mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-24 05:35:17 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,300 +1,300 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"setting_id": "IQS2",
|
||||
"filament_id": "IQM2",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"75"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"iQ TiQ8 0.4 Nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [
|
||||
"0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle)"
|
||||
],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FFFFFF"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"0"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Filament file version 1.0 20250620"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.2%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"99.18%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M109 S{nozzle_temperature_initial_layer[current_extruder]}\nG1 x-12 Y-13 Z44 F4000\nG4 P400\nG1 X-55\nG1 X-13 Y-4\nG1 X-51 Y-26\nG1 X-12 Y-13\nG1 X-55\nG1 X-13 Y-4\nG1 X-51 Y-26\nG1 X-12 Y-13\nG1 x-12 Y-13 F4000; Filament gcode\n{if layer_z==0}G1 Z{first_layer_height + 2.0}{endif}\n{if layer_z==0}G1 X[first_layer_print_min_0] Y[first_layer_print_min_1]{endif}\n{if layer_z==0}G1 Z{layer_z}{endif}\n",
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS Material4Print Natur"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"iQ Materials"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"internal_bridge_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"setting_id": "IQS2",
|
||||
"filament_id": "IQM2",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"adaptive_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_bridges": [
|
||||
"0"
|
||||
],
|
||||
"adaptive_pressure_advance_model": [
|
||||
"0,0,0\n0,0,0"
|
||||
],
|
||||
"adaptive_pressure_advance_overhangs": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"75"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"iQ TiQ8 0.4 Nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [
|
||||
"0.20mm Standard @iQ TiQ8 P1 - ABS Natur Material4Print (0.4 Nozzle)"
|
||||
],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#FFFFFF"
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"0"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.5"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"2"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"50"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Filament file version 1.0 20250620"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.2%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"99.18%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M109 S{nozzle_temperature_initial_layer[current_extruder]}\nG1 x-12 Y-13 Z44 F4000\nG4 P400\nG1 X-55\nG1 X-13 Y-4\nG1 X-51 Y-26\nG1 X-12 Y-13\nG1 X-55\nG1 X-13 Y-4\nG1 X-51 Y-26\nG1 X-12 Y-13\nG1 x-12 Y-13 F4000; Filament gcode\n{if layer_z==0}G1 Z{first_layer_height + 2.0}{endif}\n{if layer_z==0}G1 X[first_layer_print_min_0] Y[first_layer_print_min_1]{endif}\n{if layer_z==0}G1 Z{layer_z}{endif}\n",
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS Material4Print Natur"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"iQ Materials"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"internal_bridge_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"pellet_flow_coefficient": [
|
||||
"0.4157"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user