erSupportMaterialInterface || role == erSupportTransition || role == erIroning);
@@ -6340,47 +6341,47 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
unsigned int acceleration_i = 0; unsigned int acceleration_i = 0;
double jerk = 0; double jerk = 0;
// adjust acceleration // adjust acceleration
if (m_config.default_acceleration.value > 0) { if (NOZZLE_CONFIG(default_acceleration) > 0) {
double acceleration; double acceleration;
if (this->on_first_layer() && m_config.initial_layer_acceleration.value > 0) { if (this->on_first_layer() && NOZZLE_CONFIG(initial_layer_acceleration) > 0) {
acceleration = m_config.initial_layer_acceleration.value; acceleration = NOZZLE_CONFIG(initial_layer_acceleration);
#if 0 #if 0
} else if (this->object_layer_over_raft() && m_config.first_layer_acceleration_over_raft.value > 0) { } else if (this->object_layer_over_raft() && m_config.first_layer_acceleration_over_raft.value > 0) {
acceleration = m_config.first_layer_acceleration_over_raft.value; acceleration = m_config.first_layer_acceleration_over_raft.value;
#endif #endif
} else if (m_config.get_abs_value("bridge_acceleration") > 0 && is_bridge(path.role())) { } else if (m_config.get_abs_value_at("bridge_acceleration", cur_extruder_index()) > 0 && is_bridge(path.role())) {
acceleration = m_config.get_abs_value("bridge_acceleration"); acceleration = m_config.get_abs_value_at("bridge_acceleration", cur_extruder_index());
} else if (m_config.get_abs_value("sparse_infill_acceleration") > 0 && (path.role() == erInternalInfill)) { } else if (m_config.get_abs_value_at("sparse_infill_acceleration", cur_extruder_index()) > 0 && (path.role() == erInternalInfill)) {
acceleration = m_config.get_abs_value("sparse_infill_acceleration"); acceleration = m_config.get_abs_value_at("sparse_infill_acceleration", cur_extruder_index());
} else if (m_config.get_abs_value("internal_solid_infill_acceleration") > 0 && (path.role() == erSolidInfill)) { } else if (m_config.get_abs_value_at("internal_solid_infill_acceleration", cur_extruder_index()) > 0 && (path.role() == erSolidInfill)) {
acceleration = m_config.get_abs_value("internal_solid_infill_acceleration"); acceleration = m_config.get_abs_value_at("internal_solid_infill_acceleration", cur_extruder_index());
} else if (m_config.outer_wall_acceleration.value > 0 && is_external_perimeter(path.role())) { } else if (NOZZLE_CONFIG(outer_wall_acceleration) > 0 && is_external_perimeter(path.role())) {
acceleration = m_config.outer_wall_acceleration.value; acceleration = NOZZLE_CONFIG(outer_wall_acceleration);
} else if (m_config.inner_wall_acceleration.value > 0 && is_internal_perimeter(path.role())) { } else if (NOZZLE_CONFIG(inner_wall_acceleration) > 0 && is_internal_perimeter(path.role())) {
acceleration = m_config.inner_wall_acceleration.value; acceleration = NOZZLE_CONFIG(inner_wall_acceleration);
} else if (m_config.top_surface_acceleration.value > 0 && is_top_surface(path.role())) { } else if (NOZZLE_CONFIG(top_surface_acceleration) > 0 && is_top_surface(path.role())) {
acceleration = m_config.top_surface_acceleration.value; acceleration = NOZZLE_CONFIG(top_surface_acceleration);
} else { } else {
acceleration = m_config.default_acceleration.value; acceleration = NOZZLE_CONFIG(default_acceleration);
} }
acceleration_i = (unsigned int)floor(acceleration + 0.5); acceleration_i = (unsigned int)floor(acceleration + 0.5);
} }
// adjust X Y jerk // adjust X Y jerk
if (m_config.default_jerk.value > 0) { if (NOZZLE_CONFIG(default_jerk) > 0) {
if (this->on_first_layer() && m_config.initial_layer_jerk.value > 0) { if (this->on_first_layer() && NOZZLE_CONFIG(initial_layer_jerk) > 0) {
jerk = m_config.initial_layer_jerk.value; jerk = NOZZLE_CONFIG(initial_layer_jerk);
} else if (m_config.outer_wall_jerk.value > 0 && is_external_perimeter(path.role())) { } else if (NOZZLE_CONFIG(outer_wall_jerk) > 0 && is_external_perimeter(path.role())) {
jerk = m_config.outer_wall_jerk.value; jerk = NOZZLE_CONFIG(outer_wall_jerk);
} else if (m_config.inner_wall_jerk.value > 0 && is_internal_perimeter(path.role())) { } else if (NOZZLE_CONFIG(inner_wall_jerk) > 0 && is_internal_perimeter(path.role())) {
jerk = m_config.inner_wall_jerk.value; jerk = NOZZLE_CONFIG(inner_wall_jerk);
} else if (m_config.top_surface_jerk.value > 0 && is_top_surface(path.role())) { } else if (NOZZLE_CONFIG(top_surface_jerk) > 0 && is_top_surface(path.role())) {
jerk = m_config.top_surface_jerk.value; jerk = NOZZLE_CONFIG(top_surface_jerk);
} else if (m_config.infill_jerk.value > 0 && is_infill(path.role())) { } else if (NOZZLE_CONFIG(infill_jerk) > 0 && is_infill(path.role())) {
jerk = m_config.infill_jerk.value; jerk = NOZZLE_CONFIG(infill_jerk);
} }
else { else {
jerk = m_config.default_jerk.value; jerk = NOZZLE_CONFIG(default_jerk);
} }
} }
@@ -6443,37 +6444,37 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
// set speed // set speed
if (speed == -1) { if (speed == -1) {
if (path.role() == erPerimeter) { if (path.role() == erPerimeter) {
speed = m_config.inner_wall_speed.get_at(cur_extruder_index()); speed = NOZZLE_CONFIG(inner_wall_speed);
if (sloped) { if (sloped) {
speed = std::min(speed, m_config.scarf_joint_speed.get_abs_value(speed)); speed = std::min(speed, m_config.scarf_joint_speed.get_abs_value(speed));
} }
} else if (path.role() == erExternalPerimeter) { } else if (path.role() == erExternalPerimeter) {
speed = m_config.get_abs_value("outer_wall_speed"); speed = NOZZLE_CONFIG(outer_wall_speed);
if (sloped) { if (sloped) {
speed = std::min(speed, m_config.scarf_joint_speed.get_abs_value(speed)); speed = std::min(speed, m_config.scarf_joint_speed.get_abs_value(speed));
} }
} }
else if(path.role() == erInternalBridgeInfill) { else if(path.role() == erInternalBridgeInfill) {
speed = m_config.get_abs_value("internal_bridge_speed"); speed = m_config.get_abs_value_at("internal_bridge_speed", cur_extruder_index());
} else if (path.role() == erOverhangPerimeter || path.role() == erSupportTransition || path.role() == erBridgeInfill) { } else if (path.role() == erOverhangPerimeter || path.role() == erSupportTransition || path.role() == erBridgeInfill) {
speed = m_config.get_abs_value("bridge_speed"); speed = NOZZLE_CONFIG(bridge_speed);
} else if (path.role() == erInternalInfill) { } else if (path.role() == erInternalInfill) {
speed = m_config.get_abs_value("sparse_infill_speed"); speed = NOZZLE_CONFIG(sparse_infill_speed);
} else if (path.role() == erSolidInfill) { } else if (path.role() == erSolidInfill) {
speed = m_config.get_abs_value("internal_solid_infill_speed"); speed = NOZZLE_CONFIG(internal_solid_infill_speed);
} else if (path.role() == erTopSolidInfill) { } else if (path.role() == erTopSolidInfill) {
speed = m_config.get_abs_value("top_surface_speed"); speed = NOZZLE_CONFIG(top_surface_speed);
} else if (path.role() == erIroning) { } else if (path.role() == erIroning) {
speed = m_config.get_abs_value("ironing_speed"); speed = m_config.get_abs_value("ironing_speed");
} else if (path.role() == erBottomSurface) { } else if (path.role() == erBottomSurface) {
speed = m_config.get_abs_value("initial_layer_infill_speed"); speed = NOZZLE_CONFIG(initial_layer_infill_speed);
} else if (path.role() == erGapFill) { } else if (path.role() == erGapFill) {
speed = m_config.get_abs_value("gap_infill_speed"); speed = NOZZLE_CONFIG(gap_infill_speed);
} }
else if (path.role() == erSupportMaterial || else if (path.role() == erSupportMaterial ||
path.role() == erSupportMaterialInterface) { path.role() == erSupportMaterialInterface) {
const double support_speed = m_config.support_speed.value; const double support_speed = NOZZLE_CONFIG(support_speed);
const double support_interface_speed = m_config.get_abs_value("support_interface_speed"); const double support_interface_speed = NOZZLE_CONFIG(support_interface_speed);
speed = (path.role() == erSupportMaterial) ? support_speed : support_interface_speed; speed = (path.role() == erSupportMaterial) ? support_speed : support_interface_speed;
} else { } else {
throw Slic3r::InvalidArgument("Invalid speed"); throw Slic3r::InvalidArgument("Invalid speed");
@@ -6494,16 +6495,16 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
//BBS: for solid infill of first layer, speed can be higher as long as //BBS: for solid infill of first layer, speed can be higher as long as
//wall lines have be attached //wall lines have be attached
if (path.role() != erBottomSurface) { if (path.role() != erBottomSurface) {
speed = is_perimeter(path.role()) ? m_config.get_abs_value("initial_layer_speed") : speed = is_perimeter(path.role()) ? NOZZLE_CONFIG(initial_layer_speed) :
m_config.get_abs_value("initial_layer_infill_speed"); NOZZLE_CONFIG(initial_layer_infill_speed);
} }
} else if (m_config.slow_down_layers > 1 && m_config.raft_layers == 0) { } else if (m_config.slow_down_layers > 1 && m_config.raft_layers == 0) {
if (_layer > 0 && _layer < m_config.slow_down_layers) { if (_layer > 0 && _layer < m_config.slow_down_layers) {
const auto first_layer_speed = const auto first_layer_speed =
is_perimeter(path.role()) is_perimeter(path.role())
? m_config.get_abs_value("initial_layer_speed") ? NOZZLE_CONFIG(initial_layer_speed)
: m_config.get_abs_value("initial_layer_infill_speed"); : NOZZLE_CONFIG(initial_layer_infill_speed);
if (first_layer_speed < speed) { if (first_layer_speed < speed) {
speed = std::min( speed = std::min(
speed, speed,
@@ -6515,8 +6516,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
if (_layer > m_config.raft_layers && (_layer - m_config.raft_layers) < m_config.slow_down_layers) { if (_layer > m_config.raft_layers && (_layer - m_config.raft_layers) < m_config.slow_down_layers) {
const auto first_layer_speed const auto first_layer_speed
= is_perimeter(path.role()) ? m_config.get_abs_value("initial_layer_speed") : = is_perimeter(path.role()) ? NOZZLE_CONFIG(initial_layer_speed) :
m_config.get_abs_value("initial_layer_infill_speed"); NOZZLE_CONFIG(initial_layer_infill_speed);
if (first_layer_speed < speed) { if (first_layer_speed < speed) {
speed = std::min(speed, Slic3r::lerp(first_layer_speed, speed, speed = std::min(speed, Slic3r::lerp(first_layer_speed, speed,
(double) (_layer - m_config.raft_layers) / m_config.slow_down_layers)); (double) (_layer - m_config.raft_layers) / m_config.slow_down_layers));
@@ -6582,10 +6583,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
bool variable_speed = false; bool variable_speed = false;
std::vector<ProcessedPoint> new_points {}; std::vector<ProcessedPoint> new_points {};
if (m_config.enable_overhang_speed && !this->on_first_layer() && !object_layer_over_raft() && if (NOZZLE_CONFIG(enable_overhang_speed) && !this->on_first_layer() && !object_layer_over_raft() &&
(is_bridge(path.role()) || is_perimeter(path.role()))) { (is_bridge(path.role()) || is_perimeter(path.role()))) {
bool is_external = is_external_perimeter(path.role()); bool is_external = is_external_perimeter(path.role());
double ref_speed = is_external ? m_config.get_abs_value("outer_wall_speed") : m_config.inner_wall_speed.get_at(cur_extruder_index()); double ref_speed = is_external ? NOZZLE_CONFIG(outer_wall_speed) : NOZZLE_CONFIG(inner_wall_speed);
if (ref_speed == 0) if (ref_speed == 0)
ref_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm; ref_speed = FILAMENT_CONFIG(filament_max_volumetric_speed) / _mm3_per_mm;
@@ -6598,46 +6599,46 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
ConfigOptionPercents overhang_overlap_levels({90, 75, 50, 25, 13, 0}); ConfigOptionPercents overhang_overlap_levels({90, 75, 50, 25, 13, 0});
if (m_config.slowdown_for_curled_perimeters){ if (NOZZLE_CONFIG(slowdown_for_curled_perimeters)){
ConfigOptionFloatsOrPercents dynamic_overhang_speeds( ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
{FloatOrPercent{100, true}, {FloatOrPercent{100, true},
(m_config.get_abs_value("overhang_1_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_1_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_1_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_1_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_2_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_2_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_2_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_2_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_3_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_3_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_3_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_3_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_4_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_4_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_4_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_4_4_speed", ref_speed) * 100 / ref_speed, true}}); FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true}});
new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds, new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
ref_speed, speed, m_config.slowdown_for_curled_perimeters); ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
}else{ }else{
ConfigOptionFloatsOrPercents dynamic_overhang_speeds( ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
{FloatOrPercent{100, true}, {FloatOrPercent{100, true},
(m_config.get_abs_value("overhang_1_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_1_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_1_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_1_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_2_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_2_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_2_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_2_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_3_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_3_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_3_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_3_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
(m_config.get_abs_value("overhang_4_4_speed", ref_speed) < 0.5) ? (NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) < 0.5) ?
