Update translations. Update warning messages to be more user friendly. Update gradient color chips in publish dialog

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-08-21 14:25+0800\n"
+"POT-Creation-Date: 2026-08-28 12:15+0800\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -2913,6 +2913,9 @@ msgstr "編輯"
 msgid "Merge with"
 msgstr "合併到"
 
+msgid "Decompose Color"
+msgstr ""
+
 msgid "Delete this filament"
 msgstr "刪除此線材"
 
@@ -3209,6 +3212,9 @@ msgstr "組合體"
 msgid "Merge parts to an object"
 msgstr "合併零件為物件"
 
+msgid "Using variable layer height together with mixed color sublayer may result in poor color mixing quality."
+msgstr ""
+
 # AI Translated
 msgid "Add layers"
 msgstr "新增層"
@@ -7805,6 +7811,9 @@ msgstr "自訂列印板參數"
 msgid "The %s nozzle can not print %s."
 msgstr "%s 噴嘴無法列印 %s。"
 
+msgid "Printing mixed-color filament on a single-extruder printer requires frequent filament changes and flushing, which may significantly increase waste and the risk of nozzle / waste-chute clogging."
+msgstr ""
+
 #, boost-format
 msgid "Mixing %1% with %2% in printing is not recommended.\n"
 msgstr "不建議在列印時混用 %1% 和 %2%。\n"
@@ -7930,12 +7939,36 @@ msgstr "從 AMS 同步線材清單"
 msgid "Set filaments to use"
 msgstr "設定可選擇的線材"
 
+msgid "Add Mixed Filament"
+msgstr ""
+
+msgid "Mixed Filament"
+msgstr ""
+
+msgid "Remove last mixed filament"
+msgstr ""
+
+msgid "Add mixed filament"
+msgstr ""
+
+msgid "Mixed filament has invalid or mismatched components. Please re-edit affected entries."
+msgstr ""
+
 msgid "Search plate, object and part."
 msgstr "搜尋列印板、物件和零件。"
 
 msgid "Pellets"
 msgstr "顆粒"
 
+msgid "Mixed filament has broken component references"
+msgstr ""
+
+msgid "Edit / Delete / Merge"
+msgstr ""
+
+msgid "The target mixed filament uses this physical filament as a component. Merging will remove this physical filament and may invalidate the mixed filament. Continue?"
+msgstr ""
+
 #, c-format, boost-format
 msgid "After completing your operation, %s project will be closed and create a new project."
 msgstr "完成操作後，%s 專案將關閉並建立新專案。"
@@ -8122,6 +8155,12 @@ msgstr ""
 msgid "Multi-part object detected"
 msgstr "偵測到多部分物件"
 
+msgid "Matching textures to filaments"
+msgstr ""
+
+msgid "Texture Import Warning"
+msgstr ""
+
 msgid "Load these files as a single object with multiple parts?\n"
 msgstr "將這些檔案載入為一個多零件物件？\n"
 
@@ -8332,6 +8371,18 @@ msgstr ""
 msgid "Sync now"
 msgstr "立即同步"
 
+msgid "Texture import failed. The model appears to contain texture data, but the texture import process could not be completed. The model will be imported as geometry only."
+msgstr ""
+
+msgid "Applying texture colors..."
+msgstr ""
+
+msgid "Updating 3D view..."
+msgstr ""
+
+msgid "Texture colors applied."
+msgstr ""
+
 msgid "You can keep the modified presets for the new project or discard them"
 msgstr "您可以將修改後的預設檔保留到新專案中或者忽略這些修改"
 
@@ -9586,6 +9637,9 @@ msgstr "螺旋花瓶模式"
 msgid "First layer filament sequence"
 msgstr "首層線材列印順序"
 
+msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect."
+msgstr ""
+
 msgid "By Layer"
 msgstr "逐層"
 
@@ -9631,18 +9685,58 @@ msgstr "跳至網頁"
 msgid "Material"
 msgstr ""
 
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+msgid "needs"
+msgstr ""
+
+msgid "not enabled"
+msgstr ""
+
+msgid "material not published"
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
 msgid "Publish 3MF..."
 msgstr ""
 
 msgid "Select which settings to embed in the 3MF file"
 msgstr ""
 
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
 msgid "Full Publish"
 msgstr ""
 
 msgid "Embed the entire filament of this slot in the 3MF file"
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
 msgid "Filter non-selected"
 msgstr ""
 
@@ -12233,6 +12327,9 @@ msgstr "如果您仍想列印，可以在「偏好設定 / 控制 / 切片 / 移
 msgid "No extrusions under current settings."
 msgstr "根據目前設定，不會進行任何列印。"
 
+msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed."
+msgstr ""
+
 msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled."
 msgstr "逐件列印模式下不支援使用平滑模式的縮時錄影。"
 
@@ -12269,6 +12366,9 @@ msgstr "您可能想要減小模型的尺寸或更改目前的列印設定並重
 msgid "Variable layer height is not supported with Organic supports."
 msgstr "有機樹支撐不支持可變層高。"
 
+msgid "The wipe tower filament cannot be a mixed filament."
+msgstr ""
+
 msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution."
 msgstr "當啟用換料時，不同的噴嘴直徑和線材直徑可能無法正常配合。此功能屬於實驗性階段，請小心使用。"
 
@@ -14251,6 +14351,48 @@ msgstr "支撐材料"
 msgid "Support material is commonly used to print supports and support interfaces."
 msgstr "支撐材料通常用於列印支撐體和支撐接觸面"
 
+msgid "Is mixed filament"
+msgstr ""
+
+msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments"
+msgstr ""
+
+msgid "Mixed filament components"
+msgstr ""
+
+msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\""
+msgstr ""
+
+msgid "Mixed filament sublayer ratios"
+msgstr ""
+
+msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\""
+msgstr ""
+
+msgid "Mixed filament gradient"
+msgstr ""
+
+msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers."
+msgstr ""
+
+msgid "Mixed filament gradient range"
+msgstr ""
+
+msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%."
+msgstr ""
+
+msgid "Mixed filament gradient curve"
+msgstr ""
+
+msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead."
+msgstr ""
+
+msgid "Mixed filament per-part gradient"
+msgstr ""
+
+msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range."
+msgstr ""
+
 msgid "Filament printable"
 msgstr "線材可列印"
 
@@ -17079,6 +17221,12 @@ msgstr ""
 "\n"
 "在以下的『擦拭前的回抽量』設定中設定一個值，將在擦拭之前執行任何額外的回抽操作；否則，將在擦拭之後執行。"
 
+msgid "Mixed color sublayer"
+msgstr ""
+
+msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects."
+msgstr ""
+
 msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects."
 msgstr "換料塔的功能是用於清除噴嘴上的殘留物，同時穩定噴嘴內的壓力，從而避免列印物件時出現外觀瑕疵。"
 
@@ -18148,6 +18296,9 @@ msgstr "模型檔案網格化失敗或沒有有效形狀"
 msgid "The supplied file couldn't be read because it's empty."
 msgstr "無法讀取提供的檔案，因為該檔案為空"
 
+msgid "The file format is incompatible and cannot be parsed."
+msgstr ""
+
 msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension."
 msgstr "檔案格式未知。輸入的檔案必須是 .stl、.obj 或 .amf(.xml) 格式。"