juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-19 11:23:42 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reduce size by Json Fromatting (#13163)

Browse Source 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
2026-04-15 11:58:12 -03:00
committed by GitHub
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

62
resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.2 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri 0.2 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC02",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}
"type": "machine",
"name": "Elegoo Centauri 0.2 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC02",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}

112
resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.4 nozzle.json
View File

@@ -1,57 +1,57 @@
{
"type": "machine",
"name": "Elegoo Centauri 0.4 nozzle",
"inherits": "fdm_machine_ecc",
"from": "system",
"setting_id": "EC04",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"257x0",
"257x257",
"0x257"
],
"printable_height": "257",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
"extruder_offset": [
"0x0"
],
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"default_bed_type": "4",
"upward_compatible_machine": [],
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
"machine_pause_gcode": "M600",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
}
"type": "machine",
"name": "Elegoo Centauri 0.4 nozzle",
"inherits": "fdm_machine_ecc",
"from": "system",
"setting_id": "EC04",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"257x0",
"257x257",
"0x257"
],
"printable_height": "257",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
"extruder_offset": [
"0x0"
],
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"default_bed_type": "4",
"upward_compatible_machine": [],
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
"machine_pause_gcode": "M600",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
}

62
resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.6 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri 0.6 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.30mm Standard @Elegoo C 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}
"type": "machine",
"name": "Elegoo Centauri 0.6 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.30mm Standard @Elegoo C 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}

68
resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.8 nozzle.json
View File

@@ -1,35 +1,35 @@
{
"type": "machine",
"name": "Elegoo Centauri 0.8 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.40mm Standard @Elegoo C 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}
"type": "machine",
"name": "Elegoo Centauri 0.8 nozzle",
"inherits": "Elegoo Centauri 0.4 nozzle",
"from": "system",
"setting_id": "EC08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @EC"
],
"default_print_profile": "0.40mm Standard @Elegoo C 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}

22
resources/profiles/Elegoo/machine/EC/Elegoo Centauri.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Centauri",
"model_id": "Elegoo-C",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_buildplate_model.stl",
"bed_texture": "elegoo_centuri_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
}
"type": "machine_model",
"name": "Elegoo Centauri",
"model_id": "Elegoo-C",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_buildplate_model.stl",
"bed_texture": "elegoo_centuri_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
}

62
resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.2 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 0.2 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC02",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 0.2 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC02",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}

112
resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json
View File

@@ -1,57 +1,57 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 0.4 nozzle",
"inherits": "fdm_machine_ecc",
"from": "system",
"setting_id": "ECC04",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"257x0",
"257x257",
"0x257"
],
"printable_height": "257",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
"extruder_offset": [
"0x0"
],
"default_bed_type": "4",
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"upward_compatible_machine": [],
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
"machine_pause_gcode": "M600",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
}
"type": "machine",
"name": "Elegoo Centauri Carbon 0.4 nozzle",
"inherits": "fdm_machine_ecc",
"from": "system",
"setting_id": "ECC04",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"257x0",
"257x257",
"0x257"
],
"printable_height": "257",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
"extruder_offset": [
"0x0"
],
"default_bed_type": "4",
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"upward_compatible_machine": [],
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
"machine_pause_gcode": "M600",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
}

62
resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.6 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 0.6 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.30mm Standard @Elegoo CC 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 0.6 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.30mm Standard @Elegoo CC 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}

68
resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.8 nozzle.json
View File

@@ -1,35 +1,35 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 0.8 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.40mm Standard @Elegoo CC 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 0.8 nozzle",
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
"from": "system",
"setting_id": "ECC08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri Carbon",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @ECC"
],
"default_print_profile": "0.40mm Standard @Elegoo CC 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}

22
resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Centauri Carbon",
"model_id": "Elegoo-CC",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC;Elegoo Rapid PETG+;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC;Elegoo TPU 95A @ECC"
}
"type": "machine_model",
"name": "Elegoo Centauri Carbon",
"model_id": "Elegoo-CC",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC;Elegoo Rapid PETG+;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC;Elegoo TPU 95A @ECC"
}

