juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-19 11:23:42 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reduce size by Json Fromatting (#13163)

Browse Source 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
2026-04-15 11:58:12 -03:00
committed by GitHub
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
resources/profiles/Sovol/machine/Sovol SV01 0.4 nozzle.json
View File

@@ -106,4 +106,4 @@
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}
}

216
resources/profiles/Sovol/machine/Sovol SV01 Pro 0.4 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Sovol SV01 Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV01 Pro",
"default_print_profile": "0.20mm Standard @Sovol SV01Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"280x0",
"280x240",
"0x240"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV01 Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV01 Pro",
"default_print_profile": "0.20mm Standard @Sovol SV01Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"280x0",
"280x240",
"0x240"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}

22
resources/profiles/Sovol/machine/Sovol SV01 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV01 Pro",
"model_id": "Sovol-SV01-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv01pro_buildplate_model.stl",
"bed_texture": "sovol_sv01pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}
"type": "machine_model",
"name": "Sovol SV01 Pro",
"model_id": "Sovol-SV01-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv01pro_buildplate_model.stl",
"bed_texture": "sovol_sv01pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

18
resources/profiles/Sovol/machine/Sovol SV01.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV01",
"model_id": "Sovol-SV01",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv01pro_buildplate_model.stl",
"bed_texture": "sovol_sv01pro_buildplate_texture.png",
"hotend_model": "",
"type": "machine_model",
"name": "Sovol SV01",
"model_id": "Sovol-SV01",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv01pro_buildplate_model.stl",
"bed_texture": "sovol_sv01pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

280
resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json
View File

@@ -1,141 +1,141 @@
{
"type": "machine",
"name": "Sovol SV02 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV02",
"default_print_profile": "0.20mm Standard @Sovol SV02",
"nozzle_diameter": [
"0.4",
"0.4"
],
"extruder_colour": [
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0"
],
"printable_area": [
"0x0",
"280x0",
"280x240",
"0x240"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"6",
"6"
],
"retract_length_toolchange": [
"1",
"1"
],
"retract_when_changing_layer": [
"1",
"1"
],
"retract_restart_extra": [
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0"
],
"deretraction_speed": [
"60",
"60"
],
"wipe": [
"1",
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV02 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV02",
"default_print_profile": "0.20mm Standard @Sovol SV02",
"nozzle_diameter": [
"0.4",
"0.4"
],
"extruder_colour": [
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0"
],
"printable_area": [
"0x0",
"280x0",
"280x240",
"0x240"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"6",
"6"
],
"retract_length_toolchange": [
"1",
"1"
],
"retract_when_changing_layer": [
"1",
"1"
],
"retract_restart_extra": [
"0",
"0"
],
"retract_restart_extra_toolchange": [
"0",
"0"
],
"deretraction_speed": [
"60",
"60"
],
"wipe": [
"1",
"1"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}

22
resources/profiles/Sovol/machine/Sovol SV02.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV02",
"model_id": "Sovol-SV02",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv02_buildplate_model.stl",
"bed_texture": "sovol_sv02_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}
"type": "machine_model",
"name": "Sovol SV02",
"model_id": "Sovol-SV02",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv02_buildplate_model.stl",
"bed_texture": "sovol_sv02_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

216
resources/profiles/Sovol/machine/Sovol SV05 0.4 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Sovol SV05 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV05",
"default_print_profile": "0.20mm Standard @Sovol SV05",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"5",
"5"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV05 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV05",
"default_print_profile": "0.20mm Standard @Sovol SV05",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"5",
"5"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"scan_first_layer": "0"
}

22
resources/profiles/Sovol/machine/Sovol SV05.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV05",
"model_id": "Sovol-SV05",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv05_buildplate_model.stl",
"bed_texture": "sovol_sv05_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}
"type": "machine_model",
"name": "Sovol SV05",
"model_id": "Sovol-SV05",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv05_buildplate_model.stl",
"bed_texture": "sovol_sv05_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

232
resources/profiles/Sovol/machine/Sovol SV06 0.4 High-Speed nozzle.json
View File