FloatOrPercent{100, true} : FloatOrPercent{100, true} :
FloatOrPercent{m_config.get_abs_value("overhang_4_4_speed", ref_speed) * 100 / ref_speed, true}, FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true},
FloatOrPercent{m_config.get_abs_value("bridge_speed") * 100 / ref_speed, true}}); FloatOrPercent{NOZZLE_CONFIG(bridge_speed) * 100 / ref_speed, true}});
new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds, new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
ref_speed, speed, m_config.slowdown_for_curled_perimeters); ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
} }
variable_speed = std::any_of(new_points.begin(), new_points.end(), variable_speed = std::any_of(new_points.begin(), new_points.end(),
[speed](const ProcessedPoint &p) { return fabs(double(p.speed) - speed) > 1; }); // Ignore small speed variations (under 1mm/sec) [speed](const ProcessedPoint &p) { return fabs(double(p.speed) - speed) > 1; }); // Ignore small speed variations (under 1mm/sec)
@@ -7296,40 +7297,40 @@ std::string GCode::travel_to(const Point& point, ExtrusionRole role, std::string
unsigned int acceleration_to_set = 0; unsigned int acceleration_to_set = 0;
if (this->on_first_layer()) { if (this->on_first_layer()) {
unsigned int initial_layer_travel_acceleration = m_config.get_abs_value("initial_layer_travel_acceleration"); unsigned int initial_layer_travel_acceleration = m_config.get_abs_value_at("initial_layer_travel_acceleration", cur_extruder_index());
double initial_layer_travel_jerk = m_config.get_abs_value("initial_layer_travel_jerk"); double initial_layer_travel_jerk = m_config.get_abs_value_at("initial_layer_travel_jerk", cur_extruder_index());
if (m_config.default_acceleration.value > 0 && initial_layer_travel_acceleration > 0) { if (NOZZLE_CONFIG(default_acceleration) > 0 && initial_layer_travel_acceleration > 0) {
acceleration_to_set = (unsigned int) floor(initial_layer_travel_acceleration + 0.5); acceleration_to_set = (unsigned int) floor(initial_layer_travel_acceleration + 0.5);
} }
if (m_config.default_jerk.value > 0 && initial_layer_travel_jerk > 0) { if (NOZZLE_CONFIG(default_jerk)> 0 && initial_layer_travel_jerk > 0) {
jerk_to_set = initial_layer_travel_jerk; jerk_to_set = initial_layer_travel_jerk;
} }
} else { // ORCA: Handle short-travel acceleration and jerk for outer perimeters (if applicable) } else { // ORCA: Handle short-travel acceleration and jerk for outer perimeters (if applicable)
const bool is_short_travel = travel.length() < scale_(EXTRUDER_CONFIG(retraction_minimum_travel)); const bool is_short_travel = travel.length() < scale_(EXTRUDER_CONFIG(retraction_minimum_travel));
if (m_config.default_acceleration.value > 0) { if (NOZZLE_CONFIG(default_acceleration) > 0) {
if (role == erOverhangPerimeter && is_short_travel) { if (role == erOverhangPerimeter && is_short_travel) {
const double bridge_acceleration = m_config.get_abs_value("bridge_acceleration"); const double bridge_acceleration = m_config.get_abs_value_at("bridge_acceleration", cur_extruder_index());
if (bridge_acceleration > 0) if (bridge_acceleration > 0)
acceleration_to_set = (unsigned int) floor(bridge_acceleration + 0.5); acceleration_to_set = (unsigned int) floor(bridge_acceleration + 0.5);
} else if (role == erExternalPerimeter && is_short_travel) { } else if (role == erExternalPerimeter && is_short_travel) {
if (m_config.outer_wall_acceleration.value > 0) if (NOZZLE_CONFIG(outer_wall_acceleration) > 0)
acceleration_to_set = (unsigned int) floor(m_config.outer_wall_acceleration.value + 0.5); acceleration_to_set = (unsigned int) floor(NOZZLE_CONFIG(outer_wall_acceleration) + 0.5);
} else { } else {
if (m_config.travel_acceleration.value > 0) if (NOZZLE_CONFIG(travel_acceleration) > 0)
acceleration_to_set = (unsigned int) floor(m_config.travel_acceleration.value + 0.5); acceleration_to_set = (unsigned int) floor(NOZZLE_CONFIG(travel_acceleration) + 0.5);
} }
} }
if (m_config.default_jerk.value > 0) { if (NOZZLE_CONFIG(default_jerk) > 0) {
if ((role == erExternalPerimeter || role == erOverhangPerimeter) && is_short_travel) { if ((role == erExternalPerimeter || role == erOverhangPerimeter) && is_short_travel) {
if (m_config.outer_wall_jerk.value > 0) if (NOZZLE_CONFIG(outer_wall_jerk) > 0)
jerk_to_set = m_config.outer_wall_jerk.value; jerk_to_set = NOZZLE_CONFIG(outer_wall_jerk);
} else { } else {
if (m_config.travel_jerk.value > 0) if (NOZZLE_CONFIG(travel_jerk) > 0)
jerk_to_set = m_config.travel_jerk.value; jerk_to_set = NOZZLE_CONFIG(travel_jerk);
} }
} }
} }
src/libslic3r/GCode/CoolingBuffer.cpp
+2 -2
View File
@@ -18,7 +18,7 @@
namespace Slic3r { namespace Slic3r {
CoolingBuffer::CoolingBuffer(GCode &gcodegen) : m_config(gcodegen.config()), m_toolchange_prefix(gcodegen.writer().toolchange_prefix()), m_current_extruder(0) CoolingBuffer::CoolingBuffer(GCode &gcodegen) : m_config(gcodegen.config()), m_toolchange_prefix(gcodegen.writer().toolchange_prefix()), m_current_extruder(0), m_current_nozzle(0)
{ {
this->reset(gcodegen.writer().get_position()); this->reset(gcodegen.writer().get_position());
@@ -37,7 +37,7 @@ void CoolingBuffer::reset(const Vec3d &position)
m_current_pos[0] = float(position.x()); m_current_pos[0] = float(position.x());
m_current_pos[1] = float(position.y()); m_current_pos[1] = float(position.y());
m_current_pos[2] = float(position.z()); m_current_pos[2] = float(position.z());
m_current_pos[4] = float(m_config.travel_speed.value); m_current_pos[4] = float(m_config.travel_speed.get_at(m_current_nozzle));
m_fan_speed = -1; m_fan_speed = -1;
m_additional_fan_speed = -1; m_additional_fan_speed = -1;
m_current_fan_speed = -1; m_current_fan_speed = -1;
src/libslic3r/GCode/CoolingBuffer.hpp
+2 -1
View File
@@ -25,7 +25,7 @@ class CoolingBuffer {
public: public:
CoolingBuffer(GCode &gcodegen); CoolingBuffer(GCode &gcodegen);
void reset(const Vec3d &position); void reset(const Vec3d &position);
void set_current_extruder(unsigned int extruder_id) { m_current_extruder = extruder_id; } void set_current_extruder(unsigned int extruder_id, unsigned int nozzle_id) { m_current_extruder = extruder_id; m_current_nozzle = nozzle_id; }
std::string process_layer(std::string &&gcode, size_t layer_id, bool flush); std::string process_layer(std::string &&gcode, size_t layer_id, bool flush);
private: private:
@@ -55,6 +55,7 @@ private:
// the PrintConfig slice of FullPrintConfig is constant, thus no thread synchronization is required. // the PrintConfig slice of FullPrintConfig is constant, thus no thread synchronization is required.
const PrintConfig &m_config; const PrintConfig &m_config;
unsigned int m_current_extruder; unsigned int m_current_extruder;
unsigned int m_current_nozzle;
//BBS: current fan speed //BBS: current fan speed
int m_current_fan_speed; int m_current_fan_speed;
}; };
src/libslic3r/GCode/WipeTower.cpp
+2 -2
View File
@@ -1472,7 +1472,7 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
m_bridging(10.f), m_bridging(10.f),
m_no_sparse_layers(config.wipe_tower_no_sparse_layers), m_no_sparse_layers(config.wipe_tower_no_sparse_layers),
m_gcode_flavor(config.gcode_flavor), m_gcode_flavor(config.gcode_flavor),
m_travel_speed(config.travel_speed), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
m_current_tool(initial_tool), m_current_tool(initial_tool),
//wipe_volumes(flush_matrix) //wipe_volumes(flush_matrix)
m_enable_timelapse_print(config.timelapse_type.value == TimelapseType::tlSmooth), m_enable_timelapse_print(config.timelapse_type.value == TimelapseType::tlSmooth),
@@ -1497,7 +1497,7 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi
// it is taken over following default. Speeds from config are not // it is taken over following default. Speeds from config are not
// easily accessible here. // easily accessible here.
const float default_speed = 60.f; const float default_speed = 60.f;
m_first_layer_speed = config.get_abs_value("initial_layer_speed"); m_first_layer_speed = config.initial_layer_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool));
if (m_first_layer_speed == 0.f) // just to make sure autospeed doesn't break it. if (m_first_layer_speed == 0.f) // just to make sure autospeed doesn't break it.
m_first_layer_speed = default_speed / 2.f; m_first_layer_speed = default_speed / 2.f;
src/libslic3r/GCode/WipeTower2.cpp
+3 -3
View File
@@ -1262,8 +1262,8 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau
m_bridging(float(config.wipe_tower_bridging)), m_bridging(float(config.wipe_tower_bridging)),
m_no_sparse_layers(config.wipe_tower_no_sparse_layers), m_no_sparse_layers(config.wipe_tower_no_sparse_layers),
m_gcode_flavor(config.gcode_flavor), m_gcode_flavor(config.gcode_flavor),
m_travel_speed(config.travel_speed), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
m_infill_speed(default_region_config.sparse_infill_speed), m_infill_speed(default_region_config.sparse_infill_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
m_perimeter_speed(default_region_config.inner_wall_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), m_perimeter_speed(default_region_config.inner_wall_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))),
m_current_tool(initial_tool), m_current_tool(initial_tool),
wipe_volumes(wiping_matrix), m_wipe_tower_max_purge_speed(float(config.wipe_tower_max_purge_speed)), wipe_volumes(wiping_matrix), m_wipe_tower_max_purge_speed(float(config.wipe_tower_max_purge_speed)),
@@ -1280,7 +1280,7 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau
// it is taken over following default. Speeds from config are not // it is taken over following default. Speeds from config are not
// easily accessible here. // easily accessible here.
const float default_speed = 60.f; const float default_speed = 60.f;
m_first_layer_speed = config.initial_layer_speed; m_first_layer_speed = config.initial_layer_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool));
if (m_first_layer_speed == 0.f) // just to make sure autospeed doesn't break it. if (m_first_layer_speed == 0.f) // just to make sure autospeed doesn't break it.