282
resources/profiles/Elegoo/machine/ECC/fdm_machine_ecc.json
View File

@@ -1,142 +1,142 @@
{
"type": "machine",
"name": "fdm_machine_ecc",
"inherits": "fdm_machine_ecc_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"auxiliary_fan": "1",
"bed_exclude_area": [
"0x0"
],
"default_filament_profile": [
"Elegoo PLA"
],
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
"extruder_colour": [
"#018001"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"retract_lift_below": [
"249"
],
"extruder_clearance_max_radius": "68",
"extruder_clearance_height_to_lid": "90",
"nozzle_volume": "107",
"printer_structure": "corexy",
"best_object_pos": "0.5x0.5",
"retraction_minimum_travel": [
"0.8"
],
"retract_before_wipe": [
"0%"
],
"wipe_distance": [
"1.2"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"320x320",
"160x160"
],
"thumbnails_format": "PNG",
"nozzle_type": "brass",
"single_extruder_multi_material": "1",
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
"change_filament_gcode": "",
"machine_pause_gcode": "M600"
}
"type": "machine",
"name": "fdm_machine_ecc",
"inherits": "fdm_machine_ecc_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"auxiliary_fan": "1",
"bed_exclude_area": [
"0x0"
],
"default_filament_profile": [
"Elegoo PLA"
],
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
"extruder_colour": [
"#018001"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"retract_lift_below": [
"249"
],
"extruder_clearance_max_radius": "68",
"extruder_clearance_height_to_lid": "90",
"nozzle_volume": "107",
"printer_structure": "corexy",
"best_object_pos": "0.5x0.5",
"retraction_minimum_travel": [
"0.8"
],
"retract_before_wipe": [
"0%"
],
"wipe_distance": [
"1.2"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"320x320",
"160x160"
],
"thumbnails_format": "PNG",
"nozzle_type": "brass",
"single_extruder_multi_material": "1",
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
"change_filament_gcode": "",
"machine_pause_gcode": "M600"
}

258
resources/profiles/Elegoo/machine/ECC/fdm_machine_ecc_common.json
View File

@@ -1,130 +1,130 @@
{
"type": "machine",
"name": "fdm_machine_ecc_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"support_chamber_temp_control": "0",
"printer_technology": "FFF",
"printer_notes": "",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"10000"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"10000"
],
"machine_max_acceleration_y": [
"10000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"3"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"printer_settings_id": "Elegoo",
"disable_m73": "1",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"cooling_tube_retraction": "90",
"parking_pos_retraction": "90",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"wipe": [
"1"
],
"z_hop_types": [
"Auto Lift"
],
"default_filament_profile": [],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"layer_change_gcode": "",
"machine_start_gcode": "",
"machine_end_gcode": "",
"change_filament_gcode": "",
"purge_in_prime_tower": "0",
"manual_filament_change": "1",
"enable_filament_ramming": "0"
}
"type": "machine",
"name": "fdm_machine_ecc_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"support_chamber_temp_control": "0",
"printer_technology": "FFF",
"printer_notes": "",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"10000"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"10000"
],
"machine_max_acceleration_y": [
"10000"
],
"machine_max_acceleration_z": [
"100"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"3"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"printer_settings_id": "Elegoo",
"disable_m73": "1",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"cooling_tube_retraction": "90",
"parking_pos_retraction": "90",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"wipe": [
"1"
],
"z_hop_types": [
"Auto Lift"
],
"default_filament_profile": [],
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"layer_change_gcode": "",
"machine_start_gcode": "",
"machine_end_gcode": "",
"change_filament_gcode": "",
"purge_in_prime_tower": "0",
"manual_filament_change": "1",
"enable_filament_ramming": "0"
}

62
resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.2 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.2 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC202",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.2 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC202",
"instantiation": "true",
"nozzle_diameter": [
"0.2"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.2",
"default_filament_profile": [
"Elegoo PLA @0.2 nozzle"
],
"default_print_profile": "0.10mm Standard @Elegoo CC2 0.2 nozzle",
"retraction_minimum_travel": [
"0.4"
],
"wipe_distance": [
"0.8"
],
"retraction_length": [
"0.5"
],
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.06"
]
}

162
resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.4 nozzle.json
View File

