mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 19:12:17 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"skirt_speed": "60",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"skirt_speed": "60",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"skirt_speed": "60",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"skirt_speed": "60",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Compatible speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "40",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"top_surface_speed": "60",
|
||||
"gap_infill_speed": "60",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_speed": "60",
|
||||
"support_speed": "60",
|
||||
"support_interface_speed": "60",
|
||||
"skirt_speed": "60",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)",
|
||||
"VS30MK2 (0.4 nozzle)",
|
||||
"VS20MK2 (0.4 nozzle)",
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "220",
|
||||
"initial_layer_infill_speed": "220",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "280",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"top_surface_speed": "150",
|
||||
"gap_infill_speed": "350",
|
||||
"sparse_infill_speed": "350",
|
||||
"support_speed": "350",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "350",
|
||||
"support_interface_speed": "350",
|
||||
"skirt_speed": "220",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "4",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Full performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "180",
|
||||
"initial_layer_infill_speed": "180",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "250",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "160",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "160",
|
||||
"initial_layer_infill_speed": "160",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "220",
|
||||
"internal_solid_infill_speed": "280",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "280",
|
||||
"sparse_infill_speed": "280",
|
||||
"support_speed": "280",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "280",
|
||||
"support_interface_speed": "280",
|
||||
"skirt_speed": "200",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "160",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "160",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "160",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "160",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "160",
|
||||
"inner_wall_speed": "200",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "160",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "150",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "150",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "150",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "150",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "150",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"skirt_speed": "135",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"skirt_speed": "135",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"skirt_speed": "135",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"skirt_speed": "135",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "High speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "90",
|
||||
"inner_wall_speed": "135",
|
||||
"internal_solid_infill_speed": "135",
|
||||
"top_surface_speed": "135",
|
||||
"gap_infill_speed": "135",
|
||||
"sparse_infill_speed": "135",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "135",
|
||||
"support_interface_speed": "135",
|
||||
"skirt_speed": "135",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.4 nozzle)",
|
||||
"EXO65 Performance (0.6 nozzle)",
|
||||
"EXO65 Performance (0.8 nozzle)",
|
||||
"SH65 Performance (0.4 nozzle)",
|
||||
"EXO42 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO42 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"EXO65 IDRE MIRROR MODE (0.4 nozzle)",
|
||||
"SH65 IDRE COPY MODE (0.4 nozzle)",
|
||||
"SH65 IDRE MIRROR MODE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance DUAL - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "130",
|
||||
"initial_layer_infill_speed": "130",
|
||||
"outer_wall_speed": "130",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "220",
|
||||
"top_surface_speed": "120",
|
||||
"gap_infill_speed": "220",
|
||||
"sparse_infill_speed": "220",
|
||||
"support_speed": "220",
|
||||
"travel_speed": "600",
|
||||
"initial_layer_travel_speed": "600",
|
||||
"support_interface_speed": "220",
|
||||
"support_interface_speed": "220",
|
||||
"skirt_speed": "130",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "20",
|
||||
"prime_volume": "20",
|
||||
"prime_tower_brim_width": "4",
|
||||
"wipe_tower_max_purge_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 IDRE (0.4 nozzle)",
|
||||
"EXO65 IDRE (0.4 nozzle)",
|
||||
"SH65 IDRE (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal performance VS30 - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "150",
|
||||
"sparse_infill_speed": "150",
|
||||
"support_speed": "150",
|
||||
"travel_speed": "300",
|
||||
"initial_layer_travel_speed": "300",
|
||||
"support_interface_speed": "150",
|
||||
"support_interface_speed": "150",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"VS30SC2 Performance (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "100",
|
||||
"inner_wall_speed": "130",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "130",
|
||||
"sparse_infill_speed": "130",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "130",
|
||||
"support_interface_speed": "130",
|
||||
"skirt_speed": "130",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Normal speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "70",
|
||||
"inner_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"gap_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"travel_speed": "135",
|
||||
"support_speed": "100",
|
||||
"support_interface_speed": "100",
|
||||
"skirt_speed": "100",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30MK3 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed (Stage 2) - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "100",
|
||||
"initial_layer_infill_speed": "100",
|
||||
"outer_wall_speed": "140",
|
||||
"inner_wall_speed": "180",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"top_surface_speed": "140",
|
||||
"gap_infill_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"travel_speed": "200",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "200",
|
||||
"skirt_speed": "200",
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 Stage 2 (0.4 nozzle)",
|
||||
"EXO65 Stage 2 (0.6 nozzle)",
|
||||
"SH65 Stage 2 (0.4 nozzle)",
|
||||
"VS30SC2 Stage 2 (0.4 nozzle)",
|
||||
