mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-01 12:51:12 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -3,7 +3,10 @@
|
|||||||
"display_name": "Bambu Lab X1 Carbon",
|
"display_name": "Bambu Lab X1 Carbon",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p", "1080p" ],
|
"resolution_supported": [
|
||||||
|
"720p",
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -13,7 +16,10 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||||
@@ -50,15 +56,25 @@
|
|||||||
"support_ams_ext_mix_print": true
|
"support_ams_ext_mix_print": true
|
||||||
},
|
},
|
||||||
"model_id": "BL-P001",
|
"model_id": "BL-P001",
|
||||||
"compatible_machine": [ "BL-P002", "C11", "C12", "C13" ],
|
"compatible_machine": [
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"BL-P002",
|
||||||
|
"C11",
|
||||||
|
"C12",
|
||||||
|
"C13"
|
||||||
|
],
|
||||||
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||||
"printer_type": "3DPrinter-X1-Carbon",
|
"printer_type": "3DPrinter-X1-Carbon",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_x1c",
|
"printer_thumbnail_image": "printer_thumbnail_x1c",
|
||||||
"printer_connect_help_image": "input_access_code_x1",
|
"printer_connect_help_image": "input_access_code_x1",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_xp"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_xp"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_x1",
|
"printer_series": "series_x1",
|
||||||
|
|||||||
@@ -3,7 +3,10 @@
|
|||||||
"display_name": "Bambu Lab X1",
|
"display_name": "Bambu Lab X1",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p", "1080p" ],
|
"resolution_supported": [
|
||||||
|
"720p",
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -13,7 +16,10 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||||
@@ -51,14 +57,24 @@
|
|||||||
},
|
},
|
||||||
"model_id": "BL-P002",
|
"model_id": "BL-P002",
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||||
"compatible_machine": [ "BL-P001", "C11", "C12", "C13" ],
|
"compatible_machine": [
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"BL-P001",
|
||||||
|
"C11",
|
||||||
|
"C12",
|
||||||
|
"C13"
|
||||||
|
],
|
||||||
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"printer_type": "3DPrinter-X1",
|
"printer_type": "3DPrinter-X1",
|
||||||
"printer_thumbnail_image": "printer_thumbnail",
|
"printer_thumbnail_image": "printer_thumbnail",
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"printer_connect_help_image": "input_access_code_x1",
|
"printer_connect_help_image": "input_access_code_x1",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_xp"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_xp"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_x1",
|
"printer_series": "series_x1",
|
||||||
|
|||||||
@@ -3,12 +3,17 @@
|
|||||||
"display_name": "Bambu Lab P1P",
|
"display_name": "Bambu Lab P1P",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p" ],
|
"resolution_supported": [
|
||||||
|
"720p"
|
||||||
|
],
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"local": "local"
|
"local": "local"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
||||||
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
||||||
@@ -47,14 +52,24 @@
|
|||||||
"model_id": "C11",
|
"model_id": "C11",
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||||
"compatible_machine": [ "BL-P001", "BL-P002", "C12", "C13" ],
|
"compatible_machine": [
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"BL-P001",
|
||||||
|
"BL-P002",
|
||||||
|
"C12",
|
||||||
|
"C13"
|
||||||
|
],
|
||||||
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"printer_type": "C11",
|
"printer_type": "C11",
|
||||||
"ftp_folder": "sdcard/",
|
"ftp_folder": "sdcard/",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_p1p",
|
"printer_thumbnail_image": "printer_thumbnail_p1p",
|
||||||
"printer_connect_help_image": "input_access_code_p1p",
|
"printer_connect_help_image": "input_access_code_p1p",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_xp"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_xp"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_p1p",
|
"printer_series": "series_p1p",
|
||||||
|
|||||||
@@ -3,12 +3,17 @@
|
|||||||
"display_name": "Bambu Lab P1S",
|
"display_name": "Bambu Lab P1S",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p" ],
|
"resolution_supported": [
|
||||||
|
"720p"
|
||||||
|
],
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"local": "local"
|
"local": "local"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
"zh": "https://wiki.bambulab.com/zh/p1/maintenance/complete-hot-end-assembly",
|
||||||
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
"en": "https://wiki.bambulab.com/en/p1/maintenance/complete-hot-end-assembly"
|
||||||
@@ -47,14 +52,24 @@
|
|||||||
"model_id": "C12",
|
"model_id": "C12",
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||||
"compatible_machine": [ "BL-P001", "BL-P002", "C11", "C13" ],
|
"compatible_machine": [
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"BL-P001",
|
||||||
|
"BL-P002",
|
||||||
|
"C11",
|
||||||
|
"C13"
|
||||||
|
],
|
||||||
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"printer_type": "C12",
|
"printer_type": "C12",
|
||||||
"ftp_folder": "sdcard/",
|
"ftp_folder": "sdcard/",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_p1s",
|
"printer_thumbnail_image": "printer_thumbnail_p1s",
|
||||||
"printer_connect_help_image": "input_access_code_p1p",
|
"printer_connect_help_image": "input_access_code_p1p",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_xp"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_xp"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_p1p",
|
"printer_series": "series_p1p",
|
||||||
@@ -69,7 +84,9 @@
|
|||||||
},
|
},
|
||||||
"01.03.50.01": {
|
"01.03.50.01": {
|
||||||
"engineer": "00.06.03.51",
|
"engineer": "00.06.03.51",
|
||||||
"resolution_supported": ["720p"],
|
"resolution_supported": [
|
||||||
|
"720p"
|
||||||
|
],
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"liveview": {
|
"liveview": {
|
||||||
|
|||||||
@@ -3,7 +3,10 @@
|
|||||||
"display_name": "Bambu Lab X1E",
|
"display_name": "Bambu Lab X1E",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p", "1080p" ],
|
"resolution_supported": [
|
||||||
|
"720p",
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -13,7 +16,10 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 320 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
320
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/x1/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/x1/maintenance/replace-hotend"
|
||||||
@@ -46,7 +52,10 @@
|
|||||||
"support_first_layer_inspect": true,
|
"support_first_layer_inspect": true,
|
||||||
"support_chamber": true,
|
"support_chamber": true,
|
||||||
"support_chamber_temp_edit": true,
|
"support_chamber_temp_edit": true,
|
||||||
"support_chamber_temp_edit_range": [0, 60],
|
"support_chamber_temp_edit_range": [
|
||||||
|
0,
|
||||||
|
60
|
||||||
|
],
|
||||||
"support_extrusion_cali": false,
|
"support_extrusion_cali": false,
|
||||||
"support_user_preset": false,
|
"support_user_preset": false,
|
||||||
"bed_temperature_limit": 110,
|
"bed_temperature_limit": 110,
|
||||||
@@ -56,13 +65,23 @@
|
|||||||
"model_id": "C13",
|
"model_id": "C13",
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto",
|
||||||
"compatible_machine": [ "BL-P001", "BL-P002", "C11", "C12" ],
|
"compatible_machine": [
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"BL-P001",
|
||||||
|
"BL-P002",
|
||||||
|
"C11",
|
||||||
|
"C12"
|
||||||
|
],
|
||||||
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"printer_type": "C13",
|
"printer_type": "C13",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_x1e",
|
"printer_thumbnail_image": "printer_thumbnail_x1e",
|
||||||
"printer_connect_help_image": "input_access_code_x1",
|