@@ -1,83 +1,83 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.4 nozzle",
"inherits": "fdm_elegoo_3dp_001_common",
"from": "system",
"setting_id": "ECC204",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"host_type": "elegoolink",
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"printable_height": "256",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"bed_texture_area": [
"0x-10",
"256x-10",
"256x256",
"0x256"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
"extruder_offset": [
"0x1.5"
],
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"upward_compatible_machine": [],
"manual_filament_change": "0",
"auto_toolchange_command": "0",
"purge_in_prime_tower": "0",
"gcode_flavor": "klipper",
"machine_pause_gcode": "M600",
"support_multi_filament": "1",
"support_wan_network": "1",
"bed_mesh_max": "243,245",
"bed_mesh_min": "10,10",
"bed_mesh_probe_distance": "22,22",
"disable_m73": "0",
"machine_max_jerk_x": [
"20",
"9"
],
"machine_max_jerk_y": [
"20",
"9"
],
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2025-10-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\n",
"machine_end_gcode": ";===== CC&CC2_END_GCODE ================\n;===== date: 2025-10-16-001 =====================\n\nM104 S0\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM84\n",
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2025-11-06-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"retract_restart_extra_toolchange": [
"0.5"
]
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.4 nozzle",
"inherits": "fdm_elegoo_3dp_001_common",
"from": "system",
"setting_id": "ECC204",
"instantiation": "true",
"nozzle_diameter": [
"0.4"
],
"host_type": "elegoolink",
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.4",
"auxiliary_fan": "1",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"printable_height": "256",
"retract_lift_below": [
"255"
],
"bed_exclude_area": [
"246x0",
"256x0",
"256x20",
"246x20"
],
"bed_texture_area": [
"0x-10",
"256x-10",
"256x256",
"0x256"
],
"thumbnails": [
"144x144"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.20mm Standard @Elegoo CC2 0.4 nozzle",
"extruder_offset": [
"0x1.5"
],
"fan_speedup_time": "0.5",
"machine_load_filament_time": "29",
"machine_unload_filament_time": "28",
"nozzle_type": "hardened_steel",
"scan_first_layer": "1",
"upward_compatible_machine": [],
"manual_filament_change": "0",
"auto_toolchange_command": "0",
"purge_in_prime_tower": "0",
"gcode_flavor": "klipper",
"machine_pause_gcode": "M600",
"support_multi_filament": "1",
"support_wan_network": "1",
"bed_mesh_max": "243,245",
"bed_mesh_min": "10,10",
"bed_mesh_probe_distance": "22,22",
"disable_m73": "0",
"machine_max_jerk_x": [
"20",
"9"
],
"machine_max_jerk_y": [
"20",
"9"
],
"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2025-10-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\n",
"machine_end_gcode": ";===== CC&CC2_END_GCODE ================\n;===== date: 2025-10-16-001 =====================\n\nM104 S0\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM84\n",
"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2025-11-06-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"retract_restart_extra_toolchange": [
"0.5"
]
}

62
resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.6 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.6 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC206",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.6 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC206",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.30mm Standard @Elegoo CC2 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}

68
resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.8 nozzle.json
View File

@@ -1,35 +1,35 @@
{
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.8 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC208",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}
"type": "machine",
"name": "Elegoo Centauri Carbon 2 0.8 nozzle",
"inherits": "Elegoo Centauri Carbon 2 0.4 nozzle",
"from": "system",
"setting_id": "ECC208",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo Centauri Carbon 2",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @ECC2"
],
"default_print_profile": "0.40mm Standard @Elegoo CC2 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"retract_length_toolchange": [
"3"
]
}

20
resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Centauri Carbon 2",
"model_id": "Elegoo-CC2",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
"type": "machine_model",
"name": "Elegoo Centauri Carbon 2",
"model_id": "Elegoo-CC2",
"nozzle_diameter": "0.4;0.2;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
}

226
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune",
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "200",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune",
"default_print_profile": "0.20mm Standard @Elegoo Neptune",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "200",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

226
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 2 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 2 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 2",
"model_id": "Elegoo-Neptune-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2_buildplate_model.stl",
"bed_texture": "elegoo_neptune2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 2",
"model_id": "Elegoo-Neptune-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2_buildplate_model.stl",
"bed_texture": "elegoo_neptune2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

