Add Flashforge guider 2s (#5165)

* Add Guider 2s 0.4

* Add Guider 2s cover & build plate texture/model & fix missing Guider 3 Ultra build plate model

* Add extruder_offset

* Change G-Code

* Misc

Add 0.3, 0.6, & 0.8 nozzle sizes
Add supported filaments

* Revert "Misc"

This reverts commit 94ebc2c52d.

* Re-add filaments

* G-Code fixes

* Fix printable area

* Resolve merge conflicts part 1

* Revert "Resolve merge conflicts part 1"

This reverts commit 2d6132a01d.

* fix merge conflict part 1.5

* Fix merge conflicts 1.75

* Fix merge conflicts part 2

* Remove old buildplate model

* Fix old buildplate model

* Change bed origin, max speeds, & max/min layer heights

* Remove absolute positioning in G-Code

* Lower acceleration

* Add lid clearance info

* Revert "Remove absolute positioning in G-Code"

This reverts commit 5253d32003.

* Re-enable absolute distances

* Fix syntax

* Change these too...

* Bring closer to original slicer

* forgot these

* Change to match @AC5SHOT optimal settings

* Bring closer to original slicer

* Bring closer to original slicer

* Update machine limits/functionality

resources/profiles/Flashforge/machine/Flashforge Guider 2s 0.4 nozzle.json

@@ -0,0 +1,60 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Flashforge Guider 2s 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_flashforge_common",
+	"printer_model": "Flashforge Guider 2s",
+	"gcode_flavor": "marlin",
+	"default_print_profile": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
+	"nozzle_diameter": [ "0.4" ],
+	"printer_variant": "0.4",
+	"printable_area": [
+		"-140x-125",
+        	"140x-125",
+        	"140x125",
+        	"-140x125"
+	],
+	"printable_height": "300",
+	"extruder_offset": [ "-20", "10" ],
+	"extruder_clearance_height_to_lid": "70",
+    	"extruder_clearance_height_to_rod": "23",
+    	"extruder_clearance_radius": "40",
+	"use_relative_e_distances": "0",
+	"auxiliary_fan": "1",
+	"machine_max_acceleration_e": [ "200", "200" ],
+	"machine_max_acceleration_extruding": [ "200", "200" ],
+	"machine_max_acceleration_retracting": [ "200", "200" ],
+	"machine_max_acceleration_travel": [ "200", "200" ],
+	"machine_max_acceleration_x": [ "200", "200" ],
+	"machine_max_acceleration_y": [ "200", "200" ],
+	"machine_max_acceleration_z": [ "200", "200" ],
+	"machine_max_speed_e": [ "100", "100" ],
+	"machine_max_speed_x": [ "200", "200" ],
+	"machine_max_speed_y": [ "200", "200" ],
+	"machine_max_speed_z": [ "20", "20" ],
+	"machine_max_jerk_e": [ "2.5", "2.5" ],
+	"machine_max_jerk_x": [ "9", "9" ],
+	"machine_max_jerk_y": [ "9", "9" ],
+	"machine_max_jerk_z": [ "3", "3" ],
+	"max_layer_height": [ "0.8" ],
+	"min_layer_height": [ "0.02" ],
+	"printer_settings_id": "Flashforge",
+	"retraction_minimum_travel": [ "1" ],
+	"retract_before_wipe": [ "100%" ],
+	"retraction_length": [ "1" ],
+	"retract_length_toolchange": [ "2" ],
+	"retraction_speed": [ "100" ],
+	"z_hop": [ "0" ],
+	"single_extruder_multi_material": "0",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M25",
+	"default_filament_profile": [ "Flashforge Generic PLA" ],
+	"machine_start_gcode": "M118 X10 Y10 Z10\nM140 S[bed_temperature_initial_layer_single]; set initial bed temp\nM104 S[nozzle_temperature_initial_layer] T0; set initial extruder temp\nM107; disable cooling fan\nG90; set to absolute positioning\nG28; home axes\nM132 X Y A B; recall home offsets from EPROM\nG1 Z50.0 F420; adjust Z\nG161 X Y F3300\nM7; wait for bed to stabilize\nM6 T0; wait for extruder to stabilize\nM651 S255; start case fan\nG1 Z0.3 F3600; move down to purge\nG92 E0; zero extruders\nG1 X120 Y-125 E20 F2000; extrude a line of filament across the front edge of the bed\nG1 X130 Y-125 F180; wait for ooze\nG1 X140 Y-125 F5000; fast wipe\nG1 Z1 F100; lift\nG92 E0; zero extruders again\nG1 E-1.0000 F1800",
+	"machine_end_gcode": "M104 S0 T0; cool down extruder\nM140 S0 T0; cool down bed\nG162 Z F1800\nG28 X Y; home axes\nM132 X Y A B; recall home offsets from EPROM\nM652; turn off rear fan\nG91; set to relative positioning\nM18; disable stepper motors",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"wipe_distance": "2",
+	"nozzle_type": "undefined"
+}

resources/profiles/Flashforge/machine/Flashforge Guider 2s.json

@@ -0,0 +1,12 @@
+{
+  "type": "machine_model",
+  "name": "Flashforge Guider 2s",
+  "model_id": "Flashforge-Guider-2s",
+  "nozzle_diameter": "0.4",
+  "machine_tech": "FFF",
+  "family": "Flashforge",
+  "bed_model": "flashforge_g2s_buildplate_model.stl",
+  "bed_texture": "flashforge_g2s_buildplate_texture.png",
+  "hotend_model": "",
+  "default_materials": "Flashforge Generic PVA;Flashforge Generic HIPS;Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG @G3U;Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA @G3U;Flashforge Generic ASA @G3U;Flashforge Generic ABS @G3U;FusRock Generic PET-CF;FusRock Generic PAHT-CF;FusRock Generic NexPA-CF25;FusRock Generic S-Multi;FusRock Generic S-PAHT;Polymaker Generic CoPA;Polymaker Generic S1"
+}

resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json

@@ -5,7 +5,7 @@
   "nozzle_diameter": "0.4",
   "machine_tech": "FFF",
   "family": "Flashforge",
-  "bed_model": "flashfoge_g3u_buildplate_model.STL",
+  "bed_model": "flashforge_g3u_buildplate_model.stl",
   "bed_texture": "flashforge_g3u_buildplate_texture.png",
   "hotend_model": "",
   "default_materials": "Flashforge Generic PVA;Flashforge Generic HIPS;Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG @G3U;Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA @G3U;Flashforge Generic ASA @G3U;Flashforge Generic ABS @G3U;FusRock Generic PET-CF;FusRock Generic PAHT-CF;FusRock Generic NexPA-CF25;FusRock Generic S-Multi;FusRock Generic S-PAHT;Polymaker Generic CoPA;Polymaker Generic S1"