"printer_connect_help_image": "input_access_code_x1",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_xp"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_xp"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_x1",
|
"printer_series": "series_x1",
|
||||||
|
|||||||
@@ -3,13 +3,18 @@
|
|||||||
"display_name": "Bambu Lab A1 mini",
|
"display_name": "Bambu Lab A1 mini",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p" ],
|
"resolution_supported": [
|
||||||
|
"720p"
|
||||||
|
],
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"local": "local",
|
"local": "local",
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
||||||
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
||||||
@@ -48,13 +53,18 @@
|
|||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
||||||
"compatible_machine": [],
|
"compatible_machine": [],
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"printer_type": "N1",
|
"printer_type": "N1",
|
||||||
"ftp_folder": "sdcard/",
|
"ftp_folder": "sdcard/",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_n1",
|
"printer_thumbnail_image": "printer_thumbnail_n1",
|
||||||
"printer_connect_help_image": "input_access_code_n1",
|
"printer_connect_help_image": "input_access_code_n1",
|
||||||
"printer_use_ams_image": "extra_icon",
|
"printer_use_ams_image": "extra_icon",
|
||||||
"printer_ext_image": ["ext_image_n1"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_n1"
|
||||||
|
],
|
||||||
"use_ams_type": "f1",
|
"use_ams_type": "f1",
|
||||||
"printer_arch": "i3",
|
"printer_arch": "i3",
|
||||||
"printer_series": "series_n",
|
"printer_series": "series_n",
|
||||||
|
|||||||
@@ -3,13 +3,18 @@
|
|||||||
"display_name": "Bambu Lab A1",
|
"display_name": "Bambu Lab A1",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "720p" ],
|
"resolution_supported": [
|
||||||
|
"720p"
|
||||||
|
],
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"local": "local",
|
"local": "local",
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
"zh": "https://wiki.bambulab.com/zh/a1-mini/maintenance/hotend-heating-assembly-replacement",
|
||||||
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
"en": "https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly-replacement"
|
||||||
@@ -46,7 +51,10 @@
|
|||||||
},
|
},
|
||||||
"model_id": "N2S",
|
"model_id": "N2S",
|
||||||
"compatible_machine": [],
|
"compatible_machine": [],
|
||||||
"auto_cali_not_support_filaments": [ "GFU03", "GFU04" ],
|
"auto_cali_not_support_filaments": [
|
||||||
|
"GFU03",
|
||||||
|
"GFU04"
|
||||||
|
],
|
||||||
"support_wrapping_detection": false,
|
"support_wrapping_detection": false,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_i3",
|
||||||
"printer_type": "N2S",
|
"printer_type": "N2S",
|
||||||
@@ -54,7 +62,9 @@
|
|||||||
"printer_thumbnail_image": "printer_thumbnail_n2s",
|
"printer_thumbnail_image": "printer_thumbnail_n2s",
|
||||||
"printer_connect_help_image": "input_access_code_n1",
|
"printer_connect_help_image": "input_access_code_n1",
|
||||||
"printer_use_ams_image": "extra_icon",
|
"printer_use_ams_image": "extra_icon",
|
||||||
"printer_ext_image": ["ext_image_n2s"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_n2s"
|
||||||
|
],
|
||||||
"use_ams_type": "f1",
|
"use_ams_type": "f1",
|
||||||
"printer_arch": "i3",
|
"printer_arch": "i3",
|
||||||
"printer_series": "series_n",
|
"printer_series": "series_n",
|
||||||
|
|||||||
@@ -3,7 +3,9 @@
|
|||||||
"display_name": "Bambu Lab P2S",
|
"display_name": "Bambu Lab P2S",
|
||||||
"print": {
|
"print": {
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "1080p" ],
|
"resolution_supported": [
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -14,12 +16,18 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 300 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
300
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||||
},
|
},
|
||||||
"bed_temp_range": [ 0, 110 ],
|
"bed_temp_range": [
|
||||||
|
0,
|
||||||
|
110
|
||||||
|
],
|
||||||
"support_motor_noise_cali": false,
|
"support_motor_noise_cali": false,
|
||||||
"support_tunnel_mqtt": true,
|
"support_tunnel_mqtt": true,
|
||||||
"support_mqtt_alive": true,
|
"support_mqtt_alive": true,
|
||||||
@@ -57,21 +65,21 @@
|
|||||||
"support_ams_ext_mix_print": true
|
"support_ams_ext_mix_print": true
|
||||||
},
|
},
|
||||||
"fan": {
|
"fan": {
|
||||||
"0" :
|
"0": {
|
||||||
{
|
|
||||||
"description": "",
|
"description": "",
|
||||||
"2": "Right(Aux)",
|
"2": "Right(Aux)",
|
||||||
"10": "Left(Aux)"
|
"10": "Left(Aux)"
|
||||||
},
|
},
|
||||||
"1" :
|
"1": {
|
||||||
{
|
|
||||||
"2": "Right(Filter)",
|
"2": "Right(Filter)",
|
||||||
"10": "Left(Aux)"
|
"10": "Left(Aux)"
|
||||||
},
|
},
|
||||||
"special_cooling_text": "Cooling mode is suitable for printing PLA/PETG/TPU materials."
|
"special_cooling_text": "Cooling mode is suitable for printing PLA/PETG/TPU materials."
|
||||||
},
|
},
|
||||||
"model_id": "N7",
|
"model_id": "N7",
|
||||||
"subseries": ["N7-V2"],
|
"subseries": [
|
||||||
|
"N7-V2"
|
||||||
|
],
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_n7",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_n7",
|
||||||
"support_wrapping_detection": true,
|
"support_wrapping_detection": true,
|
||||||
"compatible_machine": [],
|
"compatible_machine": [],
|
||||||
@@ -79,7 +87,9 @@
|
|||||||
"printer_thumbnail_image": "printer_thumbnail_N7",
|
"printer_thumbnail_image": "printer_thumbnail_N7",
|
||||||
"printer_connect_help_image": "input_access_code_x1",
|
"printer_connect_help_image": "input_access_code_x1",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_n7"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_n7"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_x1",
|
"printer_series": "series_x1",
|
||||||
|
|||||||
@@ -4,11 +4,16 @@
|
|||||||
"print": {
|
"print": {
|
||||||
"2D": {
|
"2D": {
|
||||||
"laser": {
|
"laser": {
|
||||||
"power": [ 10, 40 ]
|
"power": [
|
||||||
|
10,
|
||||||
|
40
|
||||||
|
]
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "1080p" ],
|
"resolution_supported": [
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -19,12 +24,18 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 350 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
350
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||||
},
|
},
|
||||||
"bed_temp_range": [ 0, 120 ],
|
"bed_temp_range": [
|
||||||
|
0,
|
||||||
|
120
|
||||||
|
],
|
||||||
"support_motor_noise_cali": false,
|
"support_motor_noise_cali": false,
|
||||||
"support_tunnel_mqtt": true,
|
"support_tunnel_mqtt": true,
|
||||||
"support_mqtt_alive": true,
|
"support_mqtt_alive": true,
|
||||||
@@ -56,7 +67,10 @@
|
|||||||
"support_save_remote_print_file_to_storage": true,
|
"support_save_remote_print_file_to_storage": true,
|
||||||
"support_chamber": true,
|
"support_chamber": true,
|
||||||
"support_chamber_temp_edit": true,
|
"support_chamber_temp_edit": true,
|
||||||
"support_chamber_temp_edit_range": [ 0, 65 ],
|
"support_chamber_temp_edit_range": [
|
||||||
|
0,
|
||||||
|
65
|
||||||
|
],
|
||||||
"support_chamber_temp_switch_heating": 40,
|
"support_chamber_temp_switch_heating": 40,
|
||||||
"support_extrusion_cali": false,
|
"support_extrusion_cali": false,
|
||||||
"support_user_preset": false,
|
"support_user_preset": false,
|
||||||
@@ -66,13 +80,22 @@
|
|||||||
"model_id": "O1D",
|
"model_id": "O1D",
|
||||||
"support_wrapping_detection": true,
|
"support_wrapping_detection": true,
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
||||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
"printer_modes": [
|
||||||
"compatible_machine": ["O1E"],
|
"fdm",
|
||||||
|
"laser",
|
||||||
|
"cut"
|
||||||
|
],
|
||||||
|
"compatible_machine": [
|
||||||
|
"O1E"
|
||||||
|
],
|
||||||
"printer_type": "O1D",
|
"printer_type": "O1D",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_h2d",
|
"printer_thumbnail_image": "printer_thumbnail_h2d",
|
||||||