260
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json
View File

@@ -1,131 +1,131 @@
{
"type": "machine",
"name": "Elegoo Neptune 2D 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2D",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
"extruder_colour": [
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0"
],
"nozzle_diameter": [
"0.4",
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"5",
"5"
],
"retraction_speed": [
"60",
"60"
],
"retract_length_toolchange": [
"1",
"1"
],
"deretraction_speed": [
"40",
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 2D 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2D",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2D",
"extruder_colour": [
"#FCE94F",
"#FCE94F"
],
"extruder_offset": [
"0x0",
"0x0"
],
"nozzle_diameter": [
"0.4",
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32",
"0.32"
],
"min_layer_height": [
"0.08",
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2",
"2"
],
"retract_before_wipe": [
"70%",
"70%"
],
"retraction_length": [
"5",
"5"
],
"retraction_speed": [
"60",
"60"
],
"retract_length_toolchange": [
"1",
"1"
],
"deretraction_speed": [
"40",
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 2D",
"model_id": "Elegoo-Neptune-2D",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2d_buildplate_model.stl",
"bed_texture": "elegoo_neptune2d_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 2D",
"model_id": "Elegoo-Neptune-2D",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2d_buildplate_model.stl",
"bed_texture": "elegoo_neptune2d_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

226
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 2S 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2S",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 2S 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 2S",
"default_print_profile": "0.20mm Standard @Elegoo Neptune2S",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 2S",
"model_id": "Elegoo-Neptune-2S",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2s_buildplate_model.stl",
"bed_texture": "elegoo_neptune2s_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 2S",
"model_id": "Elegoo-Neptune-2S",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune2s_buildplate_model.stl",
"bed_texture": "elegoo_neptune2s_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

220
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json
View File

@@ -1,111 +1,111 @@
{
"type": "machine",
"name": "Elegoo Neptune 3 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 3 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 3",
"model_id": "Elegoo-Neptune-3",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3_buildplate_model.stl",
"bed_texture": "elegoo_neptune3_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 3",
"model_id": "Elegoo-Neptune-3",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3_buildplate_model.stl",
"bed_texture": "elegoo_neptune3_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

226
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune X 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune X",
"default_print_profile": "0.20mm Standard @Elegoo NeptuneX",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune X 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune X",
"default_print_profile": "0.20mm Standard @Elegoo NeptuneX",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"1"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune X",
"model_id": "Elegoo-Neptune-X",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptunex_buildplate_model.stl",
"bed_texture": "elegoo_neptunex_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune X",
"model_id": "Elegoo-Neptune-X",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptunex_buildplate_model.stl",
"bed_texture": "elegoo_neptunex_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

22
resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune",
"model_id": "Elegoo-Neptune",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune_buildplate_model.stl",
"bed_texture": "elegoo_neptune_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune",
"model_id": "Elegoo-Neptune",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune_buildplate_model.stl",
"bed_texture": "elegoo_neptune_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

226
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Max",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 3 Max 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Max",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Max",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 3 Max",
"model_id": "Elegoo-Neptune-3-Max",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3max_buildplate_model.stl",
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 3 Max",
"model_id": "Elegoo-Neptune-3-Max",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3max_buildplate_model.stl",
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

226
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Plus",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 3 Plus 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Plus",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Plus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 3 Plus",
"model_id": "Elegoo-Neptune-3-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune3plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 3 Plus",
"model_id": "Elegoo-Neptune-3-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune3plus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

226
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 3 Pro 0.4 nozzle",
"inherits": "fdm_elegoo_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 3 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune3Pro",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "280",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"25"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M0",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 3 Pro",
"model_id": "Elegoo-Neptune-3-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune3pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 3 Pro",
"model_id": "Elegoo-Neptune-3-Pro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune3pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune3pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic ABS @Elegoo;Generic PETG @Elegoo;Generic PLA @Elegoo"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.2 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.4 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.6 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 (0.8 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"225x0",
"225x225",
"0x225"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

246
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.2 nozzle).json
View File

@@ -1,124 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

246
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.4 nozzle).json
View File

@@ -1,124 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

246
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.6 nozzle).json
View File

@@ -1,124 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

246
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max (0.8 nozzle).json
View File

@@ -1,124 +1,124 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Max (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Max",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "480",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "34",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_radius": "47",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.7"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

28
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max.json
View File

@@ -1,15 +1,15 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Max",
"model_id": "Elegoo-Neptune-4-Max",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 4 Max",
"model_id": "Elegoo-Neptune-4-Max",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4max_buildplate_model.stl",
"bed_texture": "elegoo_neptune_max_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

336
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.2 nozzle).json
View File

@@ -1,169 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.15"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

336
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.4 nozzle).json
View File