@@ -1,117 +1,117 @@
{
"type": "machine",
"name": "Sovol SV06 0.4 High-Speed nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06",
"default_print_profile": "0.20mm High-Speed @Sovol SV06",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.5"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"5000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"5000",
"5000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"35",
"35"
],
"deretraction_speed": [
"35",
"35"
],
"wipe_distance": [
"2",
"2"
],
"retract_length_toolchange": [
"1",
"1"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"5"
],
"machine_max_jerk_y": [
"5"
],
"machine_max_jerk_z": [
"0.4"
],
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X23.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\nG90 ; absolute positioning\nG1 X5 Y5 F3000\nG27 P2 ; park extruder\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\n",
"default_filament_profile": [
"Generic PLA @System"
]
}
"type": "machine",
"name": "Sovol SV06 0.4 High-Speed nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06",
"default_print_profile": "0.20mm High-Speed @Sovol SV06",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.5"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"5000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1500",
"1500"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"5000",
"5000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"35",
"35"
],
"deretraction_speed": [
"35",
"35"
],
"wipe_distance": [
"2",
"2"
],
"retract_length_toolchange": [
"1",
"1"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"5"
],
"machine_max_jerk_y": [
"5"
],
"machine_max_jerk_z": [
"0.4"
],
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X23.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\nG90 ; absolute positioning\nG1 X5 Y5 F3000\nG27 P2 ; park extruder\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\n",
"default_filament_profile": [
"Generic PLA @System"
]
}

226
resources/profiles/Sovol/machine/Sovol SV06 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Sovol SV06 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06",
"default_print_profile": "0.20mm Standard @Sovol SV06",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"960"
],
"machine_max_acceleration_y": [
"500",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"30",
"120"
],
"machine_max_speed_x": [
"80",
"100"
],
"machine_max_speed_y": [
"80",
"100"
],
"machine_max_speed_z": [
"10",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV06 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06",
"default_print_profile": "0.20mm Standard @Sovol SV06",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"500",
"960"
],
"machine_max_acceleration_y": [
"500",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"30",
"120"
],
"machine_max_speed_x": [
"80",
"100"
],
"machine_max_speed_y": [
"80",
"100"
],
"machine_max_speed_z": [
"10",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

260
resources/profiles/Sovol/machine/Sovol SV06 ACE 0.2 nozzle.json
View File

@@ -1,131 +1,131 @@
{
"type": "machine",
"name": "Sovol SV06 ACE 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.12mm Standard @Sovol SV06 ACE 0.2 nozzle",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.6"
],
"retraction_minimum_travel": [
"0.5"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.2"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.16",
"0.16"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"35",
"35"
],
"deretraction_speed": [
"35",
"35"
],
"wipe_distance": [
"1"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.200 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.100 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}
"type": "machine",
"name": "Sovol SV06 ACE 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.12mm Standard @Sovol SV06 ACE 0.2 nozzle",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.6"
],
"retraction_minimum_travel": [
"0.5"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.2"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.16",
"0.16"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"35",
"35"
],
"deretraction_speed": [
"35",
"35"
],
"wipe_distance": [
"1"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.200 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.100 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}

260
resources/profiles/Sovol/machine/Sovol SV06 ACE 0.4 nozzle.json
View File

@@ -1,131 +1,131 @@
{
"type": "machine",
"name": "Sovol SV06 ACE 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.20mm Standard @Sovol SV06 ACE",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"40",
"40"
],
"deretraction_speed": [
"40",
"40"
],
"wipe_distance": [
"2"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.400 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.200 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}
"type": "machine",
"name": "Sovol SV06 ACE 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.20mm Standard @Sovol SV06 ACE",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"40",
"40"
],
"deretraction_speed": [
"40",
"40"
],
"wipe_distance": [
"2"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.400 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.200 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}

260
resources/profiles/Sovol/machine/Sovol SV06 ACE 0.6 nozzle.json
View File

@@ -1,131 +1,131 @@
{
"type": "machine",
"name": "Sovol SV06 ACE 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.30mm Standard @Sovol SV06 ACE 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"1.0"
],
"retraction_minimum_travel": [
"1.5"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.6"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.48",
"0.48"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"45",
"45"
],
"deretraction_speed": [
"45",
"45"
],
"wipe_distance": [
"3"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.600 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.300 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}
"type": "machine",
"name": "Sovol SV06 ACE 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.30mm Standard @Sovol SV06 ACE 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"1.0"
],
"retraction_minimum_travel": [
"1.5"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.6"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.48",
"0.48"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"45",
"45"
],
"deretraction_speed": [
"45",
"45"
],
"wipe_distance": [
"3"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.600 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.300 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}

