mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"225x0",
|
||||
"225x225",
|
||||
"0x225"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,124 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,124 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,124 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,124 +1,124 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Max",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"420x0",
|
||||
"420x420",
|
||||
"0x420"
|
||||
],
|
||||
"printable_height": "480",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.7"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Max",
|
||||
"model_id": "Elegoo-Neptune-4-Max",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Max",
|
||||
"model_id": "Elegoo-Neptune-4-Max",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Plus",
|
||||
"printer_notes": "",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"320x0",
|
||||
"320x320",
|
||||
"0x320"
|
||||
],
|
||||
"printable_height": "385",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"enable_filament_ramming": "1",
|
||||
"parking_pos_retraction": "92",
|
||||
"auxiliary_fan": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "380",
|
||||
"extruder_clearance_height_to_rod": "10",
|
||||
"extruder_clearance_radius": "60",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"7000",
|
||||
"7000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"25",
|
||||
"12"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.20"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"use_firmwware_retraction": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"manual_filament_change": "1",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Plus",
|
||||
"model_id": "Elegoo-Neptune-4-Plus",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4plus_buildplate_texture.png",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Plus",
|
||||
"model_id": "Elegoo-Neptune-4-Plus",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4plus_buildplate_texture.png",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,60 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
|
||||
"gcode_flavor": "klipper",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,120 +1,120 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"gcode_flavor": "klipper",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
|
||||
"inherits": "fdm_neptune_4_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Elegoo Neptune 4 Pro",
|
||||
"gcode_flavor": "klipper",
|
||||
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x230",
|
||||
"0x230"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Elegoo",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"85%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
|
||||
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Pro",
|
||||
"model_id": "Elegoo-Neptune-4-Pro",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4pro_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4 Pro",
|
||||
"model_id": "Elegoo-Neptune-4-Pro",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4pro_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4",
|
||||
"model_id": "Elegoo-Neptune-4",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Neptune 4",
|
||||
"model_id": "Elegoo-Neptune-4",
|
||||
"nozzle_diameter": "0.2;0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_neptune4_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_neptune4_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
|
||||
}
|
||||
|
||||
@@ -1,145 +1,145 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_neptune_4_common",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"thumbnails": [
|
||||
"320x320/PNG",
|
||||
"32x32/COLPIC",
|
||||
"160x160/COLPIC"
|
||||
],
|
||||
"thumbnails_format": "PNG"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_neptune_4_common",
|
||||
"inherits": "fdm_elegoo_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "280",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @Elegoo"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "",
|
||||
"machine_end_gcode": "",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"thumbnails": [
|
||||
"320x320/PNG",
|
||||
"32x32/COLPIC",
|
||||
"160x160/COLPIC"
|
||||
],
|
||||
"thumbnails_format": "PNG"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user