Reduce size by Json Fromatting (#13163)

Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
2026-05-20 03:43:52 +00:00 · 2026-04-15 11:58:12 -03:00
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
--- a/resources/profiles/Elegoo/process/EC/0.08mm
+++ b/resources/profiles/Elegoo/process/EC/0.08mm
@@ -1,8 +1,8 @@
 {
-    "type": "process",
-    "name": "0.08mm Optimal @Elegoo C 0.2 nozzle",
-    "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
-    "instantiation": "true",
-    "elefant_foot_compensation": "0.05",
-    "layer_height": "0.08"
-}
+	"type": "process",
+	"name": "0.08mm Optimal @Elegoo C 0.2 nozzle",
+	"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
+	"instantiation": "true",
+	"elefant_foot_compensation": "0.05",
+	"layer_height": "0.08"
+}
--- a/resources/profiles/Elegoo/process/EC/0.10mm
+++ b/resources/profiles/Elegoo/process/EC/0.10mm
@@ -1,14 +1,14 @@
 {
-    "type": "process",
-    "name": "0.10mm Standard @Elegoo C 0.2 nozzle",
-    "inherits": "fdm_process_ecc_02010",
-    "from": "system",
-    "setting_id": "PEC02010",
-    "instantiation": "true",
-    "sparse_infill_pattern": "zig-zag",
-    "filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
-    "elefant_foot_compensation": "0.15",
-    "compatible_printers": [
-        "Elegoo Centauri 0.2 nozzle"
-    ]
-}
+	"type": "process",
+	"name": "0.10mm Standard @Elegoo C 0.2 nozzle",
+	"inherits": "fdm_process_ecc_02010",
+	"from": "system",
+	"setting_id": "PEC02010",
+	"instantiation": "true",
+	"sparse_infill_pattern": "zig-zag",
+	"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
+	"elefant_foot_compensation": "0.15",
+	"compatible_printers": [
+		"Elegoo Centauri 0.2 nozzle"
+	]
+}
--- a/resources/profiles/Elegoo/process/EC/0.12mm
+++ b/resources/profiles/Elegoo/process/EC/0.12mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.12mm Draft @Elegoo C 0.2 nozzle",
-    "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.12"
-}
+	"type": "process",
+	"name": "0.12mm Draft @Elegoo C 0.2 nozzle",
+	"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.12"
+}
--- a/resources/profiles/Elegoo/process/EC/0.12mm
+++ b/resources/profiles/Elegoo/process/EC/0.12mm
@@ -1,8 +1,8 @@
 {
-    "type": "process",
-    "name": "0.12mm Fine @Elegoo C 0.4 nozzle",
-    "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.12",
-    "wall_loops": "3"
-}
+	"type": "process",
+	"name": "0.12mm Fine @Elegoo C 0.4 nozzle",
+	"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.12",
+	"wall_loops": "3"
+}
--- a/resources/profiles/Elegoo/process/EC/0.14mm
+++ b/resources/profiles/Elegoo/process/EC/0.14mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle",
-    "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.14"
-}
+	"type": "process",
+	"name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle",
+	"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.14"
+}
--- a/resources/profiles/Elegoo/process/EC/0.16mm
+++ b/resources/profiles/Elegoo/process/EC/0.16mm
@@ -1,8 +1,8 @@
 {
-    "type": "process",
-    "name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle",
-    "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
-    "instantiation": "true",
-    "initial_layer_print_height": "0.3",
-    "layer_height": "0.16"
-}
+	"type": "process",
+	"name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle",
+	"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
+	"instantiation": "true",
+	"initial_layer_print_height": "0.3",
+	"layer_height": "0.16"
+}
--- a/resources/profiles/Elegoo/process/EC/0.16mm
+++ b/resources/profiles/Elegoo/process/EC/0.16mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.16mm Optimal @Elegoo C 0.4 nozzle",
-    "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.16"
-}
+	"type": "process",
+	"name": "0.16mm Optimal @Elegoo C 0.4 nozzle",
+	"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.16"
+}
--- a/resources/profiles/Elegoo/process/EC/0.18mm