m_first_layer_speed = default_speed / 2.f; m_first_layer_speed = default_speed / 2.f;
src/libslic3r/GCodeWriter.cpp
+10 -10
View File
@@ -610,7 +610,7 @@ std::string GCodeWriter::travel_to_xy(const Vec2d &point, const std::string &com
GCodeG1Formatter w; GCodeG1Formatter w;
w.emit_xy(point_on_plate); w.emit_xy(point_on_plate);
auto speed = m_is_first_layer auto speed = m_is_first_layer
? this->config.get_abs_value("initial_layer_travel_speed") : this->config.travel_speed.value; ? this->config.get_abs_value_at("initial_layer_travel_speed", get_extruder_index(this->config, filament()->id())) : this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id()));
w.emit_f(speed * 60.0); w.emit_f(speed * 60.0);
//BBS //BBS
w.emit_comment(GCodeWriter::full_gcode_comment, comment); w.emit_comment(GCodeWriter::full_gcode_comment, comment);
@@ -696,7 +696,7 @@ std::string GCodeWriter::travel_to_xyz(const Vec3d &point, const std::string &co
// BBS // BBS
Vec3d dest_point = point; Vec3d dest_point = point;
auto travel_speed = auto travel_speed =
m_is_first_layer ? this->config.get_abs_value("initial_layer_travel_speed") : this->config.travel_speed.value; m_is_first_layer ? this->config.get_abs_value_at("initial_layer_travel_speed", get_extruder_index(this->config, filament()->id())) : this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id()));
//BBS: a z_hop need to be handle when travel //BBS: a z_hop need to be handle when travel
if (std::abs(m_to_lift) > EPSILON) { if (std::abs(m_to_lift) > EPSILON) {
assert(std::abs(m_lifted) < EPSILON); assert(std::abs(m_lifted) < EPSILON);
@@ -793,13 +793,13 @@ std::string GCodeWriter::travel_to_xyz(const Vec3d &point, const std::string &co
{ {
//force to move xy first then z after filament change //force to move xy first then z after filament change
w.emit_xy(Vec2d(point_on_plate.x(), point_on_plate.y())); w.emit_xy(Vec2d(point_on_plate.x(), point_on_plate.y()));
w.emit_f(this->config.travel_speed.value * 60.0); w.emit_f(this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id())) * 60.0);
w.emit_comment(GCodeWriter::full_gcode_comment, comment); w.emit_comment(GCodeWriter::full_gcode_comment, comment);
out_string = w.string() + _travel_to_z(point_on_plate.z(), comment); out_string = w.string() + _travel_to_z(point_on_plate.z(), comment);
} else { } else {
GCodeG1Formatter w; GCodeG1Formatter w;
w.emit_xyz(point_on_plate); w.emit_xyz(point_on_plate);
w.emit_f(this->config.travel_speed.value * 60.0); w.emit_f(this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id())) * 60.0);
w.emit_comment(GCodeWriter::full_gcode_comment, comment); w.emit_comment(GCodeWriter::full_gcode_comment, comment);
out_string = w.string(); out_string = w.string();
} }
@@ -832,10 +832,10 @@ std::string GCodeWriter::_travel_to_z(double z, const std::string &comment)
{ {
m_pos(2) = z; m_pos(2) = z;
double speed = this->config.travel_speed_z.value; double speed = this->config.travel_speed_z.get_at(get_extruder_index(this->config, filament()->id()));
if (speed == 0.) { if (speed == 0.) {
speed = m_is_first_layer ? this->config.get_abs_value("initial_layer_travel_speed") speed = m_is_first_layer ? this->config.get_abs_value_at("initial_layer_travel_speed", get_extruder_index(this->config, filament()->id()))
: this->config.travel_speed.value; : this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id()));
} }
GCodeG1Formatter w; GCodeG1Formatter w;
@@ -849,11 +849,11 @@ std::string GCodeWriter::_travel_to_z(double z, const std::string &comment)
std::string GCodeWriter::_spiral_travel_to_z(double z, const Vec2d &ij_offset, const std::string &comment) std::string GCodeWriter::_spiral_travel_to_z(double z, const Vec2d &ij_offset, const std::string &comment)
{ {
std::string output; std::string output;
double speed = this->config.travel_speed_z.value; double speed = this->config.travel_speed_z.get_at(get_extruder_index(this->config, filament()->id()));
if (speed == 0.) { if (speed == 0.) {
speed = m_is_first_layer ? this->config.get_abs_value("initial_layer_travel_speed") speed = m_is_first_layer ? this->config.get_abs_value_at("initial_layer_travel_speed", get_extruder_index(this->config, filament()->id()))
: this->config.travel_speed.value; : this->config.travel_speed.get_at(get_extruder_index(this->config, filament()->id()));
} }
if (!this->config.enable_arc_fitting) { // Orca: if arc fitting is disabled, approximate the arc with small linear segments if (!this->config.enable_arc_fitting) { // Orca: if arc fitting is disabled, approximate the arc with small linear segments
src/libslic3r/Layer.cpp
+3 -3
View File
@@ -146,9 +146,9 @@ bool Layer::is_perimeter_compatible(const Print& print, const PrintRegion& a, co
&& config.wall_sequence == other_config.wall_sequence && config.wall_sequence == other_config.wall_sequence
&& config.is_infill_first == other_config.is_infill_first && config.is_infill_first == other_config.is_infill_first
&& config.inner_wall_speed.get_at(print.get_extruder_id(config.wall_filament)) == other_config.inner_wall_speed.get_at(print.get_extruder_id(config.wall_filament)) && config.inner_wall_speed.get_at(print.get_extruder_id(config.wall_filament)) == other_config.inner_wall_speed.get_at(print.get_extruder_id(config.wall_filament))
&& config.outer_wall_speed == other_config.outer_wall_speed && config.outer_wall_speed.get_at(print.get_extruder_id(config.wall_filament)) == other_config.outer_wall_speed.get_at(print.get_extruder_id(config.wall_filament))
&& config.small_perimeter_speed == other_config.small_perimeter_speed && config.small_perimeter_speed.get_at(print.get_extruder_id(config.wall_filament)) == other_config.small_perimeter_speed.get_at(print.get_extruder_id(config.wall_filament))
&& config.gap_infill_speed.value == other_config.gap_infill_speed.value && config.gap_infill_speed.get_at(print.get_extruder_id(config.wall_filament)) == other_config.gap_infill_speed.get_at(print.get_extruder_id(config.wall_filament))
&& config.filter_out_gap_fill.value == other_config.filter_out_gap_fill.value && config.filter_out_gap_fill.value == other_config.filter_out_gap_fill.value
&& config.detect_overhang_wall == other_config.detect_overhang_wall && config.detect_overhang_wall == other_config.detect_overhang_wall
&& config.overhang_reverse == other_config.overhang_reverse && config.overhang_reverse == other_config.overhang_reverse
src/libslic3r/MultiMaterialSegmentation.cpp
+1 -1
View File
@@ -1352,7 +1352,7 @@ static inline std::vector<std::vector<ExPolygons>> segmentation_top_and_bottom_l
out.extrusion_width = std::max<float>(out.extrusion_width, outer_wall_line_width); out.extrusion_width = std::max<float>(out.extrusion_width, outer_wall_line_width);
out.top_shell_layers = std::max<int>(out.top_shell_layers, config.top_shell_layers); out.top_shell_layers = std::max<int>(out.top_shell_layers, config.top_shell_layers);
out.bottom_shell_layers = std::max<int>(out.bottom_shell_layers, config.bottom_shell_layers); out.bottom_shell_layers = std::max<int>(out.bottom_shell_layers, config.bottom_shell_layers);
out.small_region_threshold = config.gap_infill_speed.value > 0 ? out.small_region_threshold = config.gap_infill_speed.get_at(print_object.print()->get_extruder_id(config.wall_filament - 1)) > 0 ?
// Gap fill enabled. Enable a single line of 1/2 extrusion width. // Gap fill enabled. Enable a single line of 1/2 extrusion width.
0.5f * outer_wall_line_width : 0.5f * outer_wall_line_width :
// Gap fill disabled. Enable two lines slightly overlapping. // Gap fill disabled. Enable two lines slightly overlapping.
src/libslic3r/PerimeterGenerator.cpp
+2 -2
View File
@@ -581,7 +581,7 @@ void PerimeterGenerator::split_top_surfaces(const ExPolygons &orig_polygons, ExP
coord_t ext_perimeter_width = this->ext_perimeter_flow.scaled_width(); coord_t ext_perimeter_width = this->ext_perimeter_flow.scaled_width();
coord_t ext_perimeter_spacing = this->ext_perimeter_flow.scaled_spacing(); coord_t ext_perimeter_spacing = this->ext_perimeter_flow.scaled_spacing();
bool has_gap_fill = this->config->gap_infill_speed.value > 0; bool has_gap_fill = this->config->gap_infill_speed.get_at(get_extruder_index(*print_config, this->config->wall_filament - 1)) > 0;
// split the polygons with top/not_top // split the polygons with top/not_top
// get the offset from solid surface anchor // get the offset from solid surface anchor
@@ -1189,7 +1189,7 @@ void PerimeterGenerator::process_classic()
// internal flow which is unrelated. // internal flow which is unrelated.
coord_t min_spacing = coord_t(perimeter_spacing * (1 - INSET_OVERLAP_TOLERANCE)); coord_t min_spacing = coord_t(perimeter_spacing * (1 - INSET_OVERLAP_TOLERANCE));
coord_t ext_min_spacing = coord_t(ext_perimeter_spacing * (1 - INSET_OVERLAP_TOLERANCE)); coord_t ext_min_spacing = coord_t(ext_perimeter_spacing * (1 - INSET_OVERLAP_TOLERANCE));
bool has_gap_fill = this->config->gap_infill_speed.value > 0; bool has_gap_fill = this->config->gap_infill_speed.get_at(get_extruder_index(*print_config, this->config->wall_filament - 1)) > 0;
// BBS: this flow is for smaller external perimeter for small area // BBS: this flow is for smaller external perimeter for small area
coord_t ext_min_spacing_smaller = coord_t(ext_perimeter_spacing * (1 - SMALLER_EXT_INSET_OVERLAP_TOLERANCE)); coord_t ext_min_spacing_smaller = coord_t(ext_perimeter_spacing * (1 - SMALLER_EXT_INSET_OVERLAP_TOLERANCE));
src/libslic3r/Print.cpp
+9 -4
View File
@@ -1732,6 +1732,7 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
// check if print speed/accel/jerk is higher than the maximum speed of the printer // check if print speed/accel/jerk is higher than the maximum speed of the printer
if (warning) { if (warning) {
try { try {
/* TODO: Orca: fix it
auto check_motion_ability_object_setting = [&](const std::vector<std::string>& keys_to_check, double limit) -> std::string { auto check_motion_ability_object_setting = [&](const std::vector<std::string>& keys_to_check, double limit) -> std::string {
std::string warning_key; std::string warning_key;
for (const auto& key : keys_to_check) { for (const auto& key : keys_to_check) {
@@ -1759,12 +1760,15 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
// check jerk // check jerk
if (!ignore_jerk_validation) { if (!ignore_jerk_validation) {
if (m_default_object_config.default_jerk == 1 || m_default_object_config.outer_wall_jerk == 1 || auto is_jerk_too_low = [](const ConfigOptionFloatsNullable& cfg) {
m_default_object_config.inner_wall_jerk == 1) { return std::any_of(cfg.values.begin(), cfg.values.end(), [](const float v) { return v == 1; });
};
if (is_jerk_too_low(m_default_object_config.default_jerk) || is_jerk_too_low(m_default_object_config.outer_wall_jerk) ||
is_jerk_too_low(m_default_object_config.inner_wall_jerk)) {
warning->string = L("Setting the jerk speed too low could lead to artifacts on curved surfaces"); warning->string = L("Setting the jerk speed too low could lead to artifacts on curved surfaces");
if (m_default_object_config.outer_wall_jerk == 1) if (is_jerk_too_low(m_default_object_config.outer_wall_jerk))
warning_key = "outer_wall_jerk"; warning_key = "outer_wall_jerk";
else if (m_default_object_config.inner_wall_jerk == 1) else if (is_jerk_too_low(m_default_object_config.inner_wall_jerk))
warning_key = "inner_wall_jerk"; warning_key = "inner_wall_jerk";
else else
warning_key = "default_jerk"; warning_key = "default_jerk";
@@ -1856,6 +1860,7 @@ StringObjectException Print::validate(StringObjectException *warning, Polygons*
} }
} }
} }
*/
// check speed // check speed
// Orca: disable the speed check for now as we don't cap the speed // Orca: disable the speed check for now as we don't cap the speed
src/libslic3r/PrintConfig.cpp
+305 -249
View File
@@ -1497,14 +1497,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(50, true)); def->set_default_value(new ConfigOptionFloatOrPercent(50, true));
def = this->add("enable_overhang_speed", coBool); def = this->add("enable_overhang_speed", coBools);
def->label = L("Slow down for overhang"); def->label = L("Slow down for overhang");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Enable this option to slow printing down for different overhang degree."); def->tooltip = L("Enable this option to slow printing down for different overhang degree.");
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ true }); def->nullable = true;
def->set_default_value(new ConfigOptionBoolsNullable{ true });
def = this->add("slowdown_for_curled_perimeters", coBool); def = this->add("slowdown_for_curled_perimeters", coBools);
def->label = L("Slow down for curled perimeters"); def->label = L("Slow down for curled perimeters");
def->category = L("Speed"); def->category = L("Speed");
// xgettext:no-c-format, no-boost-format // xgettext:no-c-format, no-boost-format
@@ -1519,9 +1520,10 @@ void PrintConfigDef::init_fff_params()
"applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging" "applied even if the overhanging perimeter is part of a bridge. For example, when the perimeters are 100% overhanging"
", with no wall supporting them from underneath, the 100% overhang speed will be applied."); ", with no wall supporting them from underneath, the 100% overhang speed will be applied.");
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool{ true }); def->nullable = true;
def->set_default_value(new ConfigOptionBoolsNullable{ true });
def = this->add("overhang_1_4_speed", coFloatOrPercent); def = this->add("overhang_1_4_speed", coFloatsOrPercents);
def->label = "10%"; def->label = "10%";
def->category = L("Speed"); def->category = L("Speed");
def->full_label = "10%"; def->full_label = "10%";
@@ -1531,9 +1533,10 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "outer_wall_speed"; def->ratio_over = "outer_wall_speed";
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(0, false)});
def = this->add("overhang_2_4_speed", coFloatOrPercent); def = this->add("overhang_2_4_speed", coFloatsOrPercents);
def->label = "25%"; def->label = "25%";
def->category = L("Speed"); def->category = L("Speed");
def->full_label = "25%"; def->full_label = "25%";
@@ -1543,9 +1546,10 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "outer_wall_speed"; def->ratio_over = "outer_wall_speed";
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(0, false)});
def = this->add("overhang_3_4_speed", coFloatOrPercent); def = this->add("overhang_3_4_speed", coFloatsOrPercents);
def->label = "50%"; def->label = "50%";
def->category = L("Speed"); def->category = L("Speed");
def->full_label = "50%"; def->full_label = "50%";
@@ -1555,9 +1559,10 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "outer_wall_speed"; def->ratio_over = "outer_wall_speed";
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(0, false)});
def = this->add("overhang_4_4_speed", coFloatOrPercent); def = this->add("overhang_4_4_speed", coFloatsOrPercents);
def->label = "75%"; def->label = "75%";
def->category = L("Speed"); def->category = L("Speed");
def->full_label = "75%"; def->full_label = "75%";
@@ -1567,9 +1572,10 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "outer_wall_speed"; def->ratio_over = "outer_wall_speed";
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0, false)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(0, false)});
def = this->add("bridge_speed", coFloat); def = this->add("bridge_speed", coFloats);
def->label = L("External"); def->label = L("External");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of the externally visible bridge extrusions.\n\n" def->tooltip = L("Speed of the externally visible bridge extrusions.\n\n"
@@ -1579,9 +1585,10 @@ void PrintConfigDef::init_fff_params()
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(25)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{25});
def = this->add("internal_bridge_speed", coFloatOrPercent); def = this->add("internal_bridge_speed", coFloatsOrPercents);
def->label = L("Internal"); def->label = L("Internal");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%."); def->tooltip = L("Speed of internal bridges. If the value is expressed as a percentage, it will be calculated based on the bridge_speed. Default value is 150%.");
@@ -1589,7 +1596,8 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "bridge_speed"; def->ratio_over = "bridge_speed";
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(150, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(150, true)});
def = this->add("brim_width", coFloat); def = this->add("brim_width", coFloat);
def->label = L("Brim width"); def->label = L("Brim width");
@@ -1776,14 +1784,46 @@ void PrintConfigDef::init_fff_params()
"This can improve the cooling quality for needle and small details."); "This can improve the cooling quality for needle and small details.");
def->set_default_value(new ConfigOptionBools { true }); def->set_default_value(new ConfigOptionBools { true });
def = this->add("default_acceleration", coFloat); def = this->add("default_acceleration", coFloats);
