mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 03:13:39 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,117 +1,117 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
||||
@@ -1,59 +1,146 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_re3D_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["5000", "5000"],
|
||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_acceleration_x": ["5000", "5000"],
|
||||
"machine_max_acceleration_y": ["5000", "5000"],
|
||||
"machine_max_acceleration_z": ["5000", "5000"],
|
||||
"machine_max_speed_e": ["20", "20"],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["20", "20"],
|
||||
"machine_max_jerk_e": ["2.5", "2.5"],
|
||||
"machine_max_jerk_x": ["9", "9"],
|
||||
"machine_max_jerk_y": ["9", "9"],
|
||||
"machine_max_jerk_z": ["0.2", "0.2"],
|
||||
"machine_min_extruding_rate": ["0", "0"],
|
||||
"machine_min_travel_rate": ["0", "0"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"extruder_clearance_radius": "125",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["1.0"],
|
||||
"retract_length_toolchange": ["12"],
|
||||
"z_hop": ["0"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["-0.08"],
|
||||
"retraction_speed": ["200"],
|
||||
"deretraction_speed": ["200"],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": ["0"],
|
||||
"machine_tool_change_time": ["30"],
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"wipe": ["0"],
|
||||
"default_filament_profile": [""],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": ["0x0"],
|
||||
"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
|
||||
"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM140 S0\n\nG28 X Y\nM18\nM107\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"extruders_count":["2"]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_re3D_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"extruder_clearance_radius": "125",
|
||||
"extruder_clearance_height_to_rod": "25",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"12"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"-0.08"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"200"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"200"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": [
|
||||
"0"
|
||||
],
|
||||
"machine_tool_change_time": [
|
||||
"30"
|
||||
],
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"wipe": [
|
||||
"0"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
""
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
|
||||
"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM140 S0\n\nG28 X Y\nM18\nM107\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"extruders_count": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,59 +1,139 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fgf_re3D_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["5000", "5000"],
|
||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
||||
"machine_max_acceleration_travel": ["20000", "5000"],
|
||||
"machine_max_acceleration_x": ["5000", "5000"],
|
||||
"machine_max_acceleration_y": ["5000", "5000"],
|
||||
"machine_max_acceleration_z": ["2000", "2000"],
|
||||
"machine_max_speed_e": ["60", "60"],
|
||||
"machine_max_speed_x": ["500", "500"],
|
||||
"machine_max_speed_y": ["500", "500"],
|
||||
"machine_max_speed_z": ["20", "20"],
|
||||
"machine_max_jerk_e": ["2.5", "2.5"],
|
||||
"machine_max_jerk_x": ["9", "9"],
|
||||
"machine_max_jerk_y": ["9", "9"],
|
||||
"machine_max_jerk_z": ["0.2", "0.2"],
|
||||
"machine_min_extruding_rate": ["0", "0"],
|
||||
"machine_min_travel_rate": ["0", "0"],
|
||||
"max_layer_height": ["2.25"],
|
||||
"min_layer_height": ["0.3"],
|
||||
"extruder_clearance_radius": "70",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming":"0",
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"z_hop": ["0.4"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retraction_speed": ["40"],
|
||||
"deretraction_speed": ["30"],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"wipe": ["1"],
|
||||
"default_filament_profile": ["re3D Greengate rPETG"],
|
||||
"default_print_profile": "1.0mm Standard @re3D fgf 1.75",
|
||||
"bed_exclude_area": ["0x0"],
|
||||
"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
|
||||
"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM104 S0 T2\nM140 S0\n\nG28 X Y\nM18\nM107\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fgf_re3D_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"2.25"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"extruder_clearance_radius": "70",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"re3D Greengate rPETG"
|
||||
],
|
||||
"default_print_profile": "1.0mm Standard @re3D fgf 1.75",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100\nM221 S100\nG28\nG92 E0\nG1 Z0.3 F200\n",
|
||||
"machine_end_gcode": "M104 S0 T0\nM104 S0 T1\nM104 S0 T2\nM140 S0\n\nG28 X Y\nM18\nM107\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x600",
|
||||
"0x600"
|
||||
],
|
||||
"printable_height": "590",
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"retraction_length": ["0.6"],
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x600",
|
||||
"0x600"
|
||||
],
|
||||
"printable_height": "590",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x600",
|
||||
"0x600"
|
||||
],
|
||||
"printable_height": "590",
|
||||
"max_layer_height": ["0.64"],
|
||||
"min_layer_height": ["0.3"],
|
||||
"retraction_length": ["1.0"],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x600",
|
||||
"0x600"
|
||||
],
|
||||
"printable_height": "590",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 XLT 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4 XLT",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x760",
