mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One 0.6",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One 0.6",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One 0.8",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One 0.8",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"inherits": "Prusa Generic ABS @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One HF 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,93 +1,93 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @CORE One",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ABS @CORE One",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MINIIS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK3.5",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S 0.6",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S 0.6",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S 0.8",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S 0.8",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.4 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"inherits": "Prusa Generic ABS @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.4 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.5",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.5",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.6",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.6",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.8",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.8 nozzle"
|
||||
],
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"slow_down_layer_time": "25"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S HF0.8",
|
||||
"inherits": "Prusa Generic ABS @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S HF0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.8 nozzle"
|
||||
],
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"slow_down_layer_time": "25"
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.25 nozzle",
|
||||
"Prusa MK4S 0.3 nozzle",
|
||||
"Prusa MK4S 0.4 nozzle",
|
||||
"Prusa MK4S 0.5 nozzle"
|
||||
],
|
||||
"default_filament_colour": "#FFF2EC",
|
||||
"fan_max_speed": "10",
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "35",
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
],
|
||||
"hot_plate_temp": "110",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"overhang_fan_speed": "20",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"slow_down_layer_time": "20",
|
||||
"slow_down_min_speed": "15"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @MK4S",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Generic ABS @MK4S",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.25 nozzle",
|
||||
"Prusa MK4S 0.3 nozzle",
|
||||
"Prusa MK4S 0.4 nozzle",
|
||||
"Prusa MK4S 0.5 nozzle"
|
||||
],
|
||||
"default_filament_colour": "#FFF2EC",
|
||||
"fan_max_speed": "10",
|
||||
"filament_cost": [
|
||||
"27.82"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "35",
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4"
|
||||
],
|
||||
"hot_plate_temp": "110",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"overhang_fan_speed": "20",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"slow_down_layer_time": "20",
|
||||
"slow_down_min_speed": "15"
|
||||
}
|
||||
|
||||
@@ -1,70 +1,70 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @XL 5T",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_load_time": "15",
|
||||
"filament_unload_time": "12",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @XL 5T",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_load_time": "15",
|
||||
"filament_unload_time": "12",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_multitool_ramming": [
|
||||
"1"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"5"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"40"
|
||||
],
|
||||
"filament_stamping_distance": [
|
||||
"45"
|
||||
],
|
||||
"filament_stamping_loading_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,55 +1,55 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @XL",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_load_time": "15",
|
||||
"filament_unload_time": "12",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS @XL",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_intial_layer": "255",
|
||||
"nozzle_temperature": "255",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"hot_plate_temp": "105",
|
||||
"slow_down_min_speed": "15",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"filament_loading_speed_start": "19",
|
||||
"filament_loading_speed": "14",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "20",
|
||||
"filament_load_time": "15",
|
||||
"filament_unload_time": "12",
|
||||
"filament_cooling_moves": "5",
|
||||
"filament_cooling_initial_speed": "10",
|
||||
"filament_cooling_final_speed": "50",
|
||||
"filament_retract_lift_below": "1.5",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.04{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MINIIS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.7"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_6",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_6",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_7",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_7",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS HF @MK3.5",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One 0.6",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One 0.6",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One 0.8",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One 0.8",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.6 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"inherits": "Prusa Generic ASA @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One HF 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.015{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,93 +1,93 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @CORE One",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic ASA @CORE One",
|
||||
"instantiation": "true",
|
||||
"chamber_temperature": [
|
||||
"40"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.25 nozzle",
|
||||
"Prusa CORE One 0.3 nozzle",
|
||||
"Prusa CORE One 0.4 nozzle",
|
||||
"Prusa CORE One 0.5 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"35"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S|CORE One).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Prusa Polymers"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"130"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"25"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MINIIS",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK3.5",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S 0.6",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.6 nozzle"
|
||||
],
|
||||
"nozzle_temperature": "255",
|
||||
"slow_down_layer_time": "15"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S 0.6",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.6 nozzle"
|
||||
],
|
||||
"nozzle_temperature": "255",
|
||||
"slow_down_layer_time": "15"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S 0.8",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"slow_down_layer_time": "18"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S 0.8",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"slow_down_layer_time": "18"
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": "265",
|
||||
"nozzle_temperature_initial_layer": "265",
|
||||
"slow_down_layer_time": "15"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"inherits": "Prusa Generic ASA @MK4S",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": "265",
|
||||
"nozzle_temperature_initial_layer": "265",
|
||||
"slow_down_layer_time": "15"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.5",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.5",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.5",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.5 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"27"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.6",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.6 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.6",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.6 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.8",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"nozzle_temperature": "270",
|
||||
"nozzle_temperature_initial_layer": "270",
|
||||
"slow_down_layer_time": "20"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S HF0.8",
|
||||
"inherits": "Prusa Generic ASA @MK4S HF0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S HF0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S HF0.8 nozzle"
|
||||
],
|
||||
"fan_max_speed": "15",
|
||||
"fan_min_speed": "15",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"nozzle_temperature": "270",
|
||||
"nozzle_temperature_initial_layer": "270",
|
||||
"slow_down_layer_time": "20"
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.25 nozzle",
|
||||
"Prusa MK4S 0.3 nozzle",
|
||||
"Prusa MK4S 0.4 nozzle",
|
||||
"Prusa MK4S 0.5 nozzle"
|
||||
],
|
||||
