mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,134 +1,134 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Ghost 6 0.4 nozzle",
|
||||
"inherits": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Ghost 6",
|
||||
"gcode_flavor": "marlin2",
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Ghost 6",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "210",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_multi_bed_types": "1",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"4",
|
||||
"4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.0",
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"extruder_clearance_height_to_lid": "80",
|
||||
"extruder_clearance_height_to_rod": "64",
|
||||
"extruder_clearance_radius": "55",
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;reset feedrate\nM221 S100 ;reset flowrate\nG21 ;set units to millimeters\nG90 ;use absolute coordinates\nM82 ;absolute extrusion mode\nM107 ;turn off colling fan\n\nM140 S[bed_temperature_initial_layer] ;set bed temperature continue without waiting\nM104 S[nozzle_temperature_initial_layer] ;set hotend temperature continue without waiting\n\nG28 ;home\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n\nM190 S[bed_temperature_initial_layer] ;wait for bed temperature\nM109 S[nozzle_temperature_initial_layer] ;wait for hotend temperature\n\nG1 X20 Y20 F5000 ;start position \nG1 Z0.28 F1500 ;lower z\nG1 E4 F500 ;prime the filament\n\nG1 X20 Y20.0 Z0.28 F3000.0 ;start position \nG1 X20 Y170.0 Z0.28 F1500.0 E12 ;1st line\nG1 X20.3 F1500\nG1 X20.3 Y20.0 Z0.28 F1500.0 E18 ;2nd line\n\nG92 E0 ;reset extruder\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n",
|
||||
"machine_end_gcode": "G91 ;use relative coordinates\nG1 E-4 F1500 ;retract the filament\nG1 X5 Y5 Z0.2 F5000 ;wipe\nG1 Z5 F1500 ;raise z\nG90 ;use absolute coordinates\nG1 X10 Y210 F5000 ;park print head\n\nM107 ;turn off fan\nM104 S0 ;turn off hotend\nM140 S0 ;turn off heatbed\nM84 ;disable motors",
|
||||
"scan_first_layer": "0",
|
||||
"thumbnails": [
|
||||
"100x100",
|
||||
"320x320"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Ghost 6 0.4 nozzle",
|
||||
"inherits": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Ghost 6",
|
||||
"gcode_flavor": "marlin2",
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Ghost 6",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x210",
|
||||
"0x210"
|
||||
],
|
||||
"printable_height": "210",
|
||||
"nozzle_type": "brass",
|
||||
"auxiliary_fan": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_multi_bed_types": "1",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3000",
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"4",
|
||||
"4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.0",
|
||||
"2.0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"extruder_clearance_height_to_lid": "80",
|
||||
"extruder_clearance_height_to_rod": "64",
|
||||
"extruder_clearance_radius": "55",
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "M220 S100 ;reset feedrate\nM221 S100 ;reset flowrate\nG21 ;set units to millimeters\nG90 ;use absolute coordinates\nM82 ;absolute extrusion mode\nM107 ;turn off colling fan\n\nM140 S[bed_temperature_initial_layer] ;set bed temperature continue without waiting\nM104 S[nozzle_temperature_initial_layer] ;set hotend temperature continue without waiting\n\nG28 ;home\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n\nM190 S[bed_temperature_initial_layer] ;wait for bed temperature\nM109 S[nozzle_temperature_initial_layer] ;wait for hotend temperature\n\nG1 X20 Y20 F5000 ;start position \nG1 Z0.28 F1500 ;lower z\nG1 E4 F500 ;prime the filament\n\nG1 X20 Y20.0 Z0.28 F3000.0 ;start position \nG1 X20 Y170.0 Z0.28 F1500.0 E12 ;1st line\nG1 X20.3 F1500\nG1 X20.3 Y20.0 Z0.28 F1500.0 E18 ;2nd line\n\nG92 E0 ;reset extruder\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n",
|
||||
"machine_end_gcode": "G91 ;use relative coordinates\nG1 E-4 F1500 ;retract the filament\nG1 X5 Y5 Z0.2 F5000 ;wipe\nG1 Z5 F1500 ;raise z\nG90 ;use absolute coordinates\nG1 X10 Y210 F5000 ;park print head\n\nM107 ;turn off fan\nM104 S0 ;turn off hotend\nM140 S0 ;turn off heatbed\nM84 ;disable motors",
|
||||
"scan_first_layer": "0",
|
||||
"thumbnails": [
|
||||
"100x100",
|
||||
"320x320"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Ghost 6",
|
||||
"model_id": "FlyingBear Ghost 6",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Ghost 6-bed.stl",
|
||||
"bed_texture": "FlyingBear Ghost 6-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Ghost 6",
|
||||
"model_id": "FlyingBear Ghost 6",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Ghost 6-bed.stl",
|
||||
"bed_texture": "FlyingBear Ghost 6-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Reborn3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Reborn3",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Reborn3",
|
||||
"model_id": "FlyingBear Reborn3",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Reborn3-bed.stl",
|
||||
"bed_texture": "FlyingBear Reborn3-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Reborn3",
|
||||
"model_id": "FlyingBear Reborn3",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Reborn3-bed.stl",
|
||||
"bed_texture": "FlyingBear Reborn3-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,204 +1,204 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Ghost7 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Ghost7",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA Basic @Ghost7"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Ghost7",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "205",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Ghost7 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "FlyingBear Ghost7 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear Ghost7",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"242x0",