+++ b/resources/profiles/Elegoo/process/EC/0.18mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.18mm Fine @Elegoo C 0.6 nozzle",
-    "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.18"
-}
+	"type": "process",
+	"name": "0.18mm Fine @Elegoo C 0.6 nozzle",
+	"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.18"
+}
--- a/resources/profiles/Elegoo/process/EC/0.20mm
+++ b/resources/profiles/Elegoo/process/EC/0.20mm
@@ -1,15 +1,15 @@
 {
-    "type": "process",
-    "name": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "inherits": "fdm_process_ecc_04020",
-    "from": "system",
-    "setting_id": "PEC04020",
-    "instantiation": "true",
-    "bottom_shell_layers": "3",
-    "bottom_shell_thickness": "0.6",
-    "sparse_infill_pattern": "zig-zag",
-    "filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
-    "compatible_printers": [
-        "Elegoo Centauri 0.4 nozzle"
-    ]
-}
+	"type": "process",
+	"name": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"inherits": "fdm_process_ecc_04020",
+	"from": "system",
+	"setting_id": "PEC04020",
+	"instantiation": "true",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0.6",
+	"sparse_infill_pattern": "zig-zag",
+	"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Elegoo Centauri 0.4 nozzle"
+	]
+}
--- a/resources/profiles/Elegoo/process/EC/0.20mm
+++ b/resources/profiles/Elegoo/process/EC/0.20mm
@@ -1,13 +1,13 @@
 {
-    "type": "process",
-    "name": "0.20mm Strength @Elegoo C 0.4 nozzle",
-    "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "instantiation": "true",
-    "wall_sequence": "inner-outer-inner wall",
-    "reduce_crossing_wall": "1",
-    "bottom_shell_layers": "5",
-    "outer_wall_speed": "120",
-    "sparse_infill_density": "20%",
-    "top_shell_layers": "6",
-    "wall_loops": "6"
-}
+	"type": "process",
+	"name": "0.20mm Strength @Elegoo C 0.4 nozzle",
+	"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"instantiation": "true",
+	"wall_sequence": "inner-outer-inner wall",
+	"reduce_crossing_wall": "1",
+	"bottom_shell_layers": "5",
+	"outer_wall_speed": "120",
+	"sparse_infill_density": "20%",
+	"top_shell_layers": "6",
+	"wall_loops": "6"
+}
--- a/resources/profiles/Elegoo/process/EC/0.24mm
+++ b/resources/profiles/Elegoo/process/EC/0.24mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.24mm Draft @Elegoo C 0.4 nozzle",
-    "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.24"
-}
+	"type": "process",
+	"name": "0.24mm Draft @Elegoo C 0.4 nozzle",
+	"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.24"
+}
--- a/resources/profiles/Elegoo/process/EC/0.24mm
+++ b/resources/profiles/Elegoo/process/EC/0.24mm
@@ -1,8 +1,8 @@
 {
-    "type": "process",
-    "name": "0.24mm Fine @Elegoo C 0.8 nozzle",
-    "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
-    "instantiation": "true",
-    "initial_layer_print_height": "0.3",
-    "layer_height": "0.24"
-}
+	"type": "process",
+	"name": "0.24mm Fine @Elegoo C 0.8 nozzle",
+	"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
+	"instantiation": "true",
+	"initial_layer_print_height": "0.3",
+	"layer_height": "0.24"
+}
--- a/resources/profiles/Elegoo/process/EC/0.24mm
+++ b/resources/profiles/Elegoo/process/EC/0.24mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.24mm Optimal @Elegoo C 0.6 nozzle",
-    "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.24"
-}
+	"type": "process",
+	"name": "0.24mm Optimal @Elegoo C 0.6 nozzle",
+	"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.24"
+}
--- a/resources/profiles/Elegoo/process/EC/0.28mm
+++ b/resources/profiles/Elegoo/process/EC/0.28mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle",
-    "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.28"
-}
+	"type": "process",
+	"name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle",
+	"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.28"
+}
--- a/resources/profiles/Elegoo/process/EC/0.30mm
+++ b/resources/profiles/Elegoo/process/EC/0.30mm
@@ -1,13 +1,13 @@
 {
-    "type": "process",
