juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-17 10:32:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reduce size by Json Fromatting (#13163)

Browse Source 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
2026-04-15 11:58:12 -03:00
committed by GitHub
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

102
resources/profiles/Geeetech/machine/Geeetech A10 M 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A10 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_025",
"instantiation": "true",
"printer_model": "Geeetech A10 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10M: https://www.geeetech.com/wiki/index.php/Geeetech_A10M_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_025",
"instantiation": "true",
"printer_model": "Geeetech A10 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10M: https://www.geeetech.com/wiki/index.php/Geeetech_A10M_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A10 M.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A10 M",
"model_id": "Geeetech_A10 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A10 M",
"model_id": "Geeetech_A10 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech A10 Pro 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A10 Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_021",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_021",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A10 Pro 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A10 Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_022",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_022",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A10 Pro 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A10 Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_023",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_023",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A10 Pro 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A10 Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_024",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_024",
"instantiation": "true",
"printer_model": "Geeetech A10 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A10: https://www.geeetech.com/wiki/index.php/Geeetech_A10_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A10 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A10 Pro",
"model_id": "Geeetech_A10 Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A10 Pro",
"model_id": "Geeetech_A10 Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

102
resources/profiles/Geeetech/machine/Geeetech A10 T 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A10 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_026",
"instantiation": "true",
"printer_model": "Geeetech A10 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A10 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_026",
"instantiation": "true",
"printer_model": "Geeetech A10 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A10 T.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A10 T",
"model_id": "Geeetech_A10 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A10 T",
"model_id": "Geeetech_A10 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech A20 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A20 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_027",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_027",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A20 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A20 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_028",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_028",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A20 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A20 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_029",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_029",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A20 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A20 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_030",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_030",
"instantiation": "true",
"printer_model": "Geeetech A20",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20: https://www.geeetech.com/wiki/index.php/Geeetech_A20_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

102
resources/profiles/Geeetech/machine/Geeetech A20 M 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A20 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_031",
"instantiation": "true",
"printer_model": "Geeetech A20 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20M: https://www.geeetech.com/wiki/index.php/Geeetech_A20M_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_031",
"instantiation": "true",
"printer_model": "Geeetech A20 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A20M: https://www.geeetech.com/wiki/index.php/Geeetech_A20M_3D_printer \nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A20 M.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A20 M",
"model_id": "Geeetech_A20 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A20 M",
"model_id": "Geeetech_A20 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

102
resources/profiles/Geeetech/machine/Geeetech A20 T 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A20 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_032",
"instantiation": "true",
"printer_model": "Geeetech A20 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A20 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_032",
"instantiation": "true",
"printer_model": "Geeetech A20 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A20 T.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A20 T",
"model_id": "Geeetech_A20 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A20 T",
"model_id": "Geeetech_A20 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

22
resources/profiles/Geeetech/machine/Geeetech A20.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A20",
"model_id": "Geeetech_A20",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A20",
"model_id": "Geeetech_A20",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

102
resources/profiles/Geeetech/machine/Geeetech A30 M 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A30 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_037",
"instantiation": "true",
"printer_model": "Geeetech A30 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_037",
"instantiation": "true",
"printer_model": "Geeetech A30 M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A30 M.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A30 M",
"model_id": "Geeetech_A30 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A30 M",
"model_id": "Geeetech_A30 M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech A30 Pro 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A30 Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_033",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_033",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A30 Pro 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A30 Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_034",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_034",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A30 Pro 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A30 Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_035",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_035",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech A30 Pro 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech A30 Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_036",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_036",
"instantiation": "true",
"printer_model": "Geeetech A30 Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Geeetech official wiki homepage for A30: https://www.geeetech.com/wiki/index.php/Geeetech_A30_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A30 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A30 Pro",
"model_id": "Geeetech_A30 Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A30 Pro",
"model_id": "Geeetech_A30 Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

