mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ABS @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB01_07",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ABS @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker ABS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB01_07",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB00",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB00",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ASA @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB01_07",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ASA @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker ASA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB01_07",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ASA",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB01",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"31.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker ASA",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB01",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"31.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PET-CF @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFST01_00",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PET-CF @WonderMaker ZR Ultra S",
|
||||
"inherits": "WonderMaker PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFST01_00",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,101 +1,101 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PET-CF",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFT01",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"84.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.29"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"185"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PET-CF",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFT01",
|
||||
"instantiation": "true",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"84.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.29"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"185"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,89 +1,89 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PETG Basic",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG00",
|
||||
"instantiation": "true",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PETG Basic",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG00",
|
||||
"instantiation": "true",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,52 +1,52 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Basic",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA00",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Basic",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA00",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Marble",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA07",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Marble",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA07",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,49 +1,49 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Matte",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA01",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"5%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Matte",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA01",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"5%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Metal",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA02",
|
||||
"instantiation": "true",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Metal",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA02",
|
||||
"instantiation": "true",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Silk",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA05",
|
||||
"instantiation": "true",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"5%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Silk",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA05",
|
||||
"instantiation": "true",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"5%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Wood",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA16",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PLA Wood",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFA16",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,50 +1,50 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PVA",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS04",
|
||||
"instantiation": "true",
|
||||
"description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
|
||||
"filament_cost": [
|
||||
"79.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker PVA",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS04",
|
||||
"instantiation": "true",
|
||||
"description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
|
||||
"filament_cost": [
|
||||
"79.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "WonderMaker TPU 95A",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "WonderMaker TPU 95A",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle",
|
||||
"WonderMaker ZR 0.4 nozzle",
|
||||
"WonderMaker ZR 0.6 nozzle",
|
||||
"WonderMaker ZR 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_bvoh",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"69.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.13"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_bvoh",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"69.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.13"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,180 +1,180 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_eva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"EVA"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_eva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"EVA"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_hips",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"HIPS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.06"
|
||||
],
|
||||
"filament_cost": [
|
||||
"22.99"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_hips",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"HIPS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.06"
|
||||
],
|
||||
"filament_cost": [
|
||||
"22.99"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pctg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pctg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pe",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PE"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pe",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PE"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pha",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_type": [
|
||||
"PHA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pha",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_type": [
|
||||
"PHA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pp",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"34.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pp",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"34.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_ppa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.17"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PPA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"280"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"210"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_ppa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.17"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PPA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"WonderMaker"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"280"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"210"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pps",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.36"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"4"
|
||||
],
|
||||
"filament_type": [
|
||||
"PPS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"340"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"300"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"125"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pps",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.36"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"4"
|
||||
],
|
||||
"filament_type": [
|
||||
"PPS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"320"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"340"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"300"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"125"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,94 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_sbs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_type": [
|
||||
"SBS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"40"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_sbs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"23"
|
||||
],
|
||||
"filament_type": [
|
||||
"SBS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.02"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"40"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"printer_variant": "0.2",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"printer_variant": "0.2",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR",
|
||||
"default_bed_type": "4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"machine_load_filament_time": "80",
|
||||
"machine_unload_filament_time": "40",
|
||||
"adaptive_bed_mesh_margin": "5",
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"80%"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0.02"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR",
|
||||
"default_bed_type": "4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"purge_in_prime_tower": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"machine_load_filament_time": "80",
|
||||
"machine_unload_filament_time": "40",
|
||||
"adaptive_bed_mesh_margin": "5",
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"80%"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0.02"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM005",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM005",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM010",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM010",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,65 +1,65 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM013",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM013",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM011",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM011",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM012",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM012",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra",
|
||||
"printer_variant": "0.8",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM015",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.2 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM015",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"printer_variant": "0.2",
|
||||
"default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,65 +1,65 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM014",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM014",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"default_bed_type": "4",
|
||||
"default_filament_profile": [
|
