mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 19:12:17 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-5 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-5",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"retraction_length": [
|
||||
"4.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-5 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-5",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"retraction_length": [
|
||||
"4.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-5 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-5",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"retraction_length": [
|
||||
"4.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-5 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-5",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"retraction_length": [
|
||||
"4.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech FT-5",
|
||||
"model_id": "FT-5",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_FT5_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_FT5_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech FT-5",
|
||||
"model_id": "FT-5",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_FT5_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_FT5_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;"
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-6 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-6",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"700x0",
|
||||
"700x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-6 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-6",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"700x0",
|
||||
"700x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-6 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"700x0",
|
||||
"700x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech FT-6 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM002",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech FT-6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"700x0",
|
||||
"700x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech FT-6",
|
||||
"model_id": "FT-6",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_FT6_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_FT6_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"extruders_count": "2",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech FT-6",
|
||||
"model_id": "FT-6",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_FT6_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_FT6_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"extruders_count": "2",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;Generic TPU @System;"
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech i3 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech i3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"200x0",
|
||||
"200x200",
|
||||
"0x200"
|
||||
],
|
||||
"printable_height": "175",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech i3 0.4 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech i3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"200x0",
|
||||
"200x200",
|
||||
"0x200"
|
||||
],
|
||||
"printable_height": "175",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.20mm Standard @FT"
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Folgertech i3 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech i3",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"20x0",
|
||||
"200x200",
|
||||
"0x200"
|
||||
],
|
||||
"printable_height": "175",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Folgertech i3 0.6 nozzle",
|
||||
"inherits": "fdm_folgertech_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Folgertech i3",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"20x0",
|
||||
"200x200",
|
||||
"0x200"
|
||||
],
|
||||
"printable_height": "175",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"default_print_profile": "0.30mm Standard @FT 0.6 Nozzle"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech i3",
|
||||
"model_id": "i3",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_i3_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_i3_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Folgertech i3",
|
||||
"model_id": "i3",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Folgertech",
|
||||
"bed_model": "Folgertech_i3_buildplate_model.stl",
|
||||
"bed_texture": "Folgertech_i3_buildplate_texture.png",
|
||||
"hotend_model": "hotend.stl",
|
||||
"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System;"
|
||||
}
|
||||
|
||||
@@ -1,138 +1,138 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_folgertech_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FT 0.4 Nozzle",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G28 ; Home all axis\nG1 X0 Y5 Z0.2 F3000 ; Get ready to prime\nG92 E0 ; Reset extrusion distance\nG1 X250 E20 F600 ; Prime nozzle",
|
||||
"machine_end_gcode": "M140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nG28 X Y ; Home X and Y axis\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_folgertech_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FT 0.4 Nozzle",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G28 ; Home all axis\nG1 X0 Y5 Z0.2 F3000 ; Get ready to prime\nG92 E0 ; Reset extrusion distance\nG1 X250 E20 F600 ; Prime nozzle",
|
||||
"machine_end_gcode": "M140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nG28 X Y ; Home X and Y axis\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,118 +1,118 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_lift_type": "NormalLift",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user