mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @EC",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @EC",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @EC",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @EC",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @EC",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @EC",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @EC",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @EC",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @EC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @EC",
|
||||
"renamed_from": "Elegoo RAPID PETG @EC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @EC",
|
||||
"renamed_from": "Elegoo RAPID PETG @EC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGEC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,47 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @EC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @EC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @EC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @EC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @EC",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @EC",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AEC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle",
|
||||
"Elegoo Centauri 0.6 nozzle",
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @ECC",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @ECC",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @ECC",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @ECC",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @ECC",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @ECC",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @ECC",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @ECC",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @ECC",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,46 +1,46 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @ECC",
|
||||
"inherits": "Elegoo PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACFECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @ECC",
|
||||
"inherits": "Elegoo PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACFECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @ECC",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @ECC",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,47 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @ECC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @ECC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @ECC",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @ECC",
|
||||
"inherits": "Elegoo TPU 95A @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AECC",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,28 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @ECC2",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "EABSECC2",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @ECC2",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "EABSECC2",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,22 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @ECC2",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @ECC2",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASAECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,70 +1,70 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PAHT-CF @ECC2",
|
||||
"inherits": "Elegoo PAHT @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPAHTCFECC2",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PAHT-CF @ECC2",
|
||||
"inherits": "Elegoo PAHT @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPAHTCFECC2",
|
||||
"instantiation": "true",
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,55 +1,55 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @ECC2",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @ECC2",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,40 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @ECC2",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCFRECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @ECC2",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCFRECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPROECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGTRANSECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGTRANSECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-CF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGCFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-CF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGCFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,43 +1,43 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-GF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG-GF @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGFECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,34 +1,34 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLABASICECC2",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLABASICECC2",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Galaxy @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAGALAXYECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Galaxy @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAGALAXYECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Marble @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMARBLEECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Marble @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMARBLEECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,52 +1,52 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAMECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPROECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,52 +1,52 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.32"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Sparkle @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASPARKLEECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Sparkle @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLASPARKLEECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"220"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Wood @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAWOODECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Wood @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAWOODECC2",
|
||||
"instantiation": "true",
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUSECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACFECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACFECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
@@ -50,12 +50,12 @@
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,50 +1,50 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC2",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,29 +1,29 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid TPU 95A @ECC2",
|
||||
"renamed_from": "Elegoo RAPID TPU 95A @ECC2",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERTPU95AECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid TPU 95A @ECC2",
|
||||
"renamed_from": "Elegoo RAPID TPU 95A @ECC2",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERTPU95AECC2",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @ECC2",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @ECC2",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ETPU95AECC2",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri Carbon 2 0.4 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.6 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @0.2 nozzle",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "EABS00020",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo ABS @0.2 nozzle",
|
||||
"inherits": "Elegoo ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "EABS00020",
|
||||
"instantiation": "true",
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @0.2 nozzle",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASA00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @0.2 nozzle",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASA00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASA00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA",
|
||||
"inherits": "Elegoo ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EASA00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,62 +1,62 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @0.2 nozzle",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPC00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC @0.2 nozzle",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPC00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,47 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @0.2 nozzle",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCFR00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PC-FR @0.2 nozzle",
|
||||
"inherits": "Elegoo PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPCFR00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETG00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETG00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EGPETG00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EGPETG00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPRO00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGPRO00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGTRAN00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Translucent @0.2 nozzle",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPETGTRAN00020",
|
||||
"instantiation": "true",
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLA00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLA00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLABASIC00020",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Basic @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLABASIC00020",
|
||||
"instantiation": "true",
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.024"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,47 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAM00020",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAM00020",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,62 +1,62 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAM00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte",
|
||||
