mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,201 +1,201 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "FlyingBear S1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear S1",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA @S1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear S1",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.3-20250610;\n;wiping nozzle start\nM106 P3 S0\nM140 S60\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S60\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S60\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S60 ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear S1 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "FlyingBear S1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear S1",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA @S1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear S1",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.3-20250610;\n;wiping nozzle start\nM106 P3 S0\nM140 S60\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S60\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S60\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S60 ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear S1 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear S1",
|
||||
"model_id": "FlyingBear_S1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear S1-bed.stl",
|
||||
"bed_texture": "FlyingBear S1-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear S1",
|
||||
"model_id": "FlyingBear_S1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear S1-bed.stl",
|
||||
"bed_texture": "FlyingBear S1-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user