mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 11:23:42 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,154 +1,154 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D20 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D20",
|
||||
"printer_variant": "0.4",
|
||||
"printer_structure": "hbot",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D20 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D20 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "Dremel",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"230x0",
|
||||
"230x150",
|
||||
"0x150"
|
||||
],
|
||||
"printable_height": "140",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"extruder_clearance_height_to_lid": "101",
|
||||
"extruder_clearance_height_to_rod": "45",
|
||||
"extruder_clearance_radius": "45",
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"Top Only"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6200",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"3000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_start_gcode": "G90\nG28\nM132 X Y Z A\nG1 Z100 F3300\nG1 X-110.5 Y-74 F6000\nM6 T0\nM907 X100 Y100 Z60 A100\nG1 Z0.6 F3300\nG4 P2000\nM108 T0",
|
||||
"machine_end_gcode": "M104 S0 T0\nG1 Z140 F3300\nG28 X0 Y0\nM132 X Y Z A\nG91\nM18",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails": [
|
||||
"96x96",
|
||||
"300x300"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D20 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D20",
|
||||
"printer_variant": "0.4",
|
||||
"printer_structure": "hbot",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D20 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D20 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "Dremel",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"230x0",
|
||||
"230x150",
|
||||
"0x150"
|
||||
],
|
||||
"printable_height": "140",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"extruder_clearance_height_to_lid": "101",
|
||||
"extruder_clearance_height_to_rod": "45",
|
||||
"extruder_clearance_radius": "45",
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"Top Only"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6200",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"3000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_start_gcode": "G90\nG28\nM132 X Y Z A\nG1 Z100 F3300\nG1 X-110.5 Y-74 F6000\nM6 T0\nM907 X100 Y100 Z60 A100\nG1 Z0.6 F3300\nG4 P2000\nM108 T0",
|
||||
"machine_end_gcode": "M104 S0 T0\nG1 Z140 F3300\nG28 X0 Y0\nM132 X Y Z A\nG91\nM18",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails": [
|
||||
"96x96",
|
||||
"300x300"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D20",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d20_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D20",
|
||||
"default_materials": "Dremel Generic PLA @3D20 all"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D20",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d20_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D20",
|
||||
"default_materials": "Dremel Generic PLA @3D20 all"
|
||||
}
|
||||
|
||||
@@ -1,154 +1,154 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D40 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D40",
|
||||
"printer_variant": "0.4",
|
||||
"printer_structure": "hbot",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D40 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D40 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"-127.5x-77.5",
|
||||
"97.5x-77.5",
|
||||
"97.5x77.5",
|
||||
"-127.5x77.5"
|
||||
],
|
||||
"printable_height": "170",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.34"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "101",
|
||||
"extruder_clearance_height_to_rod": "45",
|
||||
"extruder_clearance_radius": "45",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"printer_settings_id": "Dremel",
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"Top Only"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.5"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6200",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"3000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"use_relative_e_distances": "0",
|
||||
"machine_start_gcode": "G90\nG28\nM132 X Y Z A\nG1 Z100 F3300\nG1 X-110.5 Y-74 F6000\nM6 T0\nM907 X100 Y100 Z60 A100\nG1 Z0.6 F3300\nG4 P2000\nM108 T0",
|
||||
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG162 Z F600\nG162 X Y F2000\nM84",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails": [
|
||||
"96x96",
|
||||
"300x300"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D40 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D40",
|
||||
"printer_variant": "0.4",
|
||||
"printer_structure": "hbot",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D40 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D40 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"-127.5x-77.5",
|
||||
"97.5x-77.5",
|
||||
"97.5x77.5",
|
||||
"-127.5x77.5"
|
||||
],
|
||||
"printable_height": "170",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"max_layer_height": [
|
||||
"0.34"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.05"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "101",
|
||||
"extruder_clearance_height_to_rod": "45",
|
||||