||||
"WonderMaker PLA Basic"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x270",
|
||||
"0x270"
|
||||
],
|
||||
"bed_exclude_area": [],
|
||||
"printable_height": "290",
|
||||
"extruder_clearance_radius": "134",
|
||||
"bed_mesh_min": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"bed_mesh_max": [
|
||||
"290",
|
||||
"260"
|
||||
],
|
||||
"bed_mesh_probe_distance": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"machine_tool_change_time": "10",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"retract_lift_below": [
|
||||
"279",
|
||||
"279",
|
||||
"279",
|
||||
"279"
|
||||
],
|
||||
"enable_long_retraction_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM016",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.6 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM016",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4",
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM017",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WonderMaker ZR Ultra S 0.8 nozzle",
|
||||
"inherits": "WonderMaker ZR Ultra S 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GM017",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WonderMaker ZR Ultra S",
|
||||
"default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3",
|
||||
"3",
|
||||
"3",
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra S",
|
||||
"model_id": "WonderMaker ZR Ultra S",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra S",
|
||||
"model_id": "WonderMaker ZR Ultra S",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra",
|
||||
"model_id": "WonderMaker ZR Ultra",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR Ultra",
|
||||
"model_id": "WonderMaker ZR Ultra",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR",
|
||||
"model_id": "WonderMaker ZR",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WonderMaker ZR",
|
||||
"model_id": "WonderMaker ZR",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WonderMaker",
|
||||
"bed_model": "wm_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "wm_3dp_hotend.stl",
|
||||
"default_materials": "WonderMaker PLA Basic;WonderMaker PETG Basic;WonderMaker ABS"
|
||||
}
|
||||
|
||||
@@ -1,140 +1,140 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0",
|
||||
"18x0",
|
||||
"18x28",
|
||||
"0x28"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.18mm Standard @WonderMaker ZR",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"290"
|
||||
],
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"support_multi_bed_types": "1",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"single_extruder_multi_material": "1",
|
||||
"layer_change_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"time_lapse_gcode": ";TIMELAPSE_TAKE_FRAME"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0",
|
||||
"18x0",
|
||||
"18x28",
|
||||
"0x28"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.18mm Standard @WonderMaker ZR",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"290"
|
||||
],
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_volume": "107",
|
||||
"printer_structure": "corexy",
|
||||
"best_object_pos": "0.5x0.5",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"support_multi_bed_types": "1",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"single_extruder_multi_material": "1",
|
||||
"layer_change_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"time_lapse_gcode": ";TIMELAPSE_TAKE_FRAME"
|
||||
}
|
||||
|
||||
@@ -1,127 +1,127 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"default_print_profile": "",
|
||||
"upward_compatible_machine": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] CHAMBER=[chamber_temperature] INITIAL_TOOL=[initial_tool] MESH_MIN_X={adaptive_bed_mesh_min[0]} MESH_MIN_Y={adaptive_bed_mesh_min[1]} MESH_MAX_X={adaptive_bed_mesh_max[0]} MESH_MAX_Y={adaptive_bed_mesh_max[1]} PROBE_COUNT_X={bed_mesh_probe_count[0]} PROBE_COUNT_Y={bed_mesh_probe_count[1]}\n",
|
||||
"machine_end_gcode": ";PRINT_END"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"support_chamber_temp_control": "0",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "klipper",
|
||||
"silent_mode": "0",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "300",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"support_air_filtration": "0",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [],
|
||||
"default_print_profile": "",
|
||||
"upward_compatible_machine": [],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] CHAMBER=[chamber_temperature] INITIAL_TOOL=[initial_tool] MESH_MIN_X={adaptive_bed_mesh_min[0]} MESH_MIN_Y={adaptive_bed_mesh_min[1]} MESH_MAX_X={adaptive_bed_mesh_max[0]} MESH_MAX_Y={adaptive_bed_mesh_max[1]} PROBE_COUNT_X={bed_mesh_probe_count[0]} PROBE_COUNT_Y={bed_mesh_probe_count[1]}\n",
|
||||
"machine_end_gcode": ";PRINT_END"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP018",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP018",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP014",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP014",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP019",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP019",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"inherits": "fdm_process_wm_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.2 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP020",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP020",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP072",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP072",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP015",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP015",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP022",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP022",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP005",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP005",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP068",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP068",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Optimal @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Optimal @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP069",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP069",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP023",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @WonderMaker ZR Ultra",
|
||||
"inherits": "fdm_process_wm_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP023",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.4 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP006",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @WonderMaker ZR",
|
||||
"inherits": "fdm_process_wm_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP006",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP010",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP010",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP016",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP016",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Optimal @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP033",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.32mm Optimal @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP033",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP075",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP075",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP030",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP030",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP070",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP070",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP009",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP009",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP017",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP017",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP031",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP031",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP073",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"inherits": "fdm_process_wm_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP073",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.6 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP034",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP034",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP074",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP074",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.56_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP035",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.56_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP035",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.56_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP071",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"inherits": "fdm_process_wm_0.56_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP071",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"preheat_time": "30",
|
||||
"standby_temperature_delta": "-80",
|
||||
"prime_tower_width": "24",
|
||||
"prime_volume": "15",
|
||||
"compatible_printers": [
|
||||
"WonderMaker ZR Ultra 0.8 nozzle",
|
||||
"WonderMaker ZR Ultra S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,75 +1,75 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"ironing_inset": "0.21",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "2",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "40",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [],
|
||||
"smooth_coefficient": "80",
|
||||
"overhang_totally_speed": "19",
|
||||
"scarf_angle_threshold": "155"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"ironing_inset": "0.21",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "2",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "40",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [],
|
||||
"smooth_coefficient": "80",
|
||||
"overhang_totally_speed": "19",
|
||||
"scarf_angle_threshold": "155"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.06",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.06",
|
||||
"support_bottom_z_distance": "0.06"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.06_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.06",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.06",
|
||||
"support_bottom_z_distance": "0.06"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.08",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"bridge_flow": "1",
|
||||
"ironing_flow": "8%",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "450",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.08",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"bridge_flow": "1",
|
||||
"ironing_flow": "8%",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "450",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.08_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.10_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.12",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "430",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.12",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "430",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wm_0.12_nozzle_0.2",
|
||||
"inherits": "fdm_process_wm_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"ironing_inset": "0.11",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user