def->label = L("Normal printing"); def->label = L("Normal printing");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("The default acceleration of both normal printing and travel except initial layer."); def->tooltip = L("The default acceleration of both normal printing and travel except initial layer.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500.0)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{500.0});
def = this->add("travel_acceleration", coFloats);
def->label = L("Travel");
def->category = L("Speed");
def->tooltip = L("Acceleration of travel moves.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0;
def->mode = comAdvanced;
def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{10000.0});
def = this->add("initial_layer_travel_acceleration", coFloatsOrPercents);
def->label = L("First layer travel");
def->tooltip = L("Travel acceleration of first layer.\nThe percentage value is relative to Travel Acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "travel_acceleration";
def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(100, true)});
def = this->add("bridge_acceleration", coFloatsOrPercents);
def->label = L("Bridge");
def->category = L("Speed");
def->tooltip = L("Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "outer_wall_acceleration";
def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(50,true)});
def = this->add("default_filament_profile", coStrings); def = this->add("default_filament_profile", coStrings);
def->label = L("Default filament profile"); def->label = L("Default filament profile");
@@ -2006,6 +2046,18 @@ void PrintConfigDef::init_fff_params()
def->enum_labels.push_back(L("Octagram Spiral")); def->enum_labels.push_back(L("Octagram Spiral"));
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonicLine)); def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonicLine));
def = this->add("top_surface_density", coPercent);
def->label = L("Top surface density");
def->category = L("Strength");
def->tooltip = L("Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. "
"Reducing this value results in a textured top surface, according to the chosen top surface pattern. "
"A value of 0% will result in only the walls on the top layer being created. "
"Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.");
def->sidetext = ("%");
def->min = 0;
def->max = 100;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("bottom_surface_pattern", coEnum); def = this->add("bottom_surface_pattern", coEnum);
def->label = L("Bottom surface pattern"); def->label = L("Bottom surface pattern");
def->category = L("Strength"); def->category = L("Strength");
@@ -2015,6 +2067,17 @@ void PrintConfigDef::init_fff_params()
def->enum_labels = def_top_fill_pattern->enum_labels; def->enum_labels = def_top_fill_pattern->enum_labels;
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonic)); def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipMonotonic));
def = this->add("bottom_surface_density", coPercent);
def->label = L("Bottom surface density");
def->category = L("Strength");
def->tooltip = L("Density of the bottom surface layer. "
"Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n"
"WARNING: Lowering this value may negatively affect bed adhesion.");
def->sidetext = ("%");
def->min = 10;
def->max = 100;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("internal_solid_infill_pattern", coEnum); def = this->add("internal_solid_infill_pattern", coEnum);
def->label = L("Internal solid infill pattern"); def->label = L("Internal solid infill pattern");
def->category = L("Strength"); def->category = L("Strength");
@@ -2036,7 +2099,7 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false)); def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("outer_wall_speed", coFloat); def = this->add("outer_wall_speed", coFloats);
def->label = L("Outer wall"); def->label = L("Outer wall");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of outer wall which is outermost and visible. " def->tooltip = L("Speed of outer wall which is outermost and visible. "
@@ -2044,9 +2107,10 @@ void PrintConfigDef::init_fff_params()
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{60});
def = this->add("small_perimeter_speed", coFloatOrPercent); def = this->add("small_perimeter_speed", coFloatsOrPercents);
def->label = L("Small perimeters"); def->label = L("Small perimeters");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold " def->tooltip = L("This separate setting will affect the speed of perimeters having radius <= small_perimeter_threshold "
@@ -2056,16 +2120,18 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "outer_wall_speed"; def->ratio_over = "outer_wall_speed";
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(50, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(50, true)});
def = this->add("small_perimeter_threshold", coFloat); def = this->add("small_perimeter_threshold", coFloats);
def->label = L("Small perimeters threshold"); def->label = L("Small perimeters threshold");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("This sets the threshold for small perimeter length. Default threshold is 0mm."); def->tooltip = L("This sets the threshold for small perimeter length. Default threshold is 0mm.");
def->sidetext = L("mm"); // millimeters, CIS languages need translation def->sidetext = L("mm"); // millimeters, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{0});
def = this->add("wall_sequence", coEnum); def = this->add("wall_sequence", coEnum);
def->label = L("Walls printing order"); def->label = L("Walls printing order");
@@ -2427,18 +2493,6 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<FilamentMapMode>(fmmAutoForFlush)); def->set_default_value(new ConfigOptionEnum<FilamentMapMode>(fmmAutoForFlush));
def = this->add("enable_filament_dynamic_map", coBool);
def->label = L("Enable filament dynamic map");
def->tooltip = L("Enable dynamic filament mapping during print.");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("has_filament_switcher", coBool);
def->label = L("Has filament switcher");
def->tooltip = L("Printer has a filament switcher hardware (e.g., AMS).");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("filament_flush_temp", coInts); def = this->add("filament_flush_temp", coInts);
def->label = L("Flush temperature"); def->label = L("Flush temperature");
def->tooltip = L("Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range."); def->tooltip = L("Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range.");
@@ -2984,134 +3038,37 @@ void PrintConfigDef::init_fff_params()
def->enum_labels.push_back(L("Octagram Spiral")); def->enum_labels.push_back(L("Octagram Spiral"));
def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipCrossHatch)); def->set_default_value(new ConfigOptionEnum<InfillPattern>(ipCrossHatch));
def = this->add("lateral_lattice_angle_1", coFloat); def = this->add("top_surface_acceleration", coFloats);
def->label = L("Lateral lattice angle 1");
def->category = L("Strength");
def->tooltip = L("The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = -75;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(-45));
def = this->add("lateral_lattice_angle_2", coFloat);
def->label = L("Lateral lattice angle 2");
def->category = L("Strength");
def->tooltip = L("The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = -75;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(45));
def = this->add("infill_overhang_angle", coFloat);
def->label = L("Infill overhang angle");
def->category = L("Strength");
def->tooltip = L("The angle of the infill angled lines. 60° will result in a pure honeycomb.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = 15;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60));
auto def_infill_anchor_min = def = this->add("infill_anchor", coFloatOrPercent);
def->label = L("Sparse infill anchor length");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n"
"Set this parameter to zero to disable anchoring perimeters connected to a single infill line.");
def->sidetext = L("mm or %");
def->ratio_over = "sparse_infill_line_width";
def->max_literal = 1000;
def->gui_type = ConfigOptionDef::GUIType::f_enum_open;
def->enum_values.push_back("0");
def->enum_values.push_back("1");
def->enum_values.push_back("2");
def->enum_values.push_back("5");
def->enum_values.push_back("10");
def->enum_values.push_back("1000");
def->enum_labels.push_back(L("0 (no open anchors)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(400, true));
def = this->add("infill_anchor_max", coFloatOrPercent);
def->label = L("Maximum length of the infill anchor");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n"
"If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0.");
def->sidetext = def_infill_anchor_min->sidetext;
def->ratio_over = def_infill_anchor_min->ratio_over;
def->gui_type = def_infill_anchor_min->gui_type;
def->enum_values = def_infill_anchor_min->enum_values;
def->max_literal = def_infill_anchor_min->max_literal;
def->enum_labels.push_back(L("0 (Simple connect)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
def = this->add("inner_wall_acceleration", coFloat);
def->label = L("Inner wall");
def->category = L("Speed");
def->tooltip = L("Acceleration of inner walls.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10000));
def = this->add("travel_acceleration", coFloat);
def->label = L("Travel");
def->category = L("Speed");
def->tooltip = L("Acceleration of travel moves.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(10000));
def = this->add("top_surface_acceleration", coFloat);
def->label = L("Top surface"); def->label = L("Top surface");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of top surface infill. Using a lower value may improve top surface quality."); def->tooltip = L("Acceleration of top surface infill. Using a lower value may improve top surface quality.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{500});
def = this->add("outer_wall_acceleration", coFloat); def = this->add("outer_wall_acceleration", coFloats);
def->label = L("Outer wall"); def->label = L("Outer wall");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of outer wall. Using a lower value can improve quality."); def->tooltip = L("Acceleration of outer wall. Using a lower value can improve quality.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(500)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{500});
def = this->add("bridge_acceleration", coFloatOrPercent); def = this->add("inner_wall_acceleration", coFloats);
def->label = L("Bridge"); def->label = L("Inner wall");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration."); def->tooltip = L("Acceleration of inner walls.");
def->sidetext = L("mm/s² or %"); def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->ratio_over = "outer_wall_acceleration"; def->nullable = true;
def->set_default_value(new ConfigOptionFloatOrPercent(50,true)); def->set_default_value(new ConfigOptionFloatsNullable{10000});
def = this->add("sparse_infill_acceleration", coFloatOrPercent); def = this->add("sparse_infill_acceleration", coFloatsOrPercents);
def->label = L("Sparse infill"); def->label = L("Sparse infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration."); def->tooltip = L("Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
@@ -3119,9 +3076,10 @@ void PrintConfigDef::init_fff_params()
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->ratio_over = "default_acceleration"; def->ratio_over = "default_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(100, true)});
def = this->add("internal_solid_infill_acceleration", coFloatOrPercent); def = this->add("internal_solid_infill_acceleration", coFloatsOrPercents);
def->label = L("Internal solid infill"); def->label = L("Internal solid infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration."); def->tooltip = L("Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
@@ -3129,25 +3087,18 @@ void PrintConfigDef::init_fff_params()
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->ratio_over = "default_acceleration"; def->ratio_over = "default_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(100, true)});
def = this->add("initial_layer_acceleration", coFloat); def = this->add("initial_layer_acceleration", coFloats);
def->label = L("First layer"); def->label = L("First layer");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Acceleration of the first layer. Using a lower value can improve build plate adhesion."); def->tooltip = L("Acceleration of the first layer. Using a lower value can improve build plate adhesion.");
def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation def->sidetext = L(u8"mm/s²"); // millimeters per second per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(300)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{300});
def = this->add("initial_layer_travel_acceleration", coFloatOrPercent);
def->label = L("First layer travel");
def->tooltip = L("Travel acceleration of first layer.\nThe percentage value is relative to Travel Acceleration.");
def->sidetext = L("mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "travel_acceleration";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true));
def = this->add("accel_to_decel_enable", coBool); def = this->add("accel_to_decel_enable", coBool);
def->label = L("Enable accel_to_decel"); def->label = L("Enable accel_to_decel");
@@ -3166,16 +3117,17 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(50)); def->set_default_value(new ConfigOptionPercent(50));
def = this->add("default_jerk", coFloat); def = this->add("default_jerk", coFloats);
def->label = L("Default"); def->label = L("Default");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Default jerk."); def->tooltip = L("Default jerk.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{0});
def = this->add("default_junction_deviation", coFloat); def = this->add("default_junction_deviation", coFloats);
def->label = L("Junction Deviation"); def->label = L("Junction Deviation");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)."); def->tooltip = L("Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting).");
@@ -3183,70 +3135,78 @@ void PrintConfigDef::init_fff_params()
def->min = 0.f; def->min = 0.f;
def->max = 0.3f; def->max = 0.3f;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.f)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{0.f});
def = this->add("outer_wall_jerk", coFloat); def = this->add("outer_wall_jerk", coFloats);
def->label = L("Outer wall"); def->label = L("Outer wall");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Jerk of outer walls."); def->tooltip = L("Jerk of outer walls.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{9});
def = this->add("inner_wall_jerk", coFloat); def = this->add("inner_wall_jerk", coFloats);
def->label = L("Inner wall"); def->label = L("Inner wall");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Jerk of inner walls."); def->tooltip = L("Jerk of inner walls.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{9});
def = this->add("top_surface_jerk", coFloat); def = this->add("top_surface_jerk", coFloats);
def->label = L("Top surface"); def->label = L("Top surface");
def->category = L("Speed"); def->category = L("Speed");
def->nullable = true;
def->tooltip = L("Jerk for top surface."); def->tooltip = L("Jerk for top surface.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9)); def->set_default_value(new ConfigOptionFloatsNullable{9});
def = this->add("infill_jerk", coFloat); def = this->add("infill_jerk", coFloats);
def->label = L("Infill"); def->label = L("Infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Jerk for infill."); def->tooltip = L("Jerk for infill.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{9});
def = this->add("initial_layer_jerk", coFloat); def = this->add("initial_layer_jerk", coFloats);
def->label = L("First layer"); def->label = L("First layer");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Jerk for the first layer."); def->tooltip = L("Jerk for the first layer.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(9)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{9});
def = this->add("travel_jerk", coFloat); def = this->add("travel_jerk", coFloats);
def->label = L("Travel"); def->label = L("Travel");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Jerk for travel."); def->tooltip = L("Jerk for travel.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(12)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{12});
def = this->add("initial_layer_travel_jerk", coFloatOrPercent); def = this->add("initial_layer_travel_jerk", coFloatsOrPercents);
def->label = L("First layer travel"); def->label = L("First layer travel");
def->tooltip = L("Travel jerk of first layer.\nThe percentage value is relative to Travel Jerk."); def->tooltip = L("Travel jerk of first layer.\nThe percentage value is relative to Travel Jerk.");
def->sidetext = L("mm/s or %"); def->sidetext = L("mm/s or %");
def->min = 0; def->min = 0;
def->mode = comAdvanced; def->mode = comAdvanced;