"printer_connect_help_image": "input_access_code_h2d",
|
"printer_connect_help_image": "input_access_code_h2d",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_o_right", "ext_image_o_left"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_o_right",
|
||||||
|
"ext_image_o_left"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_o",
|
"printer_series": "series_o",
|
||||||
|
|||||||
@@ -4,11 +4,16 @@
|
|||||||
"print": {
|
"print": {
|
||||||
"2D": {
|
"2D": {
|
||||||
"laser": {
|
"laser": {
|
||||||
"power": [ 10, 40 ]
|
"power": [
|
||||||
|
10,
|
||||||
|
40
|
||||||
|
]
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "1080p" ],
|
"resolution_supported": [
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -19,12 +24,18 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 350 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
350
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
|
||||||
},
|
},
|
||||||
"bed_temp_range": [ 0, 120 ],
|
"bed_temp_range": [
|
||||||
|
0,
|
||||||
|
120
|
||||||
|
],
|
||||||
"support_motor_noise_cali": false,
|
"support_motor_noise_cali": false,
|
||||||
"support_tunnel_mqtt": true,
|
"support_tunnel_mqtt": true,
|
||||||
"support_mqtt_alive": true,
|
"support_mqtt_alive": true,
|
||||||
@@ -56,7 +67,10 @@
|
|||||||
"support_save_remote_print_file_to_storage": true,
|
"support_save_remote_print_file_to_storage": true,
|
||||||
"support_chamber": true,
|
"support_chamber": true,
|
||||||
"support_chamber_temp_edit": true,
|
"support_chamber_temp_edit": true,
|
||||||
"support_chamber_temp_edit_range": [ 0, 65 ],
|
"support_chamber_temp_edit_range": [
|
||||||
|
0,
|
||||||
|
65
|
||||||
|
],
|
||||||
"support_chamber_temp_switch_heating": 40,
|
"support_chamber_temp_switch_heating": 40,
|
||||||
"support_extrusion_cali": false,
|
"support_extrusion_cali": false,
|
||||||
"support_user_preset": false,
|
"support_user_preset": false,
|
||||||
@@ -66,13 +80,22 @@
|
|||||||
"model_id": "O1E",
|
"model_id": "O1E",
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_multi_extruders",
|
||||||
"support_wrapping_detection": true,
|
"support_wrapping_detection": true,
|
||||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
"printer_modes": [
|
||||||
"compatible_machine": ["O1D"],
|
"fdm",
|
||||||
|
"laser",
|
||||||
|
"cut"
|
||||||
|
],
|
||||||
|
"compatible_machine": [
|
||||||
|
"O1D"
|
||||||
|
],
|
||||||
"printer_type": "O1E",
|
"printer_type": "O1E",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_o1e",
|
"printer_thumbnail_image": "printer_thumbnail_o1e",
|
||||||
"printer_connect_help_image": "input_access_code_h2d",
|
"printer_connect_help_image": "input_access_code_h2d",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_o_right", "ext_image_o_left"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_o_right",
|
||||||
|
"ext_image_o_left"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_o",
|
"printer_series": "series_o",
|
||||||
|
|||||||
@@ -4,11 +4,16 @@
|
|||||||
"print": {
|
"print": {
|
||||||
"2D": {
|
"2D": {
|
||||||
"laser": {
|
"laser": {
|
||||||
"power": [ 10, 40 ]
|
"power": [
|
||||||
|
10,
|
||||||
|
40
|
||||||
|
]
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"ipcam": {
|
"ipcam": {
|
||||||
"resolution_supported": [ "1080p" ],
|
"resolution_supported": [
|
||||||
|
"1080p"
|
||||||
|
],
|
||||||
"virtual_camera": "enabled",
|
"virtual_camera": "enabled",
|
||||||
"liveview": {
|
"liveview": {
|
||||||
"remote": "tutk"
|
"remote": "tutk"
|
||||||
@@ -19,12 +24,18 @@
|
|||||||
"model_download": "enabled"
|
"model_download": "enabled"
|
||||||
}
|
}
|
||||||
},
|
},
|
||||||
"nozzle_temp_range": [ 0, 350 ],
|
"nozzle_temp_range": [
|
||||||
|
0,
|
||||||
|
350
|
||||||
|
],
|
||||||
"nozzle_replace_wiki": {
|
"nozzle_replace_wiki": {
|
||||||
"zh": "https://wiki.bambulab.com/zh/h2s/maintenance/replace-silicone-sock-and-hotend",
|
"zh": "https://wiki.bambulab.com/zh/h2s/maintenance/replace-silicone-sock-and-hotend",
|
||||||
"en": "https://wiki.bambulab.com/en/h2s/maintenance/replace-silicone-sock-and-hotend"
|
"en": "https://wiki.bambulab.com/en/h2s/maintenance/replace-silicone-sock-and-hotend"
|
||||||
},
|
},
|
||||||
"bed_temp_range": [ 0, 120 ],
|
"bed_temp_range": [
|
||||||
|
0,
|
||||||
|
120
|
||||||
|
],
|
||||||
"support_motor_noise_cali": false,
|
"support_motor_noise_cali": false,
|
||||||
"support_tunnel_mqtt": true,
|
"support_tunnel_mqtt": true,
|
||||||
"support_mqtt_alive": true,
|
"support_mqtt_alive": true,
|
||||||
@@ -55,7 +66,10 @@
|
|||||||
"support_first_layer_inspect": false,
|
"support_first_layer_inspect": false,
|
||||||
"support_save_remote_print_file_to_storage": true,
|
"support_save_remote_print_file_to_storage": true,
|
||||||
"support_chamber_temp_edit": true,
|
"support_chamber_temp_edit": true,
|
||||||
"support_chamber_temp_edit_range": [0, 65],
|
"support_chamber_temp_edit_range": [
|
||||||
|
0,
|
||||||
|
65
|
||||||
|
],
|
||||||
"support_chamber_temp_switch_heating": 40,
|
"support_chamber_temp_switch_heating": 40,
|
||||||
"support_extrusion_cali": false,
|
"support_extrusion_cali": false,
|
||||||
"support_user_preset": false,
|
"support_user_preset": false,
|
||||||
@@ -63,13 +77,19 @@
|
|||||||
},
|
},
|
||||||
"model_id": "O1S",
|
"model_id": "O1S",
|
||||||
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_single_o",
|
"auto_pa_cali_thumbnail_image": "fd_calibration_auto_single_o",
|
||||||
"printer_modes": [ "fdm", "laser", "cut" ],
|
"printer_modes": [
|
||||||
|
"fdm",
|
||||||
|
"laser",
|
||||||
|
"cut"
|
||||||
|
],
|
||||||
"compatible_machine": [],
|
"compatible_machine": [],
|
||||||
"printer_type": "O1S",
|
"printer_type": "O1S",
|
||||||
"printer_thumbnail_image": "printer_thumbnail_o1s",
|
"printer_thumbnail_image": "printer_thumbnail_o1s",
|
||||||
"printer_connect_help_image": "input_access_code_x1",
|
"printer_connect_help_image": "input_access_code_x1",
|
||||||
"printer_use_ams_image": "ams_icon",
|
"printer_use_ams_image": "ams_icon",
|
||||||
"printer_ext_image": ["ext_image_o1s"],
|
"printer_ext_image": [
|
||||||
|
"ext_image_o1s"
|
||||||
|
],
|
||||||
"use_ams_type": "generic",
|
"use_ams_type": "generic",
|
||||||
"printer_arch": "core_xy",
|
"printer_arch": "core_xy",
|
||||||
"printer_series": "series_o",
|
"printer_series": "series_o",
|
||||||
|
|||||||
@@ -1,6 +1,5 @@
|
|||||||
{
|
{
|
||||||
"whitelist": [
|
"whitelist": [],
|
||||||
],
|
|
||||||
"blacklist": [
|
"blacklist": [
|
||||||
{
|
{
|
||||||
"type": "TPU",
|
"type": "TPU",
|
||||||
@@ -39,14 +38,18 @@
|
|||||||
},
|
},
|
||||||
{
|
{
|
||||||
"type": "PPS-CF",
|
"type": "PPS-CF",
|
||||||
"model_id":["O1S"],
|
"model_id": [
|
||||||
|
"O1S"
|
||||||
|
],
|
||||||
"action": "warning",
|
"action": "warning",
|
||||||
"description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
"description": "PPS-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||||
},
|
},
|
||||||
{
|
{
|
||||||
"type": "PPA-CF",
|
"type": "PPA-CF",
|
||||||
"model_id":["O1S"],
|
"model_id": [
|
||||||
|
"O1S"
|
||||||
|
],
|
||||||
"action": "warning",
|
"action": "warning",
|
||||||
"description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
"description": "PPA-CF is brittle and could break in bended PTFE tube above Toolhead.",
|
||||||
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
"wiki": "https://e.bambulab.com/t?c=UC64kdlpHxN3Mb15"
|
||||||
@@ -67,7 +70,10 @@
|
|||||||
"vendor": "Bambu Lab",
|
"vendor": "Bambu Lab",
|
||||||
"type": "PLA",
|
"type": "PLA",
|
||||||
"name": "PLA Glow",
|
"name": "PLA Glow",
|
||||||
"model_id":["N1","N2S"],
|
"model_id": [
|
||||||
|
"N1",
|
||||||
|
"N2S"
|
||||||
|
],
|
||||||
"action": "warning",
|
"action": "warning",
|
||||||
"slot": "ams",
|
"slot": "ams",
|
||||||
"description": "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite."
|
"description": "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite."