260
resources/profiles/Sovol/machine/Sovol SV06 ACE 0.8 nozzle.json
View File

@@ -1,131 +1,131 @@
{
"type": "machine",
"name": "Sovol SV06 ACE 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.40mm Standard @Sovol SV06 ACE 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"1.2"
],
"retraction_minimum_travel": [
"2"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"70",
"70"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.8"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.64",
"0.64"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"45",
"45"
],
"deretraction_speed": [
"45",
"45"
],
"wipe_distance": [
"4"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.800 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.300 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}
"type": "machine",
"name": "Sovol SV06 ACE 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 ACE",
"default_print_profile": "0.40mm Standard @Sovol SV06 ACE 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"1.2"
],
"retraction_minimum_travel": [
"2"
],
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_e": [
"70",
"70"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.8"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.64",
"0.64"
],
"retract_lift_below": [
"248",
"248"
],
"retraction_speed": [
"45",
"45"
],
"deretraction_speed": [
"45",
"45"
],
"wipe_distance": [
"4"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 F6000\nG1 Y20\nG1 Z0.800 F600\nG1 Y-4 F6000\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.300 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-4.800 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 ACE PLA"
]
}

22
resources/profiles/Sovol/machine/Sovol SV06 ACE.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV06 ACE",
"model_id": "Sovol-SV06-ACE",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06_ace_buildplate_model.stl",
"bed_texture": "sovol_sv06_ace_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV06 ACE PLA"
}
"type": "machine_model",
"name": "Sovol SV06 ACE",
"model_id": "Sovol-SV06-ACE",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06_ace_buildplate_model.stl",
"bed_texture": "sovol_sv06_ace_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV06 ACE PLA"
}

226
resources/profiles/Sovol/machine/Sovol SV06 Plus 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Sovol SV06 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 Plus",
"default_print_profile": "0.20mm Standard @Sovol SV06Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "340",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"1500",
"960"
],
"machine_max_acceleration_y": [
"1500",
"960"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"140",
"140"
],
"machine_max_speed_y": [
"140",
"140"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"10",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"2",
"0.4"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"0.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV06 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 Plus",
"default_print_profile": "0.20mm Standard @Sovol SV06Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "340",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"1500",
"960"
],
"machine_max_acceleration_y": [
"1500",
"960"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"140",
"140"
],
"machine_max_speed_y": [
"140",
"140"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"10",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"2",
"0.4"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"retraction_minimum_travel": [
"0.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "G90 ; use absoulte coordinates\nM83 ; extruder relative mode\n\nM104 S150 ; set nozzle temp to 150\n\nG28 ; home all axes\nM420 S1 ;load mesh\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM104 S[nozzle_temperature_initial_layer] ; set final extruder temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\n\nG1 X0.1 Y10 Z5.0 F1500 ; move to start position\nG1 Z0.26 F150 ; Move lower\nG4 S0.5 ; wait 0.5 seconds\n\nG1 X0.1 Y150 Z0.3 F1500 E10 ; prime the nozzle\nG1 X0.3 F1500\nG1 X0.4 Y15 Z0.3 F1500 E15 ; prime the nozzle\nG4 S0.1 ; wait 0.1 seconds\n\nG1 Z0.6 F150 ; lift nozzle\nG92 E0 ; Reset Extruder\nG1 Z2 F150 ; lift nozzle more\n",
"machine_end_gcode": "M117 READY\n\nG1 E0 F1000 ; reset extruder\n\nG91 ; relative positioning\nG1 Z2 F1000 ; lift nozzle\n\nG90 ; absolute positioning\nG27 P2 ; park extruder\n\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

256
resources/profiles/Sovol/machine/Sovol SV06 Plus ACE 0.4 nozzle.json
View File