-    "name": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "inherits": "fdm_process_ecc_06030",
-    "from": "system",
-    "setting_id": "PEC06030",
-    "instantiation": "true",
-    "sparse_infill_pattern": "zig-zag",
-    "filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
-    "compatible_printers": [
-        "Elegoo Centauri 0.6 nozzle"
-    ]
-}
+	"type": "process",
+	"name": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"inherits": "fdm_process_ecc_06030",
+	"from": "system",
+	"setting_id": "PEC06030",
+	"instantiation": "true",
+	"sparse_infill_pattern": "zig-zag",
+	"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Elegoo Centauri 0.6 nozzle"
+	]
+}
--- a/resources/profiles/Elegoo/process/EC/0.30mm
+++ b/resources/profiles/Elegoo/process/EC/0.30mm
@@ -1,13 +1,13 @@
 {
-    "type": "process",
-    "name": "0.30mm Strength @Elegoo C 0.6 nozzle",
-    "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "instantiation": "true",
-    "inner_wall_speed": "120",
-    "wall_sequence": "inner-outer-inner wall",
-    "reduce_crossing_wall": "1",
-    "outer_wall_speed": "80",
-    "sparse_infill_density": "15%",
-    "top_surface_speed": "120",
-    "wall_loops": "4"
-}
+	"type": "process",
+	"name": "0.30mm Strength @Elegoo C 0.6 nozzle",
+	"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"instantiation": "true",
+	"inner_wall_speed": "120",
+	"wall_sequence": "inner-outer-inner wall",
+	"reduce_crossing_wall": "1",
+	"outer_wall_speed": "80",
+	"sparse_infill_density": "15%",
+	"top_surface_speed": "120",
+	"wall_loops": "4"
+}
--- a/resources/profiles/Elegoo/process/EC/0.32mm
+++ b/resources/profiles/Elegoo/process/EC/0.32mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.32mm Optimal @Elegoo C 0.8 nozzle",
-    "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.32"
-}
+	"type": "process",
+	"name": "0.32mm Optimal @Elegoo C 0.8 nozzle",
+	"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.32"
+}
--- a/resources/profiles/Elegoo/process/EC/0.36mm
+++ b/resources/profiles/Elegoo/process/EC/0.36mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.36mm Draft @Elegoo C 0.6 nozzle",
-    "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.36"
-}
+	"type": "process",
+	"name": "0.36mm Draft @Elegoo C 0.6 nozzle",
+	"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.36"
+}
--- a/resources/profiles/Elegoo/process/EC/0.40mm
+++ b/resources/profiles/Elegoo/process/EC/0.40mm
@@ -1,13 +1,13 @@
 {
-    "type": "process",
-    "name": "0.40mm Standard @Elegoo C 0.8 nozzle",
-    "inherits": "fdm_process_ecc_08040",
-    "from": "system",
-    "setting_id": "PEC08040",
-    "instantiation": "true",
-    "sparse_infill_pattern": "zig-zag",
-    "filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
-    "compatible_printers": [
-        "Elegoo Centauri 0.8 nozzle"
-    ]
-}
+	"type": "process",
+	"name": "0.40mm Standard @Elegoo C 0.8 nozzle",
+	"inherits": "fdm_process_ecc_08040",
+	"from": "system",
+	"setting_id": "PEC08040",
+	"instantiation": "true",
+	"sparse_infill_pattern": "zig-zag",
+	"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Elegoo Centauri 0.8 nozzle"
+	]
+}
--- a/resources/profiles/Elegoo/process/EC/0.42mm
+++ b/resources/profiles/Elegoo/process/EC/0.42mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle",
-    "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.42"
-}
+	"type": "process",
+	"name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle",
+	"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.42"
+}
--- a/resources/profiles/Elegoo/process/EC/0.48mm
+++ b/resources/profiles/Elegoo/process/EC/0.48mm
@@ -1,7 +1,7 @@
 {
-    "type": "process",
-    "name": "0.48mm Draft @Elegoo C 0.8 nozzle",
-    "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
-    "instantiation": "true",
-    "layer_height": "0.48"
-}
+	"type": "process",
+	"name": "0.48mm Draft @Elegoo C 0.8 nozzle",
+	"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
+	"instantiation": "true",
+	"layer_height": "0.48"
+}