102
resources/profiles/Geeetech/machine/Geeetech A30 T 0.4 nozzle.json
View File

@@ -1,52 +1,52 @@
{
"type": "machine",
"name": "Geeetech A30 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_038",
"instantiation": "true",
"printer_model": "Geeetech A30 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech A30 T 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_038",
"instantiation": "true",
"printer_model": "Geeetech A30 T",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"6.5"
],
"retract_restart_extra": [
"-0.2"
],
"retraction_speed": [
"25"
],
"deretraction_speed": [
"25"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "420",
"retract_lift_below": [
"419"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; set bed temp\nM190 S[bed_temperature_initial_layer[initial_no_support_extruder]] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nT[initial_no_support_extruder] ; Choose initial filament for the first line\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "G1 E-2.5 F2100 ; Retract filament\nG92 E0.0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height+0.2)}{endif} E-1.5 F720 ; Retract and raise Z\nG4 ; wait\nM104 S0 ; Cooldown hotend\nM140 S0 ; Cooldown bed\nM107 ; off fan\nG1 X0 Y100 F3000 ; park print head\nM84 ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech A30 T.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech A30 T",
"model_id": "Geeetech_A30 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech A30 T",
"model_id": "Geeetech_A30 T",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

216
resources/profiles/Geeetech/machine/Geeetech M1 0.2 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Geeetech M1 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_039",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech M1 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech M1 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_039",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech M1 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

216
resources/profiles/Geeetech/machine/Geeetech M1 0.4 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Geeetech M1 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_040",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech M1",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech M1 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_040",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech M1",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

216
resources/profiles/Geeetech/machine/Geeetech M1 0.6 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Geeetech M1 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_041",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech M1 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech M1 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_041",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech M1 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

216
resources/profiles/Geeetech/machine/Geeetech M1 0.8 nozzle.json
View File

@@ -1,109 +1,109 @@
{
"type": "machine",
"name": "Geeetech M1 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_042",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.44mm Draft @Geeetech M1 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech M1 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_042",
"instantiation": "true",
"printer_model": "Geeetech M1",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.44mm Draft @Geeetech M1 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Direct Drive"
],
"machine_max_acceleration_e": [
"3000",
"3000"
],
"machine_max_acceleration_extruding": [
"3000",
"3000"
],
"machine_max_acceleration_retracting": [
"3000",
"3000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"3000",
"3000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"25",
"25"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"3",
"3"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retraction_length": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"printable_area": [
"0x0",
"105x0",
"105x105",
"0x105"
],
"printable_height": "95",
"retract_lift_below": [
"95"
],
"machine_start_gcode": ";Geeetech M1 official wiki URL: https://www.geeetech.com/wiki/index.php/Geeetech_M1_3D_printer \nM104 S[first_layer_temperature] ; Set Hotend Temperature\nM140 S[first_layer_bed_temperature] ; set Bed Temperature\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temperature\nM109 S[first_layer_temperature] ; wait for Hotend Temperature\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Main Fan\nM300 S2500 P1000 ;Play a short tune\nG1 Z0.28 ;Move Z Axis up little to prevent scratching of Heat Bed\nG92 E0 ;Reset Extruder\nG1 Y3 F2400 ;Move to start position\nG1 X75 E40 F500 ;Draw a filament line\nG92 E0 ;Reset Extruder\n;G1 E-0.2 F3000 ;Retract a little\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X70 Y3 Z0.27 F3000 ;Quickly wipe away from the filament line\nG92 E0 ;Reset Extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors\nM221 S100;Slicer Flow recovery 100%\nM220 S100 ;Set Feedrate recovery 100%\nM204 P3000.00 R3000.00 T3000.00",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech M1.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech M1",
"model_id": "Geeetech_M1",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "105x105.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech M1",
"model_id": "Geeetech_M1",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "105x105.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_005",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_005",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_006",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_006",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_007",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_007",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_008",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_008",
"instantiation": "true",
"printer_model": "Geeetech Mizar",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar M 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_021",
"instantiation": "true",
"printer_model": "Geeetech Mizar M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarM: https://www.geeetech.com/wiki/index.php/Mizar_M \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar M 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_021",
"instantiation": "true",
"printer_model": "Geeetech Mizar M",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarM: https://www.geeetech.com/wiki/index.php/Mizar_M \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech Mizar M.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Mizar M",
"model_id": "Geeetech_Mizar M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "255x255.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Mizar M",
"model_id": "Geeetech_Mizar M",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "255x255.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Max 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Max 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_017",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Max 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_017",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Max 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Max 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_018",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Max 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_018",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Max 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Max 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_019",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Max 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_019",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Max 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Max 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_020",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Max 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_020",
"instantiation": "true",
"printer_model": "Geeetech Mizar Max",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"retract_lift_below": [
"399"
],
"machine_start_gcode": ";Custom Start G-code\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech Mizar Max.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Mizar Max",
"model_id": "Geeetech_Mizar Max",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Mizar Max",
"model_id": "Geeetech_Mizar Max",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "320x320.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Pro 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_013",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Pro 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_013",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Pro 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_014",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Pro 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_014",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Pro 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_015",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Pro 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_015",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar Pro 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_016",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar Pro 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_016",
"instantiation": "true",
"printer_model": "Geeetech Mizar Pro",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarPro: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_Pro_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech Mizar Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Mizar Pro",
"model_id": "Geeetech_Mizar Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Mizar Pro",
"model_id": "Geeetech_Mizar Pro",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar S 0.2 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar S 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_009",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar S 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_009",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Standard @Geeetech common 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar S 0.4 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar S 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_010",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar S 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_010",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech common",
"nozzle_diameter": [
"0.4"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar S 0.6 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar S 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_011",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar S 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_011",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech common 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