def->ratio_over = "travel_jerk"; def->ratio_over = "travel_jerk";
def->set_default_value(new ConfigOptionFloatOrPercent(100, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(100, true)});
def = this->add("initial_layer_line_width", coFloatOrPercent); def = this->add("initial_layer_line_width", coFloatOrPercent);
def->label = L("First layer"); def->label = L("First layer");
@@ -3260,7 +3220,6 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false)); def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("initial_layer_print_height", coFloat); def = this->add("initial_layer_print_height", coFloat);
def->label = L("First layer height"); def->label = L("First layer height");
def->category = L("Quality"); def->category = L("Quality");
@@ -3277,23 +3236,25 @@ void PrintConfigDef::init_fff_params()
// "Note that this option only takes effect if no prime tower is generated in current plate."); // "Note that this option only takes effect if no prime tower is generated in current plate.");
//def->set_default_value(new ConfigOptionBool(0)); //def->set_default_value(new ConfigOptionBool(0));
def = this->add("initial_layer_speed", coFloat); def = this->add("initial_layer_speed", coFloats);
def->label = L("First layer"); def->label = L("First layer");
def->tooltip = L("Speed of the first layer except the solid infill part."); def->tooltip = L("Speed of the first layer except the solid infill part.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(30)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{30});
def = this->add("initial_layer_infill_speed", coFloat); def = this->add("initial_layer_infill_speed", coFloats);
def->label = L("First layer infill"); def->label = L("First layer infill");
def->tooltip = L("Speed of solid infill part of the first layer."); def->tooltip = L("Speed of solid infill part of the first layer.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60.0)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{60.0});
def = this->add("initial_layer_travel_speed", coFloatOrPercent); def = this->add("initial_layer_travel_speed", coFloatsOrPercents);
def->label = L("First layer travel speed"); def->label = L("First layer travel speed");
def->tooltip = L("Travel speed of the first layer."); def->tooltip = L("Travel speed of the first layer.");
def->category = L("Speed"); def->category = L("Speed");
@@ -3301,7 +3262,8 @@ void PrintConfigDef::init_fff_params()
def->ratio_over = "travel_speed"; def->ratio_over = "travel_speed";
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(100, true)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsOrPercentsNullable{FloatOrPercent(100, true)});
def = this->add("slow_down_layers", coInt); def = this->add("slow_down_layers", coInt);
def->label = L("Number of slow layers"); def->label = L("Number of slow layers");
@@ -3584,14 +3546,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0)); def->set_default_value(new ConfigOptionFloat(0));
def = this->add("gap_infill_speed", coFloat); def = this->add("gap_infill_speed", coFloats);
def->label = L("Gap infill"); def->label = L("Gap infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of gap infill. Gap usually has irregular line width and should be printed more slowly."); def->tooltip = L("Speed of gap infill. Gap usually has irregular line width and should be printed more slowly.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(30)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{30});
// BBS // BBS
def = this->add("precise_z_height", coBool); def = this->add("precise_z_height", coBool);
@@ -4004,6 +3967,87 @@ void PrintConfigDef::init_fff_params()
def->gui_type = ConfigOptionDef::GUIType::one_string; def->gui_type = ConfigOptionDef::GUIType::one_string;
def->set_default_value(new ConfigOptionPoints()); def->set_default_value(new ConfigOptionPoints());
def = this->add("lateral_lattice_angle_1", coFloat);
def->label = L("Lateral lattice angle 1");
def->category = L("Strength");
def->tooltip = L("The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = -75;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(-45));
def = this->add("lateral_lattice_angle_2", coFloat);
def->label = L("Lateral lattice angle 2");
def->category = L("Strength");
def->tooltip = L("The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = -75;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(45));
def = this->add("infill_overhang_angle", coFloat);
def->label = L("Infill overhang angle");
def->category = L("Strength");
def->tooltip = L("The angle of the infill angled lines. 60° will result in a pure honeycomb.");
def->sidetext = u8"°"; // degrees, don't need translation
def->min = 15;
def->max = 75;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(60));
auto def_infill_anchor_min = def = this->add("infill_anchor", coFloatOrPercent);
def->label = L("Sparse infill anchor length");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n"
"Set this parameter to zero to disable anchoring perimeters connected to a single infill line.");
def->sidetext = L("mm or %");
def->ratio_over = "sparse_infill_line_width";
def->max_literal = 1000;
def->gui_type = ConfigOptionDef::GUIType::f_enum_open;
def->enum_values.push_back("0");
def->enum_values.push_back("1");
def->enum_values.push_back("2");
def->enum_values.push_back("5");
def->enum_values.push_back("10");
def->enum_values.push_back("1000");
def->enum_labels.push_back(L("0 (no open anchors)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(400, true));
def = this->add("infill_anchor_max", coFloatOrPercent);
def->label = L("Maximum length of the infill anchor");
def->category = L("Strength");
def->tooltip = L("Connect an infill line to an internal perimeter with a short segment of an additional perimeter. "
"If expressed as percentage (example: 15%) it is calculated over infill extrusion width. "
"Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment "
"shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side "
"and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n"
"If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0.");
def->sidetext = def_infill_anchor_min->sidetext;
def->ratio_over = def_infill_anchor_min->ratio_over;
def->gui_type = def_infill_anchor_min->gui_type;
def->enum_values = def_infill_anchor_min->enum_values;
def->max_literal = def_infill_anchor_min->max_literal;
def->enum_labels.push_back(L("0 (Simple connect)"));
def->enum_labels.push_back("1 mm");
def->enum_labels.push_back("2 mm");
def->enum_labels.push_back("5 mm");
def->enum_labels.push_back("10 mm");
def->enum_labels.push_back(L("1000 (unlimited)"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
def = this->add("sparse_infill_filament", coInt); def = this->add("sparse_infill_filament", coInt);
def->gui_type = ConfigOptionDef::GUIType::i_enum_open; def->gui_type = ConfigOptionDef::GUIType::i_enum_open;
def->label = L("Infill"); def->label = L("Infill");
@@ -4051,14 +4095,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(25)); def->set_default_value(new ConfigOptionPercent(25));
def = this->add("sparse_infill_speed", coFloat); def = this->add("sparse_infill_speed", coFloats);
def->label = L("Sparse infill"); def->label = L("Sparse infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of internal sparse infill."); def->tooltip = L("Speed of internal sparse infill.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{100});
def = this->add("inherits", coString); def = this->add("inherits", coString);
def->label = L("Inherits profile"); def->label = L("Inherits profile");
@@ -5250,6 +5295,18 @@ void PrintConfigDef::init_fff_params()
def->tooltip = "AMS counts per extruder."; def->tooltip = "AMS counts per extruder.";
def->set_default_value(new ConfigOptionStrings { }); def->set_default_value(new ConfigOptionStrings { });
def = this->add("enable_filament_dynamic_map", coBool);
def->label = L("Enable filament dynamic map");
def->tooltip = L("Enable dynamic filament mapping during print.");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("has_filament_switcher", coBool);
def->label = L("Has filament switcher");
def->tooltip = L("Printer has a filament switcher hardware (e.g., AMS).");
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("printer_extruder_id", coInts); def = this->add("printer_extruder_id", coInts);
// internal use only, don't need translation // internal use only, don't need translation
def->label = "Printer extruder id"; def->label = "Printer extruder id";
@@ -5667,14 +5724,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false)); def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("internal_solid_infill_speed", coFloat); def = this->add("internal_solid_infill_speed", coFloats);
def->label = L("Internal solid infill"); def->label = L("Internal solid infill");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of internal solid infill, not the top and bottom surface."); def->tooltip = L("Speed of internal solid infill, not the top and bottom surface.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{100});
def = this->add("spiral_mode", coBool); def = this->add("spiral_mode", coBool);
def->label = L("Spiral vase"); def->label = L("Spiral vase");
@@ -6122,14 +6180,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0.5)); def->set_default_value(new ConfigOptionFloat(0.5));
def = this->add("support_interface_speed", coFloat); def = this->add("support_interface_speed", coFloats);
def->label = L("Support interface"); def->label = L("Support interface");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of support interface."); def->tooltip = L("Speed of support interface.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(80)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{80});
def = this->add("support_base_pattern", coEnum); def = this->add("support_base_pattern", coEnum);
def->label = L("Base pattern"); def->label = L("Base pattern");
@@ -6193,14 +6252,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(0)); def->set_default_value(new ConfigOptionFloat(0));
def = this->add("support_speed", coFloat); def = this->add("support_speed", coFloats);
def->label = L("Support"); def->label = L("Support");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of support."); def->tooltip = L("Speed of support.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(80)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{ 80 });
def = this->add("support_style", coEnum); def = this->add("support_style", coEnum);
def->label = L("Style"); def->label = L("Style");
@@ -6553,14 +6613,15 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloatOrPercent(0., false)); def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
def = this->add("top_surface_speed", coFloat); def = this->add("top_surface_speed", coFloats);
def->label = L("Top surface"); def->label = L("Top surface");
def->category = L("Speed"); def->category = L("Speed");
def->tooltip = L("Speed of top surface infill which is solid."); def->tooltip = L("Speed of top surface infill which is solid.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(100)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{100});
def = this->add("top_shell_layers", coInt); def = this->add("top_shell_layers", coInt);
def->label = L("Top shell layers"); def->label = L("Top shell layers");
@@ -6584,39 +6645,17 @@ void PrintConfigDef::init_fff_params()
def->min = 0; def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.6)); def->set_default_value(new ConfigOptionFloat(0.6));
def = this->add("top_surface_density", coPercent);
def->label = L("Top surface density");
def->category = L("Strength");
def->tooltip = L("Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. "
"Reducing this value results in a textured top surface, according to the chosen top surface pattern. "
"A value of 0% will result in only the walls on the top layer being created. "
"Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.");
def->sidetext = ("%");
def->min = 0;
def->max = 100;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("bottom_surface_density", coPercent); def = this->add("travel_speed", coFloats);
def->label = L("Bottom surface density");
def->category = L("Strength");
def->tooltip = L("Density of the bottom surface layer. "
"Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n"
"WARNING: Lowering this value may negatively affect bed adhesion.");
def->sidetext = ("%");
def->min = 10;
def->max = 100;
def->set_default_value(new ConfigOptionPercent(100));
def = this->add("travel_speed", coFloat);
def->label = L("Travel"); def->label = L("Travel");
def->tooltip = L("Speed of travel which is faster and without extrusion."); def->tooltip = L("Speed of travel which is faster and without extrusion.");
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 1; def->min = 1;
def->mode = comAdvanced; def->mode = comAdvanced;
def->set_default_value(new ConfigOptionFloat(120)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{120});
def = this->add("travel_speed_z", coFloat); def = this->add("travel_speed_z", coFloats);
//def->label = L("Z travel"); //def->label = L("Z travel");
//def->tooltip = L("Speed of vertical travel along z axis. " //def->tooltip = L("Speed of vertical travel along z axis. "
// "This is typically lower because build plate or gantry is hard to be moved. " // "This is typically lower because build plate or gantry is hard to be moved. "
@@ -6624,7 +6663,8 @@ void PrintConfigDef::init_fff_params()
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
def->min = 0; def->min = 0;
def->mode = comDevelop; def->mode = comDevelop;
def->set_default_value(new ConfigOptionFloat(0.)); def->nullable = true;
def->set_default_value(new ConfigOptionFloatsNullable{0.});
def = this->add("wipe", coBools); def = this->add("wipe", coBools);
def->label = L("Wipe while retracting"); def->label = L("Wipe while retracting");
@@ -8155,32 +8195,48 @@ const PrintConfigDef print_config_def;
//todo //todo
std::set<std::string> print_options_with_variant = { std::set<std::string> print_options_with_variant = {
//"initial_layer_speed", "initial_layer_speed",
//"initial_layer_infill_speed", "initial_layer_infill_speed",
//"outer_wall_speed", "outer_wall_speed",
"inner_wall_speed", "inner_wall_speed",
//"small_perimeter_speed", //coFloatsOrPercents "small_perimeter_speed", //coFloatsOrPercents
//"small_perimeter_threshold", "small_perimeter_threshold",
//"sparse_infill_speed", "sparse_infill_speed",
//"internal_solid_infill_speed", "internal_solid_infill_speed",
//"top_surface_speed", "top_surface_speed",
//"enable_overhang_speed", //coBools "enable_overhang_speed", //coBools
//"overhang_1_4_speed", "overhang_1_4_speed",
//"overhang_2_4_speed", "overhang_2_4_speed",
//"overhang_3_4_speed", "overhang_3_4_speed",
//"overhang_4_4_speed", "overhang_4_4_speed",
//"bridge_speed", "slowdown_for_curled_perimeters",
//"gap_infill_speed", "bridge_speed",
//"support_speed", "internal_bridge_speed",
//"support_interface_speed", "gap_infill_speed",
//"travel_speed", "support_speed",
//"travel_speed_z", "support_interface_speed",
//"default_acceleration", "travel_speed",
//"initial_layer_acceleration", "travel_speed_z",
//"outer_wall_acceleration", "initial_layer_travel_speed",
//"inner_wall_acceleration", "default_acceleration",
//"sparse_infill_acceleration", //coFloatsOrPercents "bridge_acceleration",
//"top_surface_acceleration", "travel_acceleration",
"initial_layer_travel_acceleration",
"initial_layer_acceleration",
"outer_wall_acceleration",
"inner_wall_acceleration",
"sparse_infill_acceleration", //coFloatsOrPercents
"internal_solid_infill_acceleration", //coFloatsOrPercents
"top_surface_acceleration",
"default_jerk",
"outer_wall_jerk",
"inner_wall_jerk",
"infill_jerk",
"top_surface_jerk",
"initial_layer_jerk",
"travel_jerk",
"initial_layer_travel_jerk",
"default_junction_deviation",
"print_extruder_id", //coInts "print_extruder_id", //coInts
"print_extruder_variant" //coStrings "print_extruder_variant" //coStrings
}; };
src/libslic3r/PrintConfig.hpp
+41 -41
View File
@@ -976,13 +976,13 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionInt, support_interface_bottom_layers)) ((ConfigOptionInt, support_interface_bottom_layers))
// Spacing between interface lines (the hatching distance). Set zero to get a solid interface. // Spacing between interface lines (the hatching distance). Set zero to get a solid interface.
((ConfigOptionFloat, support_interface_spacing)) ((ConfigOptionFloat, support_interface_spacing))
((ConfigOptionFloat, support_interface_speed)) ((ConfigOptionFloatsNullable, support_interface_speed))
((ConfigOptionEnum<SupportMaterialPattern>, support_base_pattern)) ((ConfigOptionEnum<SupportMaterialPattern>, support_base_pattern))
((ConfigOptionEnum<SupportMaterialInterfacePattern>, support_interface_pattern)) ((ConfigOptionEnum<SupportMaterialInterfacePattern>, support_interface_pattern))
// Spacing between support material lines (the hatching distance). // Spacing between support material lines (the hatching distance).