"extruder_clearance_radius": "45",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"printer_settings_id": "Dremel",
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"5"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"Top Only"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.5"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6200",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"6200",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"3000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"use_relative_e_distances": "0",
|
||||
"machine_start_gcode": "G90\nG28\nM132 X Y Z A\nG1 Z100 F3300\nG1 X-110.5 Y-74 F6000\nM6 T0\nM907 X100 Y100 Z60 A100\nG1 Z0.6 F3300\nG4 P2000\nM108 T0",
|
||||
"machine_end_gcode": "M104 S0\nM140 S0\nG92 E1\nG1 E-1 F300\nG162 Z F600\nG162 X Y F2000\nM84",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails": [
|
||||
"96x96",
|
||||
"300x300"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D40",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d40_3d45_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D40",
|
||||
"default_materials": "Dremel Generic PLA @3D40 all"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D40",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d40_3d45_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D40",
|
||||
"default_materials": "Dremel Generic PLA @3D40 all"
|
||||
}
|
||||
|
||||
@@ -1,117 +1,117 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D45 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D45",
|
||||
"printer_variant": "0.4",
|
||||
"printer_settings_id": "Dremel",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D45 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D45 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"-127.5x-77.5",
|
||||
"97.5x-77.5",
|
||||
"97.5x77.5",
|
||||
"-127.5x77.5"
|
||||
],
|
||||
"printable_height": "170",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.5"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.34"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"use_relative_e_distances": "0",
|
||||
"machine_start_gcode": "G28; home printer\nG1 Z50.00 F400; pruge line\nG1 F200 E3\nM132 X Y Z A; prepare printer\nM907 X100 Y100 Z50 A100",
|
||||
"machine_end_gcode": "M104 S0; turn off nozzle\nM140 S0; turn off bed\nG92 E1; return print head to home\nG1 E-1 F300\nG162 Z F600\nG162 X Y F2000\nM84; disable stepper motors",
|
||||
"machine_pause_gcode": "G5",
|
||||
"change_filament_gcode": "G5"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Dremel 3D45 0.4 nozzle",
|
||||
"inherits": "fdm_dremel_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Dremel 3D45",
|
||||
"printer_variant": "0.4",
|
||||
"printer_settings_id": "Dremel",
|
||||
"gcode_flavor": "marlin",
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA @3D45 all"
|
||||
],
|
||||
"default_print_profile": ".20mm Standard @Dremel 3D45 0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"-127.5x-77.5",
|
||||
"97.5x-77.5",
|
||||
"97.5x77.5",
|
||||
"-127.5x77.5"
|
||||
],
|
||||
"printable_height": "170",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"extra_loading_move": "-2",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.5"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.34"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"use_relative_e_distances": "0",
|
||||
"machine_start_gcode": "G28; home printer\nG1 Z50.00 F400; pruge line\nG1 F200 E3\nM132 X Y Z A; prepare printer\nM907 X100 Y100 Z50 A100",
|
||||
"machine_end_gcode": "M104 S0; turn off nozzle\nM140 S0; turn off bed\nG92 E1; return print head to home\nG1 E-1 F300\nG162 Z F600\nG162 X Y F2000\nM84; disable stepper motors",
|
||||
"machine_pause_gcode": "G5",
|
||||
"change_filament_gcode": "G5"
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D45",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d45.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D45",
|
||||
"default_materials": "Dremel Generic PLA @3D45 all"
|
||||
}
|
||||
"type": "machine_model",
|
||||
"name": "Dremel 3D45",
|
||||
"nozzle_diameter": "0.4",
|
||||
"family": "Dremel",
|
||||
"bed_model": "dremel_3d45.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"machine_tech": "FFF",
|
||||
"model_id": "Dremel_3D45",
|
||||
"default_materials": "Dremel Generic PLA @3D45 all"
|
||||
}
|
||||
|
||||
@@ -1,138 +1,138 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_dremel_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_dremel_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "47",
|
||||
"extruder_clearance_height_to_rod": "34",
|
||||
"extruder_clearance_height_to_lid": "34",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M25 ;pause print",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Dremel Generic PLA"
|
||||
],
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[bed_temperature_initial_layer] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[nozzle_temperature_initial_layer] ; set final nozzle temp\nM190 S[bed_temperature_initial_layer] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"layer_change_gcode": "",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,120 +1,120 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"support_air_filtration": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"support_air_filtration": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user