|
||||||
|
|||||||
@@ -5,25 +5,80 @@
|
|||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_machine_common",
|
"inherits": "fdm_machine_common",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"machine_max_acceleration_e": ["5000", "5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
"5000",
|
||||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
"5000"
|
||||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
],
|
||||||
"machine_max_acceleration_x": ["20000", "20000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_y": ["20000", "20000"],
|
"20000",
|
||||||
"machine_max_acceleration_z": ["500", "200"],
|
"20000"
|
||||||
"machine_max_speed_e": ["25", "25"],
|
],
|
||||||
"machine_max_speed_x": ["500", "200"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_y": ["500", "200"],
|
"5000",
|
||||||
"machine_max_speed_z": ["12", "12"],
|
"5000"
|
||||||
"machine_max_jerk_e": ["2.5", "2.5"],
|
],
|
||||||
"machine_max_jerk_x": ["9", "9"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_jerk_y": ["9", "9"],
|
"20000",
|
||||||
"machine_max_jerk_z": ["0.2", "0.4"],
|
"20000"
|
||||||
"machine_min_extruding_rate": ["0", "0"],
|
],
|
||||||
"machine_min_travel_rate": ["0", "0"],
|
"machine_max_acceleration_x": [
|
||||||
"max_layer_height": ["0.32"],
|
"20000",
|
||||||
"min_layer_height": ["0.08"],
|
"20000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"20000",
|
||||||
|
"20000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"25",
|
||||||
|
"25"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500",
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12",
|
||||||
|
"12"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_e": [
|
||||||
|
"2.5",
|
||||||
|
"2.5"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_x": [
|
||||||
|
"9",
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_y": [
|
||||||
|
"9",
|
||||||
|
"9"
|
||||||
|
],
|
||||||
|
"machine_max_jerk_z": [
|
||||||
|
"0.2",
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"machine_min_extruding_rate": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"machine_min_travel_rate": [
|
||||||
|
"0",
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.32"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.08"
|
||||||
|
],
|
||||||
"printable_height": "250",
|
"printable_height": "250",
|
||||||
"extruder_clearance_radius": "65",
|
"extruder_clearance_radius": "65",
|
||||||
"extruder_clearance_height_to_rod": "36",
|
"extruder_clearance_height_to_rod": "36",
|
||||||
@@ -31,24 +86,50 @@
|
|||||||
"printer_settings_id": "",
|
"printer_settings_id": "",
|
||||||
"printer_technology": "FFF",
|
"printer_technology": "FFF",
|
||||||
"printer_variant": "0.4",
|
"printer_variant": "0.4",
|
||||||
"retraction_minimum_travel": ["1"],
|
"retraction_minimum_travel": [
|
||||||
"retract_before_wipe": ["70%"],
|
"1"
|
||||||
"retract_when_changing_layer": ["1"],
|
],
|
||||||
"retraction_length": ["0.8"],
|
"retract_before_wipe": [
|
||||||
"retract_length_toolchange": ["2"],
|
"70%"
|
||||||
"z_hop": ["0.4"],
|
],
|
||||||
"retract_restart_extra": ["0"],
|
"retract_when_changing_layer": [
|
||||||
"retract_restart_extra_toolchange": ["0"],
|
"1"
|
||||||
"retraction_speed": ["30"],
|
],
|
||||||
"deretraction_speed": ["30"],
|
"retraction_length": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
|
"retract_length_toolchange": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"z_hop": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
|
"retract_restart_extra": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retract_restart_extra_toolchange": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retraction_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
|
"deretraction_speed": [
|
||||||
|
"30"
|
||||||
|
],
|
||||||
"z_hop_types": "Normal Lift",
|
"z_hop_types": "Normal Lift",
|
||||||
"silent_mode": "0",
|
"silent_mode": "0",
|
||||||
"single_extruder_multi_material": "1",
|
"single_extruder_multi_material": "1",
|
||||||
"change_filament_gcode": "",
|
"change_filament_gcode": "",
|
||||||
"wipe": ["1"],
|
"wipe": [
|
||||||
"default_filament_profile": [""],
|
"1"
|
||||||
|
],
|
||||||
|
"default_filament_profile": [
|
||||||
|
""
|
||||||
|
],
|
||||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||||
"bed_exclude_area": ["0x0"],
|
"bed_exclude_area": [
|
||||||
|
"0x0"
|
||||||
|
],
|
||||||
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||||
"machine_end_gcode": "PRINT_END",
|
"machine_end_gcode": "PRINT_END",
|
||||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||||
|
|||||||
-1
@@ -289,5 +289,4 @@
|
|||||||
"xy_contour_compensation": "0",
|
"xy_contour_compensation": "0",
|
||||||
"xy_hole_compensation": "0",
|
"xy_hole_compensation": "0",
|
||||||
"solid_infill_rotate_template": ""
|
"solid_infill_rotate_template": ""
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -28,4 +28,3 @@
|
|||||||
"Anycubic Predator 0.4 nozzle"
|
"Anycubic Predator 0.4 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@@ -114,4 +114,3 @@
|
|||||||
"layer_change_gcode": "",
|
"layer_change_gcode": "",
|
||||||
"scan_first_layer": "0"
|
"scan_first_layer": "0"
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@@ -112,4 +112,3 @@
|
|||||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||||
"scan_first_layer": "0"
|
"scan_first_layer": "0"
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@@ -23,7 +23,6 @@
|
|||||||
"bridge_no_support": "0",
|
"bridge_no_support": "0",
|
||||||
"draft_shield": "disabled",
|
"draft_shield": "disabled",
|
||||||
"elefant_foot_compensation": "0.15",
|
"elefant_foot_compensation": "0.15",
|
||||||
|
|
||||||
"outer_wall_line_width": "0.4",
|
"outer_wall_line_width": "0.4",
|
||||||
"wall_infill_order": "inner wall/outer wall/infill",
|
"wall_infill_order": "inner wall/outer wall/infill",
|
||||||
"line_width": "0.4",
|
"line_width": "0.4",
|
||||||
@@ -103,5 +102,4 @@
|
|||||||
"gap_infill_speed": "30",
|
"gap_infill_speed": "30",
|
||||||
"travel_speed": "200",
|
"travel_speed": "200",
|
||||||
"enable_arc_fitting": "0"
|
"enable_arc_fitting": "0"
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -157,5 +157,7 @@
|
|||||||
"; filament end gcode \n\n"
|
"; filament end gcode \n\n"
|
||||||
],
|
],
|
||||||
"filament_notes": "//EN\n1.Be sure to read it carefully before using (https://wiki.fusrock.com).\n2.When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.\\n3.Thank you for choosing us FusRock.\n*This setting may not be able to adapt to all models. In some cases, you need to modify and adjust the parameters by yourself to improve the printing effect.\n*FusRock 3D printing filaments are intended for general-purpose printing and have been tested under standard conditions. However, the performance and safety of printed objects are affected by multiple factors, including printing parameters, model design, usage environment, and the specific application.\n*By using FusRock materials, the user acknowledges and agrees to independently evaluate whether the printed parts are suitable for their intended use, and assumes all associated risks.\n*FusRock shall not be held liable for any damage, injury, or loss that may result from the use of printed products made with our materials, including but not limited to structural failure, functional defects, or safety hazards under actual usage conditions.Before applying printed parts in any critical, functional, or commercial context, thorough testing must be conducted. Except for the certifications explicitly stated for specific FusRock materials, our products are not certified for medical, aerospace, or life-support applications.\n//CN\n1.使用前请务必仔细阅读（https://wiki.fusrock.com）。\n2.打印该耗材时，可能会出现喷嘴堵塞、拉丝、翘边以及层间附着力不足等问题。为了获得更好的打印效果，请参考此维基页面：高温 / 工程材料打印技巧（https://wiki.fusrock.com）。\n3.感谢您选择FusRock。\n*此设置不一定能够适配所有模型，存在部分情况下需要您自行修改调整参数来提升打印效果。\n*FusRock 3D打印耗材适用于通用打印用途，已在标准条件下进行测试。然而，打印成品的性能与安全性受多种因素影响，包括打印参数、模型设计、使用环境及实际用途。\n*使用FusRock材料即表示用户已知悉并同意，自行评估打印件是否适用于其具体应用，并承担由此产生的全部风险。\n*FusRock对使用本公司耗材打印的产品在实际应用中可能导致的任何损害、伤害或损失不承担任何责任，包括但不限于结构失效、功能异常或使用环境中的安全隐患。在将打印件应用于关键、功能性或商业性场景前，请务必进行充分测试。除FusRock已标明材料所获得的各项认证资质外，FusRock产品未取得医疗、航天或生命支持系统认证资质。",
|
"filament_notes": "//EN\n1.Be sure to read it carefully before using (https://wiki.fusrock.com).\n2.When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.\\n3.Thank you for choosing us FusRock.\n*This setting may not be able to adapt to all models. In some cases, you need to modify and adjust the parameters by yourself to improve the printing effect.\n*FusRock 3D printing filaments are intended for general-purpose printing and have been tested under standard conditions. However, the performance and safety of printed objects are affected by multiple factors, including printing parameters, model design, usage environment, and the specific application.\n*By using FusRock materials, the user acknowledges and agrees to independently evaluate whether the printed parts are suitable for their intended use, and assumes all associated risks.\n*FusRock shall not be held liable for any damage, injury, or loss that may result from the use of printed products made with our materials, including but not limited to structural failure, functional defects, or safety hazards under actual usage conditions.Before applying printed parts in any critical, functional, or commercial context, thorough testing must be conducted. Except for the certifications explicitly stated for specific FusRock materials, our products are not certified for medical, aerospace, or life-support applications.\n//CN\n1.使用前请务必仔细阅读（https://wiki.fusrock.com）。\n2.打印该耗材时，可能会出现喷嘴堵塞、拉丝、翘边以及层间附着力不足等问题。为了获得更好的打印效果，请参考此维基页面：高温 / 工程材料打印技巧（https://wiki.fusrock.com）。\n3.感谢您选择FusRock。\n*此设置不一定能够适配所有模型，存在部分情况下需要您自行修改调整参数来提升打印效果。\n*FusRock 3D打印耗材适用于通用打印用途，已在标准条件下进行测试。然而，打印成品的性能与安全性受多种因素影响，包括打印参数、模型设计、使用环境及实际用途。\n*使用FusRock材料即表示用户已知悉并同意，自行评估打印件是否适用于其具体应用，并承担由此产生的全部风险。\n*FusRock对使用本公司耗材打印的产品在实际应用中可能导致的任何损害、伤害或损失不承担任何责任，包括但不限于结构失效、功能异常或使用环境中的安全隐患。在将打印件应用于关键、功能性或商业性场景前，请务必进行充分测试。除FusRock已标明材料所获得的各项认证资质外，FusRock产品未取得医疗、航天或生命支持系统认证资质。",
|
||||||
"impact_strength_z":["5.3"]
|
"impact_strength_z": [
|
||||||
|
"5.3"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,7 +5,6 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"setting_id": "GFNMKS00_00",
|