"VS30MK3 Stage 2 (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.10mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"bottom_shell_layers": "10",
|
||||
"top_shell_layers": "10",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"skirt_speed": "170",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.15mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"bottom_shell_layers": "8",
|
||||
"top_shell_layers": "8",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"skirt_speed": "170",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.20mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"skirt_speed": "170",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.25mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"skirt_speed": "170",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "Very high speed - 0.30mm",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_volumic_common",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "3",
|
||||
"initial_layer_speed": "80",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"outer_wall_speed": "110",
|
||||
"inner_wall_speed": "170",
|
||||
"internal_solid_infill_speed": "170",
|
||||
"top_surface_speed": "170",
|
||||
"gap_infill_speed": "170",
|
||||
"sparse_infill_speed": "170",
|
||||
"travel_speed": "170",
|
||||
"support_speed": "170",
|
||||
"support_interface_speed": "170",
|
||||
"skirt_speed": "170",
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"EXO42 (0.4 nozzle)",
|
||||
"EXO65 (0.6 nozzle)",
|
||||
"SH65 (0.4 nozzle)",
|
||||
"VS30SC2 (0.4 nozzle)",
|
||||
"VS30SC (0.4 nozzle)",
|
||||
"VS30ULTRA (0.4 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,119 +1,146 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_volumic_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"type": "process",
|
||||
"name": "fdm_process_volumic_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"precise_outer_wall": "1",
|
||||
"enable_overhang_speed": "1",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "0",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"overhang_reverse": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"accel_to_decel_enable": "0",
|
||||
"default_acceleration": ["0","0"],
|
||||
"outer_wall_acceleration": ["0","0"],
|
||||
"inner_wall_acceleration": ["0","0"],
|
||||
"bridge_acceleration": ["0","0"],
|
||||
"sparse_infill_acceleration": ["0","0"],
|
||||
"internal_solid_infill_acceleration": ["0","0"],
|
||||
"initial_layer_acceleration": ["0","0"],
|
||||
"top_surface_acceleration": ["0","0"],
|
||||
"travel_acceleration": ["0","0"],
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "100",
|
||||
"default_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"bridge_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"internal_solid_infill_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "100",
|
||||
"internal_bridge_speed": "100",
|
||||
"thick_bridges": "1",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "6",
|
||||
"brim_object_gap": "0",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "120%",
|
||||
"line_width": "120%",
|
||||
"initial_layer_line_width": "120%",
|
||||
"sparse_infill_line_width": "120%",
|
||||
"inner_wall_line_width": "120%",
|
||||
"internal_solid_infill_line_width": "120%",
|
||||
"support_line_width": "120%",
|
||||
"top_surface_line_width": "120%",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "25%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"infill_combination": "1",
|
||||
"brim_type": "no_brim",
|
||||
"brim_width": "6",
|
||||
"brim_object_gap": "0",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_line_width": "120%",
|
||||
"line_width": "120%",
|
||||
"initial_layer_line_width": "120%",
|
||||
"sparse_infill_line_width": "120%",
|
||||
"inner_wall_line_width": "120%",
|
||||
"internal_solid_infill_line_width": "120%",
|
||||
"support_line_width": "120%",
|
||||
"top_surface_line_width": "120%",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "25%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"infill_combination": "1",
|
||||
"infill_combination_max_layer_height": "75%",
|
||||
"infill_anchor":"20%",
|
||||
"infill_wall_overlap": "20%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "30%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "40",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "0",
|
||||
"overhang_3_4_speed": "100",
|
||||
"overhang_4_4_speed": "100",
|
||||
"wall_loops": "3",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"infill_anchor": "20%",
|
||||
"infill_wall_overlap": "20%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "30%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "40",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "0",
|
||||
"overhang_3_4_speed": "100",
|
||||
"overhang_4_4_speed": "100",
|
||||
"wall_loops": "3",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"raft_first_layer_expansion": "0",
|
||||
"skirt_loops": "1",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.01",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "snug",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "4",
|
||||
"support_interface_bottom_layers": "4",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_base_pattern": "lightning",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_angle": "45",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_angle": "50",
|
||||
"tree_support_wall_count": "0",
|
||||
"tree_support_tip_diameter": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0",
|
||||
"initial_layer_speed": "15",
|
||||
"initial_layer_infill_speed": "20",
|
||||
"outer_wall_speed": "60",
|
||||
"inner_wall_speed": "80",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_extra_spacing": "200",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0"
|
||||
"skirt_loops": "1",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.01",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "snug",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "4",
|
||||
"support_interface_bottom_layers": "4",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_base_pattern": "lightning",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_angle": "45",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_angle": "50",
|
||||
"tree_support_wall_count": "0",
|
||||
"tree_support_tip_diameter": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0",
|
||||
"initial_layer_speed": "15",
|
||||
"initial_layer_infill_speed": "20",
|
||||
"outer_wall_speed": "60",
|
||||
"inner_wall_speed": "80",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_speed": "150",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_extra_spacing": "200",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user