((ConfigOptionFloat, support_base_pattern_spacing)) ((ConfigOptionFloat, support_base_pattern_spacing))
((ConfigOptionFloat, support_expansion)) ((ConfigOptionFloat, support_expansion))
((ConfigOptionFloat, support_speed)) ((ConfigOptionFloatsNullable, support_speed))
((ConfigOptionEnum<SupportMaterialStyle>, support_style)) ((ConfigOptionEnum<SupportMaterialStyle>, support_style))
// Orca: a flag enabling the ability to override flow ratios // Orca: a flag enabling the ability to override flow ratios
@@ -1050,25 +1050,25 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionFloat, min_length_factor)) ((ConfigOptionFloat, min_length_factor))
// Move all acceleration and jerk settings to object // Move all acceleration and jerk settings to object
((ConfigOptionFloat, default_acceleration)) ((ConfigOptionFloatsNullable, default_acceleration))
((ConfigOptionFloat, outer_wall_acceleration)) ((ConfigOptionFloatsNullable, outer_wall_acceleration))
((ConfigOptionFloat, inner_wall_acceleration)) ((ConfigOptionFloatsNullable, inner_wall_acceleration))
((ConfigOptionFloat, top_surface_acceleration)) ((ConfigOptionFloatsNullable, top_surface_acceleration))
((ConfigOptionFloat, initial_layer_acceleration)) ((ConfigOptionFloatsNullable, initial_layer_acceleration))
((ConfigOptionFloatOrPercent, bridge_acceleration)) ((ConfigOptionFloatsOrPercentsNullable, bridge_acceleration))
((ConfigOptionFloat, travel_acceleration)) ((ConfigOptionFloatsNullable, travel_acceleration))
((ConfigOptionFloatOrPercent, sparse_infill_acceleration)) ((ConfigOptionFloatsOrPercentsNullable, sparse_infill_acceleration))
((ConfigOptionFloatOrPercent, internal_solid_infill_acceleration)) ((ConfigOptionFloatsOrPercentsNullable, internal_solid_infill_acceleration))
((ConfigOptionFloat, default_jerk)) ((ConfigOptionFloatsNullable, default_jerk))
((ConfigOptionFloat, outer_wall_jerk)) ((ConfigOptionFloatsNullable, outer_wall_jerk))
((ConfigOptionFloat, inner_wall_jerk)) ((ConfigOptionFloatsNullable, inner_wall_jerk))
((ConfigOptionFloat, infill_jerk)) ((ConfigOptionFloatsNullable, infill_jerk))
((ConfigOptionFloat, top_surface_jerk)) ((ConfigOptionFloatsNullable, top_surface_jerk))
((ConfigOptionFloat, initial_layer_jerk)) ((ConfigOptionFloatsNullable, initial_layer_jerk))
((ConfigOptionFloat, travel_jerk)) ((ConfigOptionFloatsNullable, travel_jerk))
((ConfigOptionBool, precise_z_height)) ((ConfigOptionBool, precise_z_height))
((ConfigOptionFloat, default_junction_deviation)) ((ConfigOptionFloatsNullable, default_junction_deviation))
((ConfigOptionBool, interlocking_beam)) ((ConfigOptionBool, interlocking_beam))
((ConfigOptionFloat,interlocking_beam_width)) ((ConfigOptionFloat,interlocking_beam_width))
@@ -1093,8 +1093,8 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionFloat, internal_bridge_angle)) // ORCA: Internal bridge angle override ((ConfigOptionFloat, internal_bridge_angle)) // ORCA: Internal bridge angle override
((ConfigOptionFloat, bridge_flow)) ((ConfigOptionFloat, bridge_flow))
((ConfigOptionFloat, internal_bridge_flow)) ((ConfigOptionFloat, internal_bridge_flow))
((ConfigOptionFloat, bridge_speed)) ((ConfigOptionFloatsNullable, bridge_speed))
((ConfigOptionFloatOrPercent, internal_bridge_speed)) ((ConfigOptionFloatsOrPercentsNullable, internal_bridge_speed))
((ConfigOptionEnum<EnsureVerticalShellThickness>, ensure_vertical_shell_thickness)) ((ConfigOptionEnum<EnsureVerticalShellThickness>, ensure_vertical_shell_thickness))
((ConfigOptionPercent, top_surface_density)) ((ConfigOptionPercent, top_surface_density))
((ConfigOptionPercent, bottom_surface_density)) ((ConfigOptionPercent, bottom_surface_density))
@@ -1102,7 +1102,7 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionEnum<InfillPattern>, bottom_surface_pattern)) ((ConfigOptionEnum<InfillPattern>, bottom_surface_pattern))
((ConfigOptionEnum<InfillPattern>, internal_solid_infill_pattern)) ((ConfigOptionEnum<InfillPattern>, internal_solid_infill_pattern))
((ConfigOptionFloatOrPercent, outer_wall_line_width)) ((ConfigOptionFloatOrPercent, outer_wall_line_width))
((ConfigOptionFloat, outer_wall_speed)) ((ConfigOptionFloatsNullable, outer_wall_speed))
((ConfigOptionFloat, infill_direction)) ((ConfigOptionFloat, infill_direction))
((ConfigOptionFloat, solid_infill_direction)) ((ConfigOptionFloat, solid_infill_direction))
((ConfigOptionString, solid_infill_rotate_template)) ((ConfigOptionString, solid_infill_rotate_template))
@@ -1128,12 +1128,12 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionInt, fuzzy_skin_ripples_per_layer)) ((ConfigOptionInt, fuzzy_skin_ripples_per_layer))
((ConfigOptionPercent, fuzzy_skin_ripple_offset)) ((ConfigOptionPercent, fuzzy_skin_ripple_offset))
((ConfigOptionInt, fuzzy_skin_layers_between_ripple_offset)) ((ConfigOptionInt, fuzzy_skin_layers_between_ripple_offset))
((ConfigOptionFloat, gap_infill_speed)) ((ConfigOptionFloatsNullable, gap_infill_speed))
((ConfigOptionInt, sparse_infill_filament)) ((ConfigOptionInt, sparse_infill_filament))
((ConfigOptionFloatOrPercent, sparse_infill_line_width)) ((ConfigOptionFloatOrPercent, sparse_infill_line_width))
((ConfigOptionPercent, infill_wall_overlap)) ((ConfigOptionPercent, infill_wall_overlap))
((ConfigOptionPercent, top_bottom_infill_wall_overlap)) ((ConfigOptionPercent, top_bottom_infill_wall_overlap))
((ConfigOptionFloat, sparse_infill_speed)) ((ConfigOptionFloatsNullable, sparse_infill_speed))
((ConfigOptionPercent, skeleton_infill_density)) ((ConfigOptionPercent, skeleton_infill_density))
((ConfigOptionPercent, skin_infill_density)) ((ConfigOptionPercent, skin_infill_density))
((ConfigOptionFloat, infill_lock_depth)) ((ConfigOptionFloat, infill_lock_depth))
@@ -1171,19 +1171,19 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionFloat, minimum_sparse_infill_area)) ((ConfigOptionFloat, minimum_sparse_infill_area))
((ConfigOptionInt, solid_infill_filament)) ((ConfigOptionInt, solid_infill_filament))
((ConfigOptionFloatOrPercent, internal_solid_infill_line_width)) ((ConfigOptionFloatOrPercent, internal_solid_infill_line_width))
((ConfigOptionFloat, internal_solid_infill_speed)) ((ConfigOptionFloatsNullable, internal_solid_infill_speed))
// Detect thin walls. // Detect thin walls.
((ConfigOptionBool, detect_thin_wall)) ((ConfigOptionBool, detect_thin_wall))
((ConfigOptionFloatOrPercent, top_surface_line_width)) ((ConfigOptionFloatOrPercent, top_surface_line_width))
((ConfigOptionInt, top_shell_layers)) ((ConfigOptionInt, top_shell_layers))
((ConfigOptionFloat, top_shell_thickness)) ((ConfigOptionFloat, top_shell_thickness))
((ConfigOptionFloat, top_surface_speed)) ((ConfigOptionFloatsNullable, top_surface_speed))
//BBS //BBS
((ConfigOptionBool, enable_overhang_speed)) ((ConfigOptionBoolsNullable, enable_overhang_speed))
((ConfigOptionFloatOrPercent, overhang_1_4_speed)) ((ConfigOptionFloatsOrPercentsNullable, overhang_1_4_speed))
((ConfigOptionFloatOrPercent, overhang_2_4_speed)) ((ConfigOptionFloatsOrPercentsNullable, overhang_2_4_speed))
((ConfigOptionFloatOrPercent, overhang_3_4_speed)) ((ConfigOptionFloatsOrPercentsNullable, overhang_3_4_speed))
((ConfigOptionFloatOrPercent, overhang_4_4_speed)) ((ConfigOptionFloatsOrPercentsNullable, overhang_4_4_speed))
((ConfigOptionBool, only_one_wall_top)) ((ConfigOptionBool, only_one_wall_top))
//SoftFever //SoftFever
@@ -1199,8 +1199,8 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionBool, precise_outer_wall)) ((ConfigOptionBool, precise_outer_wall))
((ConfigOptionPercent, bridge_density)) ((ConfigOptionPercent, bridge_density))
((ConfigOptionFloat, filter_out_gap_fill)) ((ConfigOptionFloat, filter_out_gap_fill))
((ConfigOptionFloatOrPercent, small_perimeter_speed)) ((ConfigOptionFloatsOrPercentsNullable, small_perimeter_speed))
((ConfigOptionFloat, small_perimeter_threshold)) ((ConfigOptionFloatsNullable, small_perimeter_threshold))
((ConfigOptionFloat, top_solid_infill_flow_ratio)) ((ConfigOptionFloat, top_solid_infill_flow_ratio))
((ConfigOptionFloat, bottom_solid_infill_flow_ratio)) ((ConfigOptionFloat, bottom_solid_infill_flow_ratio))
((ConfigOptionFloatOrPercent, infill_anchor)) ((ConfigOptionFloatOrPercent, infill_anchor))
@@ -1209,7 +1209,7 @@ PRINT_CONFIG_CLASS_DEFINE(
// Orca // Orca
((ConfigOptionBool, make_overhang_printable)) ((ConfigOptionBool, make_overhang_printable))
((ConfigOptionBool, extra_perimeters_on_overhangs)) ((ConfigOptionBool, extra_perimeters_on_overhangs))
((ConfigOptionBool, slowdown_for_curled_perimeters)) ((ConfigOptionBoolsNullable, slowdown_for_curled_perimeters))
((ConfigOptionBool, hole_to_polyhole)) ((ConfigOptionBool, hole_to_polyhole))
((ConfigOptionFloatOrPercent, hole_to_polyhole_threshold)) ((ConfigOptionFloatOrPercent, hole_to_polyhole_threshold))
((ConfigOptionBool, hole_to_polyhole_twisted)) ((ConfigOptionBool, hole_to_polyhole_twisted))
@@ -1404,8 +1404,8 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionString, change_extrusion_role_gcode)) ((ConfigOptionString, change_extrusion_role_gcode))
((ConfigOptionString, process_change_extrusion_role_gcode)) ((ConfigOptionString, process_change_extrusion_role_gcode))
((ConfigOptionStrings, filament_change_extrusion_role_gcode)) ((ConfigOptionStrings, filament_change_extrusion_role_gcode))
((ConfigOptionFloat, travel_speed)) ((ConfigOptionFloatsNullable, travel_speed))
((ConfigOptionFloat, travel_speed_z)) ((ConfigOptionFloatsNullable, travel_speed_z))
((ConfigOptionBool, silent_mode)) ((ConfigOptionBool, silent_mode))
((ConfigOptionString, machine_pause_gcode)) ((ConfigOptionString, machine_pause_gcode))
((ConfigOptionString, template_custom_gcode)) ((ConfigOptionString, template_custom_gcode))
@@ -1429,9 +1429,9 @@ PRINT_CONFIG_CLASS_DEFINE(
((ConfigOptionBool, use_relative_e_distances)) ((ConfigOptionBool, use_relative_e_distances))
((ConfigOptionBool, accel_to_decel_enable)) ((ConfigOptionBool, accel_to_decel_enable))
((ConfigOptionPercent, accel_to_decel_factor)) ((ConfigOptionPercent, accel_to_decel_factor))
((ConfigOptionFloatOrPercent, initial_layer_travel_speed)) ((ConfigOptionFloatsOrPercentsNullable, initial_layer_travel_speed))
((ConfigOptionFloatOrPercent, initial_layer_travel_acceleration)) ((ConfigOptionFloatsOrPercentsNullable, initial_layer_travel_acceleration))
((ConfigOptionFloatOrPercent, initial_layer_travel_jerk)) ((ConfigOptionFloatsOrPercentsNullable, initial_layer_travel_jerk))
((ConfigOptionBool, bbl_calib_mark_logo)) ((ConfigOptionBool, bbl_calib_mark_logo))
((ConfigOptionBool, disable_m73)) ((ConfigOptionBool, disable_m73))
@@ -1537,10 +1537,10 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
((ConfigOptionInts, complete_print_exhaust_fan_speed)) ((ConfigOptionInts, complete_print_exhaust_fan_speed))
((ConfigOptionFloatOrPercent, initial_layer_line_width)) ((ConfigOptionFloatOrPercent, initial_layer_line_width))
((ConfigOptionFloat, initial_layer_print_height)) ((ConfigOptionFloat, initial_layer_print_height))
((ConfigOptionFloat, initial_layer_speed)) ((ConfigOptionFloatsNullable, initial_layer_speed))
//BBS //BBS
((ConfigOptionFloat, initial_layer_infill_speed)) ((ConfigOptionFloatsNullable, initial_layer_infill_speed))
((ConfigOptionInts, nozzle_temperature_initial_layer)) ((ConfigOptionInts, nozzle_temperature_initial_layer))
((ConfigOptionInts, full_fan_speed_layer)) ((ConfigOptionInts, full_fan_speed_layer))
((ConfigOptionFloats, fan_max_speed)) ((ConfigOptionFloats, fan_max_speed))
src/slic3r/GUI/ConfigManipulation.cpp
+11 -11
View File
@@ -567,7 +567,7 @@ void ConfigManipulation::apply_null_fff_config(DynamicPrintConfig *config, std::
} }
} }
void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, const bool is_global_config) void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, int variant_index, const bool is_global_config)
{ {
PresetBundle *preset_bundle = wxGetApp().preset_bundle; PresetBundle *preset_bundle = wxGetApp().preset_bundle;
@@ -669,7 +669,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
for (auto el : { "top_surface_line_width", "top_surface_speed" }) for (auto el : { "top_surface_line_width", "top_surface_speed" })
toggle_field(el, has_top_shell); toggle_field(el, has_top_shell);
bool have_default_acceleration = config->opt_float("default_acceleration") > 0; bool have_default_acceleration = config->opt_float_nullable("default_acceleration", variant_index) > 0;
for (auto el : {"outer_wall_acceleration", "inner_wall_acceleration", "initial_layer_acceleration", "initial_layer_travel_acceleration", for (auto el : {"outer_wall_acceleration", "inner_wall_acceleration", "initial_layer_acceleration", "initial_layer_travel_acceleration",
"top_surface_acceleration", "travel_acceleration", "bridge_acceleration", "sparse_infill_acceleration", "internal_solid_infill_acceleration"}) "top_surface_acceleration", "travel_acceleration", "bridge_acceleration", "sparse_infill_acceleration", "internal_solid_infill_acceleration"})
@@ -683,17 +683,17 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
} }
toggle_line("default_junction_deviation", gcflavor == gcfMarlinFirmware); toggle_line("default_junction_deviation", gcflavor == gcfMarlinFirmware);
if (machine_supports_junction_deviation) { if (machine_supports_junction_deviation) {
toggle_field("default_junction_deviation", true); toggle_field("default_junction_deviation", true, variant_index);
toggle_field("default_jerk", false); toggle_field("default_jerk", false, variant_index);