"setting_id": "GFNMKS00_00",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
|
|
||||||
"filament_max_volumetric_speed": [
|
"filament_max_volumetric_speed": [
|
||||||
"2",
|
"2",
|
||||||
"2"
|
"2"
|
||||||
|
|||||||
@@ -26,4 +26,3 @@
|
|||||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|
||||||
@@ -20,4 +20,3 @@
|
|||||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|
||||||
@@ -38,4 +38,3 @@
|
|||||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||||
]
|
]
|
||||||
}
|
}
|
||||||
|
|
||||||
@@ -1,4 +1,3 @@
|
|||||||
|
|
||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"name": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
|
"name": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
|
||||||
|
|||||||
@@ -1,4 +1,3 @@
|
|||||||
|
|
||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"name": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
|
"name": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
|
||||||
|
|||||||
@@ -1,4 +1,3 @@
|
|||||||
|
|
||||||
{
|
{
|
||||||
"type": "process",
|
"type": "process",
|
||||||
"name": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
|
"name": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
|
||||||
|
|||||||
@@ -21,5 +21,4 @@
|
|||||||
"retraction_length": [
|
"retraction_length": [
|
||||||
"0.5"
|
"0.5"
|
||||||
]
|
]
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,27 +9,60 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.2 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.2 nozzle)",
|
||||||
"nozzle_diameter": ["0.2"],
|
"nozzle_diameter": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
"printer_variant": "0.2",
|
"printer_variant": "0.2",
|
||||||
"printable_area": ["0x0", "225x0", "225x225", "0x225"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"225x0",
|
||||||
|
"225x225",
|
||||||
|
"0x225"
|
||||||
|
],
|
||||||
"printable_height": "265",
|
"printable_height": "265",
|
||||||
"extruder_clearance_height_to_lid": "245",
|
"extruder_clearance_height_to_lid": "245",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG",
|
"thumbnails_format": "PNG",
|
||||||
"machine_max_acceleration_e": ["5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["10000"],
|
"5000"
|
||||||
"machine_max_acceleration_retracting": ["10000"],
|
],
|
||||||
"machine_max_acceleration_travel": ["10000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_x": ["10000"],
|
"10000"
|
||||||
"machine_max_acceleration_y": ["10000"],
|
],
|
||||||
"machine_max_acceleration_z": ["500"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_e": ["60"],
|
"10000"
|
||||||
"machine_max_speed_x": ["500"],
|
],
|
||||||
"machine_max_speed_y": ["500"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_speed_z": ["12"]
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,27 +9,60 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.4 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.4 nozzle)",
|
||||||
"nozzle_diameter": ["0.4"],
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
"printer_variant": "0.4",
|
"printer_variant": "0.4",
|
||||||
"printable_area": ["0x0", "225x0", "225x225", "0x225"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"225x0",
|
||||||
|
"225x225",
|
||||||
|
"0x225"
|
||||||
|
],
|
||||||
"printable_height": "265",
|
"printable_height": "265",
|
||||||
"extruder_clearance_height_to_lid": "245",
|
"extruder_clearance_height_to_lid": "245",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG",
|
"thumbnails_format": "PNG",
|
||||||
"machine_max_acceleration_e": ["5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["10000"],
|
"5000"
|
||||||
"machine_max_acceleration_retracting": ["10000"],
|
],
|
||||||
"machine_max_acceleration_travel": ["10000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_x": ["10000"],
|
"10000"
|
||||||
"machine_max_acceleration_y": ["10000"],
|
],
|
||||||
"machine_max_acceleration_z": ["500"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_e": ["60"],
|
"10000"
|
||||||
"machine_max_speed_x": ["500"],
|
],
|
||||||
"machine_max_speed_y": ["500"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_speed_z": ["12"]
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,27 +9,60 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.6 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.6 nozzle)",
|
||||||
"nozzle_diameter": ["0.6"],
|
"nozzle_diameter": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
"printer_variant": "0.6",
|
"printer_variant": "0.6",
|
||||||
"printable_area": ["0x0", "225x0", "225x225", "0x225"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"225x0",
|
||||||
|
"225x225",
|
||||||
|
"0x225"
|
||||||
|
],
|
||||||
"printable_height": "265",
|
"printable_height": "265",
|
||||||
"extruder_clearance_height_to_lid": "245",
|
"extruder_clearance_height_to_lid": "245",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG",
|
"thumbnails_format": "PNG",
|
||||||
"machine_max_acceleration_e": ["5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["10000"],
|
"5000"
|
||||||
"machine_max_acceleration_retracting": ["10000"],
|
],
|
||||||
"machine_max_acceleration_travel": ["10000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_x": ["10000"],
|
"10000"
|
||||||
"machine_max_acceleration_y": ["10000"],
|
],
|
||||||
"machine_max_acceleration_z": ["500"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_e": ["60"],
|
"10000"
|
||||||
"machine_max_speed_x": ["500"],
|
],
|
||||||
"machine_max_speed_y": ["500"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_speed_z": ["12"]
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,27 +9,60 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.8 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 (0.8 nozzle)",
|
||||||
"nozzle_diameter": ["0.8"],
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
"printer_variant": "0.8",
|
"printer_variant": "0.8",
|
||||||
"printable_area": ["0x0", "225x0", "225x225", "0x225"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"225x0",
|
||||||
|
"225x225",
|
||||||
|
"0x225"
|
||||||
|
],
|
||||||
"printable_height": "265",
|
"printable_height": "265",
|
||||||
"extruder_clearance_height_to_lid": "245",
|
"extruder_clearance_height_to_lid": "245",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG",
|
"thumbnails_format": "PNG",
|
||||||
"machine_max_acceleration_e": ["5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["10000"],
|
"5000"
|
||||||
"machine_max_acceleration_retracting": ["10000"],
|
],
|
||||||
"machine_max_acceleration_travel": ["10000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_x": ["10000"],
|
"10000"
|
||||||
"machine_max_acceleration_y": ["10000"],
|
],
|
||||||
"machine_max_acceleration_z": ["500"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_e": ["60"],
|
"10000"
|
||||||
"machine_max_speed_x": ["500"],
|
],
|
||||||
"machine_max_speed_y": ["500"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_speed_z": ["12"]
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_x": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"10000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"12"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,16 +9,27 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.2 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.2 nozzle)",
|
||||||
"nozzle_diameter": ["0.2"],
|
"nozzle_diameter": [
|
||||||
|
"0.2"
|
||||||
|
],
|
||||||
"printer_variant": "0.2",
|
"printer_variant": "0.2",
|
||||||
"printable_area": ["0x0", "320x0", "320x320", "0x320"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"320x0",
|
||||||
|
"320x320",
|
||||||
|
"0x320"
|
||||||
|
],
|
||||||
"printable_height": "400",
|
"printable_height": "400",
|
||||||
"extruder_clearance_height_to_lid": "380",
|
"extruder_clearance_height_to_lid": "380",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG"
|
"thumbnails_format": "PNG"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,16 +9,27 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.4 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.4 nozzle)",
|
||||||
"nozzle_diameter": ["0.4"],
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
"printer_variant": "0.4",
|
"printer_variant": "0.4",
|
||||||
"printable_area": ["0x0", "320x0", "320x320", "0x320"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"320x0",
|
||||||
|
"320x320",
|
||||||
|
"0x320"
|
||||||
|
],
|
||||||
"printable_height": "400",
|
"printable_height": "400",
|
||||||
"extruder_clearance_height_to_lid": "380",
|
"extruder_clearance_height_to_lid": "380",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG"
|
"thumbnails_format": "PNG"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,16 +9,27 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.6 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.6 nozzle)",
|
||||||
"nozzle_diameter": ["0.6"],
|
"nozzle_diameter": [
|
||||||
|
"0.6"
|
||||||
|
],
|
||||||
"printer_variant": "0.6",
|
"printer_variant": "0.6",
|
||||||
"printable_area": ["0x0", "320x0", "320x320", "0x320"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"320x0",
|
||||||
|
"320x320",
|
||||||
|
"0x320"
|
||||||
|
],
|
||||||
"printable_height": "400",
|
"printable_height": "400",
|
||||||
"extruder_clearance_height_to_lid": "380",
|
"extruder_clearance_height_to_lid": "380",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG"
|
"thumbnails_format": "PNG"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -9,16 +9,27 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"printer_notes": "",
|
"printer_notes": "",
|
||||||
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.8 nozzle)",
|
"default_print_profile": "0.20mm Standard @LONGER LK10 Plus (0.8 nozzle)",
|
||||||
"nozzle_diameter": ["0.8"],
|
"nozzle_diameter": [
|
||||||
|
"0.8"
|
||||||
|
],
|
||||||
"printer_variant": "0.8",
|
"printer_variant": "0.8",
|
||||||
"printable_area": ["0x0", "320x0", "320x320", "0x320"],
|
"printable_area": [
|
||||||
|
"0x0",
|
||||||
|
"320x0",
|
||||||
|
"320x320",
|
||||||
|
"0x320"
|
||||||
|
],
|
||||||
"printable_height": "400",
|
"printable_height": "400",
|
||||||
"extruder_clearance_height_to_lid": "380",
|
"extruder_clearance_height_to_lid": "380",
|
||||||
"nozzle_hrc": "0",
|
"nozzle_hrc": "0",
|
||||||
"nozzle_type": "brass",
|
"nozzle_type": "brass",
|
||||||
"nozzle_volume": "0",
|