"inherits": "Elegoo PLA Matte @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAM00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPRO00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPRO00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPRO00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA PRO",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPRO00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,47 +1,47 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAS00020",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAS00020",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,59 +1,59 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk",
|
||||
"inherits": "Elegoo PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUS00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUS00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUS00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA+",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLAPLUS00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,62 +1,62 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF",
|
||||
"inherits": "Elegoo PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACF00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF",
|
||||
"inherits": "Elegoo PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLACF00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLA00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "EPLA00",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,36 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG+",
|
||||
"renamed_from": "Elegoo RAPID PETG+",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGPLUS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG+",
|
||||
"renamed_from": "Elegoo RAPID PETG+",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGPLUS00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,36 +1,36 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG",
|
||||
"renamed_from": "Elegoo RAPID PETG",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PETG",
|
||||
"renamed_from": "Elegoo RAPID PETG",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+ @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00020",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"Elegoo Centauri Carbon 2 0.2 nozzle",
|
||||
"Elegoo Neptune 4 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 4 Max 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.2 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,63 +1,63 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+",
|
||||
"renamed_from": "Elegoo RAPID PLA+",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo Rapid PLA+",
|
||||
"renamed_from": "Elegoo RAPID PLA+",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_asa",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_asa",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,160 +1,160 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_pet",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_pet",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_pla",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_pla",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_tpu",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_elegoo_filament_tpu",
|
||||
"inherits": "fdm_elegoo_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"inherits": "Generic ASA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"inherits": "Generic ASA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"inherits": "Generic PETG PRO @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"inherits": "Generic PETG PRO @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"inherits": "Generic PLA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"inherits": "Generic PLA @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,42 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"inherits": "Generic PLA Matte @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"inherits": "Generic PLA Matte @Elegoo",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo OrangeStorm Giga 0.4 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.6 nozzle",
|
||||
"Elegoo OrangeStorm Giga 0.8 nozzle",
|
||||
"Elegoo OrangeStorm Giga 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,45 +1,45 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Elegoo",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic ABS @Elegoo",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,45 +1,45 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic ASA @Elegoo",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic ASA @Elegoo",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,75 +1,75 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,108 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG PRO @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PETG PRO @Elegoo",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "true",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,48 +1,48 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,48 +1,48 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Matte @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Generic PLA Matte @Elegoo",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Elegoo Neptune 0.4 nozzle",
|
||||
"Elegoo Neptune X 0.4 nozzle",
|
||||
"Elegoo Neptune 2 0.4 nozzle",
|
||||
"Elegoo Neptune 2S 0.4 nozzle",
|
||||
"Elegoo Neptune 2D 0.4 nozzle",
|
||||
"Elegoo Neptune 3 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Pro 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Plus 0.4 nozzle",
|
||||
"Elegoo Neptune 3 Max 0.4 nozzle",
|
||||
"Elegoo Neptune 4 (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Max (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Plus (0.8 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.2 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.4 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.6 nozzle)",
|
||||
"Elegoo Neptune 4 Pro (0.8 nozzle)"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"180"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"11"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"180"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,144 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,91 +1,91 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_paht",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PAHT"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_paht",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PAHT"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,67 +1,67 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,94 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"210"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,57 +1,57 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "EC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"default_bed_type": "4",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "EC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"default_bed_type": "4",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.6 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.6 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC06",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.6",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.2"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.8 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri 0.8 nozzle",
|
||||
"inherits": "Elegoo Centauri 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "EC08",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri",
|
||||
"printer_variant": "0.8",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @EC"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"1.6"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri",
|
||||
"model_id": "Elegoo-C",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Elegoo Centauri",
|
||||
"model_id": "Elegoo-C",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Elegoo",
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.2 nozzle",
|
||||
"inherits": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ECC02",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.2",
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @0.2 nozzle"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Elegoo CC 0.2 nozzle",
|
||||
"retraction_minimum_travel": [
|
||||
"0.4"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.06"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,57 +1,57 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "ECC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"default_bed_type": "4",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Elegoo Centauri Carbon 0.4 nozzle",
|
||||
"inherits": "fdm_machine_ecc",
|
||||
"from": "system",
|
||||
"setting_id": "ECC04",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_model": "Elegoo Centauri Carbon",
|
||||
"printer_variant": "0.4",
|
||||
"auxiliary_fan": "1",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"257x0",
|
||||
"257x257",
|
||||
"0x257"
|
||||
],
|
||||
"printable_height": "257",
|
||||
"retract_lift_below": [
|
||||
"255"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"246x0",
|
||||
"256x0",
|
||||
"256x20",
|
||||
"246x20"
|
||||
],
|
||||
"thumbnails": [
|
||||
"144x144"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Elegoo PLA @ECC"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Elegoo CC 0.4 nozzle",
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"default_bed_type": "4",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_load_filament_time": "29",
|
||||
"machine_unload_filament_time": "28",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"scan_first_layer": "1",
|
||||
"upward_compatible_machine": [],
|
||||
"gcode_flavor": "klipper",
|
||||
"change_filament_gcode": "M600",
|
||||
"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": ";;===== date: 20240520 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM106 P2 S255\nM190 S[bed_temperature_initial_layer_single]\nM106 P2 S0\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
|
||||
"machine_end_gcode": ";===== date: 20250109 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG2 I1 J0 Z{max_layer_z+0.5} E-1 F3000 ; lower z a little\nG90\n{if max_layer_z > 50}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user