78
resources/profiles/Geeetech/machine/Geeetech Mizar S 0.8 nozzle.json
View File

@@ -1,40 +1,40 @@
{
"type": "machine",
"name": "Geeetech Mizar S 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_012",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Geeetech Mizar S 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_012",
"instantiation": "true",
"printer_model": "Geeetech Mizar S",
"default_filament_profile": [
"Generic PLA @System"
],
"printer_variant": "0.8",
"default_print_profile": "0.40mm Standard @Geeetech common 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"extruder_type": [
"Bowden"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_start_gcode": ";Geeetech official wiki homepage for MizarS: https://www.geeetech.com/wiki/index.php/Geeetech_Mizar_S_3D_Printer \nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 ;Off Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z1.4 F6000 ; Move to start position\nG1 X0.1 Y80.0 Z1.4 F1000 E25 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y80.0 Z1.4 F6000 ; Move to side a little\nG1 X1.4 Y20 Z1.4 F1000 E20 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.28 F3000.0 ; Move over to prevent blob squish\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

22
resources/profiles/Geeetech/machine/Geeetech Mizar S.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Mizar S",
"model_id": "Geeetech_Mizar S",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "255x255.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Mizar S",
"model_id": "Geeetech_Mizar S",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "255x255.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

22
resources/profiles/Geeetech/machine/Geeetech Mizar.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Mizar",
"model_id": "Geeetech_Mizar",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Mizar",
"model_id": "Geeetech_Mizar",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "220x220.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

190
resources/profiles/Geeetech/machine/Geeetech Thunder 0.2 nozzle.json
View File

@@ -1,96 +1,96 @@
{
"type": "machine",
"name": "Geeetech Thunder 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_002",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Fine @Geeetech Thunder",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}
"type": "machine",
"name": "Geeetech Thunder 0.2 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_002",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"default_print_profile": "0.10mm Fine @Geeetech Thunder",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}

190
resources/profiles/Geeetech/machine/Geeetech Thunder 0.4 nozzle.json
View File

@@ -1,96 +1,96 @@
{
"type": "machine",
"name": "Geeetech Thunder 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_001",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech Thunder",
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}
"type": "machine",
"name": "Geeetech Thunder 0.4 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_001",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"default_print_profile": "0.20mm Standard @Geeetech Thunder",
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}

190
resources/profiles/Geeetech/machine/Geeetech Thunder 0.6 nozzle.json
View File

@@ -1,96 +1,96 @@
{
"type": "machine",
"name": "Geeetech Thunder 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_003",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}
"type": "machine",
"name": "Geeetech Thunder 0.6 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_003",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"default_print_profile": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}

190
resources/profiles/Geeetech/machine/Geeetech Thunder 0.8 nozzle.json
View File