"nozzle_volume": "0",
|
||||||
"gcode_flavor": "klipper",
|
"gcode_flavor": "klipper",
|
||||||
"default_filament_profile": ["Generic PLA @System"],
|
"default_filament_profile": [
|
||||||
"thumbnails": ["300x300"],
|
"Generic PLA @System"
|
||||||
|
],
|
||||||
|
"thumbnails": [
|
||||||
|
"300x300"
|
||||||
|
],
|
||||||
"thumbnails_format": "PNG"
|
"thumbnails_format": "PNG"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -8,7 +8,9 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"bed_model": "longer_lk10plus_buildplate_model.stl",
|
"bed_model": "longer_lk10plus_buildplate_model.stl",
|
||||||
"bed_texture": "longer_lk10plus_buildplate_texture.png",
|
"bed_texture": "longer_lk10plus_buildplate_texture.png",
|
||||||
"bed_exclude_area": ["0x0"],
|
"bed_exclude_area": [
|
||||||
|
"0x0"
|
||||||
|
],
|
||||||
"hotend_model": "",
|
"hotend_model": "",
|
||||||
"default_materials": "Generic PLA @System;Generic PETG @System"
|
"default_materials": "Generic PLA @System;Generic PETG @System"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -8,7 +8,9 @@
|
|||||||
"printer_settings_id": "LONGER",
|
"printer_settings_id": "LONGER",
|
||||||
"bed_model": "longer_lk10_buildplate_model.stl",
|
"bed_model": "longer_lk10_buildplate_model.stl",
|
||||||
"bed_texture": "longer_lk10_buildplate_texture.png",
|
"bed_texture": "longer_lk10_buildplate_texture.png",
|
||||||
"bed_exclude_area": ["0x0"],
|
"bed_exclude_area": [
|
||||||
|
"0x0"
|
||||||
|
],
|
||||||
"hotend_model": "",
|
"hotend_model": "",
|
||||||
"default_materials": "Generic PLA @System;Generic PETG @System"
|
"default_materials": "Generic PLA @System;Generic PETG @System"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -6,39 +6,93 @@
|
|||||||
"printer_technology": "FFF",
|
"printer_technology": "FFF",
|
||||||
"gcode_flavor": "marlin",
|
"gcode_flavor": "marlin",
|
||||||
"silent_mode": "0",
|
"silent_mode": "0",
|
||||||
"machine_max_acceleration_e": ["5000"],
|
"machine_max_acceleration_e": [
|
||||||
"machine_max_acceleration_extruding": ["7000"],
|
"5000"
|
||||||
"machine_max_acceleration_retracting": ["7000"],
|
],
|
||||||
"machine_max_acceleration_travel": ["7000"],
|
"machine_max_acceleration_extruding": [
|
||||||
"machine_max_acceleration_x": ["7000"],
|
"7000"
|
||||||
"machine_max_acceleration_y": ["7000"],
|
],
|
||||||
"machine_max_acceleration_z": ["300"],
|
"machine_max_acceleration_retracting": [
|
||||||
"machine_max_speed_e": ["60"],
|
"7000"
|
||||||
"machine_max_speed_x": ["500"],
|
],
|
||||||
"machine_max_speed_y": ["500"],
|
"machine_max_acceleration_travel": [
|
||||||
"machine_max_speed_z": ["20"],
|
"7000"
|
||||||
"machine_min_extruding_rate": ["0"],
|
],
|
||||||
"machine_min_travel_rate": ["0"],
|
"machine_max_acceleration_x": [
|
||||||
"max_layer_height": ["0.32"],
|
"7000"
|
||||||
"min_layer_height": ["0.08"],
|
],
|
||||||
|
"machine_max_acceleration_y": [
|
||||||
|
"7000"
|
||||||
|
],
|
||||||
|
"machine_max_acceleration_z": [
|
||||||
|
"300"
|
||||||
|
],
|
||||||
|
"machine_max_speed_e": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"machine_max_speed_x": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_y": [
|
||||||
|
"500"
|
||||||
|
],
|
||||||
|
"machine_max_speed_z": [
|
||||||
|
"20"
|
||||||
|
],
|
||||||
|
"machine_min_extruding_rate": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"machine_min_travel_rate": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"max_layer_height": [
|
||||||
|
"0.32"
|
||||||
|
],
|
||||||
|
"min_layer_height": [
|
||||||
|
"0.08"
|
||||||
|
],
|
||||||
"printable_height": "250",
|
"printable_height": "250",
|
||||||
"extruder_clearance_radius": "50",
|
"extruder_clearance_radius": "50",
|
||||||
"extruder_clearance_height_to_rod": "30",
|
"extruder_clearance_height_to_rod": "30",
|
||||||
"nozzle_diameter": ["0.4"],
|
"nozzle_diameter": [
|
||||||
|
"0.4"
|
||||||
|
],
|
||||||
"printer_settings_id": "",
|
"printer_settings_id": "",
|
||||||
"printer_variant": "0.4",
|
"printer_variant": "0.4",
|
||||||
"retraction_minimum_travel": ["2"],
|
"retraction_minimum_travel": [
|
||||||
"retract_before_wipe": ["70%"],
|
"2"
|
||||||
"retract_when_changing_layer": ["1"],
|
],
|
||||||
"retraction_length": ["1"],
|
"retract_before_wipe": [
|
||||||
"retract_length_toolchange": ["1"],
|
"70%"
|
||||||
"z_hop": ["0"],
|
],
|
||||||
"retract_restart_extra": ["0"],
|
"retract_when_changing_layer": [
|
||||||
"retract_restart_extra_toolchange": ["0"],
|
"1"
|
||||||
"retraction_speed": ["35"],
|
],
|
||||||
"deretraction_speed": ["35"],
|
"retraction_length": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"retract_length_toolchange": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
|
"z_hop": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retract_restart_extra": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retract_restart_extra_toolchange": [
|
||||||
|
"0"
|
||||||
|
],
|
||||||
|
"retraction_speed": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
|
"deretraction_speed": [
|
||||||
|
"35"
|
||||||
|
],
|
||||||
"single_extruder_multi_material": "1",
|
"single_extruder_multi_material": "1",
|
||||||
"wipe": ["1"],
|
"wipe": [
|
||||||
|
"1"
|
||||||
|
],
|
||||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n\n;[layer_z]\n\nTIMELAPSE_TAKE_FRAME\n\nG92 E0.0",
|
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n\n;[layer_z]\n\nTIMELAPSE_TAKE_FRAME\n\nG92 E0.0",
|
||||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||||
"change_filament_gcode": "M600",
|
"change_filament_gcode": "M600",
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.08",
|
"support_top_z_distance": "0.08",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.12",
|
"support_top_z_distance": "0.12",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.16",
|
"support_top_z_distance": "0.16",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.24",
|
"support_top_z_distance": "0.24",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X200 E12 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.2 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.2 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.2",
|
"initial_layer_print_height": "0.2",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.6 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.6 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
+3
-1
@@ -18,7 +18,9 @@
|
|||||||
"top_shell_thickness": "0.8",
|
"top_shell_thickness": "0.8",
|
||||||
"initial_layer_print_height": "0.24",
|
"initial_layer_print_height": "0.24",
|
||||||
"support_top_z_distance": "0.28",
|
"support_top_z_distance": "0.28",
|
||||||
"compatible_printers": ["LONGER LK10 Plus (0.8 nozzle)"],
|
"compatible_printers": [
|
||||||
|
"LONGER LK10 Plus (0.8 nozzle)"
|
||||||
|
],
|
||||||
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
"start_gcode": "START_PRINT BED_TEMP={first_layer_bed_temperature[0]} EXTRUDER_TEMP_1ST={first_layer_temperature[0]} EXTRUDER_TEMP={temperature[0]} FILAMENT_DIAMETER={filament_diameter[0]}\nG92 E0\nG1 X2 Y2 F6000\nG1 Z0.28 F1000\nG1 X300 E15 F1000\nG1 E-0.8 F1800\n",
|
||||||
"end_gcode": "END_PRINT\n"
|
"end_gcode": "END_PRINT\n"
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -6,7 +6,6 @@
|
|||||||
"filament_id": "OGFB01",
|
"filament_id": "OGFB01",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||||
|
|
||||||
"activate_air_filtration": [
|
"activate_air_filtration": [
|
||||||
"0"
|
"0"
|
||||||
],
|
],
|
||||||
|
|||||||
+42
-14
@@ -6,18 +6,46 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_abs",
|
"inherits": "fdm_filament_abs",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["ABS"],
|
],
|
||||||
"nozzle_temperature": ["255"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["260"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["240"],
|
],
|
||||||
"nozzle_temperature_range_high": ["270"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["100"],
|
"ABS"
|
||||||
"hot_plate_temp_initial_layer": ["105"],
|
],
|
||||||
"chamber_temperature": ["40"],
|
"nozzle_temperature": [
|
||||||
"filament_density": ["1.04"],
|
"255"
|
||||||
"filament_cost": ["19.50"],
|
],
|
||||||
"filament_spool_weight": ["900"],
|
"nozzle_temperature_initial_layer": [
|
||||||
"filament_max_volumetric_speed": ["18"]
|
"260"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"105"
|
||||||
|
],
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.04"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"19.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"900"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"18"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+42
-14
@@ -6,18 +6,46 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_asa",
|
"inherits": "fdm_filament_asa",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["ASA"],
|
],
|
||||||
"nozzle_temperature": ["260"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["270"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["245"],
|
],
|
||||||
"nozzle_temperature_range_high": ["275"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["100"],
|
"ASA"
|
||||||
"hot_plate_temp_initial_layer": ["105"],
|
],
|
||||||
"chamber_temperature": ["40"],
|
"nozzle_temperature": [
|
||||||
"filament_density": ["1.07"],
|
"260"
|
||||||
"filament_cost": ["22.50"],
|
],
|
||||||
"filament_spool_weight": ["900"],
|
"nozzle_temperature_initial_layer": [
|
||||||
"filament_max_volumetric_speed": ["18"]
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"275"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"105"
|
||||||
|
],
|
||||||
|
"chamber_temperature": [
|
||||||
|
"40"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.07"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"22.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"900"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"18"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pet",
|
"inherits": "fdm_filament_pet",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PETG"],
|
],
|
||||||
"nozzle_temperature": ["240"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["245"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["230"],
|
],
|
||||||
"nozzle_temperature_range_high": ["260"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["80"],
|
"PETG"
|
||||||