@@ -1,129 +1,129 @@
{
"type": "machine",
"name": "Sovol SV06 Plus ACE 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 Plus ACE",
"default_print_profile": "0.20mm Standard @Sovol SV06 Plus ACE",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"343",
"343"
],
"retraction_speed": [
"40",
"40"
],
"deretraction_speed": [
"40",
"40"
],
"wipe_distance": [
"2"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG28\nG90\nG1 X0 F6000\nG1 Y-4\nG1 Z0.200 F600\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.200 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-5 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 Plus ACE PLA"
]
}
"type": "machine",
"name": "Sovol SV06 Plus ACE 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV06 Plus ACE",
"default_print_profile": "0.20mm Standard @Sovol SV06 Plus ACE",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"thumbnails": [
"96x96",
"160x160"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_z": [
"10",
"10"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"max_layer_height": [
"0.32",
"0.32"
],
"retract_lift_below": [
"343",
"343"
],
"retraction_speed": [
"40",
"40"
],
"deretraction_speed": [
"40",
"40"
],
"wipe_distance": [
"2"
],
"retract_before_wipe": [
"100%"
],
"retract_length_toolchange": [
"2",
"2"
],
"machine_max_jerk_e": [
"2.5"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.5"
],
"gcode_flavor": "klipper",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"change_filament_gcode": "M600",
"manual_filament_change": "1",
"machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG28\nG90\nG1 X0 F6000\nG1 Y-4\nG1 Z0.200 F600\nM400\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG91\nM83\nG1 E-0.200 Z5 F600\nG1 X{print_bed_max[1] / 3} F6000\nG1 Z-5 F600\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 Y1 E0.16 F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 X-{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 Y1 E0.24 F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.24} F3000\nG1 X{print_bed_max[1] / 6} E{print_bed_max[1] / 6 * 0.16} F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV06 Plus ACE PLA"
]
}

22
resources/profiles/Sovol/machine/Sovol SV06 Plus ACE.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV06 Plus ACE",
"model_id": "Sovol-SV06-Plus-ACE",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06plus_ace_buildplate_model.stl",
"bed_texture": "sovol_sv06plus_ace_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV06 Plus ACE PLA"
}
"type": "machine_model",
"name": "Sovol SV06 Plus ACE",
"model_id": "Sovol-SV06-Plus-ACE",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06plus_ace_buildplate_model.stl",
"bed_texture": "sovol_sv06plus_ace_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV06 Plus ACE PLA"
}

22
resources/profiles/Sovol/machine/Sovol SV06 Plus.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV06 Plus",
"model_id": "Sovol-SV06-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06plus_buildplate_model.stl",
"bed_texture": "sovol_sv06plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}
"type": "machine_model",
"name": "Sovol SV06 Plus",
"model_id": "Sovol-SV06-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06plus_buildplate_model.stl",
"bed_texture": "sovol_sv06plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

22
resources/profiles/Sovol/machine/Sovol SV06.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV06",
"model_id": "Sovol-SV06",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06_buildplate_model.stl",
"bed_texture": "sovol_sv06_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic ASA @System;Generic TPU @System;"
}
"type": "machine_model",
"name": "Sovol SV06",
"model_id": "Sovol-SV06",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv06_buildplate_model.stl",
"bed_texture": "sovol_sv06_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic ASA @System;Generic TPU @System;"
}