@@ -1,96 +1,96 @@
{
"type": "machine",
"name": "Geeetech Thunder 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_004",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"default_print_profile": "0.44mm Draft @Geeetech Thunder 0.8 nozzle",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}
"type": "machine",
"name": "Geeetech Thunder 0.8 nozzle",
"inherits": "fdm_geeetech_common",
"from": "system",
"setting_id": "GM_GEEETECH_004",
"instantiation": "true",
"printer_model": "Geeetech Thunder",
"default_filament_profile": [
"Generic PLA @System"
],
"extruder_type": [
"Bowden"
],
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"default_print_profile": "0.44mm Draft @Geeetech Thunder 0.8 nozzle",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "260",
"retract_lift_below": [
"259"
],
"machine_max_acceleration_extruding": [
"3500",
"3500"
],
"machine_max_acceleration_retracting": [
"3500",
"3500"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"4000",
"4000"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"35",
"35"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"8",
"8"
],
"machine_max_jerk_x": [
"45",
"45"
],
"machine_max_jerk_y": [
"45",
"45"
],
"machine_max_jerk_z": [
"0.8",
"0.8"
],
"machine_start_gcode": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer\n\nM104 S[first_layer_temperature] ; Set Hotend Temp.\nM140 S[first_layer_bed_temperature] ; Set bed Temp.\nM190 S[first_layer_bed_temperature] ; Wait for Bed Temp.\nM109 S[first_layer_temperature] ; Wait for Hotend Temp.\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move the Z-axis slightly up to prevent scratching the heatbed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue\nG92 E0\n;---------------------------------------\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\n;---------------------------------------",
"machine_end_gcode": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers",
"nozzle_type": "brass",
"auxiliary_fan": "1"
}

22
resources/profiles/Geeetech/machine/Geeetech Thunder.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Geeetech Thunder",
"model_id": "Geeetech_Thunder",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}
"type": "machine_model",
"name": "Geeetech Thunder",
"model_id": "Geeetech_Thunder",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Geeetech",
"bed_model": "250x250.stl",
"bed_texture": "Geeetech_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic ABS @System;Generic TPU @System"
}

152
resources/profiles/Geeetech/machine/fdm_Geeetech_HS_common.json
View File

@@ -1,77 +1,77 @@
{
"type": "machine",
"name": "fdm_Geeetech_HS_common",
"inherits": "fdm_geeetech_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"auxiliary_fan": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"2",
"2"
],
"default_filament_profile": [
"Generic PLA @System"
],
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"machine_start_gcode": "G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\nG0 Z{min(max_print_height,max_layer_z+10)} F600\nG0 X0 Y{print_bed_max[1]} F12000",
"scan_first_layer": "0"
}
"type": "machine",
"name": "fdm_Geeetech_HS_common",
"inherits": "fdm_geeetech_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"auxiliary_fan": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"2",
"2"
],
"default_filament_profile": [
"Generic PLA @System"
],
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"machine_start_gcode": "G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E0\nG1 E-3 F1800\nG90\nG0 Z{min(max_print_height,max_layer_z+10)} F600\nG0 X0 Y{print_bed_max[1]} F12000",
"scan_first_layer": "0"
}

280
resources/profiles/Geeetech/machine/fdm_geeetech_common.json
View File

@@ -1,141 +1,141 @@
{
"type": "machine",
"name": "fdm_geeetech_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"1000",
"1000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_max_radius": "47",
"extruder_clearance_dist_to_rod": "24",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"7"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"20"
],
"deretraction_speed": [
"20"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @System"
],
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"layer_change_gcode": ";------------------------------------\n;layer No: [layer_num] ———>Print Height: [layer_z] mm\n;------------------------------------",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"support_multi_bed_types": "1",
"auxiliary_fan": "0",
"z_hop_types": "Normal Lift"
}
"type": "machine",
"name": "fdm_geeetech_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"1000",
"1000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_max_radius": "47",
"extruder_clearance_dist_to_rod": "24",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"7"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"20"
],
"deretraction_speed": [
"20"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @System"
],
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"layer_change_gcode": ";------------------------------------\n;layer No: [layer_num] ———>Print Height: [layer_z] mm\n;------------------------------------",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"support_multi_bed_types": "1",
"auxiliary_fan": "0",
"z_hop_types": "Normal Lift"
}

238
resources/profiles/Geeetech/machine/fdm_machine_common.json
View File

@@ -1,120 +1,120 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"10000"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"10000"
],
"machine_max_acceleration_y": [
"10000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_max_radius": "65",
"extruder_clearance_dist_to_rod": "33",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
"before_layer_change_gcode": "G92 E0",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_pause_gcode": "M601",
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
}
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"10000"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"10000"
],
"machine_max_acceleration_y": [
"10000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_max_radius": "65",
"extruder_clearance_dist_to_rod": "33",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"single_extruder_multi_material": "0",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
"before_layer_change_gcode": "G92 E0",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_pause_gcode": "M601",
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
}