for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "initial_layer_travel_jerk", "top_surface_jerk", "travel_jerk", "infill_jerk"}) for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "initial_layer_travel_jerk", "top_surface_jerk", "travel_jerk", "infill_jerk"})
toggle_line(el, false); toggle_line(el, false, variant_index);
} else { } else {
toggle_field("default_junction_deviation", false); toggle_field("default_junction_deviation", false);
toggle_field("default_jerk", true); toggle_field("default_jerk", true);
bool have_default_jerk = config->has("default_jerk") && config->opt_float("default_jerk") > 0; bool have_default_jerk = config->has("default_jerk") && config->opt_float_nullable("default_jerk", variant_index) > 0;
for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "initial_layer_travel_jerk", "top_surface_jerk", "travel_jerk", "infill_jerk"}) { for (auto el : { "outer_wall_jerk", "inner_wall_jerk", "initial_layer_jerk", "initial_layer_travel_jerk", "top_surface_jerk", "travel_jerk", "infill_jerk"}) {
toggle_line(el, true); toggle_line(el, true, variant_index);
toggle_field(el, have_default_jerk); toggle_field(el, have_default_jerk, variant_index);
} }
} }
@@ -869,11 +869,11 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co
for (auto el : {"first_layer_flow_ratio", "outer_wall_flow_ratio", "inner_wall_flow_ratio", "overhang_flow_ratio", "sparse_infill_flow_ratio", "internal_solid_infill_flow_ratio", "gap_fill_flow_ratio", "support_flow_ratio", "support_interface_flow_ratio"}) for (auto el : {"first_layer_flow_ratio", "outer_wall_flow_ratio", "inner_wall_flow_ratio", "overhang_flow_ratio", "sparse_infill_flow_ratio", "internal_solid_infill_flow_ratio", "gap_fill_flow_ratio", "support_flow_ratio", "support_interface_flow_ratio"})
toggle_line(el, has_set_other_flow_ratios); toggle_line(el, has_set_other_flow_ratios);
bool has_overhang_speed = config->opt_bool("enable_overhang_speed"); bool has_overhang_speed = config->opt_bool_nullable("enable_overhang_speed", variant_index);
for (auto el : {"overhang_1_4_speed", "overhang_2_4_speed", "overhang_3_4_speed", "overhang_4_4_speed"}) for (auto el : {"overhang_1_4_speed", "overhang_2_4_speed", "overhang_3_4_speed", "overhang_4_4_speed"})
toggle_line(el, has_overhang_speed); toggle_line(el, has_overhang_speed, variant_index);
toggle_line("slowdown_for_curled_perimeters", has_overhang_speed); toggle_line("slowdown_for_curled_perimeters", has_overhang_speed, variant_index);
toggle_line("flush_into_objects", !is_global_config); toggle_line("flush_into_objects", !is_global_config);
src/slic3r/GUI/ConfigManipulation.hpp
+1 -1
View File
@@ -70,7 +70,7 @@ public:
// FFF print // FFF print
void update_print_fff_config(DynamicPrintConfig* config, const bool is_global_config = false, const bool is_plate_config = false); void update_print_fff_config(DynamicPrintConfig* config, const bool is_global_config = false, const bool is_plate_config = false);
void toggle_print_fff_options(DynamicPrintConfig* config, const bool is_global_config = false); void toggle_print_fff_options(DynamicPrintConfig* config, int variant_index, const bool is_global_config = false);
void apply_null_fff_config(DynamicPrintConfig *config, std::vector<std::string> const &keys, std::map<ObjectBase*, ModelConfig*> const & configs); void apply_null_fff_config(DynamicPrintConfig *config, std::vector<std::string> const &keys, std::map<ObjectBase*, ModelConfig*> const & configs);
//BBS: FFF filament nozzle temperature range //BBS: FFF filament nozzle temperature range
src/slic3r/GUI/GUI_ObjectSettings.cpp
+1 -1
View File
@@ -406,7 +406,7 @@ void ObjectSettings::update_config_values(ModelConfig* config)
printer_technology == ptFFF ? config_manipulation.update_print_fff_config(&main_config) : printer_technology == ptFFF ? config_manipulation.update_print_fff_config(&main_config) :
config_manipulation.update_print_sla_config(&main_config) ; config_manipulation.update_print_sla_config(&main_config) ;
printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&main_config) : printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&main_config, 0) :
config_manipulation.toggle_print_sla_options(&main_config) ; config_manipulation.toggle_print_sla_options(&main_config) ;
} }
src/slic3r/GUI/GUI_ObjectTableSettings.cpp
+2 -2
View File
@@ -300,7 +300,7 @@ bool ObjectTableSettings::update_settings_list(bool is_object, bool is_multiple_
bool is_BBL_printer = wxGetApp().preset_bundle->is_bbl_vendor(); bool is_BBL_printer = wxGetApp().preset_bundle->is_bbl_vendor();
config_manipulation.set_is_BBL_Printer(is_BBL_printer); config_manipulation.set_is_BBL_Printer(is_BBL_printer);
printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&m_current_config) : printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&m_current_config, 0) :
config_manipulation.toggle_print_sla_options(&m_current_config) ; config_manipulation.toggle_print_sla_options(&m_current_config) ;
optgroup->update_visibility(wxGetApp().get_mode()); optgroup->update_visibility(wxGetApp().get_mode());
} }
@@ -406,7 +406,7 @@ void ObjectTableSettings::update_config_values(bool is_object, ModelObject* obje
printer_technology == ptFFF ? config_manipulation.update_print_fff_config(&main_config) : printer_technology == ptFFF ? config_manipulation.update_print_fff_config(&main_config) :
config_manipulation.update_print_sla_config(&main_config) ; config_manipulation.update_print_sla_config(&main_config) ;
printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&main_config) : printer_technology == ptFFF ? config_manipulation.toggle_print_fff_options(&main_config, 0) :
config_manipulation.toggle_print_sla_options(&main_config) ; config_manipulation.toggle_print_sla_options(&main_config) ;
for (auto og : m_og_settings) { for (auto og : m_og_settings) {
og->update_visibility(wxGetApp().get_mode()); og->update_visibility(wxGetApp().get_mode());
src/slic3r/GUI/OptionsGroup.cpp
+1
View File
@@ -59,6 +59,7 @@ const t_field& OptionsGroup::build_field(const t_config_option_key& id, const Co
default: default:
switch (opt.type) { switch (opt.type) {
case coFloatOrPercent: case coFloatOrPercent:
case coFloatsOrPercents:
case coFloat: case coFloat:
case coFloats: case coFloats:
case coPercent: case coPercent:
src/slic3r/GUI/Tab.cpp
+93 -55
View File
@@ -511,8 +511,6 @@ void Tab::create_preset_tab()
m_actual_nozzle_volumes[extruder_id] = nozzle_type; m_actual_nozzle_volumes[extruder_id] = nozzle_type;
switch_excluder(extruder_id); switch_excluder(extruder_id);
reload_config();
update_changed_ui();
}); });
m_extruder_sync_box = new wxPanel(panel, wxID_ANY); m_extruder_sync_box = new wxPanel(panel, wxID_ANY);
m_extruder_sync_box->SetBackgroundColour(panel->GetBackgroundColour()); m_extruder_sync_box->SetBackgroundColour(panel->GetBackgroundColour());
@@ -2166,15 +2164,12 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
int extruder_idx = std::atoi(opt_key.substr(opt_key.find_last_of('#') + 1).c_str()); int extruder_idx = std::atoi(opt_key.substr(opt_key.find_last_of('#') + 1).c_str());
for (auto tab : wxGetApp().tabs_list) { for (auto tab : wxGetApp().tabs_list) {
tab->update_extruder_variants(extruder_idx); tab->update_extruder_variants(extruder_idx);
tab->reload_config();
} }
if (auto tab = wxGetApp().plate_tab) { if (auto tab = wxGetApp().plate_tab) {
tab->update_extruder_variants(extruder_idx); tab->update_extruder_variants(extruder_idx);
tab->reload_config();
} }
for (auto tab : wxGetApp().model_tabs_list) { for (auto tab : wxGetApp().model_tabs_list) {
tab->update_extruder_variants(extruder_idx); tab->update_extruder_variants(extruder_idx);
tab->reload_config();
} }
if (wxGetApp().app_config->get("auto_calculate_flush") == "all") { if (wxGetApp().app_config->get("auto_calculate_flush") == "all") {
wxGetApp().plater()->sidebar().auto_calc_flushing_volumes(-1,extruder_idx); wxGetApp().plater()->sidebar().auto_calc_flushing_volumes(-1,extruder_idx);
@@ -2756,66 +2751,66 @@ void TabPrint::build()
page = add_options_page(L("Speed"), "custom-gcode_speed"); // ORCA: icon only visible on placeholders page = add_options_page(L("Speed"), "custom-gcode_speed"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("First layer speed"), L"param_speed_first", 15); optgroup = page->new_optgroup(L("First layer speed"), L"param_speed_first", 15);
optgroup->append_single_option_line("initial_layer_speed", "speed_settings_initial_layer_speed#initial-layer"); optgroup->append_single_option_line("initial_layer_speed", "speed_settings_initial_layer_speed#initial-layer", 0);
optgroup->append_single_option_line("initial_layer_infill_speed", "speed_settings_initial_layer_speed#initial-layer-infill"); optgroup->append_single_option_line("initial_layer_infill_speed", "speed_settings_initial_layer_speed#initial-layer-infill", 0);
optgroup->append_single_option_line("initial_layer_travel_speed", "speed_settings_initial_layer_speed#initial-layer-travel-speed"); optgroup->append_single_option_line("initial_layer_travel_speed", "speed_settings_initial_layer_speed#initial-layer-travel-speed", 0);
optgroup->append_single_option_line("slow_down_layers", "speed_settings_initial_layer_speed#number-of-slow-layers"); optgroup->append_single_option_line("slow_down_layers", "speed_settings_initial_layer_speed#number-of-slow-layers");
optgroup = page->new_optgroup(L("Other layers speed"), L"param_speed", 15); optgroup = page->new_optgroup(L("Other layers speed"), L"param_speed", 15);
optgroup->append_single_option_line("outer_wall_speed", "speed_settings_other_layers_speed#outer-wall"); optgroup->append_single_option_line("outer_wall_speed", "speed_settings_other_layers_speed#outer-wall", 0);
optgroup->append_single_option_line("inner_wall_speed", "speed_settings_other_layers_speed#inner-wall", 0); optgroup->append_single_option_line("inner_wall_speed", "speed_settings_other_layers_speed#inner-wall", 0);
optgroup->append_single_option_line("small_perimeter_speed", "speed_settings_other_layers_speed#small-perimeters"); optgroup->append_single_option_line("small_perimeter_speed", "speed_settings_other_layers_speed#small-perimeters", 0);
optgroup->append_single_option_line("small_perimeter_threshold", "speed_settings_other_layers_speed#small-perimeters-threshold"); optgroup->append_single_option_line("small_perimeter_threshold", "speed_settings_other_layers_speed#small-perimeters-threshold", 0);
optgroup->append_single_option_line("sparse_infill_speed", "speed_settings_other_layers_speed#sparse-infill"); optgroup->append_single_option_line("sparse_infill_speed", "speed_settings_other_layers_speed#sparse-infill", 0);
optgroup->append_single_option_line("internal_solid_infill_speed", "speed_settings_other_layers_speed#internal-solid-infill"); optgroup->append_single_option_line("internal_solid_infill_speed", "speed_settings_other_layers_speed#internal-solid-infill", 0);
optgroup->append_single_option_line("top_surface_speed", "speed_settings_other_layers_speed#top-surface"); optgroup->append_single_option_line("top_surface_speed", "speed_settings_other_layers_speed#top-surface", 0);
optgroup->append_single_option_line("gap_infill_speed", "speed_settings_other_layers_speed#gap-infill"); optgroup->append_single_option_line("gap_infill_speed", "speed_settings_other_layers_speed#gap-infill", 0);
optgroup->append_single_option_line("ironing_speed", "speed_settings_other_layers_speed#ironing-speed"); optgroup->append_single_option_line("ironing_speed", "speed_settings_other_layers_speed#ironing-speed");
optgroup->append_single_option_line("support_speed", "speed_settings_other_layers_speed#support"); optgroup->append_single_option_line("support_speed", "speed_settings_other_layers_speed#support", 0);
optgroup->append_single_option_line("support_interface_speed", "speed_settings_other_layers_speed#support-interface"); optgroup->append_single_option_line("support_interface_speed", "speed_settings_other_layers_speed#support-interface", 0);
optgroup = page->new_optgroup(L("Overhang speed"), L"param_overhang_speed", 15); optgroup = page->new_optgroup(L("Overhang speed"), L"param_overhang_speed", 15);
optgroup->append_single_option_line("enable_overhang_speed", "speed_settings_overhang_speed#slow-down-for-overhang"); optgroup->append_single_option_line("enable_overhang_speed", "speed_settings_overhang_speed#slow-down-for-overhang", 0);
optgroup->append_single_option_line("slowdown_for_curled_perimeters", "speed_settings_overhang_speed#slow-down-for-curled-perimeters"); optgroup->append_single_option_line("slowdown_for_curled_perimeters", "speed_settings_overhang_speed#slow-down-for-curled-perimeters", 0);
Line line = { L("Overhang speed"), L("This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used") }; Line line = { L("Overhang speed"), L("This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used") };
line.label_path = "speed_settings_overhang_speed#speed"; line.label_path = "speed_settings_overhang_speed#speed";
line.append_option(optgroup->get_option("overhang_1_4_speed")); line.append_option(optgroup->get_option("overhang_1_4_speed", 0));
line.append_option(optgroup->get_option("overhang_2_4_speed")); line.append_option(optgroup->get_option("overhang_2_4_speed", 0));
line.append_option(optgroup->get_option("overhang_3_4_speed")); line.append_option(optgroup->get_option("overhang_3_4_speed", 0));
line.append_option(optgroup->get_option("overhang_4_4_speed")); line.append_option(optgroup->get_option("overhang_4_4_speed", 0));
optgroup->append_line(line); optgroup->append_line(line);