"default_filament_colour": "#FFF2EC",
|
||||
"fan_cooling_layer_time": "20",
|
||||
"fan_max_speed": "12",
|
||||
"fan_min_speed": "12",
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "35",
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"hot_plate_temp": "110",
|
||||
"overhang_fan_speed": "20",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "15"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA @MK4S",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusament ASA @MK4S",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Prusa MK4S 0.25 nozzle",
|
||||
"Prusa MK4S 0.3 nozzle",
|
||||
"Prusa MK4S 0.4 nozzle",
|
||||
"Prusa MK4S 0.5 nozzle"
|
||||
],
|
||||
"default_filament_colour": "#FFF2EC",
|
||||
"fan_cooling_layer_time": "20",
|
||||
"fan_max_speed": "12",
|
||||
"fan_min_speed": "12",
|
||||
"filament_cost": [
|
||||
"35.28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; Filament-specific end gcode"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": "35",
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp"
|
||||
],
|
||||
"hot_plate_temp": "110",
|
||||
"overhang_fan_speed": "20",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "15"
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,53 +1,53 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MINIIS",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_6",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_6",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_7",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_7",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,51 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA HF @MK3.5",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98_5",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"26"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic ASA",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic FLEX @XL 5T",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_load_time": "0",
|
||||
"filament_unload_time": "0",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"2.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic FLEX @XL 5T",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_load_time": "0",
|
||||
"filament_unload_time": "0",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"2.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 5T 0.25 nozzle",
|
||||
"Prusa XL 5T 0.3 nozzle",
|
||||
"Prusa XL 5T 0.4 nozzle",
|
||||
"Prusa XL 5T 0.5 nozzle",
|
||||
"Prusa XL 5T 0.6 nozzle",
|
||||
"Prusa XL 5T 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic FLEX @XL",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_load_time": "0",
|
||||
"filament_unload_time": "0",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"2.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic FLEX @XL",
|
||||
"inherits": "fdm_filament_flex",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_load_time": "0",
|
||||
"filament_unload_time": "0",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_retract_lift_below": "0.6",
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"2.5"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa XL 0.25 nozzle",
|
||||
"Prusa XL 0.3 nozzle",
|
||||
"Prusa XL 0.4 nozzle",
|
||||
"Prusa XL 0.5 nozzle",
|
||||
"Prusa XL 0.6 nozzle",
|
||||
"Prusa XL 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MINIIS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_4",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.09"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_2",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.012"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_3",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.01"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_1",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA @MK3.5",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN99_1",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"1.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"1.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.22"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.22"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.15"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.15"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.36"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MINIIS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.36"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_4",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.14"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_4",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.14"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_2",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_2",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_3",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_3",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_1",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF @MK3.5",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98_1",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6.5"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINIIS 0.4 nozzle",
|
||||
"Prusa MINIIS 0.25 nozzle",
|
||||
"Prusa MINIIS 0.6 nozzle",
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA-CF",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINIIS 0.4 nozzle",
|
||||
"Prusa MINIIS 0.25 nozzle",
|
||||
"Prusa MINIIS 0.6 nozzle",
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINIIS 0.4 nozzle",
|
||||
"Prusa MINIIS 0.25 nozzle",
|
||||
"Prusa MINIIS 0.6 nozzle",
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PA",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINIIS 0.4 nozzle",
|
||||
"Prusa MINIIS 0.25 nozzle",
|
||||
"Prusa MINIIS 0.6 nozzle",
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.25",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.55"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MINIIS",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_4",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.14"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.25",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_4",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.14"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_3",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_3",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_1",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC @MK3.5",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_1",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"29"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.07"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MINIIS",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.19"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MINIIS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_5",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5 0.6",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_5",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.022"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_6",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5 0.8",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_6",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.016"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_4",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC HF @MK3.5",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99_4",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3.5 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PC",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Prusa MK3S 0.25 nozzle",
|
||||
"Prusa MK3S 0.4 nozzle",
|
||||
"Prusa MK3S 0.6 nozzle",
|
||||
"Prusa MK3S 0.8 nozzle",
|
||||
"Prusa MK4 0.25 nozzle",
|
||||
"Prusa MK4 0.4 nozzle",
|
||||
"Prusa MK4 0.6 nozzle",
|
||||
"Prusa MK4 0.8 nozzle",
|
||||
"Prusa MINI 0.25 nozzle",
|
||||
"Prusa MINI 0.4 nozzle",
|
||||
"Prusa MINI 0.6 nozzle",
|
||||
"Prusa MINI 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One 0.6",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"17"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One 0.6",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.6",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.6 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"17"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,39 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One 0.8",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One 0.8",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One 0.8",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One 0.8 nozzle"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"50"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"inherits": "Prusa Generic PETG @CORE One",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "Prusa Generic PETG @CORE One HF 0.4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Prusa CORE One HF 0.4 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.044{elsif nozzle_diameter[filament_extruder_id]==0.6}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.022{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user