@@ -1,169 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

336
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.6 nozzle).json
View File

@@ -1,169 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.48"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

336
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus (0.8 nozzle).json
View File

@@ -1,169 +1,169 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Plus (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Plus",
"printer_notes": "",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "385",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"cooling_tube_length": "5",
"cooling_tube_retraction": "91.5",
"enable_filament_ramming": "1",
"parking_pos_retraction": "92",
"auxiliary_fan": "1",
"extra_loading_move": "-2",
"extruder_clearance_height_to_lid": "380",
"extruder_clearance_height_to_rod": "10",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_load_filament_time": "0",
"machine_unload_filament_time": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"7000",
"7000"
],
"machine_max_acceleration_retracting": [
"7000",
"7000"
],
"machine_max_acceleration_travel": [
"7000",
"7000"
],
"machine_max_acceleration_x": [
"7000",
"7000"
],
"machine_max_acceleration_y": [
"7000",
"7000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_speed_e": [
"60",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"25",
"12"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.64"
],
"min_layer_height": [
"0.20"
],
"printer_settings_id": "Elegoo",
"retract_before_wipe": [
"85%"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"0"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"45"
],
"use_firmwware_retraction": "0",
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Normal Lift"
],
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

28
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus.json
View File

@@ -1,15 +1,15 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Plus",
"model_id": "Elegoo-Neptune-4-Plus",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune4plus_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 4 Plus",
"model_id": "Elegoo-Neptune-4-Plus",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4plus_buildplate_model.stl",
"bed_texture": "elegoo_neptune4plus_buildplate_texture.png",
"bed_exclude_area": [
"0x0"
],
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.2 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.2 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.2"
],
"printer_variant": "0.2",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.16"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.4 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.4 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

118
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.6 nozzle).json
View File

@@ -1,60 +1,60 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.6 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)",
"gcode_flavor": "klipper",
"nozzle_diameter": [
"0.6"
],
"printer_variant": "0.6",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"max_layer_height": [
"0.4"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"2.5"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

238
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro (0.8 nozzle).json
View File

@@ -1,120 +1,120 @@
{
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Elegoo Neptune 4 Pro (0.8 nozzle)",
"inherits": "fdm_neptune_4_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Elegoo Neptune 4 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)",
"nozzle_diameter": [
"0.8"
],
"printer_variant": "0.8",
"printable_area": [
"0x0",
"235x0",
"235x230",
"0x230"
],
"printable_height": "265",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"max_layer_height": [
"0.6"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Elegoo",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"85%"
],
"retraction_length": [
"0.8"
],
"retraction_speed": [
"60"
],
"retract_length_toolchange": [
"2"
],
"deretraction_speed": [
"45"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4 Pro",
"model_id": "Elegoo-Neptune-4-Pro",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune4pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 4 Pro",
"model_id": "Elegoo-Neptune-4-Pro",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4pro_buildplate_model.stl",
"bed_texture": "elegoo_neptune4pro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

22
resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo Neptune 4",
"model_id": "Elegoo-Neptune-4",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4_buildplate_model.stl",
"bed_texture": "elegoo_neptune4_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}
"type": "machine_model",
"name": "Elegoo Neptune 4",
"model_id": "Elegoo-Neptune-4",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"machine_tech": "FFF",
"family": "Elegoo",
"bed_model": "elegoo_neptune4_buildplate_model.stl",
"bed_texture": "elegoo_neptune4_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Generic PLA @Elegoo;Generic PETG @Elegoo;Generic ABS @Elegoo"
}

288
resources/profiles/Elegoo/machine/EN4SERIES/fdm_neptune_4_common.json
View File

@@ -1,145 +1,145 @@
{
"type": "machine",
"name": "fdm_neptune_4_common",
"inherits": "fdm_elegoo_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"10000",
"10000"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"thumbnails": [
"320x320/PNG",
"32x32/COLPIC",
"160x160/COLPIC"
],
"thumbnails_format": "PNG"
}
"type": "machine",
"name": "fdm_neptune_4_common",
"inherits": "fdm_elegoo_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "klipper",
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"10000",
"10000"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"thumbnails": [
"320x320/PNG",
"32x32/COLPIC",
"160x160/COLPIC"
],
"thumbnails_format": "PNG"
}

