juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-20 03:43:52 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reduce size by Json Fromatting (#13163)

Browse Source 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
2026-04-15 11:58:12 -03:00
committed by GitHub
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
resources/profiles/Eryone/machine/ER20/Eryone ER20 0.2 nozzle.json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.10mm Standard @Eryone ER20 0.2 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"name": "Eryone ER20 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.2",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.10mm Standard @Eryone ER20 0.2 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"name": "Eryone ER20 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.2",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20/Eryone ER20 0.4 nozzle.json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.20mm Standard @Eryone ER20",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"name": "Eryone ER20 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.4",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.20mm Standard @Eryone ER20",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"name": "Eryone ER20 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.4",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20/Eryone ER20 0.5 nozzle.json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.25mm Standard @Eryone ER20 0.5 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.38"
],
"min_layer_height": [
"0.10"
],
"name": "Eryone ER20 0.5 nozzle",
"nozzle_diameter": [
"0.5"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.5",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.25mm Standard @Eryone ER20 0.5 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.38"
],
"min_layer_height": [
"0.10"
],
"name": "Eryone ER20 0.5 nozzle",
"nozzle_diameter": [
"0.5"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.5",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20/Eryone ER20 0.6 nozzle.json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.30mm Standard @Eryone ER20 0.6 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"name": "Eryone ER20 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.6",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.30mm Standard @Eryone ER20 0.6 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"name": "Eryone ER20 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.6",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20/Eryone ER20 0.8 nozzle.json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.40mm Standard @Eryone ER20 0.8 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"name": "Eryone ER20 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.8",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.40mm Standard @Eryone ER20 0.8 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_common",
"instantiation": "true",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"name": "Eryone ER20 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Eryone ER20",
"printer_variant": "0.8",
"type": "machine"
}

18
resources/profiles/Eryone/machine/ER20/Eryone ER20.json
View File

@@ -1,11 +1,11 @@
{
"bed_model": "eryone_er20_buildplate_model.stl",
"bed_texture": "Eryone ER20_texture.png",
"family": "Eryone",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Eryone ER20",
"name": "Eryone ER20",
"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
"type": "machine_model"
"bed_model": "eryone_er20_buildplate_model.stl",
"bed_texture": "Eryone ER20_texture.png",
"family": "Eryone",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Eryone ER20",
"name": "Eryone ER20",
"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
"type": "machine_model"
}

36
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.2 nozzle .json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.10mm Standard @Eryone ER20 Klipper 0.2 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"name": "Eryone ER20 Klipper 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.2",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.10mm Standard @Eryone ER20 Klipper 0.2 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"name": "Eryone ER20 Klipper 0.2 nozzle",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.2",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.4 nozzle .json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.20mm Standard @Eryone ER20 Klipper",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"name": "Eryone ER20 Klipper 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.4",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.20mm Standard @Eryone ER20 Klipper",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"name": "Eryone ER20 Klipper 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.4",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.5 nozzle .json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.38"
],
"min_layer_height": [
"0.10"
],
"name": "Eryone ER20 Klipper 0.5 nozzle",
"nozzle_diameter": [
"0.5"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.5",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.38"
],
"min_layer_height": [
"0.10"
],
"name": "Eryone ER20 Klipper 0.5 nozzle",
"nozzle_diameter": [
"0.5"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.5",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.6 nozzle .json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"name": "Eryone ER20 Klipper 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.6",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"name": "Eryone ER20 Klipper 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.6",
"type": "machine"
}

36
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.8 nozzle .json
View File

@@ -1,20 +1,20 @@
{
"default_filament_profile": [],
"default_print_profile": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"name": "Eryone ER20 Klipper 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.8",
"type": "machine"
"default_filament_profile": [],
"default_print_profile": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle",
"from": "system",
"inherits": "fdm_machine_eryone_ER20_Klipper_common",
"instantiation": "true",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"name": "Eryone ER20 Klipper 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Eryone ER20 Klipper",
"printer_variant": "0.8",
"type": "machine"
}

