mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-17 02:22:17 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,116 +1,116 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "TwoTrees SK1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "TwoTrees SK1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": "hardened_steel",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "256",
|
||||
"default_print_profile": "0.20mm Standard @SK1",
|
||||
"machine_start_gcode": [
|
||||
"M107 ; Turn off the fan\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nM104 S220 ; set extruder temp\nM140 S60 ; set bed temp\nM109 S220 ; wait for extruder temp\nM190 S60 ; wait for bed temp\nG1 E-1.5 F2100 ; retract\n\n;G32 ;Load bed mesh\nG28 ;home\nG29 ;bed leveling\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG0 Z2.0 F600;\nG0 X50 Y10 F12000;\n\nG92 E0.0 ; reset extruder distance position\nG0 Z0.4 F600;\nG1 X100.0 E10 F3000.0 ; intro line\nG92 E0.0 ; reset extruder distance position\nG1 X200.0 E15 F3000.0 ; intro line\nG92 E0.0 ; reset extruder distance position\nG0 Z0.8 F600;\nG1 X100.0 E15 F3000.0 ; intro line\n\nG1 Z0.4 F600 ;Wipe\nG0 Y12 F6000 ;Wipe\nG1 X100 F6000 ;Wipe\nG0 Y8 F12000 ;Wipe\nG1 X200 F6000 ;Wipe\nG1 X190 Y12 F6000 ;Wipe\nG1 X180 Y8 F6000 ;Wipe\nG1 X170 Y12 F6000 ;Wipe\nG1 X160 Y8 F6000 ;Wipe\nG1 X150 Y12 F6000 ;Wipe\n\n\n;G0 Z2.0 F600;\nG92 E0.0 ; reset extruder distance position\n\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=10000"
|
||||
],
|
||||
"machine_end_gcode": [
|
||||
"M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\n\nG92 E0.0 ; reset extruder distance position\nG1 E-1 F2100 ; retract\n\nG0 X50 Y250 F12000;\nM84 ; disable motors\n\nM107 ; turn off fan\n\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=4000"
|
||||
],
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"15000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"1",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"50",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"730",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"730",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"max_layer_height": "0.32",
|
||||
"min_layer_height": "0.08",
|
||||
"retract_before_wipe": "100%",
|
||||
"retract_length_toolchange": "10",
|
||||
"retraction_length": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"support_multi_bed_types": "1"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "TwoTrees SK1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "TwoTrees SK1",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": "hardened_steel",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "256",
|
||||
"default_print_profile": "0.20mm Standard @SK1",
|
||||
"machine_start_gcode": [
|
||||
"M107 ; Turn off the fan\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\n\nM104 S220 ; set extruder temp\nM140 S60 ; set bed temp\nM109 S220 ; wait for extruder temp\nM190 S60 ; wait for bed temp\nG1 E-1.5 F2100 ; retract\n\n;G32 ;Load bed mesh\nG28 ;home\nG29 ;bed leveling\n\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG0 Z2.0 F600;\nG0 X50 Y10 F12000;\n\nG92 E0.0 ; reset extruder distance position\nG0 Z0.4 F600;\nG1 X100.0 E10 F3000.0 ; intro line\nG92 E0.0 ; reset extruder distance position\nG1 X200.0 E15 F3000.0 ; intro line\nG92 E0.0 ; reset extruder distance position\nG0 Z0.8 F600;\nG1 X100.0 E15 F3000.0 ; intro line\n\nG1 Z0.4 F600 ;Wipe\nG0 Y12 F6000 ;Wipe\nG1 X100 F6000 ;Wipe\nG0 Y8 F12000 ;Wipe\nG1 X200 F6000 ;Wipe\nG1 X190 Y12 F6000 ;Wipe\nG1 X180 Y8 F6000 ;Wipe\nG1 X170 Y12 F6000 ;Wipe\nG1 X160 Y8 F6000 ;Wipe\nG1 X150 Y12 F6000 ;Wipe\n\n\n;G0 Z2.0 F600;\nG92 E0.0 ; reset extruder distance position\n\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=10000"
|
||||
],
|
||||
"machine_end_gcode": [
|
||||
"M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\n\nG92 E0.0 ; reset extruder distance position\nG1 E-1 F2100 ; retract\n\nG0 X50 Y250 F12000;\nM84 ; disable motors\n\nM107 ; turn off fan\n\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=4000"
|
||||
],
|
||||
