mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,200 +1,200 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user