Update translations. Update warning messages to be more user friendly. Update gradient color chips in publish dialog

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-08-21 14:25+0800\n"
+"POT-Creation-Date: 2026-08-28 12:15+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -3197,6 +3197,9 @@ msgstr "Bewerken"
 msgid "Merge with"
 msgstr "Samenvoegen met"
 
+msgid "Decompose Color"
+msgstr ""
+
 # AI Translated
 msgid "Delete this filament"
 msgstr "Dit filament verwijderen"
@@ -3519,6 +3522,9 @@ msgstr "Montage"
 msgid "Merge parts to an object"
 msgstr "Onderdelen samenvoegen tot een object"
 
+msgid "Using variable layer height together with mixed color sublayer may result in poor color mixing quality."
+msgstr ""
+
 # AI Translated
 msgid "Add layers"
 msgstr "Lagen toevoegen"
@@ -8558,6 +8564,9 @@ msgstr "Huidig printbed aanpassen"
 msgid "The %s nozzle can not print %s."
 msgstr "Het %s-mondstuk kan %s niet printen."
 
+msgid "Printing mixed-color filament on a single-extruder printer requires frequent filament changes and flushing, which may significantly increase waste and the risk of nozzle / waste-chute clogging."
+msgstr ""
+
 # AI Translated
 #, boost-format
 msgid "Mixing %1% with %2% in printing is not recommended.\n"
@@ -8701,6 +8710,21 @@ msgstr "Synchroniseer filamentlijst vanuit AMS"
 msgid "Set filaments to use"
 msgstr "Stel filamenten in om te gebruiken"
 
+msgid "Add Mixed Filament"
+msgstr ""
+
+msgid "Mixed Filament"
+msgstr ""
+
+msgid "Remove last mixed filament"
+msgstr ""
+
+msgid "Add mixed filament"
+msgstr ""
+
+msgid "Mixed filament has invalid or mismatched components. Please re-edit affected entries."
+msgstr ""
+
 msgid "Search plate, object and part."
 msgstr "Zoek plaat, object en onderdeel."
 
@@ -8708,6 +8732,15 @@ msgstr "Zoek plaat, object en onderdeel."
 msgid "Pellets"
 msgstr "Pellets"
 
+msgid "Mixed filament has broken component references"
+msgstr ""
+
+msgid "Edit / Delete / Merge"
+msgstr ""
+
+msgid "The target mixed filament uses this physical filament as a component. Merging will remove this physical filament and may invalidate the mixed filament. Continue?"
+msgstr ""
+
 # AI Translated
 #, c-format, boost-format
 msgid "After completing your operation, %s project will be closed and create a new project."
@@ -8915,6 +8948,12 @@ msgstr ""
 msgid "Multi-part object detected"
 msgstr "Object met meerdere onderdelen gedetecteerd"
 
+msgid "Matching textures to filaments"
+msgstr ""
+
+msgid "Texture Import Warning"
+msgstr ""
+
 msgid "Load these files as a single object with multiple parts?\n"
 msgstr "Wilt u deze bestanden laden als een enkel object bestaande uit meerdere onderdelen?\n"
 
@@ -9146,6 +9185,18 @@ msgstr ""
 msgid "Sync now"
 msgstr "Nu synchroniseren"
 
+msgid "Texture import failed. The model appears to contain texture data, but the texture import process could not be completed. The model will be imported as geometry only."
+msgstr ""
+
+msgid "Applying texture colors..."
+msgstr ""
+
+msgid "Updating 3D view..."
+msgstr ""
+
+msgid "Texture colors applied."
+msgstr ""
+
 msgid "You can keep the modified presets for the new project or discard them"
 msgstr "Je kunt de aangepaste voorinstellingen bewaren voor het nieuwe project of ze laten vervallen"
 
@@ -10550,6 +10601,9 @@ msgstr "Spiraalvaas"
 msgid "First layer filament sequence"
 msgstr "Eerste laag filamentvolgorde"
 
+msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect."
+msgstr ""
+
 msgid "By Layer"
 msgstr "Op laag"
 
