Update translations. Update warning messages to be more user friendly. Update gradient color chips in publish dialog

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-08-21 14:25+0800\n"
+"POT-Creation-Date: 2026-08-28 12:15+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -2896,6 +2896,9 @@ msgstr "Éditer"
 msgid "Merge with"
 msgstr "Fusionner avec"
 
+msgid "Decompose Color"
+msgstr ""
+
 msgid "Delete this filament"
 msgstr "Supprimer ce filament"
 
@@ -3178,6 +3181,9 @@ msgstr "Assemblé"
 msgid "Merge parts to an object"
 msgstr "Fusionner les pièces en un objet"
 
+msgid "Using variable layer height together with mixed color sublayer may result in poor color mixing quality."
+msgstr ""
+
 msgid "Add layers"
 msgstr "Ajouter des couches"
 
@@ -7739,6 +7745,9 @@ msgstr "Personnaliser le plateau actuel"
 msgid "The %s nozzle can not print %s."
 msgstr "La buse %s ne peut pas imprimer %s."
 
+msgid "Printing mixed-color filament on a single-extruder printer requires frequent filament changes and flushing, which may significantly increase waste and the risk of nozzle / waste-chute clogging."
+msgstr ""
+
 #, boost-format
 msgid "Mixing %1% with %2% in printing is not recommended.\n"
 msgstr "Le mélange de %1% avec %2% lors de l'impression n'est pas recommandé.\n"
@@ -7864,12 +7873,36 @@ msgstr "Synchroniser la liste des filaments depuis l'AMS"
 msgid "Set filaments to use"
 msgstr "Définir les filaments à utiliser"
 
+msgid "Add Mixed Filament"
+msgstr ""
+
+msgid "Mixed Filament"
+msgstr ""
+
+msgid "Remove last mixed filament"
+msgstr ""
+
+msgid "Add mixed filament"
+msgstr ""
+
+msgid "Mixed filament has invalid or mismatched components. Please re-edit affected entries."
+msgstr ""
+
 msgid "Search plate, object and part."
 msgstr "Recherche de plaque, d'objet et de pièce."
 
 msgid "Pellets"
 msgstr "Granulés"
 
+msgid "Mixed filament has broken component references"
+msgstr ""
+
+msgid "Edit / Delete / Merge"
+msgstr ""
+
+msgid "The target mixed filament uses this physical filament as a component. Merging will remove this physical filament and may invalidate the mixed filament. Continue?"
+msgstr ""
+
 #, c-format, boost-format
 msgid "After completing your operation, %s project will be closed and create a new project."
 msgstr "Une fois votre opération terminée, le projet %s sera fermé et un nouveau projet sera créé."
@@ -8054,6 +8087,12 @@ msgstr ""
 msgid "Multi-part object detected"
 msgstr "Objet en plusieurs pièces détecté"
 
+msgid "Matching textures to filaments"
+msgstr ""
+
+msgid "Texture Import Warning"
+msgstr ""
+
 msgid "Load these files as a single object with multiple parts?\n"
 msgstr "Charger ces fichiers en tant qu'objet unique avec plusieurs parties ?\n"
 
@@ -8258,6 +8297,18 @@ msgstr ""
 msgid "Sync now"
 msgstr "Synchroniser maintenant"
 
+msgid "Texture import failed. The model appears to contain texture data, but the texture import process could not be completed. The model will be imported as geometry only."
+msgstr ""
+
+msgid "Applying texture colors..."
+msgstr ""
+
+msgid "Updating 3D view..."
+msgstr ""
+
+msgid "Texture colors applied."
+msgstr ""
+
 msgid "You can keep the modified presets for the new project or discard them"
 msgstr "Vous pouvez conserver les préréglages modifiés dans le nouveau projet ou les supprimer"
 
@@ -9500,6 +9551,9 @@ msgstr "Vase spirale"
 msgid "First layer filament sequence"
 msgstr "Séquence d’impression de la première couche"
 
+msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect."
+msgstr ""
+
 msgid "By Layer"
 msgstr "Par Couche"
 
@@ -9545,18 +9599,58 @@ msgstr "Ouvrir la page internet"
 msgid "Material"
 msgstr ""
 
+msgid "Mixed filament"
+msgstr ""
+
+msgid "Some mixed filaments rely on filaments that will not be published:"
+msgstr ""
+
+#, c-format, boost-format
+msgid "Filament %d (mixed)"
+msgstr ""
+
+msgid "needs"
+msgstr ""
+
+msgid "not enabled"
+msgstr ""
+
+msgid "material not published"
+msgstr ""
+
+msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement."
+msgstr ""
+
+msgid "Publish anyway"
+msgstr ""
+
 msgid "Publish 3MF..."
 msgstr ""
 
 msgid "Select which settings to embed in the 3MF file"
 msgstr ""
 
