Add new machines

resources/profiles/Volumic/machine/SH65 Performance (0.4 nozzle).json

@@ -0,0 +1,53 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "SH65 Performance (0.4 nozzle)",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_volumic_common",
+	"printer_model": "SH65 Performance",
+	"default_print_profile": "Performance 150 - 0.15mm",
+	"host_type": "octo/klipper",
+	"print_host": "192.168.0.60",
+	"nozzle_diameter": ["0.4"],
+	"printable_area": ["0x0","650x0","650x300","0x300"],
+	"printable_height": "300",
+	"nozzle_type": "undefine",
+	"auxiliary_fan": "0",
+	"gcode_flavor": "klipper",
+	"max_layer_height": ["0.3"],
+	"min_layer_height": ["0.025"],
+	"printer_variant": "0.4",
+	"retraction_minimum_travel": ["1"],
+	"retraction_length": ["2.4"],
+	"retraction_speed": ["30"],
+	"deretraction_speed": ["30"],
+
+	"machine_max_acceleration_e": ["0"],
+	"machine_max_acceleration_extruding": ["0"],
+	"machine_max_acceleration_retracting": ["0"],
+	"machine_max_acceleration_x": ["0"],
+	"machine_max_acceleration_y": ["0"],
+	"machine_max_acceleration_z": ["0"],
+	"machine_max_speed_e": ["0"],
+	"machine_max_speed_x": ["0"],
+	"machine_max_speed_y": ["0"],
+	"machine_max_speed_z": ["0"],
+	"machine_max_jerk_e": ["0"],
+	"machine_max_jerk_x": ["0"],
+	"machine_max_jerk_y": ["0"],
+	"machine_max_jerk_z": ["0"],
+	"default_acceleration": ["0"],
+	"outer_wall_acceleration": ["0"],
+	"inner_wall_acceleration": ["0"],
+	"bridge_acceleration": ["0"],
+	"sparse_infill_acceleration": ["0"],
+	"internal_solid_infill_acceleration": ["0"],
+	"initial_layer_acceleration": ["0"],
+	"top_surface_acceleration": ["0"],
+	"travel_acceleration": ["0"],
+
+	"machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]",
+	"before_layer_change_gcode": "G92 E0",
+	"machine_end_gcode": "END_PRINT"
+}