"hot_plate_temp_initial_layer": ["85"],
|
],
|
||||||
"filament_density": ["1.27"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"240"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pet",
|
"inherits": "fdm_filament_pet",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PETG"],
|
],
|
||||||
"nozzle_temperature": ["240"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["245"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["230"],
|
],
|
||||||
"nozzle_temperature_range_high": ["260"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["80"],
|
"PETG"
|
||||||
"hot_plate_temp_initial_layer": ["85"],
|
],
|
||||||
"filament_density": ["1.27"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["17.40"],
|
"240"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"17.40"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pet",
|
"inherits": "fdm_filament_pet",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PETG"],
|
],
|
||||||
"nozzle_temperature": ["245"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["250"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["235"],
|
],
|
||||||
"nozzle_temperature_range_high": ["265"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["80"],
|
"PETG"
|
||||||
"hot_plate_temp_initial_layer": ["85"],
|
],
|
||||||
"filament_density": ["1.27"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["30.50"],
|
"245"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"235"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"265"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"85"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.27"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"30.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["216"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["220"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["195"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["30.50"],
|
"216"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"195"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"30.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["220"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["220"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["210"],
|
],
|
||||||
"nozzle_temperature_range_high": ["240"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"220"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["17.8"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"17.8"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["210"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["215"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["190"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"210"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"190"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["220"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["225"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["200"],
|
],
|
||||||
"nozzle_temperature_range_high": ["235"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.22"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["30.50"],
|
"220"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"235"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.22"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"30.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["215"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["220"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["200"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"215"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["210"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["215"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["200"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"210"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["10"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"10"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["210"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["215"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["190"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["19.90"],
|
"210"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"190"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"19.90"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["215"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["220"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["205"],
|
],
|
||||||
"nozzle_temperature_range_high": ["235"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["25.50"],
|
"215"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["8"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"205"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"235"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"25.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_pla",
|
"inherits": "fdm_filament_pla",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["PLA"],
|
],
|
||||||
"nozzle_temperature": ["210"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["215"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["200"],
|
],
|
||||||
"nozzle_temperature_range_high": ["230"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["60"],
|
"PLA"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.24"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["13.90"],
|
"210"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["15"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"200"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.24"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"13.90"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"15"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_tpu",
|
"inherits": "fdm_filament_tpu",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["TPU"],
|
],
|
||||||
"nozzle_temperature": ["220"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["225"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["210"],
|
],
|
||||||
"nozzle_temperature_range_high": ["240"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["50"],
|
"TPU"
|
||||||
"hot_plate_temp_initial_layer": ["55"],
|
],
|
||||||
"filament_density": ["1.21"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["34.99"],
|
"220"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["6"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"55"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.21"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"34.99"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"6"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_tpu",
|
"inherits": "fdm_filament_tpu",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["TPU"],
|
],
|
||||||
"nozzle_temperature": ["220"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["225"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["205"],
|
],
|
||||||
"nozzle_temperature_range_high": ["235"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["45"],
|
"TPU"
|
||||||
"hot_plate_temp_initial_layer": ["50"],
|
],
|
||||||
"filament_density": ["1.17"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["38.50"],
|
"220"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["8"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"205"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"235"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"45"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.17"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"38.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_tpu",
|
"inherits": "fdm_filament_tpu",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["TPU"],
|
],
|
||||||
"nozzle_temperature": ["225"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["230"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["215"],
|
],
|
||||||
"nozzle_temperature_range_high": ["245"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["55"],
|
"TPU"
|
||||||
"hot_plate_temp_initial_layer": ["60"],
|
],
|
||||||
"filament_density": ["1.16"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["37.90"],
|
"225"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["8"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"230"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"215"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"245"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"55"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"60"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.16"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"37.90"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"8"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
+39
-13
@@ -6,17 +6,43 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "fdm_filament_tpu",
|
"inherits": "fdm_filament_tpu",
|
||||||
"filament_color": ["#4d9398"],
|
"filament_color": [
|
||||||
"filament_vendor": ["Eolas Prints"],
|
"#4d9398"
|
||||||
"filament_type": ["TPU"],
|
],
|
||||||
"nozzle_temperature": ["220"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature_initial_layer": ["225"],
|
"Eolas Prints"
|
||||||
"nozzle_temperature_range_low": ["210"],
|
],
|
||||||
"nozzle_temperature_range_high": ["240"],
|
"filament_type": [
|
||||||
"hot_plate_temp": ["50"],
|
"TPU"
|
||||||
"hot_plate_temp_initial_layer": ["55"],
|
],
|
||||||
"filament_density": ["1.21"],
|
"nozzle_temperature": [
|
||||||
"filament_cost": ["22.50"],
|
"220"
|
||||||
"filament_spool_weight": ["1000"],
|
],
|
||||||
"filament_max_volumetric_speed": ["5"]
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"225"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"50"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"55"
|
||||||
|
],
|
||||||
|
"filament_density": [
|
||||||
|
"1.21"
|
||||||
|
],
|
||||||
|
"filament_cost": [
|
||||||
|
"22.50"
|
||||||
|
],
|
||||||
|
"filament_spool_weight": [
|
||||||
|
"1000"
|
||||||
|
],
|
||||||
|
"filament_max_volumetric_speed": [
|
||||||
|
"5"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
@@ -6,27 +6,71 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_q_common",
|
"inherits": "fdm_filament_q_common",
|
||||||
"box_temperature_range_high": ["45"],
|
"box_temperature_range_high": [
|
||||||
"chamber_temperature": ["0"],
|
"45"
|
||||||
"close_fan_the_first_x_layers": ["3"],
|
],
|
||||||
"during_print_exhaust_fan_speed": ["0"],
|
