mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.2mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"setting_id": "GM001",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type" : "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.2mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"setting_id": "GM001",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.3mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_variant": "0.3",
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.3mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
"nozzle_diameter": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_variant": "0.3",
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.4mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.4mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.6mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D PhoenixProV1 0.6mm nozzle",
|
||||
"inherits": "fdm_machine_phoenixprov1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D PhoenixProV1",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,13 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WEMAKE3D PhoenixProV1",
|
||||
"model_id": "v1",
|
||||
"nozzle_diameter": "0.2;0.3;0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WEMAKE3D",
|
||||
"bed_model": "WEMAKE3D PhoenixProV1_buildplate_model.stl",
|
||||
"bed_texture": "WEMAKE3D PhoenixProV1_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PETG @System;Generic PLA @System"
|
||||
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WEMAKE3D PhoenixProV1",
|
||||
"model_id": "v1",
|
||||
"nozzle_diameter": "0.2;0.3;0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WEMAKE3D",
|
||||
"bed_model": "WEMAKE3D PhoenixProV1_buildplate_model.stl",
|
||||
"bed_texture": "WEMAKE3D PhoenixProV1_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PETG @System;Generic PLA @System"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.2mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type" : "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.2mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.3mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_variant": "0.3",
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.3mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
"nozzle_diameter": [
|
||||
"0.3"
|
||||
],
|
||||
"printer_variant": "0.3",
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.4mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.4mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.6mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "WEMAKE3D TinyBotV1 0.6mm nozzle",
|
||||
"inherits": "fdm_machine_tinybotv1_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "WEMAKE3D TinyBotV1",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printer_settings_id": "WEMAKE3D",
|
||||
"nozzle_type": "brass"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "WEMAKE3D TinyBotV1",
|
||||
"model_id": "v1",
|
||||
"nozzle_diameter": "0.2;0.3;0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WEMAKE3D",
|
||||
"bed_model": "WEMAKE3D TinyBotV1_buildplate_model.stl",
|
||||
"bed_texture": "WEMAKE3D TinyBotV1_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PETG @System;Generic PLA @System"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "WEMAKE3D TinyBotV1",
|
||||
"model_id": "v1",
|
||||
"nozzle_diameter": "0.2;0.3;0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "WEMAKE3D",
|
||||
"bed_model": "WEMAKE3D TinyBotV1_buildplate_model.stl",
|
||||
"bed_texture": "WEMAKE3D TinyBotV1_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PETG @System;Generic PLA @System"
|
||||
}
|
||||
|
||||
@@ -1,143 +1,143 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin2",
|
||||
"printer_technology": "FFF",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin2",
|
||||
"printer_technology": "FFF",
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,135 +1,137 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_phoenixprov1_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printable_area": [ "0x0", "300x0", "300x300", "0x300" ],
|
||||
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG34; Align Z\nG29; UBL\n\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_phoenixprov1_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG34; Align Z\nG29; UBL\n\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,143 +1,147 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_tinybotv1_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"thumbnails": "",
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printable_area": [ "0x0", "210x0", "210x210", "0x210" ],
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29; UBL\n\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y200 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_tinybotv1_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"thumbnails": "",
|
||||
"machine_max_acceleration_e": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"210x0",
|
||||
"210x210",
|
||||
"0x210"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.2",
|
||||
"0.3",
|
||||
"0.4",
|
||||
"0.6"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29; UBL\n\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y200 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": "",
|
||||
"machine_pause_gcode": "M600\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user