174
resources/profiles/Sovol/machine/Sovol SV07 0.4 nozzle.json
View File

@@ -1,88 +1,88 @@
{
"type": "machine",
"name": "Sovol SV07 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV07",
"default_print_profile": "0.20mm Standard @Sovol SV07",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_x": [
"12000"
],
"machine_max_acceleration_y": [
"12000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_z": [
"20"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.25"
],
"machine_max_jerk_e": [
"3"
],
"z_hop": [
"0.4"
],
"max_layer_height": [
"0.32"
],
"retract_lift_below": [
"348"
],
"retraction_speed": [
"50"
],
"deretraction_speed": [
"50"
],
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20 F9000\nG1 Z0.300 F600\nG1 Y0 F9000\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F480\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X55.000 Y0.000 F6000\nG1 Z-4.800 F600\nG1 X55.000 E13.2 F3000\nG1 X55.000 E8.8 F3000\nG1 Y1 E0.16 F3000\nG1 X-55.000 E8.8 F3000\nG1 X-55.000 E13.2 F3000\nG1 Y1 E0.24 F3000\nG1 X55.000 E13.2 F3000\nG1 X55.000 E8.8 F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE"
}
"type": "machine",
"name": "Sovol SV07 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV07",
"default_print_profile": "0.20mm Standard @Sovol SV07",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"300x300"
],
"thumbnails_format": "PNG",
"retraction_length": [
"0.8"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_x": [
"12000"
],
"machine_max_acceleration_y": [
"12000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_z": [
"20"
],
"machine_max_jerk_x": [
"9"
],
"machine_max_jerk_y": [
"9"
],
"machine_max_jerk_z": [
"0.25"
],
"machine_max_jerk_e": [
"3"
],
"z_hop": [
"0.4"
],
"max_layer_height": [
"0.32"
],
"retract_lift_below": [
"348"
],
"retraction_speed": [
"50"
],
"deretraction_speed": [
"50"
],
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20 F9000\nG1 Z0.300 F600\nG1 Y0 F9000\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F480\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X55.000 Y0.000 F6000\nG1 Z-4.800 F600\nG1 X55.000 E13.2 F3000\nG1 X55.000 E8.8 F3000\nG1 Y1 E0.16 F3000\nG1 X-55.000 E8.8 F3000\nG1 X-55.000 E13.2 F3000\nG1 Y1 E0.24 F3000\nG1 X55.000 E13.2 F3000\nG1 X55.000 E8.8 F3000\nG1 E-0.200 Z1 F600\nM400\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE"
}

254
resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json
View File

@@ -1,128 +1,128 @@
{
"type": "machine",
"name": "Sovol SV07 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV07 Plus",
"default_print_profile": "0.20mm Standard @Sovol SV07 Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"4000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"8000",
"960"
],
"machine_max_acceleration_y": [
"8000",
"960"
],
"machine_max_acceleration_z": [
"400",
"200"
],
"machine_max_jerk_e": [
"15",
"4.5"
],
"machine_max_jerk_x": [
"27",
"8"
],
"machine_max_jerk_y": [
"27",
"8"
],
"machine_max_jerk_z": [
"3.6",
"0.4"
],
"machine_max_speed_e": [
"500",
"120"
],
"machine_max_speed_x": [
"500",
"100"
],
"machine_max_speed_y": [
"500",
"100"
],
"machine_max_speed_z": [
"500",
"12"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"use_relative_e_distances": "0",
"gcode_flavor": "klipper",
"fan_kickstart": "0.2",
"fan_speedup_overhangs": "0",
"fan_speedup_time": "0.5",
"retraction_minimum_travel": [
"0.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"140"
],
"deretraction_speed": [
"140"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single] ; Setting bed temprature\nM109 S[nozzle_temperature_initial_layer] ; Setting hot-end temprature\nSTART_PRINT ; Running macro from klipper\n",
"machine_end_gcode": "END_PRINT",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Sovol SV07 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV07 Plus",
"default_print_profile": "0.20mm Standard @Sovol SV07 Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"4000",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"8000",
"960"
],
"machine_max_acceleration_y": [
"8000",
"960"
],
"machine_max_acceleration_z": [
"400",
"200"
],
"machine_max_jerk_e": [
"15",
"4.5"
],
"machine_max_jerk_x": [
"27",
"8"
],
"machine_max_jerk_y": [
"27",
"8"
],
"machine_max_jerk_z": [
"3.6",
"0.4"
],
"machine_max_speed_e": [
"500",
"120"
],
"machine_max_speed_x": [
"500",
"100"
],
"machine_max_speed_y": [
"500",
"100"
],
"machine_max_speed_z": [
"500",
"12"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.25"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Sovol",
"use_relative_e_distances": "0",
"gcode_flavor": "klipper",
"fan_kickstart": "0.2",
"fan_speedup_overhangs": "0",
"fan_speedup_time": "0.5",
"retraction_minimum_travel": [
"0.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"0.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"140"
],
"deretraction_speed": [
"140"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600\nG1 E0.4 F1500 ; prime after color change",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Generic PLA @System"
],
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single] ; Setting bed temprature\nM109 S[nozzle_temperature_initial_layer] ; Setting hot-end temprature\nSTART_PRINT ; Running macro from klipper\n",
"machine_end_gcode": "END_PRINT",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Sovol/machine/Sovol SV07 Plus.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV07 Plus",
"model_id": "Sovol-SV07Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv07plus_buildplate_model.stl",
"bed_texture": "sovol_sv07plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}
"type": "machine_model",
"name": "Sovol SV07 Plus",
"model_id": "Sovol-SV07Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv07plus_buildplate_model.stl",
"bed_texture": "sovol_sv07plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System"
}

