mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 19:12:17 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @EX+APS",
|
||||
"inherits": "fdm_filament_abs @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @EX+APS",
|
||||
"inherits": "fdm_filament_abs @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,39 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @EX+APS",
|
||||
"inherits": "fdm_filament_pa @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @EX+APS",
|
||||
"inherits": "fdm_filament_pa @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @EX+APS",
|
||||
"inherits": "fdm_filament_pc @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @EX+APS",
|
||||
"inherits": "fdm_filament_pc @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @EX+APS",
|
||||
"inherits": "fdm_filament_pet @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @EX+APS",
|
||||
"inherits": "fdm_filament_pet @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Basic @EX+APS",
|
||||
"inherits": "fdm_filament_pla @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Basic @EX+APS",
|
||||
"inherits": "fdm_filament_pla @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @EX+APS",
|
||||
"inherits": "fdm_filament_pla_Hyper @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @EX+APS",
|
||||
"inherits": "fdm_filament_pla_Hyper @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU Basic @EX+APS",
|
||||
"inherits": "fdm_filament_tpu @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU Basic @EX+APS",
|
||||
"inherits": "fdm_filament_tpu @EX+APS",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX+APS 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,144 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG Basic"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG Basic"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @EX+APS",
|
||||
"inherits": "fdm_filament_common_EX+APS",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @EX",
|
||||
"inherits": "fdm_filament_abs @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @EX",
|
||||
"inherits": "fdm_filament_abs @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,39 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @EX",
|
||||
"inherits": "fdm_filament_pa @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @EX",
|
||||
"inherits": "fdm_filament_pa @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @EX",
|
||||
"inherits": "fdm_filament_pc @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @EX",
|
||||
"inherits": "fdm_filament_pc @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @EX",
|
||||
"inherits": "fdm_filament_pet @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @EX",
|
||||
"inherits": "fdm_filament_pet @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Basic @EX",
|
||||
"inherits": "fdm_filament_pla @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Basic @EX",
|
||||
"inherits": "fdm_filament_pla @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @EX",
|
||||
"inherits": "fdm_filament_pla_Hyper @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @EX",
|
||||
"inherits": "fdm_filament_pla_Hyper @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU Basic @EX",
|
||||
"inherits": "fdm_filament_tpu @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU Basic @EX",
|
||||
"inherits": "fdm_filament_tpu @EX",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.034"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech EX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,144 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG Basic"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG Basic"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @EX",
|
||||
"inherits": "fdm_filament_common_EX",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @HSN",
|
||||
"inherits": "fdm_filament_abs @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech ABS @HSN",
|
||||
"inherits": "fdm_filament_abs @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @HSN",
|
||||
"inherits": "fdm_filament_pa @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PA-CF @HSN",
|
||||
"inherits": "fdm_filament_pa @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @HSN",
|
||||
"inherits": "fdm_filament_pc @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PC @HSN",
|
||||
"inherits": "fdm_filament_pc @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @HSN",
|
||||
"inherits": "fdm_filament_pet @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PETG @HSN",
|
||||
"inherits": "fdm_filament_pet @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA @HSN",
|
||||
"inherits": "fdm_filament_pla @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA @HSN",
|
||||
"inherits": "fdm_filament_pla @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @HSN",
|
||||
"inherits": "fdm_filament_pla_Hyper @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper @HSN",
|
||||
"inherits": "fdm_filament_pla_Hyper @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU @HSN",
|
||||
"inherits": "fdm_filament_tpu @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech TPU @HSN",
|
||||
"inherits": "fdm_filament_tpu @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other ABS @HSN",
|
||||
"inherits": "fdm_filament_abs_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other ABS @HSN",
|
||||
"inherits": "fdm_filament_abs_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PA-CF @HSN",
|
||||
"inherits": "fdm_filament_pa_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PA-CF @HSN",
|
||||
"inherits": "fdm_filament_pa_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PC @HSN",
|
||||
"inherits": "fdm_filament_pc_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PC @HSN",
|
||||
"inherits": "fdm_filament_pc_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PETG @HSN",
|
||||
"inherits": "fdm_filament_pet_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PETG @HSN",
|
||||
"inherits": "fdm_filament_pet_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PLA @HSN",
|
||||
"inherits": "fdm_filament_pla_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PLA @HSN",
|
||||
"inherits": "fdm_filament_pla_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PLA Hyper @HSN",
|
||||
"inherits": "fdm_filament_pla_Hyper_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PLA Hyper @HSN",
|
||||
"inherits": "fdm_filament_pla_Hyper_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other TPU @HSN",
|
||||
"inherits": "fdm_filament_tpu_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other TPU @HSN",
|
||||
"inherits": "fdm_filament_tpu_other @HSN",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX HSN 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,144 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,103 +1,103 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.03"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu_other @HSN",
|
||||
"inherits": "fdm_filament_common_HSN",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PA-CF",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PA-CF",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PC",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PC",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PETG",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PETG",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PLA",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic PLA",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech Generic TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper",
|
||||
"inherits": "fdm_filament_pla_Hyper",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "InfiMech PLA Hyper",
|
||||
"inherits": "fdm_filament_pla_Hyper",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other ABS",
|
||||
"inherits": "fdm_filament_abs_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other ABS",
|
||||
"inherits": "fdm_filament_abs_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PA-CF",
|
||||
"inherits": "fdm_filament_pa_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PA-CF",
|
||||