@@ -10596,18 +10650,58 @@ msgstr "Ga naar de website"
 msgid "Material"
 msgstr ""
 
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+msgid "needs"
+msgstr ""
+
+msgid "not enabled"
+msgstr ""
+
+msgid "material not published"
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
 msgid "Publish 3MF..."
 msgstr ""
 
 msgid "Select which settings to embed in the 3MF file"
 msgstr ""
 
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
 msgid "Full Publish"
 msgstr ""
 
 msgid "Embed the entire filament of this slot in the 3MF file"
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
 msgid "Filter non-selected"
 msgstr ""
 
@@ -13448,6 +13542,9 @@ msgstr "Als u toch wilt printen, kunt u de optie inschakelen via Voorkeuren / Be
 msgid "No extrusions under current settings."
 msgstr "Geen extrusion onder de huidige instellingen"
 
+msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed."
+msgstr ""
+
 msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled."
 msgstr "Vloeiende modus van timelapse wordt niet ondersteund wanneer \"per object\" sequentie is ingeschakeld."
 
@@ -13490,6 +13587,9 @@ msgstr "Verklein eventueel uw model of wijzig de huidige printinstellingen en pr
 msgid "Variable layer height is not supported with Organic supports."
 msgstr "Variabele laaghoogte wordt niet ondersteund met organische steunen."
 
+msgid "The wipe tower filament cannot be a mixed filament."
+msgstr ""
+
 # AI Translated
 msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution."
 msgstr "Verschillende mondstukdiameters en verschillende filamentdiameters werken mogelijk niet goed wanneer de prime toren is ingeschakeld. Dit is zeer experimenteel; ga daarom voorzichtig te werk."
@@ -15762,6 +15862,48 @@ msgstr "Support materiaal"
 msgid "Support material is commonly used to print supports and support interfaces."
 msgstr "Support materiaal wordt vaak gebruikt om support en support interfaces af te drukken."
 
+msgid "Is mixed filament"
+msgstr ""
+
+msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments"
+msgstr ""
+
+msgid "Mixed filament components"
+msgstr ""
+
+msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\""
+msgstr ""
+
+msgid "Mixed filament sublayer ratios"
+msgstr ""
+
+msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\""
+msgstr ""
+
+msgid "Mixed filament gradient"
+msgstr ""
+
+msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers."
+msgstr ""
+
+msgid "Mixed filament gradient range"
+msgstr ""
+
+msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%."
+msgstr ""
+
+msgid "Mixed filament gradient curve"
+msgstr ""
+
+msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead."
+msgstr ""
+
+msgid "Mixed filament per-part gradient"
+msgstr ""
+
+msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range."
+msgstr ""
+
 # AI Translated
 msgid "Filament printable"
 msgstr "Filament printbaar"
@@ -18985,6 +19127,12 @@ msgstr ""
 "\n"
 "Als u hieronder een waarde instelt bij de terugtrekhoeveelheid vóór het vegen, wordt de overtollige terugtrekking vóór het vegen uitgevoerd; anders gebeurt dat erna."
 
+msgid "Mixed color sublayer"
+msgstr ""
+
+msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects."
+msgstr ""
+
 msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects."
 msgstr "De veegtoren kan worden gebruikt om resten op het mondstuk te verwijderen en de druk in het mondstuk te stabiliseren om uiterlijke gebreken bij het printen van objecten te voorkomen."
 
@@ -20251,6 +20399,9 @@ msgstr "Het meshen van een modelbestand is mislukt of er is geen geldige vorm."
 msgid "The supplied file couldn't be read because it's empty."
 msgstr "Het opgegeven bestand kon niet worden gelezen omdat het leeg is."
 
+msgid "The file format is incompatible and cannot be parsed."
+msgstr ""
+
 # AI Translated
 msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension."
 msgstr "Onbekende bestandsindeling: het invoerbestand moet de extensie .stl, .obj of .amf(.xml) hebben."