"chamber_temperature": [
|
||||||
"fan_max_speed": ["80"],
|
"0"
|
||||||
"fan_min_speed": ["20"],
|
],
|
||||||
"filament_adhesiveness_category": ["200"],
|
"close_fan_the_first_x_layers": [
|
||||||
"filament_density": ["1.05"],
|
"3"
|
||||||
"filament_flow_ratio": ["0.95"],
|
],
|
||||||
"filament_type": ["ABS"],
|
"during_print_exhaust_fan_speed": [
|
||||||
"filament_vendor": ["Bambu Lab"],
|
"0"
|
||||||
"nozzle_temperature_initial_layer": ["250"],
|
],
|
||||||
"nozzle_temperature_range_high": ["280"],
|
"fan_max_speed": [
|
||||||
"nozzle_temperature_range_low": ["240"],
|
"80"
|
||||||
"nozzle_temperature": ["260"],
|
],
|
||||||
"overhang_fan_speed": ["80"],
|
"fan_min_speed": [
|
||||||
"overhang_fan_threshold": ["25%"],
|
"20"
|
||||||
"pressure_advance": ["0.035"],
|
],
|
||||||
"slow_down_layer_time": ["4"],
|
"filament_adhesiveness_category": [
|
||||||
"temperature_vitrification": ["100"],
|
"200"
|
||||||
"hot_plate_temp_initial_layer" : ["90"],
|
],
|
||||||
"hot_plate_temp" : ["90"],
|
"filament_density": [
|
||||||
|
"1.05"
|
||||||
|
],
|
||||||
|
"filament_flow_ratio": [
|
||||||
|
"0.95"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"ABS"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Bambu Lab"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"280"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"260"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"25%"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.035"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"4"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"100"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
"compatible_printers": []
|
"compatible_printers": []
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,8 +5,16 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu ABS@Q2C-Series",
|
"inherits": "Bambu ABS@Q2C-Series",
|
||||||
"chamber_temperature": ["0"],
|
"chamber_temperature": [
|
||||||
"filament_max_volumetric_speed": ["2"],
|
"0"
|
||||||
"pressure_advance": ["0.03"],
|
],
|
||||||
"compatible_printers": ["Qidi Q2C 0.2 nozzle"]
|
"filament_max_volumetric_speed": [
|
||||||
|
"2"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.03"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.2 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,6 +5,10 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu ABS@Q2C-Series",
|
"inherits": "Bambu ABS@Q2C-Series",
|
||||||
"pressure_advance": ["0.03"],
|
"pressure_advance": [
|
||||||
"compatible_printers": ["Qidi Q2C 0.4 nozzle"]
|
"0.03"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.4 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,7 +5,13 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu ABS@Q2C-Series",
|
"inherits": "Bambu ABS@Q2C-Series",
|
||||||
"nozzle_temperature": ["250"],
|
"nozzle_temperature": [
|
||||||
"pressure_advance": ["0.014"],
|
"250"
|
||||||
"compatible_printers": ["Qidi Q2C 0.6 nozzle"]
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.014"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.6 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,8 +5,16 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu ABS@Q2C-Series",
|
"inherits": "Bambu ABS@Q2C-Series",
|
||||||
"nozzle_temperature": ["250"],
|
"nozzle_temperature": [
|
||||||
"pressure_advance": ["0.011"],
|
"250"
|
||||||
"slow_down_min_speed": ["10"],
|
],
|
||||||
"compatible_printers": ["Qidi Q2C 0.8 nozzle"]
|
"pressure_advance": [
|
||||||
|
"0.011"
|
||||||
|
],
|
||||||
|
"slow_down_min_speed": [
|
||||||
|
"10"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.8 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -6,28 +6,74 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_q_common",
|
"inherits": "fdm_filament_q_common",
|
||||||
"box_temperature_range_high": ["45"],
|
"box_temperature_range_high": [
|
||||||
"close_fan_the_first_x_layers": ["3"],
|
"45"
|
||||||
"fan_cooling_layer_time": ["30"],
|
],
|
||||||
"fan_max_speed": ["40"],
|
"close_fan_the_first_x_layers": [
|
||||||
"fan_min_speed": ["10"],
|
"3"
|
||||||
"filament_adhesiveness_category": ["300"],
|
],
|
||||||
"filament_flow_ratio": ["0.95"],
|
"fan_cooling_layer_time": [
|
||||||
"filament_max_volumetric_speed": ["13"],
|
"30"
|
||||||
"filament_type": ["PETG"],
|
],
|
||||||
"filament_vendor": ["Bambu Lab"],
|
"fan_max_speed": [
|
||||||
"nozzle_temperature_initial_layer": ["240"],
|
"40"
|
||||||
"nozzle_temperature_range_high": ["270"],
|
],
|
||||||
"nozzle_temperature_range_low": ["220"],
|
"fan_min_speed": [
|
||||||
"nozzle_temperature": ["250"],
|
"10"
|
||||||
"overhang_fan_speed": ["90"],
|
],
|
||||||
"overhang_fan_threshold": ["10%"],
|
"filament_adhesiveness_category": [
|
||||||
"pressure_advance": ["0.056"],
|
"300"
|
||||||
"slow_down_layer_time": ["8"],
|
],
|
||||||
"supertack_plate_temp_initial_layer": ["70"],
|
"filament_flow_ratio": [
|
||||||
"supertack_plate_temp": ["70"],
|
"0.95"
|
||||||
"temperature_vitrification": ["70"],
|
],
|
||||||
"hot_plate_temp_initial_layer" : ["80"],
|
"filament_max_volumetric_speed": [
|
||||||
"hot_plate_temp" : ["80"],
|
"13"
|
||||||
|
],
|
||||||
|
"filament_type": [
|
||||||
|
"PETG"
|
||||||
|
],
|
||||||
|
"filament_vendor": [
|
||||||
|
"Bambu Lab"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"270"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"220"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"250"
|
||||||
|
],
|
||||||
|
"overhang_fan_speed": [
|
||||||
|
"90"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"10%"
|
||||||
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.056"
|
||||||
|
],
|
||||||
|
"slow_down_layer_time": [
|
||||||
|
"8"
|
||||||
|
],
|
||||||
|
"supertack_plate_temp_initial_layer": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"supertack_plate_temp": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"70"
|
||||||
|
],
|
||||||
|
"hot_plate_temp_initial_layer": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
|
"hot_plate_temp": [
|
||||||
|
"80"
|
||||||
|
],
|
||||||
"compatible_printers": []
|
"compatible_printers": []
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,7 +5,13 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PETG@Q2C-Series",
|
"inherits": "Bambu PETG@Q2C-Series",
|
||||||
"filament_max_volumetric_speed": ["1"],
|
"filament_max_volumetric_speed": [
|
||||||
"pressure_advance": ["0.056"],
|
"1"
|
||||||
"compatible_printers": ["Qidi Q2C 0.2 nozzle"]
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.056"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.2 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,6 +5,10 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PETG@Q2C-Series",
|
"inherits": "Bambu PETG@Q2C-Series",
|
||||||
"pressure_advance": ["0.056"],
|
"pressure_advance": [
|
||||||
"compatible_printers": ["Qidi Q2C 0.4 nozzle"]
|
"0.056"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.4 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,6 +5,10 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PETG@Q2C-Series",
|
"inherits": "Bambu PETG@Q2C-Series",
|
||||||
"pressure_advance": ["0.04"],
|
"pressure_advance": [
|
||||||
"compatible_printers": ["Qidi Q2C 0.6 nozzle"]
|
"0.04"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.6 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,6 +5,10 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PETG@Q2C-Series",
|
"inherits": "Bambu PETG@Q2C-Series",
|
||||||
"pressure_advance": ["0.04"],
|
"pressure_advance": [
|
||||||
"compatible_printers": ["Qidi Q2C 0.8 nozzle"]
|
"0.04"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.8 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -6,17 +6,41 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "false",
|
"instantiation": "false",
|
||||||
"inherits": "fdm_filament_q_common",
|
"inherits": "fdm_filament_q_common",
|
||||||
"filament_adhesiveness_category": ["100"],
|
"filament_adhesiveness_category": [
|
||||||
"filament_type": ["PLA"],
|
"100"
|
||||||
"filament_vendor": ["Bambu Lab"],
|
],
|
||||||
"additional_cooling_fan_speed": ["100"],
|
"filament_type": [
|
||||||
"nozzle_temperature_range_high": ["240"],
|
"PLA"
|
||||||
"nozzle_temperature_range_low": ["190"],
|
],
|
||||||
"nozzle_temperature_initial_layer": ["210"],
|
"filament_vendor": [
|
||||||
"nozzle_temperature": ["210"],
|
"Bambu Lab"
|
||||||
"overhang_fan_threshold": ["50%"],
|
],
|
||||||
"supertack_plate_temp_initial_layer": ["45"],
|
"additional_cooling_fan_speed": [
|
||||||
"supertack_plate_temp": ["45"],
|
"100"
|
||||||
"temperature_vitrification": ["45"],
|
],
|
||||||
|
"nozzle_temperature_range_high": [
|
||||||
|
"240"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_range_low": [
|
||||||
|
"190"
|
||||||
|
],
|
||||||
|
"nozzle_temperature_initial_layer": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"nozzle_temperature": [
|
||||||
|
"210"
|
||||||
|
],
|
||||||
|
"overhang_fan_threshold": [
|
||||||
|
"50%"
|
||||||
|
],
|
||||||
|
"supertack_plate_temp_initial_layer": [
|
||||||
|
"45"
|
||||||
|
],
|
||||||
|
"supertack_plate_temp": [
|
||||||
|
"45"
|
||||||
|
],
|
||||||
|
"temperature_vitrification": [
|
||||||
|
"45"
|
||||||
|
],
|
||||||
"compatible_printers": []
|
"compatible_printers": []
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,7 +5,13 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PLA@Q2C-Series",
|
"inherits": "Bambu PLA@Q2C-Series",
|
||||||
"filament_max_volumetric_speed": ["2"],
|
"filament_max_volumetric_speed": [
|
||||||
"pressure_advance": ["0.034"],
|
"2"
|
||||||
"compatible_printers": ["Qidi Q2C 0.2 nozzle"]
|
],
|
||||||
|
"pressure_advance": [
|
||||||
|
"0.034"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.2 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -5,6 +5,10 @@
|
|||||||
"from": "system",
|
"from": "system",
|
||||||
"instantiation": "true",
|
"instantiation": "true",
|
||||||
"inherits": "Bambu PLA@Q2C-Series",
|
"inherits": "Bambu PLA@Q2C-Series",
|
||||||
"pressure_advance": ["0.034"],
|
"pressure_advance": [
|
||||||
"compatible_printers": ["Qidi Q2C 0.4 nozzle"]
|
"0.034"
|
||||||
|
],
|
||||||
|
"compatible_printers": [
|
||||||
|
"Qidi Q2C 0.4 nozzle"
|
||||||
|
]
|
||||||
}
|
}
|
||||||
|
|||||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user