mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ABS",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS @0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ABS",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ABS-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ABS-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,78 +1,78 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA11",
|
||||
"filament_id": "EFL81",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA11",
|
||||
"filament_id": "EFL81",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,111 +1,111 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA01",
|
||||
"filament_id": "EFL91",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ABS",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA01",
|
||||
"filament_id": "EFL91",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ASA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ASA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ASA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone ASA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,78 +1,78 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA82",
|
||||
"filament_id": "EFL82",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"180"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA82",
|
||||
"filament_id": "EFL82",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"180"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,81 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA02",
|
||||
"filament_id": "EFL92",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"180"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone ASA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA02",
|
||||
"filament_id": "EFL92",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone ASA"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"180"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,78 +1,78 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA72",
|
||||
"filament_id": "EFL72",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA72",
|
||||
"filament_id": "EFL72",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-GF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA-GF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-GF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-GF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PA-GF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-GF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,75 +1,75 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-GF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA73",
|
||||
"filament_id": "EFL73",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-GF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-GF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA-GF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA73",
|
||||
"filament_id": "EFL73",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA-GF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-GF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,84 +1,84 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA71",
|
||||
"filament_id": "EFL71",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"brim width >= 20;"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA71",
|
||||
"filament_id": "EFL71",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"brim width >= 20;"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PA"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PETG",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PETG",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PETG-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PETG-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,81 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA43",
|
||||
"filament_id": "EFL43",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA43",
|
||||
"filament_id": "EFL43",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA03",
|
||||
"filament_id": "EFL93",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PETG",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA03",
|
||||
"filament_id": "EFL93",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PETG"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PLA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA @0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PLA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PLA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PLA-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,57 +1,57 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA40",
|
||||
"filament_id": "EFL40",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA40",
|
||||
"filament_id": "EFL40",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,39 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA00",
|
||||
"filament_id": "EFL90",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PLA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA00",
|
||||
"filament_id": "EFL90",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PLA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PP @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PP",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP @0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Eryone PP @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PP",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PP-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PP-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PP-CF @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone PP-CF",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP-CF @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,75 +1,75 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PP-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA33",
|
||||
"filament_id": "EFL33",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Printing platform glue spraying"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"160"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PP-CF",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA33",
|
||||
"filament_id": "EFL33",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Printing platform glue spraying"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP-CF"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"160"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,78 +1,78 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone PP",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA43",
|
||||
"filament_id": "EFL43",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Printing platform glue spraying"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"160"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone PP",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA43",
|
||||
"filament_id": "EFL43",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Printing platform glue spraying"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone PP"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"160"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone Silk PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone Silk PLA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Silk PLA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone Silk PLA @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone Silk PLA",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Silk PLA @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,39 +1,39 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone Silk PLA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA041",
|
||||
"filament_id": "EFL941",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA Silk"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Silk PLA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone Silk PLA",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA041",
|
||||
"filament_id": "EFL941",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0\n"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA Silk"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Silk PLA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,249 +1,249 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Standard PLA"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"180"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"3.4"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"2.2"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"3"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone Standard PLA"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"100"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Eryone"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"180"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone TPU @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone TPU",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone TPU @0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Eryone TPU @0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Eryone TPU",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.2 nozzle"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone TPU @0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,48 +1,48 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Eryone TPU",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA05",
|
||||
"filament_id": "EFL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone TPU"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Eryone TPU",
|
||||
"inherits": "Eryone Standard PLA",
|
||||
"from": "system",
|
||||
"setting_id": "EFSA05",
|
||||
"filament_id": "EFL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Thinker X400 0.4 nozzle"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"90"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Eryone TPU"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,132 +1,132 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,91 +1,91 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user