22
resources/profiles/Sovol/machine/Sovol SV07.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV07",
"model_id": "Sovol-SV07",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv07_buildplate_model.stl",
"bed_texture": "sovol_sv07_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV07 PLA"
}
"type": "machine_model",
"name": "Sovol SV07",
"model_id": "Sovol-SV07",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv07_buildplate_model.stl",
"bed_texture": "sovol_sv07_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV07 PLA"
}

224
resources/profiles/Sovol/machine/Sovol SV08 0.2 nozzle.json
View File

@@ -1,113 +1,113 @@
{
"type": "machine",
"name": "Sovol SV08 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.10mm Standard @Sovol SV08 0.2 nozzle",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"min_layer_height": [
"0.04"
],
"max_layer_height": [
"0.14"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA @SV08 0.2 nozzle"
]
}
"type": "machine",
"name": "Sovol SV08 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.10mm Standard @Sovol SV08 0.2 nozzle",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"min_layer_height": [
"0.04"
],
"max_layer_height": [
"0.14"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA @SV08 0.2 nozzle"
]
}

212
resources/profiles/Sovol/machine/Sovol SV08 0.4 nozzle.json
View File

@@ -1,107 +1,107 @@
{
"type": "machine",
"name": "Sovol SV08 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.20mm Standard @Sovol SV08",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}
"type": "machine",
"name": "Sovol SV08 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.20mm Standard @Sovol SV08",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}

224
resources/profiles/Sovol/machine/Sovol SV08 0.6 nozzle.json
View File

@@ -1,113 +1,113 @@
{
"type": "machine",
"name": "Sovol SV08 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.30mm Standard @Sovol SV08 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"min_layer_height": [
"0.12"
],
"max_layer_height": [
"0.42"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}
"type": "machine",
"name": "Sovol SV08 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.30mm Standard @Sovol SV08 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"min_layer_height": [
"0.12"
],
"max_layer_height": [
"0.42"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}

224
resources/profiles/Sovol/machine/Sovol SV08 0.8 nozzle.json
View File

@@ -1,113 +1,113 @@
{
"type": "machine",
"name": "Sovol SV08 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.20mm Standard @Sovol SV08 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"min_layer_height": [
"0.16"
],
"max_layer_height": [
"0.56"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}
"type": "machine",
"name": "Sovol SV08 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Sovol SV08",
"default_print_profile": "0.20mm Standard @Sovol SV08 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"min_layer_height": [
"0.16"
],
"max_layer_height": [
"0.56"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"350x0",
"350x350",
"0x350"
],
"printable_height": "345",
"gcode_flavor": "klipper",
"retraction_length": [
"0.5"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"700"
],
"machine_max_speed_y": [
"700"
],
"machine_max_speed_z": [
"20"
],
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"20000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"0.5"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"retraction_minimum_travel": [
"1"
],
"retract_length_toolchange": [
"2"
],
"wipe_distance": [
"2"
],
"thumbnails": [
"300x300",
"400x300",
"32x32"
],
"retract_lift_below": [
"343"
],
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
"machine_start_gcode": "G28\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nSTART_PRINT\nG90\nG1 X0 F9000\nG1 Y20\nG1 Z0.600 F600\nG1 Y0 F9000\nM400\nG91\nM83\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\nG1 E25 F300\nG4 P1000\nG1 E-0.200 Z5 F600\nG1 X88.000 F9000\nG1 Z-5.000 F600\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 Y1 E0.16 F1800\nG1 X-87.000 E13.92 F1800\nG1 X-87.000 E20.88 F1800\nG1 Y1 E0.24 F1800\nG1 X87.000 E20.88 F1800\nG1 X87.000 E13.92 F1800\nG1 E-0.200 Z1 F600\nM400\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Sovol SV08 PLA"
]
}

