mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"printer_variant": "0.2",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"printer_variant": "0.2",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR",
|
||||
"default_bed_type": "4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"machine_load_filament_time": "80",
|
||||
"machine_unload_filament_time": "40",
|
||||
"adaptive_bed_mesh_margin": "5",
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"80%"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0.02"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR",
|
||||
"default_bed_type": "4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"machine_load_filament_time": "80",
|
||||
"machine_unload_filament_time": "40",
|
||||
"adaptive_bed_mesh_margin": "5",
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"80%"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0.02"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM005",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM005",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM010",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM010",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,65 +1,65 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM013",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM013",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM011",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM011",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM012",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM012",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM015",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM015",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,65 +1,65 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM014",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM014",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM016",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM016",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM017",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM017",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra S",
|
||||
"model_id": "WonderMaker ZR Ultra S",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra S",
|
||||
"model_id": "WonderMaker ZR Ultra S",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra",
|
||||
"model_id": "WonderMaker ZR Ultra",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra",
|
||||
"model_id": "WonderMaker ZR Ultra",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR",
|
||||
"model_id": "WonderMaker ZR",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR",
|
||||
"model_id": "WonderMaker ZR",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,140 +1,140 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0",
|
||||
"18x0",
|
||||
"18x28",
|
||||
"0x28"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.18mm Standard @WonderMaker ZR",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"290"
|
||||
],
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"support_multi_bed_types": "1",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"single_extruder_multi_material": "1",
|
||||
"layer_change_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"time_lapse_gcode": ";TIMELAPSE_TAKE_FRAME"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0",
|
||||
"18x0",
|
||||
"18x28",
|
||||
"0x28"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.18mm Standard @WonderMaker ZR",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"290"
|
||||
],
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"support_multi_bed_types": "1",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"single_extruder_multi_material": "1",
|
||||
"layer_change_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"time_lapse_gcode": ";TIMELAPSE_TAKE_FRAME"
|
||||
}
|
||||
|
||||
@@ -1,127 +1,127 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"default_print_profile": "",
|
||||
"upward_compatible_machine": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] CHAMBER=[chamber_temperature] INITIAL_TOOL=[initial_tool] MESH_MIN_X={adaptive_bed_mesh_min[0]} MESH_MIN_Y={adaptive_bed_mesh_min[1]} MESH_MAX_X={adaptive_bed_mesh_max[0]} MESH_MAX_Y={adaptive_bed_mesh_max[1]} PROBE_COUNT_X={bed_mesh_probe_count[0]} PROBE_COUNT_Y={bed_mesh_probe_count[1]}\n",
|
||||
"machine_end_gcode": ";PRINT_END"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"default_print_profile": "",
|
||||
"upward_compatible_machine": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] CHAMBER=[chamber_temperature] INITIAL_TOOL=[initial_tool] MESH_MIN_X={adaptive_bed_mesh_min[0]} MESH_MIN_Y={adaptive_bed_mesh_min[1]} MESH_MAX_X={adaptive_bed_mesh_max[0]} MESH_MAX_Y={adaptive_bed_mesh_max[1]} PROBE_COUNT_X={bed_mesh_probe_count[0]} PROBE_COUNT_Y={bed_mesh_probe_count[1]}\n",
|
||||
"machine_end_gcode": ";PRINT_END"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user