|
||||
"250x0",
|
||||
"250x30",
|
||||
"242x30"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA Basic @Ghost7"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Ghost7",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nM117 Layer {layer_num+1}/[total_layer_count] : {filament_settings_id[0]}",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v1.0.1-20250822;\n;*****************************\nBED_MESH_CLEAR\nM140 S[bed_temperature_initial_layer_single]\nPRINT_START\n;*************PRINT START*************\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 ;move head to drawing line position\nG1 Z0 F100\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\n;BED_MESH_CLEAR \n;BED_MESH_PROFILE LOAD=default # bedmesh load\nG1 Z2.0 F200 ;Move Z Axis up\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E8 F300 ;extrude filament\nG90\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 80,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F1500 E15\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E18\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] ; display layers begin\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x250",
|
||||
"0x250"
|
||||
],
|
||||
"printable_height": "205",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Ghost7 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"430x344"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Ghost7",
|
||||
"model_id": "FlyingBear_Ghost7",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Ghost7-bed.stl",
|
||||
"bed_texture": "FlyingBear Ghost7-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear Ghost7",
|
||||
"model_id": "FlyingBear_Ghost7",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear Ghost7-bed.stl",
|
||||
"bed_texture": "FlyingBear Ghost7-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,201 +1,201 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "FlyingBear S1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear S1",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA @S1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear S1",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.3-20250610;\n;wiping nozzle start\nM106 P3 S0\nM140 S60\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S60\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S60\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S60 ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear S1 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "FlyingBear S1 0.4 nozzle",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "FlyingBear S1",
|
||||
"auxiliary_fan": "1",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear PLA @S1"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear S1",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "69",
|
||||
"extruder_clearance_height_to_rod": "69",
|
||||
"extruder_clearance_radius": "55",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";v2.9.3-20250610;\n;wiping nozzle start\nM106 P3 S0\nM140 S60\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S60\nM104 S130\nG1 X110 Y110 F10000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nG1 Z5\nM190 S60\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S60 ;heat hotbed temp set by user\nG1 X5 Y5 F8000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0 F400\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR \nBED_MESH_PROFILE LOAD=default # bedmesh load\nG92 E0 ;Reset Extruder\n;G1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\n;G92 E0 ;reset extruder\nG1 E3 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 100,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)} F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear S1 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"249"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear S1",
|
||||
"model_id": "FlyingBear_S1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear S1-bed.stl",
|
||||
"bed_texture": "FlyingBear S1-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "FlyingBear S1",
|
||||
"model_id": "FlyingBear_S1",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "FlyingBearDesign",
|
||||
"bed_model": "FlyingBear S1-bed.stl",
|
||||
"bed_texture": "FlyingBear S1-texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
|
||||
}
|
||||
|
||||
@@ -1,200 +1,200 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,196 +1,196 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "klipper",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_filament_profile": [
|
||||
"FlyingBear Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @FlyingBear Reborn3",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "151.32",
|
||||
"parking_pos_retraction": "92",
|
||||
"print_host_webui": "",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Generic Klipper Printer",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "FlyingBear Reborn3 0.4 nozzle",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_apikey": "",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_cafile": "",
|
||||
"printhost_password": "",
|
||||
"printhost_port": "",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printhost_user": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"349"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": [
|
||||
"300x300"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,119 +1,119 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user