236
resources/profiles/Sovol/machine/Sovol SV08 MAX 0.4 nozzle.json
View File

@@ -1,120 +1,120 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": [
"100%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"0.8"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"travel_slope": [
"2"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.4 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": [
"100%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"0.8"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"travel_slope": [
"2"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
}

248
resources/profiles/Sovol/machine/Sovol SV08 MAX 0.6 nozzle.json
View File

@@ -1,126 +1,126 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.6 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.30mm Standard @Sovol SV08 MAX 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"min_layer_height": [
"0.12"
],
"max_layer_height": [
"0.42"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"1.8"
],
"retract_restart_extra": [
"0.1"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"3"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.6 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.30mm Standard @Sovol SV08 MAX 0.6 nozzle",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"min_layer_height": [
"0.12"
],
"max_layer_height": [
"0.42"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"1.8"
],
"retract_restart_extra": [
"0.1"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"3"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
}

248
resources/profiles/Sovol/machine/Sovol SV08 MAX 0.8 nozzle.json
View File

@@ -1,126 +1,126 @@
{
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.8 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"min_layer_height": [
"0.16"
],
"max_layer_height": [
"0.56"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"3.0"
],
"retract_restart_extra": [
"0.1"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
"type": "machine",
"setting_id": "GM001",
"name": "Sovol SV08 MAX 0.8 nozzle",
"from": "system",
"instantiation": "true",
"inherits": "fdm_machine_common",
"printer_model": "Sovol SV08 MAX",
"default_print_profile": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"min_layer_height": [
"0.16"
],
"max_layer_height": [
"0.56"
],
"retract_before_wipe": [
"0%"
],
"printable_area": [
"0x0",
"500x0",
"500x500",
"0x500"
],
"printable_height": "500",
"printer_structure": "corexy",
"gcode_flavor": "klipper",
"retraction_length": [
"3.0"
],
"retract_restart_extra": [
"0.1"
],
"machine_max_speed_e": [
"50"
],
"machine_max_speed_x": [
"800"
],
"machine_max_speed_y": [
"800"
],
"machine_max_speed_z": [
"10"
],
"machine_max_acceleration_e": [
"20000"
],
"machine_max_acceleration_extruding": [
"40000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"40000"
],
"machine_max_acceleration_x": [
"40000"
],
"machine_max_acceleration_y": [
"40000"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"20"
],
"machine_max_jerk_y": [
"20"
],
"machine_max_jerk_z": [
"2.5"
],
"z_hop": [
"0.6"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"retraction_minimum_travel": [
"0"
],
"retract_length_toolchange": [
"2"
],
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"32x32",
"64x64",
"160x160",
"256x256"
],
"retract_lift_below": [
"498"
],
"auxiliary_fan": "0",
"thumbnails_format": "PNG",
"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n",
"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nSTART_PRINT\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[0] - 3 > print_bed_min[0]}\nG90\nM83\nG1 E-0.100 F600\nG1 X{first_layer_print_min[0] - 3} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\nG1 Z1 F600\nG1 X{first_layer_print_min[0] - 2} Y{first_layer_print_min[1]} F12000\nG1 Z0.3 F600 ;Move to start position\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 F600\n{else}\nG90\nM83\nG1 E-0.100 Z3 F600\nG1 X-1.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 X-0.5 Y{first_layer_print_min[1]} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Z0.3 F600\nG1 E0.100 F600\nG1 Y{first_layer_print_min[1] + 5 * 6} E{5 * 0.24 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 Y{first_layer_print_min[1] + 5 * 6 * 2} E{5 * 0.16 * 6} F{outer_wall_volumetric_speed * 5 * 30}\nG1 E-0.100 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n",
"machine_end_gcode": "END_PRINT\n",
"machine_pause_gcode": "PAUSE\n",
"change_filament_gcode": "M600\n",
"default_filament_profile": [
"Generic PLA @Sovol SV08 MAX"
]
}