182
resources/profiles/Elegoo/machine/EOSGIGA/Elegoo OrangeStorm Giga 0.4 nozzle.json
View File

@@ -1,92 +1,92 @@
{
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.4 nozzle",
"inherits": "fdm_elegoo_3dp_001_common",
"from": "system",
"setting_id": "EOSG04",
"instantiation": "true",
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.4",
"printer_structure": "i3",
"default_print_profile": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"810x0",
"810x805",
"0x805"
],
"printable_height": [
"1010"
],
"retract_lift_below": [
"1010"
],
"auxiliary_fan": "0",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"machine_load_filament_time": "25",
"machine_max_acceleration_extruding": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"5000",
"5000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"3",
"3"
],
"machine_max_speed_z": [
"30",
"30"
],
"retraction_speed": [
"45"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"60",
"60"
],
"extruder_clearance_height_to_lid": "120",
"extruder_clearance_height_to_rod": "65",
"extruder_clearance_radius": "65",
"fan_speedup_time": "0.5",
"thumbnails_format": "COLPIC",
"thumbnails": [
"400x400/COLPIC",
"114x114/COLPIC",
"160x160/PNG"
],
"machine_unload_filament_time": "29",
"nozzle_height": "4.76",
"nozzle_volume": "125",
"scan_first_layer": "0",
"time_lapse_gcode": "",
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;Machine_use_extruders:1\n;TIME:\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.75-50} Y0.5 F6000\n;\n;Giga zoned hot bed control\n;Case 1\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.75+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.75+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X30 Y30 Z{min(max_layer_z+200, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"layer_change_gcode": ";LAYER:{layer_num+1}\n{if layer_num > 0 and layer_num < 3}\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n\n{endif}"
}
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.4 nozzle",
"inherits": "fdm_elegoo_3dp_001_common",
"from": "system",
"setting_id": "EOSG04",
"instantiation": "true",
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.4",
"printer_structure": "i3",
"default_print_profile": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"810x0",
"810x805",
"0x805"
],
"printable_height": [
"1010"
],
"retract_lift_below": [
"1010"
],
"auxiliary_fan": "0",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"machine_load_filament_time": "25",
"machine_max_acceleration_extruding": [
"5000",
"5000"
],
"machine_max_acceleration_x": [
"5000",
"5000"
],
"machine_max_acceleration_y": [
"5000",
"5000"
],
"machine_max_acceleration_z": [
"300",
"300"
],
"machine_max_acceleration_travel": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"3",
"3"
],
"machine_max_speed_z": [
"30",
"30"
],
"retraction_speed": [
"45"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"60",
"60"
],
"extruder_clearance_height_to_lid": "120",
"extruder_clearance_height_to_rod": "65",
"extruder_clearance_radius": "65",
"fan_speedup_time": "0.5",
"thumbnails_format": "COLPIC",
"thumbnails": [
"400x400/COLPIC",
"114x114/COLPIC",
"160x160/PNG"
],
"machine_unload_filament_time": "29",
"nozzle_height": "4.76",
"nozzle_volume": "125",
"scan_first_layer": "0",
"time_lapse_gcode": "",
"gcode_flavor": "klipper",
"change_filament_gcode": "M600",
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": ";;===== date: 20240520 =====================\n;Machine_use_extruders:1\n;TIME:\nM400 ; wait for buffer to clear\n;[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type={curr_bed_type}\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG90\nG28 ;home\nG1 Z10 F300\nG1 X{print_bed_max[0]*0.75-50} Y0.5 F6000\n;\n;Giga zoned hot bed control\n;Case 1\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM190 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM190 T2 S[bed_temperature_initial_layer_single]\n{endif}\nG1 Z0.4 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X{print_bed_max[0]*0.75+50} E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X{print_bed_max[0]*0.75+47} F3000\nG92 E0 ;Reset Extruder\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
"machine_end_gcode": ";PRINT_END\nG90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X30 Y30 Z{min(max_layer_z+200, printable_height)} E-5 F{travel_speed*60} ; Move print head up\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
"layer_change_gcode": ";LAYER:{layer_num+1}\n{if layer_num > 0 and layer_num < 3}\n;Giga zoned hot bed control\n;Case 1\nM140 S0\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T0 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T1 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{endif}\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405 && ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 2\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) < 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T3 S[bed_temperature_initial_layer_single]\n{if ((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) > 405}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 3\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) < 402.5}\nM140 T1 S[bed_temperature_initial_layer_single]\n{if ((first_layer_print_max[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n{endif}\n\n;Case 4\n{if (min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) > 405 && (max(0, first_layer_print_min[1])) > 402.5}\nM140 T2 S[bed_temperature_initial_layer_single]\n{endif}\n\n{endif}"
}