|
||||
"0x760"
|
||||
],
|
||||
"printable_height": "900",
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"retraction_length": ["0.6"],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 XLT 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4 XLT",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"590x0",
|
||||
"590x760",
|
||||
"0x760"
|
||||
],
|
||||
"printable_height": "900",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4 XLT",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"600x0",
|
||||
"600x760",
|
||||
"0x760"
|
||||
],
|
||||
"printable_height": "900",
|
||||
"max_layer_height": ["0.64"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"retraction_length": ["1.0"],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot 4 XLT 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_re3D_common",
|
||||
"printer_model": "re3D Gigabot 4 XLT",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"600x0",
|
||||
"600x760",
|
||||
"0x760"
|
||||
],
|
||||
"printable_height": "900",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot 4 XLT",
|
||||
"model_id": "GB4XLT",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot 4 XLT",
|
||||
"model_id": "GB4XLT",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot 4",
|
||||
"model_id": "GB4",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot 4",
|
||||
"model_id": "GB4",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot X2 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Gigabot X2",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"552x0",
|
||||
"552x593",
|
||||
"0x593"
|
||||
],
|
||||
"printable_height": "470",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot X2 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Gigabot X2",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"552x0",
|
||||
"552x593",
|
||||
"0x593"
|
||||
],
|
||||
"printable_height": "470",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot X2 XLT 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Gigabot X2 XLT",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"552x0",
|
||||
"552x740",
|
||||
"0x740"
|
||||
],
|
||||
"printable_height": "765",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Gigabot X2 XLT 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Gigabot X2 XLT",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"552x0",
|
||||
"552x740",
|
||||
"0x740"
|
||||
],
|
||||
"printable_height": "765",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot X2 XLT",
|
||||
"model_id": "GBX2XLT",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot X2 XLT",
|
||||
"model_id": "GBX2XLT",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot X2",
|
||||
"model_id": "GBX2",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND-NOZZLE.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "re3D Gigabot X2",
|
||||
"model_id": "GBX2",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND-NOZZLE.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"915x0",
|
||||
"915x915",
|
||||
"0x915"
|
||||
],
|
||||
"printable_height": "1000",
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"retraction_length": ["0.6"],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot 4 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"915x0",
|
||||
"915x915",
|
||||
"0x915"
|
||||
],
|
||||
"printable_height": "1000",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"default_print_profile": "0.28mm Standard @re3D fdm 0.4"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,31 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"915x0",
|
||||
"915x915",
|
||||
"0x915"
|
||||
],
|
||||
"printable_height": "1000",
|
||||
"max_layer_height": ["0.64"],
|
||||
"min_layer_height": ["0.2"],
|
||||
"retraction_length": ["1.0"],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot 4",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"915x0",
|
||||
"915x915",
|
||||
"0x915"
|
||||
],
|
||||
"printable_height": "1000",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.2mm Standard @re3D fdm 0.8"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Terabot 4",
|
||||
"model_id": "TB4",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "re3D Terabot 4",
|
||||
"model_id": "TB4",
|
||||
"nozzle_diameter": "0.4;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GB-HOTEND.stl",
|
||||
"default_materials": "re3D PLA;re3D PETG;re3D PC;"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot X2 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot X2",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"879x0",
|
||||
"879x908",
|
||||
"0x908"
|
||||
],
|
||||
"printable_height": "830",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "re3D Terabot X2 1.75 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fgf_re3D_common",
|
||||
"printer_model": "re3D Terabot X2",
|
||||
"nozzle_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"879x0",
|
||||
"879x908",
|
||||
"0x908"
|
||||
],
|
||||
"printable_height": "830",
|
||||
"extruder_clearance_height_to_rod": "220",
|
||||
"extruder_clearance_height_to_lid": "630",
|
||||
"max_layer_height": [
|
||||
"1.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "1.75"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "re3D Terabot X2",
|
||||
"model_id": "TBX2",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "re3D Terabot X2",
|
||||
"model_id": "TBX2",
|
||||
"nozzle_diameter": "1.75",
|
||||
"machine_tech": "FFF",
|
||||
"family": "re3D",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Gigabot 4_buildplate_texture.png",
|
||||
"hotend_model": "GBX-HOTEND.stl",
|
||||
"default_materials": "re3D rPP;re3D Greengate rPETG;"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user