optgroup->append_separator(); optgroup->append_separator();
line = { L("Bridge"), L("Set speed for external and internal bridges") }; line = { L("Bridge"), L("Set speed for external and internal bridges") };
line.append_option(optgroup->get_option("bridge_speed")); line.append_option(optgroup->get_option("bridge_speed", 0));
line.append_option(optgroup->get_option("internal_bridge_speed")); line.append_option(optgroup->get_option("internal_bridge_speed", 0));
optgroup->append_line(line); optgroup->append_line(line);
optgroup = page->new_optgroup(L("Travel speed"), L"param_travel_speed", 15); optgroup = page->new_optgroup(L("Travel speed"), L"param_travel_speed", 15);
optgroup->append_single_option_line("travel_speed", "speed_settings_travel"); optgroup->append_single_option_line("travel_speed", "speed_settings_travel", 0);
optgroup = page->new_optgroup(L("Acceleration"), L"param_acceleration", 15); optgroup = page->new_optgroup(L("Acceleration"), L"param_acceleration", 15);
optgroup->append_single_option_line("default_acceleration", "speed_settings_acceleration#normal-printing"); optgroup->append_single_option_line("default_acceleration", "speed_settings_acceleration#normal-printing", 0);
optgroup->append_single_option_line("outer_wall_acceleration", "speed_settings_acceleration#outer-wall"); optgroup->append_single_option_line("outer_wall_acceleration", "speed_settings_acceleration#outer-wall", 0);
optgroup->append_single_option_line("inner_wall_acceleration", "speed_settings_acceleration#inner-wall"); optgroup->append_single_option_line("inner_wall_acceleration", "speed_settings_acceleration#inner-wall", 0);
optgroup->append_single_option_line("bridge_acceleration", "speed_settings_acceleration#bridge"); optgroup->append_single_option_line("bridge_acceleration", "speed_settings_acceleration#bridge", 0);
optgroup->append_single_option_line("sparse_infill_acceleration", "speed_settings_acceleration#sparse-infill"); optgroup->append_single_option_line("sparse_infill_acceleration", "speed_settings_acceleration#sparse-infill", 0);
optgroup->append_single_option_line("internal_solid_infill_acceleration", "speed_settings_acceleration#internal-solid-infill"); optgroup->append_single_option_line("internal_solid_infill_acceleration", "speed_settings_acceleration#internal-solid-infill", 0);
optgroup->append_single_option_line("initial_layer_acceleration", "speed_settings_acceleration#initial-layer"); optgroup->append_single_option_line("initial_layer_acceleration", "speed_settings_acceleration#initial-layer", 0);
optgroup->append_single_option_line("initial_layer_travel_acceleration", "speed_settings_acceleration#initial-layer-travel"); optgroup->append_single_option_line("initial_layer_travel_acceleration", "speed_settings_acceleration#initial-layer-travel", 0);
optgroup->append_single_option_line("top_surface_acceleration", "speed_settings_acceleration#top-surface"); optgroup->append_single_option_line("top_surface_acceleration", "speed_settings_acceleration#top-surface", 0);
optgroup->append_single_option_line("travel_acceleration", "speed_settings_acceleration#travel"); optgroup->append_single_option_line("travel_acceleration", "speed_settings_acceleration#travel", 0);
optgroup->append_single_option_line("accel_to_decel_enable", "speed_settings_acceleration"); optgroup->append_single_option_line("accel_to_decel_enable", "speed_settings_acceleration");
optgroup->append_single_option_line("accel_to_decel_factor", "speed_settings_acceleration"); optgroup->append_single_option_line("accel_to_decel_factor", "speed_settings_acceleration");
optgroup = page->new_optgroup(L("Jerk(XY)"), L"param_jerk", 15); optgroup = page->new_optgroup(L("Jerk(XY)"), L"param_jerk", 15);
optgroup->append_single_option_line("default_junction_deviation", "speed_settings_jerk_xy#junction-deviation"); optgroup->append_single_option_line("default_junction_deviation", "speed_settings_jerk_xy#junction-deviation", 0);
optgroup->append_single_option_line("default_jerk", "speed_settings_jerk_xy#default"); optgroup->append_single_option_line("default_jerk", "speed_settings_jerk_xy#default", 0);
optgroup->append_single_option_line("outer_wall_jerk", "speed_settings_jerk_xy#outer-wall"); optgroup->append_single_option_line("outer_wall_jerk", "speed_settings_jerk_xy#outer-wall", 0);
optgroup->append_single_option_line("inner_wall_jerk", "speed_settings_jerk_xy#inner-wall"); optgroup->append_single_option_line("inner_wall_jerk", "speed_settings_jerk_xy#inner-wall", 0);
optgroup->append_single_option_line("infill_jerk", "speed_settings_jerk_xy#infill"); optgroup->append_single_option_line("infill_jerk", "speed_settings_jerk_xy#infill", 0);
optgroup->append_single_option_line("top_surface_jerk", "speed_settings_jerk_xy#top-surface"); optgroup->append_single_option_line("top_surface_jerk", "speed_settings_jerk_xy#top-surface", 0);
optgroup->append_single_option_line("initial_layer_jerk", "speed_settings_jerk_xy#initial-layer"); optgroup->append_single_option_line("initial_layer_jerk", "speed_settings_jerk_xy#initial-layer", 0);
optgroup->append_single_option_line("initial_layer_travel_jerk", "speed_settings_jerk_xy#initial-layer-travel"); optgroup->append_single_option_line("initial_layer_travel_jerk", "speed_settings_jerk_xy#initial-layer-travel", 0);
optgroup->append_single_option_line("travel_jerk", "speed_settings_jerk_xy#travel"); optgroup->append_single_option_line("travel_jerk", "speed_settings_jerk_xy#travel", 0);
optgroup = page->new_optgroup(L("Advanced"), L"param_advanced", 15); optgroup = page->new_optgroup(L("Advanced"), L"param_advanced", 15);
optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope", "speed_settings_advanced"); optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope", "speed_settings_advanced");
@@ -3075,7 +3070,7 @@ void TabPrint::toggle_options()
m_config_manipulation.set_is_BBL_Printer(is_BBL_printer); m_config_manipulation.set_is_BBL_Printer(is_BBL_printer);
} }
m_config_manipulation.toggle_print_fff_options(m_config, m_type < Preset::TYPE_COUNT); m_config_manipulation.toggle_print_fff_options(m_config, int(intptr_t(m_extruder_switch->GetClientData())), m_type < Preset::TYPE_COUNT);
Field *field = m_active_page->get_field("support_style"); Field *field = m_active_page->get_field("support_style");
auto support_type = m_config->opt_enum<SupportType>("support_type"); auto support_type = m_config->opt_enum<SupportType>("support_type");
@@ -4653,6 +4648,40 @@ wxSizer* Tab::description_line_widget(wxWindow* parent, ogStaticText* *StaticTex
return sizer; return sizer;
} }
void Tab::update_pages_with_multi_variant()
{
if (!m_active_page) {
return;
}
// TODO: Orca: support multi variant field
//for (auto optgroup : m_active_page->m_optgroups) {
// Field *multi_variant_field = nullptr;
// std::string opt_key;
// for (const auto& opt : multi_variant_text_ctrl_options) {
// Field* field = optgroup->get_fieldc(opt, 0);
// if (field) {
// auto *multi_variant = dynamic_cast<MultiVariantTextCtrl *>(field);
// if (multi_variant) {;
// multi_variant_field = field;
// opt_key = opt;
// }
// break;
// }
// }
// if (multi_variant_field) {
// auto * multi_variant_ctrl = dynamic_cast<MultiVariantTextCtrl*>(multi_variant_field);
// multi_variant_ctrl->refresh_text_ctrls_layout(optgroup->ctrl_parent());
// if (optgroup->custom_ctrl) {
// optgroup->custom_ctrl->update_line_height_for_field(opt_key);
// }
// }
// m_page_view->GetParent()->Layout();
// m_parent->Layout();
//}
update_changed_ui();
}
bool Tab::saved_preset_is_dirty() const { return m_presets->saved_is_dirty(); } bool Tab::saved_preset_is_dirty() const { return m_presets->saved_is_dirty(); }
void Tab::update_saved_preset_from_current_preset() { m_presets->update_saved_preset_from_current_preset(); } void Tab::update_saved_preset_from_current_preset() { m_presets->update_saved_preset_from_current_preset(); }
bool Tab::current_preset_is_dirty() const { return m_presets->current_is_dirty(); } bool Tab::current_preset_is_dirty() const { return m_presets->current_is_dirty(); }
@@ -5927,7 +5956,6 @@ void Tab::load_current_preset()
update_btns_enabling(); update_btns_enabling();
update();
if (m_type == Slic3r::Preset::TYPE_PRINTER) { if (m_type == Slic3r::Preset::TYPE_PRINTER) {
// For the printer profile, generate the extruder pages. // For the printer profile, generate the extruder pages.
if (preset.printer_technology() == ptFFF) { if (preset.printer_technology() == ptFFF) {
@@ -5938,21 +5966,20 @@ void Tab::load_current_preset()
else else
wxGetApp().obj_list()->update_objects_list_filament_column(1); wxGetApp().obj_list()->update_objects_list_filament_column(1);
} }
// Reload preset pages with the new configuration values.
update_extruder_variants();
if (m_type == Preset::TYPE_PRINT) { if (m_type == Preset::TYPE_PRINT) {
if (auto tab = wxGetApp().plate_tab) { if (auto tab = wxGetApp().plate_tab) {
tab->m_config->apply(*m_config); tab->m_config->apply(*m_config);
tab->update_extruder_variants(); tab->update_extruder_variants();
tab->reload_config();
} }
for (auto tab : wxGetApp().model_tabs_list) { for (auto tab : wxGetApp().model_tabs_list) {
tab->m_config->apply(*m_config); tab->m_config->apply(*m_config);
tab->update_extruder_variants(); tab->update_extruder_variants();
tab->reload_config();
} }
} }
update();
// Reload preset pages with the new configuration values.
update_extruder_variants(-1, false);
reload_config(); reload_config();
update_ui_items_related_on_parent_preset(m_presets->get_selected_preset_parent()); update_ui_items_related_on_parent_preset(m_presets->get_selected_preset_parent());
@@ -7559,7 +7586,7 @@ void Tab::set_just_edit(bool just_edit)
/// </summary> /// </summary>
/// <param name="extruder_id"></param> /// <param name="extruder_id"></param>
void Tab::update_extruder_variants(int extruder_id) void Tab::update_extruder_variants(int extruder_id, bool reload)
{ {
BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << extruder_id; BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << extruder_id;
if (m_extruder_switch) { if (m_extruder_switch) {
@@ -7601,7 +7628,10 @@ void Tab::update_extruder_variants(int extruder_id)
m_variant_combo->Enable(options.size() > 1); m_variant_combo->Enable(options.size() > 1);
} }
switch_excluder(extruder_id); switch_excluder(extruder_id, reload);
if (m_type == Preset::TYPE_PRINT) {
update_pages_with_multi_variant();
}
if (m_variant_sizer) { if (m_variant_sizer) {
wxWindow *variant_ctrl = m_extruder_switch ? (wxWindow *) m_extruder_switch : m_variant_combo; wxWindow *variant_ctrl = m_extruder_switch ? (wxWindow *) m_extruder_switch : m_variant_combo;
m_main_sizer->Show(m_variant_sizer, variant_ctrl->IsThisEnabled() && m_active_page && !m_active_page->m_opt_id_map.empty() && !m_active_page->title().StartsWith("Extruder ")); m_main_sizer->Show(m_variant_sizer, variant_ctrl->IsThisEnabled() && m_active_page && !m_active_page->m_opt_id_map.empty() && !m_active_page->title().StartsWith("Extruder "));
@@ -7756,7 +7786,7 @@ bool Tab::get_extruder_sync_enable_state(int extruder_id)
return false; return false;
} }
void Tab::switch_excluder(int extruder_id) void Tab::switch_excluder(int extruder_id, bool reload)
{ {
Preset & printer_preset = m_preset_bundle->printers.get_edited_preset(); Preset & printer_preset = m_preset_bundle->printers.get_edited_preset();
auto nozzle_volumes = m_preset_bundle->project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type"); auto nozzle_volumes = m_preset_bundle->project_config.option<ConfigOptionEnumsGeneric>("nozzle_volume_type");
@@ -7826,6 +7856,14 @@ void Tab::switch_excluder(int extruder_id)
} }
} }
} }
if (reload) {
reload_config();
update_changed_ui();
toggle_options();
if (m_active_page)
m_active_page->update_visibility(m_mode, true);
m_page_view->GetParent()->Layout();
}
} }
void Tab::sync_excluder() void Tab::sync_excluder()
src/slic3r/GUI/Tab.hpp
+3 -2
View File
@@ -405,6 +405,7 @@ public:
bool current_preset_is_dirty() const; bool current_preset_is_dirty() const;
bool saved_preset_is_dirty() const; bool saved_preset_is_dirty() const;
void update_saved_preset_from_current_preset(); void update_saved_preset_from_current_preset();
void update_pages_with_multi_variant();
DynamicPrintConfig* get_config() { return m_config; } DynamicPrintConfig* get_config() { return m_config; }
PresetCollection * get_presets() { return m_presets; } PresetCollection * get_presets() { return m_presets; }
@@ -437,8 +438,8 @@ public:
virtual const std::string& get_custom_gcode(const t_config_option_key& opt_key); virtual const std::string& get_custom_gcode(const t_config_option_key& opt_key);
virtual void set_custom_gcode(const t_config_option_key& opt_key, const std::string& value); virtual void set_custom_gcode(const t_config_option_key& opt_key, const std::string& value);
void update_extruder_variants(int extruder_id = -1); void update_extruder_variants(int extruder_id = -1, bool reload = true);
void switch_excluder(int extruder_id = -1); void switch_excluder(int extruder_id = -1, bool reload = true);
void sync_excluder(); void sync_excluder();
void parse_extruder_selection(int selection, int &extruder_id, NozzleVolumeType &nozzle_type); void parse_extruder_selection(int selection, int &extruder_id, NozzleVolumeType &nozzle_type);
int calculate_selection_index_for_extruder(int extruder_id, NozzleVolumeType nozzle_type); int calculate_selection_index_for_extruder(int extruder_id, NozzleVolumeType nozzle_type);