mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC202",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC202",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,83 +1,83 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_3dp_001_common",
|
||||
"from": "system",
|
||||
"setting_id": "ECC204",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "256",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-10",
|
||||
"256x-10",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x1.5"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"manual_filament_change": "0",
|
||||
"auto_toolchange_command": "0",
|
||||
"purge_in_prime_tower": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_pause_gcode": "M600",
|
||||
"support_multi_filament": "1",
|
||||
"support_wan_network": "1",
|
||||
"bed_mesh_max": "243,245",
|
||||
"bed_mesh_min": "10,10",
|
||||
"bed_mesh_probe_distance": "22,22",
|
||||
"disable_m73": "0",
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"9"
|
||||
],
|
||||
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2025-10-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
|
||||
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\n",
|
||||
"machine_end_gcode": ";===== CC&CC2_END_GCODE ================\n;===== date: 2025-10-16-001 =====================\n\nM104 S0\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM84\n",
|
||||
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2025-11-06-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0.5"
|
||||
]
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"inherits": "fdm_elegoo_3dp_001_common",
|
||||
"from": "system",
|
||||
"setting_id": "ECC204",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"host_type": "elegoolink",
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"256x0",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"printable_height": "256",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"bed_texture_area": [
|
||||
"0x-10",
|
||||
"256x-10",
|
||||
"256x256",
|
||||
"0x256"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x1.5"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"manual_filament_change": "0",
|
||||
"auto_toolchange_command": "0",
|
||||
"purge_in_prime_tower": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_pause_gcode": "M600",
|
||||
"support_multi_filament": "1",
|
||||
"support_wan_network": "1",
|
||||
"bed_mesh_max": "243,245",
|
||||
"bed_mesh_min": "10,10",
|
||||
"bed_mesh_probe_distance": "22,22",
|
||||
"disable_m73": "0",
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"9"
|
||||
],
|
||||
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2025-10-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
|
||||
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\n",
|
||||
"machine_end_gcode": ";===== CC&CC2_END_GCODE ================\n;===== date: 2025-10-16-001 =====================\n\nM104 S0\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM84\n",
|
||||
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2025-11-06-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0.5"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC206",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC206",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.8 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC208",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 2 0.8 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC208",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon 2",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC2"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri Carbon 2",
|
||||
"model_id": "Elegoo-CC2",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri Carbon 2",
|
||||
"model_id": "Elegoo-CC2",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user