24
resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json
View File

@@ -1,13 +1,13 @@
{
"bed_model": "eryone_er20_buildplate_model.stl",
"bed_texture": "Eryone ER20_texture.png",
"default_bed_type": "Textured PEI Plate",
"family": "Eryone",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Eryone ER20 Klipper",
"name": "Eryone ER20 Klipper",
"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
"type": "machine_model",
"desciption": "optimized Eryone ER20 Klipper configuration with E3D Hotend, BMG directdrive, printable height limited to 200 because of the directdrive and Z-Sync mod"
{
"bed_model": "eryone_er20_buildplate_model.stl",
"bed_texture": "Eryone ER20_texture.png",
"default_bed_type": "Textured PEI Plate",
"family": "Eryone",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Eryone ER20 Klipper",
"name": "Eryone ER20 Klipper",
"nozzle_diameter": "0.4;0.2;0.5;0.6;0.8",
"type": "machine_model",
"desciption": "optimized Eryone ER20 Klipper configuration with E3D Hotend, BMG directdrive, printable height limited to 200 because of the directdrive and Z-Sync mod"
}

45
resources/profiles/Eryone/machine/Thinker X400 0.2 nozzle.json
View File

@@ -1,25 +1,24 @@
{
"type": "machine",
"from": "system",
"name": "Thinker X400 0.2 nozzle",
"inherits": "Thinker X400 0.4 nozzle",
"setting_id": "GM0032",
"instantiation": "true",
"printer_model": "Thinker X400",
"default_print_profile": "0.10mm Standard @Thinker X400 0.2 nozzle",
"default_filament_profile":"Eryone PLA @0.2 nozzle;Eryone ABS @0.2 nozzle;Eryone ASA @0.2 nozzle;Eryone PETG @0.2 nozzle;Eryone Silk PLA @0.2 nozzle;Eryone TPU @0.2 nozzle;Eryone ABS-CF @0.2 nozzle;Eryone ASA-CF @0.2 nozzle;Eryone PA @0.2 nozzle;Eryone PA-CF @0.2 nozzle;Eryone PA-GF @0.2 nozzle;Eryone PETG-CF @0.2 nozzle;Eryone PLA-CF @0.2 nozzle;Eryone PP @0.2 nozzle;Eryone PP-CF @0.2 nozzle;",
"machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.2 ;intro line with 0.2 mm nozzle",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"nozzle_diameter": [
"0.2"
],
"retraction_length": [
"0.5"
]
"type": "machine",
"from": "system",
"name": "Thinker X400 0.2 nozzle",
"inherits": "Thinker X400 0.4 nozzle",
"setting_id": "GM0032",
"instantiation": "true",
"printer_model": "Thinker X400",
"default_print_profile": "0.10mm Standard @Thinker X400 0.2 nozzle",
"default_filament_profile": "Eryone PLA @0.2 nozzle;Eryone ABS @0.2 nozzle;Eryone ASA @0.2 nozzle;Eryone PETG @0.2 nozzle;Eryone Silk PLA @0.2 nozzle;Eryone TPU @0.2 nozzle;Eryone ABS-CF @0.2 nozzle;Eryone ASA-CF @0.2 nozzle;Eryone PA @0.2 nozzle;Eryone PA-CF @0.2 nozzle;Eryone PA-GF @0.2 nozzle;Eryone PETG-CF @0.2 nozzle;Eryone PLA-CF @0.2 nozzle;Eryone PP @0.2 nozzle;Eryone PP-CF @0.2 nozzle;",
"machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.2 ;intro line with 0.2 mm nozzle",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.04"
],
"nozzle_diameter": [
"0.2"
],
"retraction_length": [
"0.5"
]
}

