Update translations. Update warning messages to be more user friendly. Update gradient color chips in publish dialog

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-08-21 14:25+0800\n"
+"POT-Creation-Date: 2026-08-28 12:15+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2969,6 +2969,9 @@ msgstr "編集"
 msgid "Merge with"
 msgstr "結合"
 
+msgid "Decompose Color"
+msgstr ""
+
 msgid "Delete this filament"
 msgstr "このフィラメントを削除"
 
@@ -3266,6 +3269,9 @@ msgstr "アセンブリ"
 msgid "Merge parts to an object"
 msgstr "パーツをオブジェクトに結合"
 
+msgid "Using variable layer height together with mixed color sublayer may result in poor color mixing quality."
+msgstr ""
+
 # AI Translated
 msgid "Add layers"
 msgstr "積層を追加"
@@ -7865,6 +7871,9 @@ msgstr "現在のプレートをカスタマイズ"
 msgid "The %s nozzle can not print %s."
 msgstr "%sノズルは%sを印刷できません。"
 
+msgid "Printing mixed-color filament on a single-extruder printer requires frequent filament changes and flushing, which may significantly increase waste and the risk of nozzle / waste-chute clogging."
+msgstr ""
+
 #, boost-format
 msgid "Mixing %1% with %2% in printing is not recommended.\n"
 msgstr "%1%と%2%を混合して印刷することは推奨されません。\n"
@@ -7990,12 +7999,36 @@ msgstr "AMSと素材を同期"
 msgid "Set filaments to use"
 msgstr "フィラメントを選択"
 
+msgid "Add Mixed Filament"
+msgstr ""
+
+msgid "Mixed Filament"
+msgstr ""
+
+msgid "Remove last mixed filament"
+msgstr ""
+
+msgid "Add mixed filament"
+msgstr ""
+
+msgid "Mixed filament has invalid or mismatched components. Please re-edit affected entries."
+msgstr ""
+
 msgid "Search plate, object and part."
 msgstr "プレート、オブジェクト、パーツを検索。"
 
 msgid "Pellets"
 msgstr "ペレット"
 
+msgid "Mixed filament has broken component references"
+msgstr ""
+
+msgid "Edit / Delete / Merge"
+msgstr ""
+
+msgid "The target mixed filament uses this physical filament as a component. Merging will remove this physical filament and may invalidate the mixed filament. Continue?"
+msgstr ""
+
 #, c-format, boost-format
 msgid "After completing your operation, %s project will be closed and create a new project."
 msgstr "操作完了後、%sプロジェクトが閉じられ、新しいプロジェクトが作成されます。"
@@ -8188,6 +8221,12 @@ msgstr ""
 msgid "Multi-part object detected"
 msgstr "マルチパーツ検出"
 
+msgid "Matching textures to filaments"
+msgstr ""
+
+msgid "Texture Import Warning"
+msgstr ""
+
 msgid "Load these files as a single object with multiple parts?\n"
 msgstr "これらのファイルを一つのオブジェクトとしてロードしますか？\n"
 
@@ -8401,6 +8440,18 @@ msgstr ""
 msgid "Sync now"
 msgstr "今すぐ同期"
 
+msgid "Texture import failed. The model appears to contain texture data, but the texture import process could not be completed. The model will be imported as geometry only."
+msgstr ""
+
+msgid "Applying texture colors..."
+msgstr ""
+
+msgid "Updating 3D view..."
+msgstr ""
+
+msgid "Texture colors applied."
+msgstr ""
+
 msgid "You can keep the modified presets for the new project or discard them"
 msgstr "変更したプリセットをプロジェクト内に保存するか、破棄もできます"
 
@@ -9699,6 +9750,9 @@ msgstr "スパイラル"
 msgid "First layer filament sequence"
 msgstr "初期レイヤーフィラメント順序"
 
+msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect."
+msgstr ""
+
 msgid "By Layer"
 msgstr "レイヤー別"
 
@@ -9745,18 +9799,58 @@ msgstr "ウェブページに移動"
 msgid "Material"
 msgstr ""
 
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+msgid "needs"
+msgstr ""
+
+msgid "not enabled"
+msgstr ""
+
+msgid "material not published"
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
 msgid "Publish 3MF..."
 msgstr ""
 
 msgid "Select which settings to embed in the 3MF file"
 msgstr ""
 
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
 msgid "Full Publish"
 msgstr ""
 
 msgid "Embed the entire filament of this slot in the 3MF file"
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
 msgid "Filter non-selected"
 msgstr ""
 
@@ -12381,6 +12475,9 @@ msgstr "それでも印刷する場合は、環境設定 / 制御 / スライス
 msgid "No extrusions under current settings."
 msgstr "現在の設定では造形しません"
 
+msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed."
+msgstr ""
+
 msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled."
 msgstr "オブジェクト順で造形するでは、この機能を使用できません。"
 
@@ -12417,6 +12514,9 @@ msgstr "モデルのサイズを小さくするか、現在のプリント設定
 msgid "Variable layer height is not supported with Organic supports."
 msgstr "可変レイヤー高さはオーガニックサポートではサポートされていません。"
 
+msgid "The wipe tower filament cannot be a mixed filament."
+msgstr ""
+
 # AI Translated
 msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution."
 msgstr "ノズル径やフィラメント径が異なる場合、プライムタワーを有効にすると正しく動作しないことがあります。非常に実験的な機能ですので、慎重にお進みください。"
@@ -14556,6 +14656,48 @@ msgstr "サポート材料"
 msgid "Support material is commonly used to print supports and support interfaces."
 msgstr "サポート素材は、サポート又はサポート接触面の造形によく使われます。"
 
+msgid "Is mixed filament"
+msgstr ""
+
+msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments"
+msgstr ""
+
+msgid "Mixed filament components"
+msgstr ""
+
+msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\""
+msgstr ""
+
+msgid "Mixed filament sublayer ratios"
+msgstr ""
+
+msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\""
+msgstr ""
+
+msgid "Mixed filament gradient"
+msgstr ""
+
+msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers."
+msgstr ""
+
+msgid "Mixed filament gradient range"
+msgstr ""
+
+msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%."
+msgstr ""
+
+msgid "Mixed filament gradient curve"
+msgstr ""
+
+msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead."
+msgstr ""
+
+msgid "Mixed filament per-part gradient"
+msgstr ""
+
+msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range."
+msgstr ""
+
 msgid "Filament printable"
 msgstr "フィラメント印刷可能"
 
@@ -17671,6 +17813,12 @@ msgstr ""
 "\n"
 "下の「ワイプ前のリトラクション量」設定に値を設定すると、超過分のリトラクションはワイプの前に行われます。それ以外の場合はワイプの後に行われます。"
 
+msgid "Mixed color sublayer"
+msgstr ""
+
+msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects."
+msgstr ""
+
 # AI Translated
 msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects."
 msgstr "ワイプタワーは、ノズルに残った樹脂を除去し、ノズル内のチャンバー圧力を安定させることで、オブジェクト印刷時の外観不良を防ぐために使用できます。"
@@ -18842,6 +18990,9 @@ msgstr "モデルファイルのメッシュ処理に失敗したか、有効な
 msgid "The supplied file couldn't be read because it's empty."
 msgstr "提供されたファイルは空であるため読み込めませんでした。"
 
+msgid "The file format is incompatible and cannot be parsed."
+msgstr ""
+
 msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension."
 msgstr "ファイル形式が不明です。入力ファイルの拡張子は .stl、.obj、.amf（.xml）である必要があります。"