mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 11:02:08 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,44 +1,70 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP025",
|
||||
"name": "0.08mm Extra Fine @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["4000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": ["70"],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": ["40"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"inner_wall_speed": ["150"],
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.08",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": ["2000"],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"outer_wall_speed": ["60"],
|
||||
"overhang_1_4_speed": ["0"],
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.08",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["500"],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": ["Qidi X-Max 4 0.2 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP025",
|
||||
"name": "0.08mm Extra Fine @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": [
|
||||
"70"
|
||||
],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": [
|
||||
"40"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.08",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0"
|
||||
],
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.08",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,70 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.08mm Extra Fine @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "7",
|
||||
"bottom_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["350"],
|
||||
"initial_layer_infill_speed": ["105"],
|
||||
"initial_layer_speed": ["50"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_speed": ["350"],
|
||||
"internal_solid_infill_speed": ["350"],
|
||||
"ironing_flow": "8%",
|
||||
"layer_height": "0.08",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_speed": ["200"],
|
||||
"overhang_1_4_speed": ["60"],
|
||||
"overhang_2_4_speed": ["30"],
|
||||
"overhang_3_4_speed": ["10"],
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": ["450"],
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"top_color_penetration_layers": "9",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "1",
|
||||
"top_surface_speed": ["200"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.08mm Extra Fine @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "7",
|
||||
"bottom_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350"
|
||||
],
|
||||
"ironing_flow": "8%",
|
||||
"layer_height": "0.08",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"450"
|
||||
],
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"top_color_penetration_layers": "9",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "1",
|
||||
"top_surface_speed": [
|
||||
"200"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,61 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP007",
|
||||
"name": "0.10mm Standard @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": ["70"],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": ["40"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["500"],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": ["Qidi X-Max 4 0.2 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP007",
|
||||
"name": "0.10mm Standard @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": [
|
||||
"70"
|
||||
],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": [
|
||||
"40"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.1",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,42 +1,64 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP026",
|
||||
"name": "0.12mm Balanced Quality @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": ["70"],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": ["40"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.12",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"overhang_1_4_speed": ["0"],
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["500"],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": ["Qidi X-Max 4 0.2 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP026",
|
||||
"name": "0.12mm Balanced Quality @X-Max 4 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_infill_speed": [
|
||||
"70"
|
||||
],
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": [
|
||||
"40"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"layer_height": "0.12",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_line_width": "0.22",
|
||||
"overhang_1_4_speed": [
|
||||
"0"
|
||||
],
|
||||
"skin_infill_line_width": "0.22",
|
||||
"skeleton_infill_line_width": "0.22",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_line_width": "0.22",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "7",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q1 Pro",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q1 Pro",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q2",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q2",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q2C",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi Q2C",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,93 +1,93 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.42",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "350",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"sparse_infill_speed": "430",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.42",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "350",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"sparse_infill_speed": "430",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6"
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XMax3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XMax3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.12",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus4",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XPlus4",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XSmart3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Qidi XSmart3",
|
||||
"inherits": "0.12mm Fine @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,70 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.12mm Fine @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["350"],
|
||||
"initial_layer_infill_speed": ["105"],
|
||||
"initial_layer_speed": ["50"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_speed": ["350"],
|
||||
"internal_solid_infill_speed": ["350"],
|
||||
"layer_height": "0.12",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_speed": ["200"],
|
||||
"overhang_1_4_speed": ["60"],
|
||||
"overhang_2_4_speed": ["30"],
|
||||
"overhang_3_4_speed": ["10"],
|
||||
"small_perimeter_threshold": ["50"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": ["430"],
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "8",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": ["200"],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.12mm Fine @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "5",
|
||||
"bottom_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350"
|
||||
],
|
||||
"layer_height": "0.12",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"50"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"430"
|
||||
],
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "8",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": [
|
||||
"200"
|
||||
],
|
||||
"wall_loops": "4",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q1 Pro 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q2 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi Q2C 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XMax3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XPlus3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XPlus4 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,61 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Balanced Quality @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "4",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["4000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["250"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"internal_solid_infill_speed": ["200"],
|
||||
"layer_height": "0.16",
|
||||
"outer_wall_acceleration": ["2000"],
|
||||
"outer_wall_speed": ["60"],
|
||||
"overhang_1_4_speed": ["60"],
|
||||
"overhang_2_4_speed": ["30"],
|
||||
"overhang_3_4_speed": ["10"],
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": ["200"],
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"top_color_penetration_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"top_surface_speed": ["150"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Balanced Quality @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "4",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"layer_height": "0.16",