420
resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json
View File

@@ -1,211 +1,211 @@
{
"type": "machine",
"name": "Thinker X400 0.4 nozzle",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Thinker X400",
"default_print_profile": "0.20mm Standard @Thinker X400",
"default_filament_profile": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF;",
"auxiliary_fan": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"deretraction_speed": [
"30"
],
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "135",
"extruder_clearance_height_to_rod": "40",
"extruder_clearance_radius": "85",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "PRINT_END",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"10000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"12000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"20000"
],
"machine_max_acceleration_y": [
"10000",
"20000"
],
"machine_max_acceleration_z": [
"300",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"machine_max_speed_e": [
"30",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"8",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.4 ;intro line with 0.4 mm nozzle",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"print_host": "192.168.2.2",
"print_host_webui": "",
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "400",
"printer_notes": "",
"printer_settings_id": "Thinker X400 0.4 nozzle",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"template_custom_gcode": "",
"thumbnails": [
"250x250"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.3"
],
"z_hop_types": [
"Auto Lift"
]
}
"type": "machine",
"name": "Thinker X400 0.4 nozzle",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Thinker X400",
"default_print_profile": "0.20mm Standard @Thinker X400",
"default_filament_profile": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF;",
"auxiliary_fan": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"deretraction_speed": [
"30"
],
"enable_filament_ramming": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "135",
"extruder_clearance_height_to_rod": "40",
"extruder_clearance_radius": "85",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "PRINT_END",
"machine_load_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"10000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"12000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"20000"
],
"machine_max_acceleration_y": [
"10000",
"20000"
],
"machine_max_acceleration_z": [
"300",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"machine_max_speed_e": [
"30",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"8",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": "M117 Heating\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nPRINT_START \nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S0\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM117 Heating\nM190 S[bed_temperature_initial_layer_single]\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n;QUAD_GANTRY_LEVEL\nCLEAN_N S=[first_layer_temperature] X=240 Y=-3 A=0 D=0.4\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1 LIFT_SPEED=5\nG28 Z\nM117 Quad Level\n_QUAD_GANTRY_LEVEL horizontal_move_z=5 retry_tolerance=0.05 LIFT_SPEED=5\nM117 Bed Mesh Level\nG1 X132.5 Y197.5\nG28 N\nBED_MESH_CALIBRATE\nM117 Heating\nG1 X275.0 Y0.0 Z0.3 F1500 ; move print head up\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nM117 .\nINTRO_LINE D=0.4 ;intro line with 0.4 mm nozzle",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "92",
"print_host": "192.168.2.2",
"print_host_webui": "",
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "400",
"printer_notes": "",
"printer_settings_id": "Thinker X400 0.4 nozzle",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"template_custom_gcode": "",
"thumbnails": [
"250x250"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.3"
],
"z_hop_types": [
"Auto Lift"
]
}

22
resources/profiles/Eryone/machine/Thinker X400.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Thinker X400",
"model_id": "Thinker-X400",
"nozzle_diameter": "0.4;0.2",
"machine_tech": "FFF",
"family": "Eryone",
"bed_model": "X400_bed.stl",
"bed_texture": "Thinker_texture.png",
"hotend_model": "",
"default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF"
}
"type": "machine_model",
"name": "Thinker X400",
"model_id": "Thinker-X400",
"nozzle_diameter": "0.4;0.2",
"machine_tech": "FFF",
"family": "Eryone",
"bed_model": "X400_bed.stl",
"bed_texture": "Thinker_texture.png",
"hotend_model": "",
"default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF"
}

340
resources/profiles/Eryone/machine/fdm_machine_common.json
View File

@@ -1,171 +1,171 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin2",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all\nQUAD_GANTRY_LEVEL\n\nG28\n\nBED_MESH_CALIBRATE\n\nG1 Y1.0 Z0.3 F1500 ; move print head up\n\nG92 E0.0\n; intro line\nG1 X205.0 E10 F1000\nG1 Y1.6\nG1 X5.0 E15 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X200.0 E20.0 F1000\nG92 E0.0\n",
"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"20000"
],
"machine_max_acceleration_y": [
"10000",
"20000"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"50",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"8",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"printer_notes": "",
"printer_settings_id": "Thinker X400 0.4 nozzle",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"template_custom_gcode": "",
"thumbnails": [
"400x400"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"0.3"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Spiral Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin2",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG28 ; home all\nQUAD_GANTRY_LEVEL\n\nG28\n\nBED_MESH_CALIBRATE\n\nG1 Y1.0 Z0.3 F1500 ; move print head up\n\nG92 E0.0\n; intro line\nG1 X205.0 E10 F1000\nG1 Y1.6\nG1 X5.0 E15 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X200.0 E20.0 F1000\nG92 E0.0\n",
"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"5000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"20000"
],
"machine_max_acceleration_y": [
"10000",
"20000"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_max_speed_e": [
"50",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"8",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"printer_notes": "",
"printer_settings_id": "Thinker X400 0.4 nozzle",
"printer_structure": "undefine",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_apikey": "",
"printhost_authorization_type": "key",
"printhost_cafile": "",
"printhost_password": "",
"printhost_port": "",
"printhost_ssl_ignore_revoke": "0",
"printhost_user": "",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"template_custom_gcode": "",
"thumbnails": [
"400x400"
],
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"0.3"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Spiral Lift"
],
"z_offset": "0"
}