62
resources/profiles/Elegoo/machine/EOSGIGA/Elegoo OrangeStorm Giga 0.6 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.6 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.6 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG06",
"instantiation": "true",
"nozzle_diameter": [
"0.6"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.6",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
"retraction_minimum_travel": [
"1.2"
],
"wipe_distance": [
"1.8"
],
"retraction_length": [
"0.8"
],
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
]
}

62
resources/profiles/Elegoo/machine/EOSGIGA/Elegoo OrangeStorm Giga 0.8 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.8 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
]
}
"type": "machine",
"name": "Elegoo OrangeStorm Giga 0.8 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG08",
"instantiation": "true",
"nozzle_diameter": [
"0.8"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "0.8",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
"retraction_minimum_travel": [
"1.6"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.2"
],
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
]
}

62
resources/profiles/Elegoo/machine/EOSGIGA/Elegoo OrangeStorm Giga 1.0 nozzle.json
View File

@@ -1,32 +1,32 @@
{
"type": "machine",
"name": "Elegoo OrangeStorm Giga 1.0 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG10",
"instantiation": "true",
"nozzle_diameter": [
"1.0"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "1.0",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
"retraction_minimum_travel": [
"2.0"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.5"
],
"max_layer_height": [
"0.7"
],
"min_layer_height": [
"0.2"
]
}
"type": "machine",
"name": "Elegoo OrangeStorm Giga 1.0 nozzle",
"inherits": "Elegoo OrangeStorm Giga 0.4 nozzle",
"from": "system",
"setting_id": "EOSG10",
"instantiation": "true",
"nozzle_diameter": [
"1.0"
],
"printer_model": "Elegoo OrangeStorm Giga",
"printer_variant": "1.0",
"default_filament_profile": [
"Elegoo PLA @Elegoo Giga"
],
"default_print_profile": "0.50mm Standard @Elegoo Giga 1.0 nozzle",
"retraction_minimum_travel": [
"2.0"
],
"wipe_distance": [
"2.0"
],
"retraction_length": [
"1.5"
],
"max_layer_height": [
"0.7"
],
"min_layer_height": [
"0.2"
]
}

22
resources/profiles/Elegoo/machine/EOSGIGA/Elegoo OrangeStorm Giga.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Elegoo OrangeStorm Giga",
"model_id": "Elegoo-OrangeStorm-Giga",
"nozzle_diameter": "0.4;0.6;0.8;1.0",
"bed_model": "elegoo_orangestorm_giga_buildplate_model.stl",
"bed_texture": "elegoo_orangestorm_giga_buildplate_texture.png",
"machine_tech": "FFF",
"family": "Elegoo",
"hotend_model": "",
"default_materials": "Elegoo PLA @Elegoo Giga;Elegoo PETG PRO @Elegoo Giga;Elegoo PLA Silk"
}
"type": "machine_model",
"name": "Elegoo OrangeStorm Giga",
"model_id": "Elegoo-OrangeStorm-Giga",
"nozzle_diameter": "0.4;0.6;0.8;1.0",
"bed_model": "elegoo_orangestorm_giga_buildplate_model.stl",
"bed_texture": "elegoo_orangestorm_giga_buildplate_texture.png",
"machine_tech": "FFF",
"family": "Elegoo",
"hotend_model": "",
"default_materials": "Elegoo PLA @Elegoo Giga;Elegoo PETG PRO @Elegoo Giga;Elegoo PLA Silk"
}

