mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-21 04:13:50 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Sovol SV06 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Sovol SV06 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Sovol SV06Plus",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "340",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1500",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1500",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"140",
|
||||
"140"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"140",
|
||||
"140"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"10",
|
||||
"4.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.25"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printer_settings_id": "Sovol",
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
|
||||
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Sovol SV06 Plus 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Sovol SV06 Plus",
|
||||
"default_print_profile": "0.20mm Standard @Sovol SV06Plus",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "340",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1500",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1500",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"140",
|
||||
"140"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"140",
|
||||
"140"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"10",
|
||||
"4.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.25"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"printer_settings_id": "Sovol",
|
||||
"retraction_minimum_travel": [
|
||||
"0.5"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
|
||||
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user