266
resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json
View File

@@ -1,134 +1,134 @@
{
"type": "machine",
"name": "fdm_machine_eryone_ER20_Klipper_common",
"inherits": "fdm_machine_eryone_ER20_common",
"from": "system",
"instantiation": "false",
"auxiliary_fan": "0",
"change_filament_gcode": "M600",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"default_filament_profile": [],
"deretraction_speed": [
"25"
],
"extruder_clearance_dist_to_rod": "56.5",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_max_radius": "68",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"4000"
],
"machine_max_acceleration_extruding": [
"4000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"3500"
],
"machine_max_acceleration_x": [
"3500"
],
"machine_max_acceleration_y": [
"3000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_jerk_e": [
"3"
],
"machine_max_jerk_x": [
"15"
],
"machine_max_jerk_y": [
"15"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_max_speed_e": [
"25"
],
"machine_max_speed_x": [
"250"
],
"machine_max_speed_y": [
"250"
],
"machine_max_speed_z": [
"10"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\n",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "1",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_notes": "optimized Eryone ER20 Klipper configuration with E3D Hotend, BMG directdrive, printable height limited to 190 because of the top of the directdrive and Z-Sync mod",
"nozzle_diameter": [
"0.4"
],
"nozzle_height": "4",
"nozzle_type": "stainless_steel",
"nozzle_volume": "0",
"printable_height": "190",
"printer_variant": "0.5",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"5"
],
"retract_lift_below": [
"190"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_when_changing_layer": [
"0"
],
"retraction_length": [
"0.82"
],
"retraction_speed": [
"25"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"template_custom_gcode": "",
"thumbnails": "48x48/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe_distance": [
"0.3"
],
"z_offset": "0"
}
"type": "machine",
"name": "fdm_machine_eryone_ER20_Klipper_common",
"inherits": "fdm_machine_eryone_ER20_common",
"from": "system",
"instantiation": "false",
"auxiliary_fan": "0",
"change_filament_gcode": "M600",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"default_filament_profile": [],
"deretraction_speed": [
"25"
],
"extruder_clearance_dist_to_rod": "56.5",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_max_radius": "68",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"4000"
],
"machine_max_acceleration_extruding": [
"4000"
],
"machine_max_acceleration_retracting": [
"5000"
],
"machine_max_acceleration_travel": [
"3500"
],
"machine_max_acceleration_x": [
"3500"
],
"machine_max_acceleration_y": [
"3000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_jerk_e": [
"3"
],
"machine_max_jerk_x": [
"15"
],
"machine_max_jerk_y": [
"15"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_max_speed_e": [
"25"
],
"machine_max_speed_x": [
"250"
],
"machine_max_speed_y": [
"250"
],
"machine_max_speed_z": [
"10"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\n",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "1",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_notes": "optimized Eryone ER20 Klipper configuration with E3D Hotend, BMG directdrive, printable height limited to 190 because of the top of the directdrive and Z-Sync mod",
"nozzle_diameter": [
"0.4"
],
"nozzle_height": "4",
"nozzle_type": "stainless_steel",
"nozzle_volume": "0",
"printable_height": "190",
"printer_variant": "0.5",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"5"
],
"retract_lift_below": [
"190"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_when_changing_layer": [
"0"
],
"retraction_length": [
"0.82"
],
"retraction_speed": [
"25"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"template_custom_gcode": "",
"thumbnails": "48x48/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe_distance": [
"0.3"
],
"z_offset": "0"
}