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"top_color_penetration_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q1 Pro",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q1 Pro",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q2",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q2",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q2C",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi Q2C",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,95 +1,95 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.42",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"brim_object_gap": "0.1",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"seam_gap": "15%",
|
||||
"sparse_infill_speed": "330",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1",
|
||||
"wall_generator": "classic"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.42",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"brim_object_gap": "0.1",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"seam_gap": "15%",
|
||||
"sparse_infill_speed": "330",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1",
|
||||
"wall_generator": "classic"
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XMax3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XMax3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.16",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.16",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus4",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XPlus4",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XSmart3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Qidi XSmart3",
|
||||
"inherits": "0.16mm Optimal @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,63 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Standard @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "4",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["300"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_speed": ["300"],
|
||||
"internal_solid_infill_speed": ["300"],
|
||||
"layer_height": "0.16",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_speed": ["200"],
|
||||
"overhang_1_4_speed": ["60"],
|
||||
"overhang_2_4_speed": ["30"],
|
||||
"overhang_3_4_speed": ["10"],
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": ["330"],
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"top_color_penetration_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"travel_speed": ["500"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Standard @X-Max 4",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bottom_color_penetration_layers": "4",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"300"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"300"
|
||||
],
|
||||
"layer_height": "0.16",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"330"
|
||||
],
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"top_color_penetration_layers": "6",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,77 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP028",
|
||||
"name": "0.18mm Balanced Quality @X-Max 4 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": ["30"],
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["50"],
|
||||
"initial_layer_infill_speed": ["55"],
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": ["35"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": ["150"],
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": ["150"],
|
||||
"layer_height": "0.18",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_line_width": "0.62",
|
||||
"outer_wall_speed": ["120"],
|
||||
"overhang_1_4_speed": ["0"],
|
||||
"overhang_2_4_speed": ["15"],
|
||||
"skin_infill_line_width": "0.62",
|
||||
"skeleton_infill_line_width": "0.62",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_bottom_z_distance": "0.18",
|
||||
"support_line_width": "0.62",
|
||||
"support_top_z_distance": "0.18",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["500"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.6 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP028",
|
||||
"name": "0.18mm Balanced Quality @X-Max 4 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": [
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55"
|
||||
],
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": [
|
||||
"35"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"layer_height": "0.18",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_line_width": "0.62",
|
||||
"outer_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"15"
|
||||
],
|
||||
"skin_infill_line_width": "0.62",
|
||||
"skeleton_infill_line_width": "0.62",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_bottom_z_distance": "0.18",
|
||||
"support_line_width": "0.62",
|
||||
"support_top_z_distance": "0.18",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q1 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q1 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q2 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q2 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q2C 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi Q2C 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XMax3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XMax3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XPlus3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XPlus3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XPlus4 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XPlus4 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XSmart3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @Qidi XSmart3 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,57 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Balanced Strength @X-Max 4",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["250"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_speed": ["300"],
|
||||
"internal_solid_infill_speed": ["250"],
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_speed": ["60"],
|
||||
"overhang_2_4_speed": ["50"],
|
||||
"overhang_3_4_speed": ["10"],
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": ["270"],
|
||||
"sparse_infill_density": "15%",
|
||||
"top_color_penetration_layers": "5",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"top_surface_speed": ["200"],
|
||||
"wall_loops": "2",
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Balanced Strength @X-Max 4",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"270"
|
||||
],
|
||||
"sparse_infill_density": "15%",
|
||||
"top_color_penetration_layers": "5",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"top_surface_speed": [
|
||||
"200"
|
||||
],
|
||||
"wall_loops": "2",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q1 Pro",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q1 Pro",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q2",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q2",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q2C",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi Q2C",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.2",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "300",
|
||||
"sparse_infill_speed": "270",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "200",
|
||||
"gap_infill_speed": "250"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.2",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "300",
|
||||
"sparse_infill_speed": "270",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"top_surface_speed": "200",
|
||||
"gap_infill_speed": "250"
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XCFPro",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "25",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "25",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "25",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "25",
|
||||
"gap_infill_speed": "25",
|
||||
"sparse_infill_speed": "50",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-CF Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XMax",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XMax3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XMax3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus",
|
||||
"inherits": "fdm_process_qidi_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"layer_height": "0.2",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "0",
|
||||
"brim_object_gap": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "500",
|
||||
"default_jerk": "8",
|
||||
"top_surface_acceleration": "0",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_acceleration": "500",
|
||||
"travel_acceleration": "0",
|
||||
"inner_wall_acceleration": "500",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "20",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"minimum_sparse_infill_area": "10",
|
||||
"internal_solid_infill_line_width": "0",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "100%",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "30",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "1",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.4",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_jerk": "8",