"inherits": "fdm_filament_pa_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "true",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"4"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PC",
|
||||
"inherits": "fdm_filament_pc_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PC",
|
||||
"inherits": "fdm_filament_pc_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.058"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,54 +1,54 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PETG",
|
||||
"inherits": "fdm_filament_pet_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PETG",
|
||||
"inherits": "fdm_filament_pet_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.084"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PLA Hyper",
|
||||
"inherits": "fdm_filament_pla_Hyper_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PLA Hyper",
|
||||
"inherits": "fdm_filament_pla_Hyper_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other PLA",
|
||||
"inherits": "fdm_filament_pla_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other PLA",
|
||||
"inherits": "fdm_filament_pla_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.032"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Other TPU",
|
||||
"inherits": "fdm_filament_tpu_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Other TPU",
|
||||
"inherits": "fdm_filament_tpu_other",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.13"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"InfiMech TX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,144 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,100 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_Hyper_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"InfiMech"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,97 +1,97 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu_other",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Other"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,204 +1,204 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "InfiMech EX+APS 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech EX+APS",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech PLA Basic @EX+APS"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech EX+APS",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "167",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech EX+APS 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "InfiMech EX+APS 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech EX+APS",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech PLA Basic @EX+APS"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech EX+APS",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "167",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech EX+APS 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech EX+APS",
|
||||
"model_id": "InfiMech_EX+APS",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech EX+APS-bed.stl",
|
||||
"bed_texture": "InfiMech EX+APS-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech ABS @EX+APS;InfiMech PA-CF @EX+APS;InfiMech PC @EX+APS;InfiMech PETG @EX+APS;InfiMech PLA Basic @EX+APS;InfiMech PLA Hyper @EX+APS;InfiMech TPU Basic @EX+APS"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech EX+APS",
|
||||
"model_id": "InfiMech_EX+APS",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech EX+APS-bed.stl",
|
||||
"bed_texture": "InfiMech EX+APS-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech ABS @EX+APS;InfiMech PA-CF @EX+APS;InfiMech PC @EX+APS;InfiMech PETG @EX+APS;InfiMech PLA Basic @EX+APS;InfiMech PLA Hyper @EX+APS;InfiMech TPU Basic @EX+APS"
|
||||
}
|
||||
|
||||
@@ -1,204 +1,204 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "InfiMech EX 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech EX",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech PLA Basic @EX"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech EX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "205",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech EX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "InfiMech EX 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech EX",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech PLA Basic @EX"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech EX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "205",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech EX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech EX",
|
||||
"model_id": "InfiMech_EX",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech EX-bed.stl",
|
||||
"bed_texture": "InfiMech EX-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech ABS @EX;InfiMech PA-CF @EX;InfiMech PC @EX;InfiMech PETG @EX;InfiMech PLA Basic @EX;InfiMech PLA Hyper @EX;InfiMech TPU Basic @EX"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech EX",
|
||||
"model_id": "InfiMech_EX",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech EX-bed.stl",
|
||||
"bed_texture": "InfiMech EX-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech ABS @EX;InfiMech PA-CF @EX;InfiMech PC @EX;InfiMech PETG @EX;InfiMech PLA Basic @EX;InfiMech PLA Hyper @EX;InfiMech TPU Basic @EX"
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "InfiMech TX HSN 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech TX Hardened Steel Nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "InfiMech TX HSN 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech TX Hardened Steel Nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech TX Hardened Steel Nozzle",
|
||||
"model_id": "InfiMech_TX_HSN",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech TX-bed_HSN.stl",
|
||||
"bed_texture": "InfiMech TX-texture_HSN.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech Generic ABS;InfiMech Generic PA-CF;InfiMech Generic PC;InfiMech Generic PETG;InfiMech Generic PLA;InfiMech Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech TX Hardened Steel Nozzle",
|
||||
"model_id": "InfiMech_TX_HSN",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech TX-bed_HSN.stl",
|
||||
"bed_texture": "InfiMech TX-texture_HSN.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech Generic ABS;InfiMech Generic PA-CF;InfiMech Generic PC;InfiMech Generic PETG;InfiMech Generic PLA;InfiMech Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,201 +1,201 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,197 +1,197 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "InfiMech TX 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech TX",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "InfiMech TX 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "InfiMech TX",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech TX",
|
||||
"model_id": "InfiMech_TX",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech TX-bed.stl",
|
||||
"bed_texture": "InfiMech TX-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech Generic ABS;InfiMech Generic PA-CF;InfiMech Generic PC;InfiMech Generic PETG;InfiMech Generic PLA;InfiMech Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "InfiMech TX",
|
||||
"model_id": "InfiMech_TX",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "InfiMechDesign",
|
||||
"bed_model": "InfiMech TX-bed.stl",
|
||||
"bed_texture": "InfiMech TX-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "InfiMech Generic ABS;InfiMech Generic PA-CF;InfiMech Generic PC;InfiMech Generic PETG;InfiMech Generic PLA;InfiMech Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,201 +1,201 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,197 +1,197 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"InfiMech Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @InfiMech TX",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "49",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.2-20240814;\n;wiping nozzle start\nM106 P3 S0\nM140 S[bed_temperature_initial_layer_single]\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S[bed_temperature_initial_layer_single]\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "InfiMech TX 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user