310
resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
View File

@@ -1,156 +1,156 @@
{
"type": "machine",
"name": "fdm_machine_eryone_ER20_common",
"from": "system",
"instantiation": "false",
"auxiliary_fan": "0",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"deretraction_speed": [
"30"
],
"enable_filament_ramming": "0",
"extruder_clearance_height_to_lid": "190",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_max_radius": "68",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin2",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X200 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n",
"machine_max_acceleration_e": [
"1000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"500"
],
"machine_max_acceleration_travel": [
"1800"
],
"machine_max_acceleration_x": [
"1500"
],
"machine_max_acceleration_y": [
"1500"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"12"
],
"machine_max_jerk_y": [
"12"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_max_speed_e": [
"25"
],
"machine_max_speed_x": [
"150"
],
"machine_max_speed_y": [
"150"
],
"machine_max_speed_z": [
"10"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"machine_pause_gcode": "M25 ;pause print",
"machine_start_gcode": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nM140 S[bed_temperature_initial_layer] ; set bed temperature\nM190 S[bed_temperature_initial_layer] ; wait for bed to reach target temperature\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nM104 S[nozzle_temperature_initial_layer] ; set nozzle temperature\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle to reach target temperature\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y2.0 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"nozzle_type": "stainless_steel",
"printable_area": [
"0x0",
"243x0",
"243x220",
"0x220"
],
"printable_height": "200",
"printer_settings_id": "Eryone ER20 common",
"printer_technology": "FFF",
"printer_variant": "0.4",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"5"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"200"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"0"
],
"retraction_length": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"50"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "0",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"template_custom_gcode": "",
"thumbnails": "48x48/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
]
}
"type": "machine",
"name": "fdm_machine_eryone_ER20_common",
"from": "system",
"instantiation": "false",
"auxiliary_fan": "0",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"deretraction_speed": [
"30"
],
"enable_filament_ramming": "0",
"extruder_clearance_height_to_lid": "190",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_max_radius": "68",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin2",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_end_gcode": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X200 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n",
"machine_max_acceleration_e": [
"1000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"500"
],
"machine_max_acceleration_travel": [
"1800"
],
"machine_max_acceleration_x": [
"1500"
],
"machine_max_acceleration_y": [
"1500"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"12"
],
"machine_max_jerk_y": [
"12"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_max_speed_e": [
"25"
],
"machine_max_speed_x": [
"150"
],
"machine_max_speed_y": [
"150"
],
"machine_max_speed_z": [
"10"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"machine_pause_gcode": "M25 ;pause print",
"machine_start_gcode": "G21 ;Metric values\nG90 ;Absolute positioning\nM82 ;Set extruder to absolute mode\nM107 ;Start with the fan off\nM140 S[bed_temperature_initial_layer] ; set bed temperature\nM190 S[bed_temperature_initial_layer] ; wait for bed to reach target temperature\nG28 ;Homing the hotend\nG29 ;Auto bed leveling detecting\nM104 S[nozzle_temperature_initial_layer] ; set nozzle temperature\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle to reach target temperature\nG92 E0 ;Reset the extruded length\nG1 F200 E3 ;Extrude 3mm of filament\nG92 E0 ;Reset the extruded length again\nG1 Y2.0 F1200 ;Move y axis to prime\nG1 X150 F6000 ;Move x axis to prime\nG1 Z0.2 F720 ;Move z axis to prime\nG1 X80.0 E8.0 F900 ;Prime line\nG1 X20.0 E10.0 F700 ;Prime line\nG92 E0 ;Reset the extruded length\nG5 ;Enable resume from power failure\nM117 Printing...\n",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"nozzle_diameter": [
"0.4"
],
"nozzle_type": "stainless_steel",
"printable_area": [
"0x0",
"243x0",
"243x220",
"0x220"
],
"printable_height": "200",
"printer_settings_id": "Eryone ER20 common",
"printer_technology": "FFF",
"printer_variant": "0.4",
"purge_in_prime_tower": "1",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"5"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"200"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"0"
],
"retraction_length": [
"5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"50"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "0",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"template_custom_gcode": "",
"thumbnails": "48x48/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
]
}