|
||||
"initial_layer_speed": "20",
|
||||
"initial_layer_jerk": "8",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "30",
|
||||
"outer_wall_jerk": "8",
|
||||
"inner_wall_speed": "30",
|
||||
"inner_wall_jerk": "8",
|
||||
"internal_solid_infill_speed": "60",
|
||||
"infill_jerk": "8",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"sparse_infill_speed": "60",
|
||||
"travel_jerk": "8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus4",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XPlus4",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XSmart3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Qidi XSmart3",
|
||||
"inherits": "0.20mm Standard @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,48 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Standard @X-Max 4",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"instantiation": "true",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["250"],
|
||||
"inner_wall_speed": ["300"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"internal_solid_infill_speed": ["250"],
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_speed": ["200"],
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": ["270"],
|
||||
"top_color_penetration_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1.0",
|
||||
"travel_speed": ["500"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.4 nozzle"]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Standard @X-Max 4",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"instantiation": "true",
|
||||
"bridge_flow": "1",
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"270"
|
||||
],
|
||||
"top_color_penetration_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1.0",
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,42 +1,76 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP032",
|
||||
"name": "0.24mm Balanced Quality @X-Max 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": ["30"],
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["50"],
|
||||
"initial_layer_infill_speed": ["55"],
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"initial_layer_speed": ["35"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.82",
|
||||
"inner_wall_speed": ["150"],
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": ["150"],
|
||||
"layer_height": "0.24",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_line_width": "0.82",
|
||||
"outer_wall_speed": ["120"],
|
||||
"overhang_3_4_speed": ["25"],
|
||||
"overhang_4_4_speed": ["5"],
|
||||
"skin_infill_line_width": "0.82",
|
||||
"skeleton_infill_line_width": "0.82",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["1000"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.8 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP032",
|
||||
"name": "0.24mm Balanced Quality @X-Max 4 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": [
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55"
|
||||
],
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"initial_layer_speed": [
|
||||
"35"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.82",
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"layer_height": "0.24",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_line_width": "0.82",
|
||||
"outer_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"25"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"5"
|
||||
],
|
||||
"skin_infill_line_width": "0.82",
|
||||
"skeleton_infill_line_width": "0.82",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,40 +1,72 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP029",
|
||||
"name": "0.24mm Balanced Strength @X-Max 4 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": ["30"],
|
||||
"default_acceleration": ["10000"],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": ["50"],
|
||||
"initial_layer_infill_speed": ["55"],
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": ["35"],
|
||||
"inner_wall_acceleration": ["5000"],
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": ["150"],
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": ["150"],
|
||||
"layer_height": "0.24",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": ["3000"],
|
||||
"outer_wall_line_width": "0.62",
|
||||
"outer_wall_speed": ["120"],
|
||||
"overhang_3_4_speed": ["15"],
|
||||
"skin_infill_line_width": "0.62",
|
||||
"skeleton_infill_line_width": "0.62",
|
||||
"small_perimeter_threshold": ["4"],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": ["100"],
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": ["150"],
|
||||
"travel_speed": ["500"],
|
||||
"compatible_printers": ["Qidi X-Max 4 0.6 nozzle"]
|
||||
"type": "process",
|
||||
"setting_id": "GP029",
|
||||
"name": "0.24mm Balanced Strength @X-Max 4 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_n_common",
|
||||
"bridge_flow": "1",
|
||||
"bridge_speed": [
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_arc_fitting": "0",
|
||||
"gap_infill_speed": [
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55"
|
||||
],
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": [
|
||||
"35"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"5000"
|
||||
],
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"layer_height": "0.24",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"outer_wall_line_width": "0.62",
|
||||
"outer_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15"
|
||||
],
|
||||
"skin_infill_line_width": "0.62",
|
||||
"skeleton_infill_line_width": "0.62",
|
||||
"small_perimeter_threshold": [
|
||||
"4"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 4 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q1 Pro",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q1 Pro",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q2",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q2",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q2C",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi Q2C",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,92 +1,92 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.45",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"brim_object_gap": "0.1",
|
||||
"detect_thin_wall": "0",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "230",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"seam_gap": "15%",
|
||||
"sparse_infill_speed": "230",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "1",
|
||||
"wall_generator": "classic"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi X3",
|
||||
"inherits": "fdm_process_qidi_x3_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "1",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_flow": "1",
|
||||
"brim_width": "0",
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "2",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "grid",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "50%",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_line_width": "0.45",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"brim_object_gap": "0.1",
|
||||
"detect_thin_wall": "0",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "50%",
|
||||
"inner_wall_speed": "230",
|
||||
"internal_bridge_speed": "50",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"layer_height": "0.24",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"seam_gap": "15%",
|
||||
"sparse_infill_speed": "230",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "1",
|
||||
"wall_generator": "classic"
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XMax3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XMax3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Max 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XPlus3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XPlus3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XPlus4",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XPlus4",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Plus 4 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XSmart3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Qidi XSmart3",
|
||||
"inherits": "0.24mm Draft @Qidi X3",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi X-Smart 3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q1 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q1 Pro 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q1 Pro 0.8 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q1 Pro 0.8 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Qidi Q1 Pro 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2 0.8 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2 0.8 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP032",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2C 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Qidi Q2C 0.6 nozzle",
|
||||
"inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"enable_arc_fitting": "0",
|
||||
"compatible_printers": [
|
||||
"Qidi Q2C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user