"change_filament_gcode": "PAUSE",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"15000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"1",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"50",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"730",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"730",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"max_layer_height": "0.32",
|
||||
"min_layer_height": "0.08",
|
||||
"retract_before_wipe": "100%",
|
||||
"retract_length_toolchange": "10",
|
||||
"retraction_length": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"support_multi_bed_types": "1"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "TwoTrees SK1",
|
||||
"model_id": "TwoTrees_SK1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "TwoTreesDesign",
|
||||
"bed_model": "TwoTrees SK1_buildplate_model.stl",
|
||||
"bed_texture": "TwoTrees SK1_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "TwoTrees Generic 95A TPU @SK1;TwoTrees Generic PETG @SK1;TwoTrees Generic HS PLA @SK1;TwoTrees Generic PLA @SK1;TwoTrees Generic PLA-CF @SK1;TwoTrees Generic PLA Matte @SK1;TwoTrees Generic PLA Silk @SK1"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "TwoTrees SK1",
|
||||
"model_id": "TwoTrees_SK1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "TwoTreesDesign",
|
||||
"bed_model": "TwoTrees SK1_buildplate_model.stl",
|
||||
"bed_texture": "TwoTrees SK1_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "TwoTrees Generic 95A TPU @SK1;TwoTrees Generic PETG @SK1;TwoTrees Generic HS PLA @SK1;TwoTrees Generic PLA @SK1;TwoTrees Generic PLA-CF @SK1;TwoTrees Generic PLA Matte @SK1;TwoTrees Generic PLA Silk @SK1"
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "TwoTrees SP-5 Klipper 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM003",
|
||||
"instantiation": "true",
|
||||
"printer_model": "TwoTrees SP-5 Klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"310x0",
|
||||
"310x310",
|
||||
"0x310"
|
||||
],
|
||||
"printable_height": "350"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "TwoTrees SP-5 Klipper 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM003",
|
||||
"instantiation": "true",
|
||||
"printer_model": "TwoTrees SP-5 Klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"310x0",
|
||||
"310x310",
|
||||
"0x310"
|
||||
],
|
||||
"printable_height": "350"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "TwoTrees SP-5 Klipper",
|
||||
"model_id": "TwoTrees_SP-5_Klipper",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "TwoTreesDesign",
|
||||
"bed_model": "SP-5_bed.stl",
|
||||
"bed_texture": "SP-5_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "TwoTrees Generic ABS;TwoTrees Generic PLA;TwoTrees Generic PLA-CF;TwoTrees Generic PETG;TwoTrees Generic TPU;TwoTrees Generic ASA;TwoTrees Generic PC;TwoTrees Generic PVA;TwoTrees Generic PA;TwoTrees Generic PA-CF"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "TwoTrees SP-5 Klipper",
|
||||
"model_id": "TwoTrees_SP-5_Klipper",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "TwoTreesDesign",
|
||||
"bed_model": "SP-5_bed.stl",
|
||||
"bed_texture": "SP-5_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "TwoTrees Generic ABS;TwoTrees Generic PLA;TwoTrees Generic PLA-CF;TwoTrees Generic PETG;TwoTrees Generic TPU;TwoTrees Generic ASA;TwoTrees Generic PC;TwoTrees Generic PVA;TwoTrees Generic PA;TwoTrees Generic PA-CF"
|
||||
}
|
||||
|
||||
@@ -1,141 +1,141 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"use_firmware_retraction": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"extruder_clearance_radius": "50",
|
||||
"extruder_clearance_height_to_rod": "60",
|
||||
"extruder_clearance_height_to_lid": "350",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"TwoTrees Generic PLA"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"use_firmware_retraction": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"extruder_clearance_radius": "50",
|
||||
"extruder_clearance_height_to_rod": "60",
|
||||
"extruder_clearance_height_to_lid": "350",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "PAUSE\n",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"TwoTrees Generic PLA"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "END_PRINT",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,117 +1,117 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user