mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,86 +1,86 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Wanhao D12-300 0.4 nozzle",
|
||||
"inherits": "fdm_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Wanhao D12-300",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"deretraction_speed": [
|
||||
"70"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.10"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1.5"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.15mm Optimal @Wanhao D12-300",
|
||||
"machine_start_gcode": "; Wanhao D12-300 Start G-code\n; M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S60 ; Set Heat Bed temperature\nM190 S60 ; Wait for Heat Bed temperature\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28 ; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S[first_layer_temperature] ; Set Extruder temperature\nM109 S[first_layer_temperature] ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish",
|
||||
"machine_end_gcode": "; Wanhao D12-300 Default End Gcode\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Wanhao D12-300 0.4 nozzle",
|
||||
"inherits": "fdm_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Wanhao D12-300",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"deretraction_speed": [
|
||||
"70"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.3"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.10"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1.5"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.15mm Optimal @Wanhao D12-300",
|
||||
"machine_start_gcode": "; Wanhao D12-300 Start G-code\n; M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S60 ; Set Heat Bed temperature\nM190 S60 ; Wait for Heat Bed temperature\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28 ; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S[first_layer_temperature] ; Set Extruder temperature\nM109 S[first_layer_temperature] ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish",
|
||||
"machine_end_gcode": "; Wanhao D12-300 Default End Gcode\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
|
||||
}
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Wanhao D12-300",
|
||||
"renamed_from": "Wanhao D12/300",
|
||||
"model_id": "D12",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Wanhao",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Wanhao_D12-300_buildplate_texture.png",
|
||||
"hotend_model": "Wanhao D12-300_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic TPU @System;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Wanhao D12-300",
|
||||
"renamed_from": "Wanhao D12/300",
|
||||
"model_id": "D12",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Wanhao",
|
||||
"bed_model": "",
|
||||
"bed_texture": "Wanhao_D12-300_buildplate_texture.png",
|
||||
"hotend_model": "Wanhao D12-300_hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic TPU @System;"
|
||||
}
|
||||
|
||||
@@ -1,117 +1,117 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
||||
@@ -1,139 +1,139 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_wanhao_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @BIQU",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_wanhao_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @BIQU",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Wanhao D12-400",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "6",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Wanhao D12-400",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "6",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.15mm Optimal @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "5",
|
||||
"layer_height": "0.15",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.15mm Optimal @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "5",
|
||||
"layer_height": "0.15",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"top_surface_line_width": "0.45",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Wanhao D12-300",
|
||||
"inherits": "fdm_process_wanhao_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"top_surface_line_width": "0.45",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,70 +1,70 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"compatible_printers": [],
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "3",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"compatible_printers": [],
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "25%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "3",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0"
|
||||
}
|
||||
|
||||
@@ -1,107 +1,107 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_wanhao_common",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "40",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"top_surface_acceleration": "500",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "700",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "23%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "3",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "1",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "150",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "20",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "50",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "35",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_wanhao_common",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "40",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"top_surface_acceleration": "500",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.4",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "700",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "23%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "3",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "1",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.4",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "150",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "20",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "50",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "35",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Wanhao D12-300 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user