280
resources/profiles/Elegoo/machine/fdm_elegoo_3dp_001_common.json
View File

@@ -1,141 +1,141 @@
{
"type": "machine",
"name": "fdm_elegoo_3dp_001_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"auxiliary_fan": "1",
"bed_exclude_area": [
"0x0"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"extruder_colour": [
"#018001"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"retract_lift_below": [
"249"
],
"extruder_clearance_max_radius": "68",
"extruder_clearance_height_to_lid": "90",
"nozzle_volume": "107",
"printer_structure": "corexy",
"best_object_pos": "0.5x0.5",
"retraction_minimum_travel": [
"0.8"
],
"retract_before_wipe": [
"0%"
],
"wipe_distance": [
"1.2"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"320x320",
"160x160"
],
"thumbnails_format": "PNG",
"nozzle_type": "brass",
"single_extruder_multi_material": "1",
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
"change_filament_gcode": "",
"machine_pause_gcode": "M600"
}
"type": "machine",
"name": "fdm_elegoo_3dp_001_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"nozzle_diameter": [
"0.4"
],
"printer_variant": "0.4",
"printable_area": [
"0x0",
"256x0",
"256x256",
"0x256"
],
"auxiliary_fan": "1",
"bed_exclude_area": [
"0x0"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"extruder_colour": [
"#018001"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"500",
"200"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"200"
],
"machine_max_speed_y": [
"500",
"200"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"retract_lift_below": [
"249"
],
"extruder_clearance_max_radius": "68",
"extruder_clearance_height_to_lid": "90",
"nozzle_volume": "107",
"printer_structure": "corexy",
"best_object_pos": "0.5x0.5",
"retraction_minimum_travel": [
"0.8"
],
"retract_before_wipe": [
"0%"
],
"wipe_distance": [
"1.2"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"z_hop_types": [
"Auto Lift"
],
"thumbnails": [
"320x320",
"160x160"
],
"thumbnails_format": "PNG",
"nozzle_type": "brass",
"single_extruder_multi_material": "1",
"machine_end_gcode": ";===== date: 20240510 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y245 F3000\n\nG1 X65 Y245 F12000\nG1 Y245 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n",
"layer_change_gcode": ";LAYER:{layer_num+1}\n",
"change_filament_gcode": "",
"machine_pause_gcode": "M600"
}

276
resources/profiles/Elegoo/machine/fdm_elegoo_common.json
View File

@@ -1,139 +1,139 @@
{
"type": "machine",
"name": "fdm_elegoo_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "fdm_elegoo_common",
"inherits": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"500",
"500"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"500",
"500"
],
"machine_max_acceleration_x": [
"500",
"500"
],
"machine_max_acceleration_y": [
"500",
"500"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printable_height": "280",
"extruder_clearance_radius": "47",
"extruder_clearance_height_to_rod": "34",
"extruder_clearance_height_to_lid": "34",
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"5"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"60"
],
"deretraction_speed": [
"40"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"machine_pause_gcode": "M25 ;pause print",
"wipe": [
"1"
],
"default_filament_profile": [
"Generic PLA @Elegoo"
],
"default_print_profile": "",
"bed_exclude_area": [
"0x0"
],
"machine_start_gcode": "",
"machine_end_gcode": "",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "undefine",
"auxiliary_fan": "0"
}

234
resources/profiles/Elegoo/machine/fdm_machine_common.json
View File

@@ -1,118 +1,118 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"500"
],
"machine_max_acceleration_y": [
"500"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"35"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"default_print_profile": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "",
"machine_end_gcode": ""
}
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"printer_technology": "FFF",
"deretraction_speed": [
"40"
],
"extruder_colour": [
"#FCE94F"
],
"extruder_offset": [
"0x0"
],
"gcode_flavor": "marlin",
"silent_mode": "0",
"machine_max_acceleration_e": [
"5000"
],
"machine_max_acceleration_extruding": [
"500"
],
"machine_max_acceleration_retracting": [
"1000"
],
"machine_max_acceleration_x": [
"500"
],
"machine_max_acceleration_y": [
"500"
],
"machine_max_acceleration_z": [
"500"
],
"machine_max_speed_e": [
"60"
],
"machine_max_speed_x": [
"500"
],
"machine_max_speed_y": [
"500"
],
"machine_max_speed_z": [
"10"
],
"machine_max_jerk_e": [
"5"
],
"machine_max_jerk_x": [
"8"
],
"machine_max_jerk_y": [
"8"
],
"machine_max_jerk_z": [
"0.4"
],
"machine_min_extruding_rate": [
"0"
],
"machine_min_travel_rate": [
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1"
],
"retract_length_toolchange": [
"1"
],
"z_hop": [
"0"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"35"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"wipe": [
"1"
],
"z_lift_type": "NormalLift",
"default_print_profile": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"machine_start_gcode": "",
"machine_end_gcode": ""
}