20
resources/profiles/Sovol/machine/Sovol SV08 MAX.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV08 MAX",
"model_id": "Sovol-SV08 MAX",
"nozzle_diameter": "0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv08_max_buildplate_model.stl",
"bed_texture": "sovol_sv08_max_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA;Generic PLA Silk;Generic ABS;Generic PETG;Polymaker PETG;SUNLU PETG;Generic TPU;Generic PC"
"type": "machine_model",
"name": "Sovol SV08 MAX",
"model_id": "Sovol-SV08 MAX",
"nozzle_diameter": "0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv08_max_buildplate_model.stl",
"bed_texture": "sovol_sv08_max_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA;Generic PLA Silk;Generic ABS;Generic PETG;Polymaker PETG;SUNLU PETG;Generic TPU;Generic PC"
}

22
resources/profiles/Sovol/machine/Sovol SV08.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol SV08",
"model_id": "Sovol-SV08",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv08_buildplate_model.stl",
"bed_texture": "sovol_sv08_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV08 PLA;Sovol SV08 PLA @SV08 0.2 nozzle;Sovol SV08 ABS;Sovol SV08 PETG;Sovol SV08 TPU"
}
"type": "machine_model",
"name": "Sovol SV08",
"model_id": "Sovol-SV08",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_sv08_buildplate_model.stl",
"bed_texture": "sovol_sv08_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol SV08 PLA;Sovol SV08 PLA @SV08 0.2 nozzle;Sovol SV08 ABS;Sovol SV08 PETG;Sovol SV08 TPU"
}

222
resources/profiles/Sovol/machine/Sovol Zero 0.4 nozzle.json
View File

File diff suppressed because one or more lines are too long

22
resources/profiles/Sovol/machine/Sovol Zero.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Sovol Zero",
"model_id": "Sovol-Zero",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_zero_buildplate_model.stl",
"bed_texture": "sovol_zero_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol Zero PLA Basic;Sovol Zero PLA Basic HS Nozzle;Sovol Zero PLA Silk;Sovol Zero PLA Silk HS Nozzle;Sovol Zero ABS;Sovol Zero PETG;Sovol Zero PETG HS Nozzle;Sovol Zero TPU;Sovol Zero PC"
}
"type": "machine_model",
"name": "Sovol Zero",
"model_id": "Sovol-Zero",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Sovol",
"bed_model": "sovol_zero_buildplate_model.stl",
"bed_texture": "sovol_zero_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Sovol Zero PLA Basic;Sovol Zero PLA Basic HS Nozzle;Sovol Zero PLA Silk;Sovol Zero PLA Silk HS Nozzle;Sovol Zero ABS;Sovol Zero PETG;Sovol Zero PETG HS Nozzle;Sovol Zero TPU;Sovol Zero PC"
}

242
resources/profiles/Sovol/machine/fdm_machine_common.json
View File

@@ -1,122 +1,122 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"500"
],
"machine_max_acceleration_y": [
"500"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"retract_lift_below": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"z_hop_types": "Normal Lift",
"default_print_profile": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "G90\nG1 X0 Y0 F8000\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n\nSTART_PRINT\n\nM400\nG90\nM83\nG1 Z0.500 F1200\nG1 E10\nG1 E-0.200 Z5 F1200\nG1 X78.000 Y0.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.200 Z1\nM400\n\nG90\nM83\nG1 X78.000 Y1.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.500 Z1\nM400\n\n",
"machine_end_gcode": ""
}
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"500"
],
"machine_max_acceleration_y": [
"500"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"retract_lift_below": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"z_hop_types": "Normal Lift",
"default_print_profile": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "G90\nG1 X0 Y0 F8000\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n\nSTART_PRINT\n\nM400\nG90\nM83\nG1 Z0.500 F1200\nG1 E10\nG1 E-0.200 Z5 F1200\nG1 X78.000 Y0.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.200 Z1\nM400\n\nG90\nM83\nG1 X78.000 Y1.000 F8000\nG1 Z0.300 F1200\nG1 X128.000 E12 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 30}\nG1 X178.000 E8 F{outer_wall_volumetric_speed * 1.0 /(0.3*0.5) * 60}\nG1 X188.000 E-0.500 Z1\nM400\n\n",
"machine_end_gcode": ""
}