+msgid "Mixed filament - published as a whole when \"Enable\" above is selected"
+msgstr ""
+
+msgid "Publish this mixed filament and enable + Full Publish its component filaments"
+msgstr ""
+
+msgid "Publish this filament slot in the 3MF file"
+msgstr ""
+
 msgid "Full Publish"
 msgstr ""
 
 msgid "Embed the entire filament of this slot in the 3MF file"
 msgstr ""
 
+msgid "Material Ratio"
+msgstr ""
+
+msgid "Model Height"
+msgstr ""
+
 msgid "Filter non-selected"
 msgstr ""
 
@@ -12130,6 +12224,9 @@ msgstr "Si vous souhaitez tout de même imprimer, vous pouvez activer l’option
 msgid "No extrusions under current settings."
 msgstr "Aucune extrusion dans les paramètres actuels."
 
+msgid "A gradient mixed filament is used, but 'Mixed color sublayer' is disabled. The gradient will not be printed."
+msgstr ""
+
 msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled."
 msgstr "Le mode fluide du timelapse n'est pas pris en charge lorsque le mode d'impression « par objet » est activé."
 
@@ -12166,6 +12263,9 @@ msgstr "Vous devez réduire la taille de votre modèle ou modifier les paramètr
 msgid "Variable layer height is not supported with Organic supports."
 msgstr "La hauteur de couche variable n’est pas prise en charge avec les supports organiques."
 
+msgid "The wipe tower filament cannot be a mixed filament."
+msgstr ""
+
 msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution."
 msgstr "Différents diamètres de buses et de filaments peuvent ne pas fonctionner correctement lorsque la tour d’amorçage est activée. Il s’agit d’un projet très expérimental, il convient donc de procéder avec prudence."
 
@@ -14175,6 +14275,48 @@ msgstr "Supports"
 msgid "Support material is commonly used to print supports and support interfaces."
 msgstr "Le matériau de support est généralement utilisé pour imprimer le support et les interfaces de support"
 
+msgid "Is mixed filament"
+msgstr ""
+
+msgid "Whether this filament slot is a mixed filament composed of multiple physical filaments"
+msgstr ""
+
+msgid "Mixed filament components"
+msgstr ""
+
+msgid "Comma-separated 1-based indices of component filaments, e.g. \"1,3\""
+msgstr ""
+
+msgid "Mixed filament sublayer ratios"
+msgstr ""
+
+msgid "Comma-separated ratio values summing to 1.0, e.g. \"0.7,0.3\""
+msgstr ""
+
+msgid "Mixed filament gradient"
+msgstr ""
+
+msgid "Enable Z-direction gradient mode for mixed filament sub-layers. When enabled, the sub-layer ratios vary linearly across layers."
+msgstr ""
+
+msgid "Mixed filament gradient range"
+msgstr ""
+
+msgid "Start and end ratios for the first component in gradient mode. Comma-separated pair, e.g. \"0.10,0.90\" means 10% to 90%."
+msgstr ""
+
+msgid "Mixed filament gradient curve"
+msgstr ""
+
+msgid "Optional Photoshop-style custom curve mapping Z progress to the first component ratio. Encoded as pipe-separated control points, either \"x,y\" (legacy) or \"x,y,m_in,m_out\" when a tangent override is needed (empty token or \"nan\" means use PCHIP default). x in [0,1]; y is clamped to the configured ratio range, e.g. \"0,0.15|0.5,0.50|1,0.85\". When empty, the linear gradient_range is used instead."
+msgstr ""
+
+msgid "Mixed filament per-part gradient"
+msgstr ""
+
+msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range."
+msgstr ""
+
 msgid "Filament printable"
 msgstr "Filament imprimable"
 
@@ -17003,6 +17145,12 @@ msgstr ""
 "\n"
 "Le réglage d’une valeur dans le paramètre de quantité de rétraction avant essuyage ci-dessous permet d’effectuer toute rétraction excédentaire avant l’essuyage, sinon elle sera effectuée après l’essuyage."
 
+msgid "Mixed color sublayer"
+msgstr ""
+
+msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects."
+msgstr ""
+
 msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects."
 msgstr "La tour de purge peut être utilisée pour nettoyer les résidus sur la buse et stabiliser la pression du caisson à l'intérieur de la buse afin d'éviter les défauts d'apparence lors de l'impression d'objets."
 
@@ -18069,6 +18217,9 @@ msgstr "Le maillage d'un fichier modèle a échoué ou la forme n'est pas valide
 msgid "The supplied file couldn't be read because it's empty."
 msgstr "Le fichier fourni n'a pas pu être lu car il est vide"
 
+msgid "The file format is incompatible and cannot be parsed."
+msgstr ""
+
 msgid "Unknown file format: input file must have .stl, .obj, or .amf(.xml) extension."
 msgstr "Format de fichier inconnu : le fichier d'entrée doit porter l'extension .stl, .obj ou .amf (.xml)."