mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 03:43:52 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,116 +1,116 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "cubicon common @base",
|
||||
"inherits": "fdm_process_common_klipper",
|
||||
"instantiation": "false",
|
||||
"compatible_printers": [
|
||||
"Cubicon xCeler-I 0.4 nozzle",
|
||||
"Cubicon xCeler-Plus 0.4 nozzle"
|
||||
],
|
||||
"print_settings_id": "cubicon common @base",
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "100",
|
||||
"bridge_angle": "0",
|
||||
"bridge_flow": "0.9",
|
||||
"internal_bridge_flow": "0.9",
|
||||
"brim_type": "no_brim",
|
||||
"detect_overhang_wall": "1",
|
||||
"resolution": "0.012",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"percise_outer_wall": "1",
|
||||
"percise_z_height": "0.2",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"exclude_object": "0",
|
||||
"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
|
||||
"gap_infill_speed": "250",
|
||||
"infill_combination": "1",
|
||||
"infill_direction": "45",
|
||||
"infill_wall_overlap": "15",
|
||||
"infill_anchor": "400%",
|
||||
"infill_anchor_max": "20",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_travel_speed": "500",
|
||||
"slow_down_layers": "1",
|
||||
"only_one_wall_top": "1",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.42",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"print_sequence": "by layer",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"seam_position": "back",
|
||||
"seam_gap": "10%",
|
||||
"enable_arc_fitting": "0",
|
||||
"staggered_inner_seams": "1",
|
||||
"role_based_wipe_speed": "1",
|
||||
"skirt_distance": "2.5",
|
||||
"skirt_height": "1",
|
||||
"skirt_speed": "50",
|
||||
"skirt_start_angle": "-45",
|
||||
"sparse_infill_density": "15",
|
||||
"sparse_infill_speed": "270",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"support_angle": "0",
|
||||
"support_type": "normal(auto)",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_expansion": "0",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_bottom_spacing": "0.5",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_interface_pattern": "rectilinear",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_bottom_interface_spacing": "0",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "200",
|
||||
"top_solid_infill_flow_ratio": "0.9",
|
||||
"travel_speed": "500",
|
||||
"support_threshold_angle": "15",
|
||||
"wall_loops": "2",
|
||||
"thick_bridges": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"slow_down_curled_perimeters": "0",
|
||||
"default_jerk": "9",
|
||||
"top_surface_jerk": "7",
|
||||
"travel_jerk": "12",
|
||||
"infill_jerk": "12",
|
||||
"initial_layer_jerk": "9",
|
||||
"inner_wall_jerk": "7",
|
||||
"outer_wall_jerk": "7",
|
||||
"default_acceleration": "13000",
|
||||
"travel_acceleration": "13000",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"raft_first_layer_density": "90",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"precise_outer_wall": "1",
|
||||
"precise_z_height": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"bridge_speed": "50",
|
||||
"internal_bridge_speed": "150%",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"independent_support_layer_height": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "cubicon common @base",
|
||||
"inherits": "fdm_process_common_klipper",
|
||||
"instantiation": "false",
|
||||
"compatible_printers": [
|
||||
"Cubicon xCeler-I 0.4 nozzle",
|
||||
"Cubicon xCeler-Plus 0.4 nozzle"
|
||||
],
|
||||
"print_settings_id": "cubicon common @base",
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "100",
|
||||
"bridge_angle": "0",
|
||||
"bridge_flow": "0.9",
|
||||
"internal_bridge_flow": "0.9",
|
||||
"brim_type": "no_brim",
|
||||
"detect_overhang_wall": "1",
|
||||
"resolution": "0.012",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"percise_outer_wall": "1",
|
||||
"percise_z_height": "0.2",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"exclude_object": "0",
|
||||
"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
|
||||
"gap_infill_speed": "250",
|
||||
"infill_combination": "1",
|
||||
"infill_direction": "45",
|
||||
"infill_wall_overlap": "15",
|
||||
"infill_anchor": "400%",
|
||||
"infill_anchor_max": "20",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"initial_layer_speed": "60",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"initial_layer_travel_speed": "500",
|
||||
"slow_down_layers": "1",
|
||||
"only_one_wall_top": "1",
|
||||
"inner_wall_speed": "300",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"layer_height": "0.2",
|
||||
"line_width": "0.42",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"print_sequence": "by layer",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"seam_position": "back",
|
||||
"seam_gap": "10%",
|
||||
"enable_arc_fitting": "0",
|
||||
"staggered_inner_seams": "1",
|
||||
"role_based_wipe_speed": "1",
|
||||
"skirt_distance": "2.5",
|
||||
"skirt_height": "1",
|
||||
"skirt_speed": "50",
|
||||
"skirt_start_angle": "-45",
|
||||
"sparse_infill_density": "15",
|
||||
"sparse_infill_speed": "270",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"support_angle": "0",
|
||||
"support_type": "normal(auto)",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_expansion": "0",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_bottom_spacing": "0.5",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_interface_pattern": "rectilinear",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_bottom_interface_spacing": "0",
|
||||
"support_speed": "150",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "200",
|
||||
"top_solid_infill_flow_ratio": "0.9",
|
||||
"travel_speed": "500",
|
||||
"support_threshold_angle": "15",
|
||||
"wall_loops": "2",
|
||||
"thick_bridges": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"slow_down_curled_perimeters": "0",
|
||||
"default_jerk": "9",
|
||||
"top_surface_jerk": "7",
|
||||
"travel_jerk": "12",
|
||||
"infill_jerk": "12",
|
||||
"initial_layer_jerk": "9",
|
||||
"inner_wall_jerk": "7",
|
||||
"outer_wall_jerk": "7",
|
||||
"default_acceleration": "13000",
|
||||
"travel_acceleration": "13000",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"raft_first_layer_density": "90",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"precise_outer_wall": "1",
|
||||
"precise_z_height": "0",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"bridge_speed": "50",
|
||||
"internal_bridge_speed": "150%",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"independent_support_layer_height": "1"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user